summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-24Merge branches 'common/fbdev' and 'common/fbdev-meram' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-05-24fbdev: sh_mobile_lcdc: remove runtime PM calls from the notifierGuennadi Liakhovetski
The notifier function calls sh_mobile_lcdc_stop() and sh_mobile_lcdc_start(), which already take care about the runtime PM state. Remove redundant calls. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev: sh_mobile_lcdc: reduce scope of a variableGuennadi Liakhovetski
The "ret" variable in sh_mobile_lcdc_start() is only used at one location, move its definition to the inner-most scope. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev: sh_mobile_hdmi: runtime suspend HDMI on error and clean up pathsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23ocfs2/dlm: dlm_is_lockres_migrateable() returns booleanSunil Mushran
Patch cleans up the gunk added by commit 388c4bcb4e63e88fb1f312a2f5f9eb2623afcf5b. dlm_is_lockres_migrateable() now returns 1 if lockresource is deemed migrateable and 0 if not. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23ocfs2: Add trace event for trim.Tao Ma
Add the corresponding trace event for trim. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23ocfs2: Add FITRIM ioctl.Tao Ma
Add the corresponding ioctl function for FITRIM. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23ocfs2: Add ocfs2_trim_fs for SSD trim support.Tao Ma
Add ocfs2_trim_fs to support trimming freed clusters in the volume. A range will be given and all the freed clusters greater than minlen will be discarded to the block layer. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23ocfs2: remove the /sys/o2cb symlinkAmerigo Wang
It is obsoleted since Dec 2005. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23ocfs2: clean up mount option about atime in ocfs2.txtTiger Yang
As ocfs2 supports relatime and strictatime, we need update the relative document. Atime_quantum need work with strictatime, so only show it in procfs when mount with strictatime. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-24Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
Conflicts: drivers/video/omap2/dss/dsi.c drivers/video/omap2/dss/dss_features.c drivers/video/omap2/dss/dss_features.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2011-05-24efifb: fix int to pointer cast warningKonstantin Khlebnikov
drivers/video/efifb.c:247: warning: cast to pointer from integer of different size Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24mailmap: Add entry for Damian Hobson-Garcia.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: switch mackerel to dynamically manage the platform cameraGuennadi Liakhovetski
Use soc_camera_platform helper functions to dynamically manage the camera device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest
2011-05-24sh: add MMCIF runtime PM support on ecovecGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24sh: switch ap325rxa to dynamically manage the platform cameraGuennadi Liakhovetski
Use soc_camera_platform helper functions to dynamically manage the camera device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24m68knommu: Use generic show_interrupts()Geert Uytterhoeven
Apart from whitespace differences, /proc/interrupts doesn't change by enabling GENERIC_IRQ_SHOW. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24coldfire_qspi compile fixSteven King
The m68k/m68knommu merge broke the qspi build. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68k: merge the mmu and non-mmu versions of sys_m68k.cGreg Ungerer
There is a lot of common code in the sys_m68k.c files. The mmu and non-mmu versions can easily be merged into a single file. There is really only 2 functions that differ in the 2 cases. A single ifdef on CONFIG_MMU can take care of this. Alternatively we could break those 2 functions out and maintain sys_m68k_no.c and sys_m68k_mm.c with just this code in it (Makefile could then just build the right one). Does anyone have strong feelings on which way they want this done? Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68knommu: use asm-generic/bitops/ext2-atomic.hAkinobu Mita
m68knommu can use generic implementation of ext2 atomic bitops. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68knommu: Remove obsolete #include <linux/sys.h>Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68k: merge mmu and non-mmu versions of asm-offsets.cGreg Ungerer
It is strait forward to merge the mmu and non-mmu versions of asm-offstes.c. Some name changes are required for the preempt and thread_info.flags in the non-mmu entry.S assembler to make them consistent for both setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24net: convert %p usage to %pKDan Rosenberg
The %pK format specifier is designed to hide exposed kernel pointers, specifically via /proc interfaces. Exposing these pointers provides an easy target for kernel write vulnerabilities, since they reveal the locations of writable structures containing easily triggerable function pointers. The behavior of %pK depends on the kptr_restrict sysctl. If kptr_restrict is set to 0, no deviation from the standard %p behavior occurs. If kptr_restrict is set to 1, the default, if the current user (intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG (currently in the LSM tree), kernel pointers using %pK are printed as 0's. If kptr_restrict is set to 2, kernel pointers using %pK are printed as 0's regardless of privileges. Replacing with 0's was chosen over the default "(null)", which cannot be parsed by userland %p, which expects "(nil)". The supporting code for kptr_restrict and %pK are currently in the -mm tree. This patch converts users of %p in net/ to %pK. Cases of printing pointers to the syslog are not covered, since this would eliminate useful information for postmortem debugging and the reading of the syslog is already optionally protected by the dmesg_restrict sysctl. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: James Morris <jmorris@namei.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Thomas Graf <tgraf@infradead.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Kees Cook <kees.cook@canonical.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24net/irda: convert bfin_sir to common Blackfin UART headerMike Frysinger
No need to duplicate these defines now that the common Blackfin code has unified these for all UART devices. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24ipv6: Fix return of xfrm6_tunnel_rcv()David S. Miller
Like ipv4, just return xfrm6_rcv_spi()'s return value directly. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Ignore R_SH_NONE module relocations. SH: SE7751: Fix pcibios_map_platform_irq prototype. sh: remove warning and warning_symbol from struct stacktrace_ops sh: wire up sys_sendmmsg. clocksource: sh_tmu: Runtime PM support clocksource: sh_tmu: __clocksource_updatefreq_hz() update clocksource: sh_cmt: Runtime PM support clocksource: sh_cmt: __clocksource_updatefreq_hz() update dmaengine: shdma: synchronize RCU before freeing, simplify spinlock dmaengine: shdma: add runtime- and system-level power management dmaengine: shdma: fix locking sh: sh-sci: sh7377 and sh73a0 build fixes sh: cosmetic improvement: use an existing pointer serial: sh-sci: suspend/resume wakeup support V2 serial: sh-sci: Runtime PM support sh: select IRQ_FORCED_THREADING. sh: intc: Set virtual IRQs as nothread. sh: fixup fpu.o compile order i2c: add a module alias to the sh-mobile driver ALSA: add a module alias to the FSI driver ...
2011-05-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix sample type size calculation in 32 bits archs profile: Use vzalloc() rather than vmalloc() & memset()
2011-05-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits) [media] gspca - sunplus: Fix some warnings and simplify code [media] gspca: Fix some warnings tied to 'no debug' [media] gspca: Unset debug by default [media] gspca - cpia1: Remove a bad conditional compilation instruction [media] gspca - main: Remove USB traces [media] gspca - main: Version change to 2.13 [media] gspca - stk014 / t613: Accept the index 0 in querymenu [media] gspca - kinect: Remove __devinitdata [media] gspca - cpia1: Fix some warnings [media] video/Kconfig: Fix mis-classified devices [media] support for medion dvb stick 1660:1921 [media] tm6000: fix uninitialized field, change prink to dprintk [media] cx231xx: Add support for Iconbit U100 [media] saa7134 add new TV cards [media] Use a more consistent value for RC repeat period [media] cx18: Move spinlock and vb_type initialisation into stream_init [media] tm6000: remove tm6010 sif audio start and stop [media] tm6000: remove unused exports [media] tm6000: add pts logging [media] tm6000: change from ioctl to unlocked_ioctl ...
2011-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: Fix statfs->f_namelen fat: Replace all printk with fat_msg() fat: Add fat_msg() function for preformated FAT messages fat: Convert fat_fs_error to use %pV fat: Fix possible null deref in fat_cache_add() fat: use new setup() for ->dir_ops too
2011-05-23hwmon: (coretemp) Add comments describing the handling of HT CPUsGuenter Roeck
The coretemp driver provides a single set of device attributes for each physical core of a HT CPU to avoid duplicate sensors. This functionality was introduced with commit d883b9f09772 ("hwmon: (coretemp) Skip duplicate CPU entries"). Commit e40cc4bdfd4b ("x86/hwmon: register alternate sibling upon CPU removal") extends this functionality to register the HT sibling of a CPU which is taken offline, to ensure that sensor attributes are provided if at least one HT sibling of a core is online. Add comments into the code describing the functionality in some more detail. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23kernel/watchdog.c: Use proper ANSI C prototypesLinus Torvalds
We try to enforce it by using -Wstrict-prototypes, but apparently they sometimes get through. Introduced by 4eec42f39204 ("watchdog: Change the default timeout and configure nmi watchdog period based"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-24watchdog: Fix non-standard prototype of get_softlockup_thresh()Ingo Molnar
This build warning slipped through: kernel/watchdog.c:102: warning: function declaration isn't a prototype As reported by Stephen Rothwell. Also address an unused variable warning that GCC 4.6.0 reports: we cannot do anything about failed watchdog ops during CPU hotplug (it's not serious enough to return an error from the notifier), so ignore them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110524134129.8da27016.sfr@canb.auug.org.au Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-24ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0Magnus Damm
Add SDHI0 and SDHI1 support to the AG5EVM board including platform data, pinmux configuration and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: arch-shmobile: Use multiple irq vectors for SDHISimon Horman
This patch reverts "ARM: mach-shmobile: sh7372 SDHI vector merge" and supplies 3 IRQ resources for each SDHI block. Some blocks have a 4th IRQ, but this is used for DRM feathres that I do not have access tot he documentation for and are almost certainly tainted by licensing issues. So the 4th IRQ is not hooked-up even if it exists. Cc: Chris Ball <cjb@laptop.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: AG5EVM DSI resource string updateMagnus Damm
Update the struct resources for DSI0 to include the hardware block name. Purely cosmetic, makes /proc/iomem look slightly better. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: sh73a0 twd_base fixMagnus Damm
Fix the case of too late twd_base initialization for SMP on sh73a0 which bas been broken because sh73a0 specific smp_prepare_cpu() and percpu_timer_setup() changed order in the commits: 05c74a6cbcfb416286a947668ba32f63d99fe74a c413521eb4e2d7ffd5ce432a144708d479054bd3 Without this fix the sh73a0 SMP kernel panics on boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: headsmp.S build fixMagnus Damm
Git commit f4117ac9e237b74afdf5e001d5ea26a4d15e9847 introduced PLAT_PHYS_OFFSET, but headsmp.S was left unchanged which results in a compile error: AS arch/arm/mach-shmobile/headsmp.o arch/arm/mach-shmobile/headsmp.S: Assembler messages: arch/arm/mach-shmobile/headsmp.S:27: Error: undefined symbol `secondary_startup' in operation arch/arm/mach-shmobile/headsmp.S:27: Error: undefined symbol `PHYS_OFFSET' in operation make[1]: *** [arch/arm/mach-shmobile/headsmp.o] Error 1 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: Disable sh7372 RT side MSTP bitsMagnus Damm
Update the sh7372 clock code to set the RT side set of MSTP bits to a fixed disabled state. The sh7372 SoC contains two sets of MSTP bits, one for the ARM (SYS) side, and one for the SH4AL-DSP (RT) side. The actual clock associated with the MSTP bit will only be stopped when both sides have set the MSTP bit to disabled mode. Some MSTP bits are enabled by default after hardware reset, so this patch adjusts the code to disable all MSTP bits associated with the RT side to allow the SYS side to have full control. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: PLL does not have to run constantly for HDMIGuennadi Liakhovetski
The PLLC2 clock on AP4 systems does not need to run constantly to be able to use HDMI. The HDMI hotplug interrupt works without the PLL too, after which all the necessary clocks will be turned on by the runtime PM. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: add DMA for MMCIF on mackerelGuennadi Liakhovetski
Add DMA mode support for the MMCIF controller on mackerel. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: MMCIF on mackerel can also be a moduleGuennadi Liakhovetski
Remember to also check for the CONFIG_MMC_SH_MMCIF_MODULE option for the case of a modular MMCIF driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: sh7377 UIO platform data V3Magnus Damm
Export the following sh7377 multimedia hardware blocks using UIO: VPU, VEU[0-3], JPU and SPU2[0-1] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: sh7372 UIO platform data V3Magnus Damm
Export the following sh7372 multimedia hardware blocks using UIO: VPU, VEU[0-3], JPU and SPU2[0-1] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: sh7367 UIO platform data V3Magnus Damm
Export the following sh7367 multimedia hardware blocks using UIO: VPU, VEU[0-3], VEU2H, JPU and SPU1 Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: Use SCIFA and SCIFB port types on sh7377Magnus Damm
Update the sh7377 serial port types to make use of PORT_SCIFA and PORT_SCIFB. This makes the software match the sh7377 data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: ap4evb, mackerel: fixup scif initialisation for zbootSimon Horman
* Set receive enable and transmit enable bits of SCASCR0 (E6C400089). Values previously written to this register was bogus. Curiously earlyprintk works with the previous code. * Remove duplicate initialisation of GPIO port 152, SCIFA0_TXD (0xE6053098). This should have no effect other than to very slightly reduce the amount of code. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24cifs: don't call mid_q_entry->callback under the Global_MidLock (try #5)Jeff Layton
Minor revision to the last version of this patch -- the only difference is the fix to the cFYI statement in cifs_reconnect. Holding the spinlock while we call this function means that it can't sleep, which really limits what it can do. Taking it out from under the spinlock also means less contention for this global lock. Change the semantics such that the Global_MidLock is not held when the callback is called. To do this requires that we take extra care not to have sync_mid_result remove the mid from the list when the mid is in a state where that has already happened. This prevents list corruption when the mid is sitting on a private list for reconnect or when cifsd is coming down. Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-24CIFS: Simplify mount code for further shared sb capabilityPavel Shilovsky
Reorganize code to get mount option at first and when get a superblock. This lets us use shared superblock model further for equal mounts. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-23 00:47:54 +0000