summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-31drm/i915: remove unused is_cpu_edp()Imre Deak
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: replace is_cpu_edp() with a check for port AImre Deak
The patch changes all remaining is_cpu_edp() check with a check for port A. We can do this, since in all these cases ValleyView is handled separately and port A is always a CPU side eDP port. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: merge VLV eDP and DP AUX clock divider calculationImre Deak
On ValleyView for both eDP and DP the AUX input clock is 200MHz, so we can calculate for both the clock divider for the 2MHz target rate at the same place. Afterwards we can also replace the is_cpu_edp() check with a check for port A. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: stop using is_cpu_edp() in intel_disable/post_disable_dpImre Deak
Based on 3739850b46f - "drm/i915: disable the cpu edp port after the cpu pipe" and the bspec disabling sequence for IVB and older it seems we have to distinguish only the CPU vs. PCH port case, whether it's a DP or eDP doesn't seem to matter. For IVB and older on the CPU side we can only have eDP on port A, DP ports can only be on the PCH side. On VLV we have only CPU side eDP/DP ports, no PCH. So the condition for the disabling sequence we need for CPU ports is port == A || IS_VLV. This allows us to remove is_cpu_edp() completely in a later patch. v2: - simplify (and fix) the condition for CPU side ports and adjust the commit message accordingly (Daniel) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: release scratch page at module unloadImre Deak
Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: Call context fini at cleanupBen Widawsky
If contexts were actually initialized, and we fail somewhere later during init this would possibly leak memory, and lead to some error messages about unclean takedown. As the odds of this occurring, and someone actually caring/noticing are pretty slim, the patch isn't terribly important. Found by code inspection while working on something else. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: context debug messagesBen Widawsky
Add some debug messages to help figure out what goes wrong on context initialization. Later in the PPGTT series, I ended up having a lot of failures after reset. In many cases it was extra difficult to debug because I hadn't even realized that contexts failed to reinitialize after reset (again an artifact of some later patches). This fairly benign patch does help debug some potential issues which arise later. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: use drm_mm_takedownBen Widawsky
I noticed this while doing the VMA abstraction. AFAICT, it won't actually fix anything, but it is the correct thing to do. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: use mappable size for fb kickoutBen Widawsky
The GTT start is either 0 in the KMS case, or some value which is set only after the init IOCTL in the UMS case. In both cases, we don't have this information until after we've tried to kick out the firmware fb. This patch should have no functional change since we kzalloc the GTT struct anyway. It only clarifies the situation for people who end up having to look at that code. This weirdness was introduced in: commit 93d187993b783c68383a884091a600d9ad499ea6 Author: Ben Widawsky <ben@bwidawsk.net> Date: Thu Jan 17 12:45:17 2013 -0800 drm/i915: Remove use of gtt_mappable_entries Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: pre-fixes for checkpatchBen Widawsky
Since I'll need to modify i915_gem_object_bind_to_gtt(), fix the errors now to get checkpatch to not complain. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Resolve conflict with Chris' improved debug output, and bikeshed the new variable with s/max/gtt_max/ a bit while at it.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: Fix error state memory leaksBen Widawsky
Found with kmemleak. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: introduce i915_hangcheck_ring_hungMika Kuoppala
In preparation to track per ring progress in hangcheck, add i915_hangcheck_ring_hung. v2: omit dev parameter (Ben Widawsky) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: track ring progression using seqnosMika Kuoppala
Instead of relying in acthd, track ring seqno progression to detect if ring has hung. v2: put hangcheck stuff inside struct (Chris Wilson) v3: initialize hangcheck.seqno (Ben Widawsky) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: pass seqno to i915_hangcheck_ring_idleMika Kuoppala
In preparation for next commit, pass seqno as a parameter to i915_hangcheck_ring_idle as it will be used inside i915_hangcheck_elapsed. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: add haswell_update_sprite_wmPaulo Zanoni
On Haswell, whenever we change the sprites we need to completely recalculate all the watermarks, because the sprites are one of the parameters to the LP watermarks, so a change on the sprites may trigger a change on which LP levels are enabled. So on this commit we store all the parameters we need to store for proper recalculation of the Haswell WMs and then call haswell_update_wm. Notice that for now our haswell_update_wm function is not really using these parameters we're storing, but on the next commits we'll use these parameters. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31drm/i915: add "enable" argument to intel_update_sprite_watermarksPaulo Zanoni
Because we want to call it from the "sprite disable" paths, since on Haswell we need to update the sprite watermarks when we disable sprites. For now, all this patch does is to add the "enable" argument and call intel_update_sprite_watermarks from inside ivb_disable_plane. This shouldn't change how the code behaves because on sandybridge_update_sprite_wm we just ignore the "!enable" case. The patches that implement Haswell watermarks will make use of the changes introduced by this patch. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31Update eCryptFS maintainersDustin Kirkland
Remove myself from the eCryptFS kernel maintainers. Add the ecryptfs.org website. I will continue to actively maintain and monitor the ecryptfs-utils user space project and packages. Signed-off-by: Dustin Kirkland <dustin.kirkland@gazzang.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2013-05-31NVMe: Add MSI supportRamachandra Rao Gajula
Some devices only have support for MSI, not MSI-X. While MSI is more limited, it still provides better performance than line-based interrupts. Signed-off-by: Ramachandra Gajula <rama@fastorsystems.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-05-31s390/pgtable: Fix gmap notifier addressChristian Borntraeger
The address of the gmap notifier was broken, resulting in unhandled validity intercepts in KVM. Fix the rmap->vmaddr to be on a segment boundary. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-31s390/dasd: fix handling of gone pathsStefan Weinhuber
When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-31arm64: don't kill the kernel on a bad esr from el0Mark Rutland
Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org
2013-05-31arm64: treat unhandled compat el0 traps as undefMark Rutland
Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen <Johannes.Jensen@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-05-31tick: Remove useless timekeeping duty attribution to broadcast sourceJiri Bohac
Since 7300711e ("clockevents: broadcast fixup possible waiters"), the timekeeping duty is assigned to the CPU that handles the tick broadcast clock device by the time it is set in one shot mode. This is an issue in full dynticks mode where the timekeeping duty must stay handled by the boot CPU for now. Otherwise it prevents secondary CPUs from offlining and this breaks suspend/shutdown/reboot/... As it appears there is no reason for this timekeeping duty to be moved to the broadcast CPU, besides nothing prevent it from being later re-assigned to another target, let's simply remove it. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reported-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31sched/x86: Construct all sibling maps if smtAndrew Jones
Commit 316ad248307fb ("sched/x86: Rewrite set_cpu_sibling_map()") broke the construction of sibling maps, which also broke the booted_cores accounting. Before the rewrite, if smt was present, then each map was updated for each smt sibling. After the rewrite only cpu_sibling_mask gets updated, as the llc and core maps depend on 'has_mc = x86_max_cores > 1' instead. This leads to problems with topologies like the following (qemu -smp sockets=2,cores=1,threads=2) processor : 0 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 1 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 processor : 2 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 3 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 This patch restores the former construction by defining has_mc as (has_smt || x86_max_cores > 1). This should be fine as there were no (has_smt && !has_mc) conditions in the context. Aso rename has_mc to has_mp now that it's not just for cores. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: a.p.zijlstra@chello.nl Cc: fenghua.yu@intel.com Link: http://lkml.kernel.org/r/1369831695-11970-1-git-send-email-drjones@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.10 stream... Regarding the NFC bits, Samuel says: "This is the first batch of NFC fixes for 3.10, and it contains: - 3 fixes for the NFC MEI support: * We now depend on the correct Kconfig symbol. * We register an MEI event callback whenever we enable an NFC device, otherwise we fail to read anything after an enable/disable cycle. * We only disable an MEI device from its disable mey_phy_ops, preventing useless consecutive disable calls. - An NFC Makefile cleanup, as I forgot to remove a commented out line when moving the LLCP code to the NFC top level directory." As for the mac80211 bits, Johannes says: "This time I have a fix from Stanislaw for a stupid mistake I made in the auth/assoc timeout changes, a fix from Felix for 64-bit traffic counters and one from Helmut for address mask handling in mac80211. I also have a few fixes myself for four different crashes reported by a few people." And Johannes says this about the iwlwifi bit: "This fixes a brown paper-bag bug that we really should've caught in review. More details in the changelog for the fix." On top of that... Arend van Spriel and Hante Meuleman cooperate to send a series of AP and P2P mode fixes for brcmfmac. Gabor Juhos corrects a register offset for AR9550, avoiding a bus error. Dan Carpenter provides a fixup to some dmesg output in the atmel driver. And, finally... Felix Fietkau not only gives us a trio of small AR934x fixes, but also refactors the ath9k aggregation session start/stop handling (using the generic mac80211 support) in order to avoid a deadlock. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31nohz: Fix notifier return val that enforce timekeepingLi Zhong
In tick_nohz_cpu_down_callback() if the cpu is the one handling timekeeping, we must return something that stops the CPU_DOWN_PREPARE notifiers and then start notify CPU_DOWN_FAILED on the already called notifier call backs. However traditional errno values are not handled by the notifier unless these are encapsulated using errno_to_notifier(). Hence the current -EINVAL is misinterpreted and converted to junk after notifier_to_errno(), leaving the notifier subsystem to random behaviour such as eventually allowing the cpu to go down. Fix this by using the standard NOTIFY_BAD instead. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31kvm: Move guest entry/exit APIs to context_trackingFrederic Weisbecker
The kvm_host.h header file doesn't handle well inclusion when archs don't support KVM. This results in build crashes for such archs when they want to implement context tracking because this subsystem includes kvm_host.h in order to implement the guest_enter/exit APIs but it doesn't handle KVM off case. To fix this, move the guest_enter()/guest_exit() declarations and generic implementation to the context tracking headers. These generic APIs actually belong to this subsystem, besides other domains boundary tracking like user_enter() et al. KVM now properly becomes a user of this library, not the other buggy way around. Reported-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31vtime: Use consistent clocks among nohz accountingFrederic Weisbecker
While computing the cputime delta of dynticks CPUs, we are mixing up clocks of differents natures: * local_clock() which takes care of unstable clock sources and fix these if needed. * sched_clock() which is the weaker version of local_clock(). It doesn't compute any fixup in case of unstable source. If the clock source is stable, those two clocks are the same and we can safely compute the difference against two random points. Otherwise it results in random deltas as sched_clock() can randomly drift away, back or forward, from local_clock(). As a consequence, some strange behaviour with unstable tsc has been observed such as non progressing constant zero cputime. (The 'top' command showing no load). Fix this by only using local_clock(), or its irq safe/remote equivalent, in vtime code. Reported-by: Mike Galbraith <efault@gmx.de> Suggested-by: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31ALSA: hda - Add headset quirk for two Dell machinesDavid Henningsson
This quirk is required for the headset mic to work on these two machines. BugLink: https://bugs.launchpad.net/bugs/1186170 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-31m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTKFinn Thain
The present code does not wait for the SCC to finish resetting itself before trying to initialise the device. The result is that the SCC interrupt sources become enabled (if they weren't already). This leads to an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix this by adding a delay. A successful reset disables the interrupt sources. Also, after the reset for channel A setup, the SCC then gets a second reset for channel B setup which leaves channel A uninitialised again. Fix this by performing the reset only once. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-31iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handlingNicholas Bellinger
With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31target: Propigate up ->cmd_kref put return via transport_generic_free_cmdNicholas Bellinger
Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31ALSA: hda - add dock support for Thinkpad T431sEbben Aries
Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station. Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3 Signed-off-by: Ebben Aries <earies@dscp.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-31ALSA: sis7019: fix error return code in sis_chip_create()Wei Yongjun
Fix to return a negative error code in the pci_set_dma_mask() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-31Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "One qxl 32-bit warning fix, the rest is a bunch of radeon fixes from Alex for some issues we've been seeing." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: fix build warnings on 32-bit radeon: use max_bus_speed to activate gen2 speeds drm/radeon: narrow scope of Apple re-POST hack drm/radeon: don't check crtcs in card_posted() on cards without DCE drm/radeon: fix card_posted check for newer asics drm/radeon: fix typo in cu_per_sh on verde drm/radeon: UVD block on SUMO2 is the same as on SUMO
2013-05-31drm: Don't leak phys_wc "handles" to userspaceAndy Lutomirski
I didn't fix this in the earlier patch -- it would have broken the build due to the now-deleted garbage in drm_os_linux.h. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31drm: Remove mtrr_add and mtrr_del fallback hack for non-MTRR systemsAndy Lutomirski
There are no users left in drivers/gpu. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31uvesafb: Clean up MTRR codeAndy Lutomirski
The old code allowed very strange memory types. Now it works like all the other video drivers: ioremap_wc is used unconditionally, and MTRRs are set if PAT is unavailable (unless MTRR is disabled by a module parameter). UC, WB, and WT support is gone. If there are MTRR conflicts that prevent addition of a WC MTRR, adding a non-conflicting MTRR is pointless; it's better to just turn off MTRR support entirely. As an added bonus, any MTRR added is freed on unload. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31radeon: Switch to arch_phys_wc_add and add a missing ..._delAndy Lutomirski
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31i915: Use arch_phys_wc_{add,del}Andy Lutomirski
i915 open-coded logic that was essentially equivalent to the new API. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31drm, agpgart: Use pgprot_writecombine for AGP maps and make the MTRR optionalAndy Lutomirski
I'm not sure I understand the intent of the previous behavior. mmap on /dev/agpgart and DRM_AGP maps had no cache flags set, so they would be fully cacheable. But the DRM code (most of the time) would add a write-combining MTRR that would change the effective memory type to WC. The new behavior just requests WC explicitly for all AGP maps. If there is any code out there that expects cacheable access to the AGP aperture (because the drm driver doesn't request an MTRR or because it's using /dev/agpgart directly), then it will now end up with a UC or WC mapping, depending on the architecture and PAT availability. But cacheable access to the aperture seems like it's asking for trouble, because, AIUI, the aperture is an alias of RAM. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31drm: Update drm_addmap and drm_mmap to use PAT WC instead of MTRRsAndy Lutomirski
Previously, DRM_FRAME_BUFFER mappings, as well as DRM_REGISTERS mappings with DRM_WRITE_COMBINING set, resulted in an unconditional MTRR being added but the actual mappings being created as UC-. Now these mappings have the MTRR added only if needed, but they will be mapped with pgprot_writecombine. The non-WC DRM_REGISTERS case now uses pgprot_noncached instead of hardcoding the bit twiddling. The DRM_AGP case is unchanged for now. [airlied: fix ppc build] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31drm (ast, cirrus, mgag200, nouveau, savage, vmwgfx): Remove drm_mtrr_{add, del}Andy Lutomirski
This replaces drm_mtrr_{add,del} with arch_phys_wc_{add,del}. The interface is simplified (because the base and size parameters to drm_mtrr_del never did anything), and it no longer adds MTRRs on systems that don't need them. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31Add arch_phys_wc_{add, del} to manipulate WC MTRRs if neededAndy Lutomirski
Several drivers currently use mtrr_add through various #ifdef guards and/or drm wrappers. The vast majority of them want to add WC MTRRs on x86 systems and don't actually need the MTRR if PAT (i.e. ioremap_wc, etc) are working. arch_phys_wc_add and arch_phys_wc_del are new functions, available on all architectures and configurations, that add WC MTRRs on x86 if needed (and handle errors) and do nothing at all otherwise. They're also easier to use than mtrr_add and mtrr_del, so the call sites can be simplified. As an added benefit, this will avoid wasting MTRRs and possibly warning pointlessly on PAT-supporting systems. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31Merge tag 'drm-intel-next-2013-05-20-merged' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: Highlights (copy-pasted from my testing cycle mails): - fbc support for Haswell (Rodrigo) - streamlined workaround comments, including an igt tool to grep for them (Damien) - sdvo and TV out cleanups, including a fixup for sdvo multifunction devices - refactor our eDP mess a bit (Imre) - don't register the hdmi connector on haswell when desktop eDP is present - vlv support is no longer preliminary! - more vlv fixes from Jesse for stolen and dpll handling - more flexible power well checking infrastructure from Paulo - a few gtt patches from Ben - a bit of OCD cleanups for transcoder #defines and an assorted pile of smaller things. - fixes for the gmch modeset sequence - a bit of OCD around plane/pipe usage (Ville) - vlv turbo support (Jesse) - tons of vlv modeset fixes (Jesse et al.) - vlv pte write fixes (Kenneth Graunke) - hpd filtering to avoid costly probes on unaffected outputs (Egbert Eich) - intel dev_info cleanups and refactorings (Damien) - vlv rc6 support (Jesse) - random pile of fixes around non-24bpp modes handling - asle/opregion cleanups and locking fixes (Jani) - dp dpll refactoring - improvements for reduced_clock computation on g4x/ilk+ - pfit state refactored to use pipe_config (Jesse) - lots more computed modeset state moved to pipe_config, including readout and cross-check support - fdi auto-dithering for ivb B/C links, using the neat pipe_config improvements - drm_rect helpers plus sprite clipping fixes (Ville) - hw context refcounting (Mika + Ben) * tag 'drm-intel-next-2013-05-20-merged' of git://people.freedesktop.org/~danvet/drm-intel: (155 commits) drm/i915: add support for dvo Chrontel 7010B drm/i915: Use pipe config state to control gmch pfit enable/disable drm/i915: Use pipe_config state to disable ilk+ pfit drm/i915: panel fitter hw state readout&check support drm/i915: implement WADPOClockGatingDisable for LPT drm/i915: Add missing platform tags to FBC workaround comments drm/i915: rip out an unused lvds_reg variable drm/i915: Compute WR PLL dividers dynamically drm/i915: HSW FBC WaFbcDisableDpfcClockGating drm/i915: HSW FBC WaFbcAsynchFlipDisableFbcQueue drm/i915: Enable FBC at Haswell. drm/i915: IVB FBC WaFbcDisableDpfcClockGating drm/i915: IVB FBC WaFbcAsynchFlipDisableFbcQueue drm/i915: Add support for FBC on Ivybridge. drm/i915: Organize VBT stuff inside drm_i915_private drm/i915: make SDVO TV-out work for multifunction devices drm/i915: rip out now unused is_foo tracking from crtc code drm/i915: rip out TV-out lore ... drm/i915: drop TVclock special casing on ilk+ drm/i915: move sdvo TV clock computation to intel_sdvo.c ...
2013-05-31drm/qxl: fix build warnings on 32-bitDave Airlie
Just the usual printk related warnings. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-30clk: mxs: Include clk mxs header fileFabio Estevam
Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed $SUBJECT line]
2013-05-30iscsi-target: fix heap buffer overflow on errorKees Cook
If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31Merge branch 'for-3.10' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "A couple minor fixes for the (new to 3.10) gss-proxy code. And one regression from user-namespace changes. (XBMC clients were doing something admittedly weird--sending -1 gid's--but something that we used to allow.)" * 'for-3.10' of git://linux-nfs.org/~bfields/linux: svcrpc: fix failures to handle -1 uid's and gid's svcrpc: implement O_NONBLOCK behavior for use-gss-proxy svcauth_gss: fix error code in use_gss_proxy()
2013-05-30target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK exportNicholas Bellinger
This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reported-by: Badari Pulavarty <pbadari@us.ibm.com> Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit (git 2.34.1) at 2025-09-15 08:42:21 +0000