| Age | Commit message (Collapse) | Author |
|---|
|
Make it possible to find the afs_volume structs that are using an
afs_server struct to aid in breaking volume callbacks.
The way this is done is that each afs_volume already has an array of
afs_server_entry records that point to the servers where that volume might
be found. An afs_volume backpointer and a list node is added to each entry
and each entry is then added to an RCU-traversable list on the afs_server
to which it points.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Combine the endpoint state bool-type members into a bitmask so that some of
them can be waited upon more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Keep a record of the current fileserver endpoint state, including the probe
state, and replace it when a new probe is started rather than just
squelching the old state and overwriting it. Clearance of the old state
can cause a race if there's another thread also currently trying to
communicate with that server.
It appears that this race might be the culprit for some occasions where
kafs complains about invalid data in the RPC reply because the rotation
algorithm fell all the way through without actually issuing an RPC call and
the error return got filled in from the probe state (which has a zero error
recorded). Whatever happens to be in the caller's reply buffer is then
taken as the response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a volume location server, dispatch them
in order of descending priority to try and get back highest priority one
first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a fileserver, dispatch them in order of
descending priority to try and get back highest priority one first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add a field to each address in an address list (afs_addr_list struct) that
records the current priority for that address according to the address
preference table. We don't want to do this every time we use an address
list, so the version number of the address preference table is recorded in
the address list too and we only re-mark the list when we see the version
change.
These numbers are then displayed through /proc/net/afs/servers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS servers may have multiple addresses, but the client can't easily judge
between them as to which one is best. For instance, an address that has a
larger RTT might actually have a better bandwidth because it goes through a
switch rather than being directly connected - but we can't work this out
dynamically unless we push through sufficient data that we can measure it.
To allow the administrator to configure this, add a list of preference
weightings for server addresses by IPv4/IPv6 address or subnet and allow
this to be viewed through a procfile and altered by writing text commands
to that same file. Preference rules can be added/updated by:
echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs
echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs
and removed by:
echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs
echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs
where the priority is a number between 0 and 65535.
The list is split between IPv4 and IPv6 addresses and each sublist is kept
in numerical order, with rules that would otherwise match but have
different subnet masking being ordered with the most specific submatch
first.
A subsequent patch will apply these rules.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Remove afs_cmp_addr_list() as it was never implemented.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
In /proc/net/afs/servers, show the cell name and the last error for each
address in the server's list.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I am stepping down as TJA11XX C45 maintainer.
Andrei Botila will take the responsibility to maintain and improve the
support for TJA11XX C45 PHYs.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for client processors starting from Kaby Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231222203957.1348043-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It seems traffic there is quite low and changes are often not related
to PDx86 anyhow. Besides that I have a lot of other stuff to do, I'm
rearly pay attention on these emails. Doesn't seem Daren to be active
either. With this in mind, remove (stale) section.
Note, it might be make sense to actually move that folder under PDx86
umbrella (in MAINTAINERS) if people find it suitable. That will reduce
burden on arch/x86 maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231222144453.2888706-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The freeing and re-allocation of algorithm are protected by cpool_mutex,
so it doesn't fix an actual use-after-free, but avoids a deserved
refcount_warn_saturate() warning.
A trivial fix for the racy behavior.
Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
When parsing emails from .yaml files in particular, stray punctuation
such as a leading '-' can end up in the name. For example, consider a
common YAML section such as:
maintainers:
- devicetree@vger.kernel.org
This would previously be processed by get_maintainer.pl as:
- <devicetree@vger.kernel.org>
Make the logic in clean_file_emails more robust by deleting any
sub-names which consist of common single punctuation marks before
proceeding to the best-effort name extraction logic. The output is then
correct:
devicetree@vger.kernel.org
Some additional comments are added to the function to make things
clearer to future readers.
Link: https://lore.kernel.org/all/0173e76a36b3a9b4e7f324dd3a36fd4a9757f302.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove() functions.
This is also less verbose.
Link: https://lore.kernel.org/linux-pci/cc01721cec2d416d7bdf47086943b17ef44b7286.1702966181.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove() functions.
This is also less verbose.
Link: https://lore.kernel.org/linux-pci/47a30441242c4d5f0e00555cbddd7783350ff1b2.1702966523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove() functions.
This is also less verbose.
Link: https://lore.kernel.org/linux-pci/270f25cdc154f3b0309e57b2f6421776752e2170.1702230593.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.8
A late/optimistic second pull request. The bots have been poking them
since Wednesday without any issues. There are a few fixes in the
ad7091r5 driver as part of rework to enable the ad7091r8 parts that
are included at start of that series.
Includes pre-work for major changes to the DMA buffers that should
land in 6.9 and will greatly improve performance and flexibility for
high performance devices by enabling DMABUF based zero copy transfers
when we don't need to bounce the data via user space.
New device support
------------------
adi,ad7091r8
- Major refactor of existing adi,ad7091r5 driver to separate out useful
shared library code that can be used by I2C and SPI parts.
- Use that library from a new driver supporting the AD7091R-2, AD7091R-4
and AD7091R-8 12-Bit SPI ADCs.
- Series includes some late breaking fixes for the ad7091r5.
microchip,mcp4821
- New driver for MCP4801, MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822
I2C single / dual channel DACs.
Cleanup
-------
buffers:
- Use IIO_SEPARATE in place of some hard-coded 0 values.
dma-buffers:
- Simplify things to not use an outgoing queue given it only ever has
up to two elements and we only need to track which is first.
- Split the iio_dma_buffer_fileio_free() function up to make it easier
to read and enable reuse in a series lining up for 6.9
iio.h
- Drop some stale documentation of struct fields that don't exist.
* tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: linux/iio.h: fix Excess kernel-doc description warning
MAINTAINERS: Add MAINTAINERS entry for AD7091R
iio: adc: Add support for AD7091R-8
dt-bindings: iio: Add AD7091R-8
iio: adc: Split AD7091R-5 config symbol
iio: adc: ad7091r: Add chip_info callback to get conversion result channel
iio: adc: ad7091r: Set device mode through chip_info callback
iio: adc: ad7091r: Remove unneeded probe parameters
iio: adc: ad7091r: Move chip init data to container struct
iio: adc: ad7091r: Move generic AD7091R code to base driver and header file
iio: adc: ad7091r: Enable internal vref if external vref is not supplied
iio: adc: ad7091r: Allow users to configure device events
iio: dac: driver for MCP4821
dt-bindings: iio: dac: add MCP4821
iio: buffer-dma: split iio_dma_buffer_fileio_free() function
iio: buffer-dma: Get rid of outgoing queue
iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
|
|
Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Split original patch into two independent parts - Linus ]
Link: https://lore.kernel.org/lkml/7c8828aec72e42eeb841ca0ee3397e9a@AcuMS.aculab.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.
Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.
Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Changed 'old' to 'old_cpu' by request from Waiman Long - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
First, we add a new command to query hardware statistics, and then
implement two functions: ib_device_ops.alloc_hw_port_stats and
ib_device_ops.get_hw_stats to allow rdma tool can get the statistics
of erdma device.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227084800.99091-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Hardware response, such as the result of query statistics, may be too
long to be directly accommodated within the CQE structure. To address
this, we introduce a DMA pool to hold the hardware's responses of CMDQ
requests.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227084800.99091-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e74bb7d ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Using shadow GPRs for vectored interrupts has never been used,
time to remove it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Setting up vector interrupts worked only with handlers, which resided
in CKSEG0 space. This limits the kernel placement for 64bit platforms.
By patching in the offset into vi_handlers[] instead of the full
handler address, the vectored exception handler can load the
address by itself and jump to it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
|
|
Pull CS35L41 codec updates for Lenovo laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
serie
Add driver properties on 4 models of this laptop serie since they don't
have _DSD in the ACPI table
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
(2023) serie
Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip
on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are
16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids).
Subsystem ids list:
- 17AA38B4
- 17AA38B5
- 17AA38B6
- 17AA38B7
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114001.19855-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In
https://lore.kernel.org/r/20231206110636.GBZXBVvCWj2IDjVk4c@fat_crate.local
I wanted to adjust the alternative patching debug output to the new
changes introduced by
da0fe6e68e10 ("x86/alternative: Add indirect call patching")
but removed the '*' which denotes the ->x86_capability word. The correct
output should be, for example:
[ 0.230071] SMP alternatives: feat: 11*32+15, old: (entry_SYSCALL_64_after_hwframe+0x5a/0x77 (ffffffff81c000c2) len: 16), repl: (ffffffff89ae896a, len: 5) flags: 0x0
while the incorrect one says "... 1132+15" currently.
Add back the '*'.
Fixes: da0fe6e68e10 ("x86/alternative: Add indirect call patching")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231206110636.GBZXBVvCWj2IDjVk4c@fat_crate.local
|
|
Make the amp available immediately after a module
load to avoid having to wait for a PCM hook action.
(eg. unloading & loading the module while listening
music)
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the driver core can properly handle constant struct bus_type,
move all of the sound subsystem struct bus_type structures as const,
placing them into read-only memory which can not be modified at runtime.
Note, this fixes a duplicate definition of ac97_bus_type, which somehow
was declared extern in a .h file, and then static as a prototype in a .c
file, and then properly later on in the same .c file. Amazing that no
compiler warning ever showed up for this.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Dawei Li <set_pte_at@outlook.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add SBI STA and its two registers to the get-reg-list test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
With the introduction of steal-time accounting support for
RISC-V KVM we can add RISC-V support to the steal_time test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add guest_sbi_probe_extension(), allowing guest code to probe for
SBI extensions. As guest_sbi_probe_extension() needs
SBI_ERR_NOT_SUPPORTED, take the opportunity to bring in all SBI
error codes. We don't bring in all current extension IDs or base
extension function IDs though, even though we need one of each,
because we'd prefer to bring those in as necessary.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
sbi_ecall() isn't ucall specific and its prototype is already in
processor.h. Move its implementation to processor.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a select SCHED_INFO to the KVM config in order to get run_delay
info. Then implement SBI STA's set-steal-time-shmem function and
kvm_riscv_vcpu_record_steal_time() to provide the steal-time info
to guests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM userspace needs to be able to save and restore the steal-time
shared memory address. Provide the address through the get/set-one-reg
interface with two ulong-sized SBI STA extension registers (lo and hi).
64-bit KVM userspace must not set the hi register to anything other
than zero and is allowed to completely neglect saving/restoring it.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Some SBI extensions have state that needs to be saved / restored
when migrating the VM. Provide a get/set-one-reg register type
for SBI extension registers. Each SBI extension that uses this type
will have its own subtype. There are currently no subtypes defined.
The next patch introduces the first one.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM's implementation of SBI STA needs to track the address of each
VCPU's steal-time shared memory region as well as the amount of
stolen time. Add a structure to vcpu_arch to contain this state
and make sure that the address is always set to INVALID_GPA on
vcpu reset. And, of course, ensure KVM won't try to update steal-
time when the shared memory address is invalid.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a new vcpu request to inform a vcpu that it should record its
steal-time information. The request is made each time it has been
detected that the vcpu task was not assigned a cpu for some time,
which is easy to do by making the request from vcpu-load. The record
function is just a stub for now and will be filled in with the rest
of the steal-time support functions in following patches.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
