| Age | Commit message (Collapse) | Author |
|---|
|
Add the required abstractions that will help introducing hierarchical
domain support to the dw-apb-ictl driver.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[maz: commit message, some cleanups]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
Link: https://lore.kernel.org/r/20200924071754.4509-3-thunder.leizhen@huawei.com
|
|
In order to avoid compilation errors when a driver references set_handle_irq(),
but that the architecture doesn't select GENERIC_IRQ_MULTI_HANDLER,
add a stub function that will just WARN_ON_ONCE() if ever used.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200924071754.4509-2-thunder.leizhen@huawei.com
|
|
This causes all the bios to be submitted with REQ_NOWAIT, which can be
problematic on either btrfs or on file systems that otherwise use a mix
of block devices where only some of them support it.
For now, just remove the setting of plug->nowait = true.
Reported-by: Dan Melnic <dmm@fb.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 88b7381a939d ("USB: Select better matching USB drivers when
available") inadvertently broke usbip functionality. The commit in
question allows USB device drivers to be explicitly matched with
USB devices via the use of driver-provided identifier tables and
match functions, which is useful for a specialised device driver
to be chosen for a device that can also be handled by another,
more generic, device driver.
Prior, the USB device section of usb_device_match() had an
unconditional "return 1" statement, which allowed user-space to bind
USB devices to the usbip_host device driver, if desired. However,
the aforementioned commit changed the default/fallback return
value to zero. This breaks device drivers such as usbip_host, so
this commit restores the legacy behaviour, but only if a device
driver does not have an id_table and a match() function.
In addition, if usb_device_match is called for a device driver
and device pair where the device does not match the id_table of the
device driver in question, then the device driver will be disqualified
for the device. This allows avoiding the default case of "return 1",
which prevents undesirable probe() calls to a driver even though
its id_table did not match the device.
Finally, this commit changes the specialised-driver-to-generic-driver
transition code so that when a device driver returns -ENODEV, a more
generic device driver is only considered if the current device driver
does not have an id_table and a match() function. This ensures that
"generic" drivers such as usbip_host will not be considered specialised
device drivers and will not cause the device to be locked in to the
generic device driver, when a more specialised device driver could be
tried.
All of these changes restore usbip functionality without regressions,
ensure that the specialised/generic device driver selection logic works
as expected with the usb and apple-mfi-fastcharge drivers, and do not
negatively affect the use of devices provided by dummy_hcd.
Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available")
Cc: <stable@vger.kernel.org> # 5.8
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <syzkaller@googlegroups.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20200922110703.720960-5-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit resolves a minor bug in the selection/discovery of more
specific USB device drivers for devices that are currently bound to
generic USB device drivers.
The bug is related to the way a candidate USB device driver is
compared against the generic USB device driver. The code in
is_dev_usb_generic_driver() assumes that the device driver in question
is a USB device driver by calling to_usb_device_driver(dev->driver)
to downcast; however I have observed that this assumption is not always
true, through code instrumentation.
This commit avoids the incorrect downcast altogether by comparing
the USB device's driver (i.e., dev->driver) to the generic USB
device driver directly. This method was suggested by Alan Stern.
This bug was found while investigating Andrey Konovalov's report
indicating usbip device driver misbehaviour with the recently merged
generic USB device driver selection feature. The report is linked
below.
Fixes: d5643d2249b2 ("USB: Fix device driver race")
Cc: <stable@vger.kernel.org> # 5.8
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: <syzkaller@googlegroups.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20200922110703.720960-4-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit resolves a bug in the selection/discovery of more
specific USB device drivers for devices that are currently bound to
generic USB device drivers.
The bug is in the logic that determines whether a device currently
bound to a generic USB device driver should be re-probed by a
more specific USB device driver or not. The code in
__usb_bus_reprobe_drivers() used to have the following lines:
if (usb_device_match_id(udev, new_udriver->id_table) == NULL &&
(!new_udriver->match || new_udriver->match(udev) != 0))
return 0;
ret = device_reprobe(dev);
As the reader will notice, the code checks whether the USB device in
consideration matches the identifier table (id_table) of a specific
USB device_driver (new_udriver), followed by a similar check, but this
time with the USB device driver's match function. However, the match
function's return value is not checked correctly. When match() returns
zero, it means that the specific USB device driver is *not* applicable
to the USB device in question, but the code then goes on to reprobe the
device with the new USB device driver under consideration. All this to
say, the logic is inverted.
This bug was found by code inspection and instrumentation while
investigating the root cause of the issue reported by Andrey Konovalov,
where usbip took over syzkaller's virtual USB devices in an undesired
manner. The report is linked below.
Fixes: d5643d2249b2 ("USB: Fix device driver race")
Cc: <stable@vger.kernel.org> # 5.8
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: <syzkaller@googlegroups.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20200922110703.720960-3-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit reverts commit 7a2f2974f265 ("usbip: Implement a match
function to fix usbip").
In summary, commit d5643d2249b2 ("USB: Fix device driver race")
inadvertently broke usbip functionality, which I resolved in an incorrect
manner by introducing a match function to usbip, usbip_match(), that
unconditionally returns true.
However, the usbip_match function, as is, causes usbip to take over
virtual devices used by syzkaller for USB fuzzing, which is a regression
reported by Andrey Konovalov.
Furthermore, in conjunction with the fix of another bug, handled by another
patch titled "usbcore/driver: Fix specific driver selection" in this patch
set, the usbip_match function causes unexpected USB subsystem behaviour
when the usbip_host driver is loaded. The unexpected behaviour can be
qualified as follows:
- If commit 41160802ab8e ("USB: Simplify USB ID table match") is included
in the kernel, then all USB devices are bound to the usbip_host
driver, which appears to the user as if all USB devices were
disconnected.
- If the same commit (41160802ab8e) is not in the kernel (as is the case
with v5.8.10) then all USB devices are re-probed and re-bound to their
original device drivers, which appears to the user as a disconnection
and re-connection of USB devices.
Please note that this commit will make usbip non-operational again,
until yet another patch in this patch set is merged, titled
"usbcore/driver: Accommodate usbip".
Cc: <stable@vger.kernel.org> # 5.8: 41160802ab8e: USB: Simplify USB ID table match
Cc: <stable@vger.kernel.org> # 5.8
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <syzkaller@googlegroups.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20200922110703.720960-2-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to move the closing of the src_device out of all the device
replace locking, but we definitely want to zero out the superblock
before we commit the last time to make sure the device is properly
removed. Handle this by pushing btrfs_scratch_superblocks into
btrfs_dev_replace_finishing, and then later on we'll move the src_device
closing and freeing stuff where we need it to be.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During ice_vsi_setup, if ice_cfg_vsi_lan fails, it does not properly
release memory associated with the VSI rings. If we had used devres
allocations for the rings, this would be ok. However, we use kzalloc and
kfree_rcu for these ring structures.
Using the correct label to cleanup the rings during ice_vsi_setup
highlights an issue in the ice_vsi_clear_rings function: it can leave
behind stale ring pointers in the q_vectors structure.
When releasing rings, we must also ensure that no q_vector associated
with the VSI will point to this ring again. To resolve this, loop over
all q_vectors and release their ring mapping. Because we are about to
free all rings, no q_vector should remain pointing to any of the rings
in this VSI.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_setup_pf_sw function can cause a memory leak if register_netdev
fails, due to accidentally failing to free the VSI rings. Fix the memory
leak by using ice_vsi_release, ensuring we actually go through the full
teardown process.
This should be safe even if the netdevice is not registered because we
will have set the netdev pointer to NULL, ensuring ice_vsi_release won't
call unregister_netdev.
An alternative fix would be moving management of the PF VSI netdev into
the main VSI setup code. This is complicated and likely requires
significant refactor in how we manage VSIs
Fixes: 3a858ba392c3 ("ice: Add support for VSI allocation and deallocation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It appears that the ice_suspend flow is missing a call to pci_save_state
and this is triggering the message "State of device not saved by
ice_suspend" and a call trace. Fix it.
Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When calling iavf_resume there was a crash because wrong
function was used to get iavf_adapter and net_device pointers.
Changed how iavf_resume is getting iavf_adapter and net_device
pointers from pci_dev.
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for 5.9-rc7 from Chanwoo Choi:
"1. Update devfreq core
- Add missing timer type to devfreq_summary debugfs node.
2. Fix devfreq device driver
- Fix the exception handling about clock on tegra30-devfreq.c"
* tag 'devfreq-fixes-for-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Disable clock on error in probe
PM / devfreq: Add timer type to devfreq_summary debugfs
|
|
commit 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") removed the
REQ_NOWAIT_INLINE related code, but the diff wasn't applied to
blk_types.h somehow.
Then commit 2771cefeac49 ("block: remove the REQ_NOWAIT_INLINE flag")
removed the REQ_NOWAIT_INLINE flag while the BLK_QC_T_EAGAIN flag still
remains.
Fixes: 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we cancel these requests, we'll leak the memory associated with the
filename. Add them to the table of ops that need cleaning, if
REQ_F_NEED_CLEANUP is set.
Cc: stable@vger.kernel.org
Fixes: e62753e4e292 ("io_uring: call statx directly")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff855 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4ea4 ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Based on Google-internal RSEQ work done by Paul Turner and Andrew
Hunter.
This patch adds a selftest for MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ.
The test quite often fails without the previous patch in this
patchset, but consistently passes with it.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/20200923233618.2572849-3-posk@google.com
|
|
This patch adds rseq_offset_deref_addv() function to
tools/testing/selftests/rseq/rseq-x86.h, to be used in a selftest in
the next patch in the patchset.
Once an architecture adds support for this function they should define
"RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV".
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/20200923233618.2572849-2-posk@google.com
|
|
This patchset is based on Google-internal RSEQ work done by Paul
Turner and Andrew Hunter.
When working with per-CPU RSEQ-based memory allocations, it is
sometimes important to make sure that a global memory location is no
longer accessed from RSEQ critical sections. For example, there can be
two per-CPU lists, one is "active" and accessed per-CPU, while another
one is inactive and worked on asynchronously "off CPU" (e.g. garbage
collection is performed). Then at some point the two lists are
swapped, and a fast RCU-like mechanism is required to make sure that
the previously active list is no longer accessed.
This patch introduces such a mechanism: in short, membarrier() syscall
issues an IPI to a CPU, restarting a potentially active RSEQ critical
section on the CPU.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/20200923233618.2572849-1-posk@google.com
|
|
Barry Song noted the following
Something is wrong. In find_busiest_group(), we are checking if
src has higher load, however, in task_numa_find_cpu(), we are
checking if dst will have higher load after balancing. It seems
it is not sensible to check src.
It maybe cause wrong imbalance value, for example,
if dst_running = env->dst_stats.nr_running + 1 results in 3 or
above, and src_running = env->src_stats.nr_running - 1 results
in 1;
The current code is thinking imbalance as 0 since src_running is
smaller than 2. This is inconsistent with load balancer.
Basically, in find_busiest_group(), the NUMA imbalance is ignored if moving
a task "from an almost idle domain" to a "domain with spare capacity". This
patch forbids movement "from a misplaced domain" to "an almost idle domain"
as that is closer to what the CPU load balancer expects.
This patch is not a universal win. The old behaviour was intended to allow
a task from an almost idle NUMA node to migrate to its preferred node if
the destination had capacity but there are corner cases. For example,
a NAS compute load could be parallelised to use 1/3rd of available CPUs
but not all those potential tasks are active at all times allowing this
logic to trigger. An obvious example is specjbb 2005 running various
numbers of warehouses on a 2 socket box with 80 cpus.
specjbb
5.9.0-rc4 5.9.0-rc4
vanilla dstbalance-v1r1
Hmean tput-1 46425.00 ( 0.00%) 43394.00 * -6.53%*
Hmean tput-2 98416.00 ( 0.00%) 96031.00 * -2.42%*
Hmean tput-3 150184.00 ( 0.00%) 148783.00 * -0.93%*
Hmean tput-4 200683.00 ( 0.00%) 197906.00 * -1.38%*
Hmean tput-5 236305.00 ( 0.00%) 245549.00 * 3.91%*
Hmean tput-6 281559.00 ( 0.00%) 285692.00 * 1.47%*
Hmean tput-7 338558.00 ( 0.00%) 334467.00 * -1.21%*
Hmean tput-8 340745.00 ( 0.00%) 372501.00 * 9.32%*
Hmean tput-9 424343.00 ( 0.00%) 413006.00 * -2.67%*
Hmean tput-10 421854.00 ( 0.00%) 434261.00 * 2.94%*
Hmean tput-11 493256.00 ( 0.00%) 485330.00 * -1.61%*
Hmean tput-12 549573.00 ( 0.00%) 529959.00 * -3.57%*
Hmean tput-13 593183.00 ( 0.00%) 555010.00 * -6.44%*
Hmean tput-14 588252.00 ( 0.00%) 599166.00 * 1.86%*
Hmean tput-15 623065.00 ( 0.00%) 642713.00 * 3.15%*
Hmean tput-16 703924.00 ( 0.00%) 660758.00 * -6.13%*
Hmean tput-17 666023.00 ( 0.00%) 697675.00 * 4.75%*
Hmean tput-18 761502.00 ( 0.00%) 758360.00 * -0.41%*
Hmean tput-19 796088.00 ( 0.00%) 798368.00 * 0.29%*
Hmean tput-20 733564.00 ( 0.00%) 823086.00 * 12.20%*
Hmean tput-21 840980.00 ( 0.00%) 856711.00 * 1.87%*
Hmean tput-22 804285.00 ( 0.00%) 872238.00 * 8.45%*
Hmean tput-23 795208.00 ( 0.00%) 889374.00 * 11.84%*
Hmean tput-24 848619.00 ( 0.00%) 966783.00 * 13.92%*
Hmean tput-25 750848.00 ( 0.00%) 903790.00 * 20.37%*
Hmean tput-26 780523.00 ( 0.00%) 962254.00 * 23.28%*
Hmean tput-27 1042245.00 ( 0.00%) 991544.00 * -4.86%*
Hmean tput-28 1090580.00 ( 0.00%) 1035926.00 * -5.01%*
Hmean tput-29 999483.00 ( 0.00%) 1082948.00 * 8.35%*
Hmean tput-30 1098663.00 ( 0.00%) 1113427.00 * 1.34%*
Hmean tput-31 1125671.00 ( 0.00%) 1134175.00 * 0.76%*
Hmean tput-32 968167.00 ( 0.00%) 1250286.00 * 29.14%*
Hmean tput-33 1077676.00 ( 0.00%) 1060893.00 * -1.56%*
Hmean tput-34 1090538.00 ( 0.00%) 1090933.00 * 0.04%*
Hmean tput-35 967058.00 ( 0.00%) 1107421.00 * 14.51%*
Hmean tput-36 1051745.00 ( 0.00%) 1210663.00 * 15.11%*
Hmean tput-37 1019465.00 ( 0.00%) 1351446.00 * 32.56%*
Hmean tput-38 1083102.00 ( 0.00%) 1064541.00 * -1.71%*
Hmean tput-39 1232990.00 ( 0.00%) 1303623.00 * 5.73%*
Hmean tput-40 1175542.00 ( 0.00%) 1340943.00 * 14.07%*
Hmean tput-41 1127826.00 ( 0.00%) 1339492.00 * 18.77%*
Hmean tput-42 1198313.00 ( 0.00%) 1411023.00 * 17.75%*
Hmean tput-43 1163733.00 ( 0.00%) 1228253.00 * 5.54%*
Hmean tput-44 1305562.00 ( 0.00%) 1357886.00 * 4.01%*
Hmean tput-45 1326752.00 ( 0.00%) 1406061.00 * 5.98%*
Hmean tput-46 1339424.00 ( 0.00%) 1418451.00 * 5.90%*
Hmean tput-47 1415057.00 ( 0.00%) 1381570.00 * -2.37%*
Hmean tput-48 1392003.00 ( 0.00%) 1421167.00 * 2.10%*
Hmean tput-49 1408374.00 ( 0.00%) 1418659.00 * 0.73%*
Hmean tput-50 1359822.00 ( 0.00%) 1391070.00 * 2.30%*
Hmean tput-51 1414246.00 ( 0.00%) 1392679.00 * -1.52%*
Hmean tput-52 1432352.00 ( 0.00%) 1354020.00 * -5.47%*
Hmean tput-53 1387563.00 ( 0.00%) 1409563.00 * 1.59%*
Hmean tput-54 1406420.00 ( 0.00%) 1388711.00 * -1.26%*
Hmean tput-55 1438804.00 ( 0.00%) 1387472.00 * -3.57%*
Hmean tput-56 1399465.00 ( 0.00%) 1400296.00 * 0.06%*
Hmean tput-57 1428132.00 ( 0.00%) 1396399.00 * -2.22%*
Hmean tput-58 1432385.00 ( 0.00%) 1386253.00 * -3.22%*
Hmean tput-59 1421612.00 ( 0.00%) 1371416.00 * -3.53%*
Hmean tput-60 1429423.00 ( 0.00%) 1389412.00 * -2.80%*
Hmean tput-61 1396230.00 ( 0.00%) 1351122.00 * -3.23%*
Hmean tput-62 1418396.00 ( 0.00%) 1383098.00 * -2.49%*
Hmean tput-63 1409918.00 ( 0.00%) 1374662.00 * -2.50%*
Hmean tput-64 1410236.00 ( 0.00%) 1376216.00 * -2.41%*
Hmean tput-65 1396405.00 ( 0.00%) 1364418.00 * -2.29%*
Hmean tput-66 1395975.00 ( 0.00%) 1357326.00 * -2.77%*
Hmean tput-67 1392986.00 ( 0.00%) 1349642.00 * -3.11%*
Hmean tput-68 1386541.00 ( 0.00%) 1343261.00 * -3.12%*
Hmean tput-69 1374407.00 ( 0.00%) 1342588.00 * -2.32%*
Hmean tput-70 1377513.00 ( 0.00%) 1334654.00 * -3.11%*
Hmean tput-71 1369319.00 ( 0.00%) 1334952.00 * -2.51%*
Hmean tput-72 1354635.00 ( 0.00%) 1329005.00 * -1.89%*
Hmean tput-73 1350933.00 ( 0.00%) 1318942.00 * -2.37%*
Hmean tput-74 1351714.00 ( 0.00%) 1316347.00 * -2.62%*
Hmean tput-75 1352198.00 ( 0.00%) 1309974.00 * -3.12%*
Hmean tput-76 1349490.00 ( 0.00%) 1286064.00 * -4.70%*
Hmean tput-77 1336131.00 ( 0.00%) 1303684.00 * -2.43%*
Hmean tput-78 1308896.00 ( 0.00%) 1271024.00 * -2.89%*
Hmean tput-79 1326703.00 ( 0.00%) 1290862.00 * -2.70%*
Hmean tput-80 1336199.00 ( 0.00%) 1291629.00 * -3.34%*
The performance at the mid-point is better but not universally better. The
patch is a mixed bag depending on the workload, machine and overall
levels of utilisation. Sometimes it's better (sometimes much better),
other times it is worse (sometimes much worse). Given that there isn't a
universally good decision in this section and more people seem to prefer
the patch then it may be best to keep the LB decisions consistent and
revisit imbalance handling when the load balancer code changes settle down.
Jirka Hladky added the following observation.
Our results are mostly in line with what you see. We observe
big gains (20-50%) when the system is loaded to 1/3 of the
maximum capacity and mixed results at the full load - some
workloads benefit from the patch at the full load, others not,
but performance changes at the full load are mostly within the
noise of results (+/-5%). Overall, we think this patch is helpful.
[mgorman@techsingularity.net: Rewrote changelog]
Fixes: fb86f5b211 ("sched/numa: Use similar logic to the load balancer for moving between domains with spare capacity")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200921221849.GI3179@techsingularity.net
|
|
The busy_factor, which increases load balance interval when a cpu is busy,
is set to 32 by default. This value generates some huge LB interval on
large system like the THX2 made of 2 node x 28 cores x 4 threads.
For such system, the interval increases from 112ms to 3584ms at MC level.
And from 228ms to 7168ms at NUMA level.
Even on smaller system, a lower busy factor has shown improvement on the
fair distribution of the running time so let reduce it for all.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-5-vincent.guittot@linaro.org
|
|
sched domains tend to trigger simultaneously the load balance loop but
the larger domains often need more time to collect statistics. This
slowness makes the larger domain trying to detach tasks from a rq whereas
tasks already migrated somewhere else at a sub-domain level. This is not
a real problem for idle LB because the period of smaller domains will
increase with its CPUs being busy and this will let time for higher ones
to pulled tasks. But this becomes a problem when all CPUs are already busy
because all domains stay synced when they trigger their LB.
A simple way to minimize simultaneous LB of all domains is to decrement the
the busy interval by 1 jiffies. Because of the busy_factor, the interval of
larger domain will not be a multiple of smaller ones anymore.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-4-vincent.guittot@linaro.org
|
|
The 25% default imbalance threshold for DIE and NUMA domain is large
enough to generate significant unfairness between threads. A typical
example is the case of 11 threads running on 2x4 CPUs. The imbalance of
20% between the 2 groups of 4 cores is just low enough to not trigger
the load balance between the 2 groups. We will have always the same 6
threads on one group of 4 CPUs and the other 5 threads on the other
group of CPUS. With a fair time sharing in each group, we ends up with
+20% running time for the group of 5 threads.
Consider decreasing the imbalance threshold for overloaded case where we
use the load to balance task and to ensure fair time sharing.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Hillf Danton <hdanton@sina.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-3-vincent.guittot@linaro.org
|
|
Some UCs like 9 always running tasks on 8 CPUs can't be balanced and the
load balancer currently migrates the waiting task between the CPUs in an
almost random manner. The success of a rq pulling a task depends of the
value of nr_balance_failed of its domains and its ability to be faster
than others to detach it. This behavior results in an unfair distribution
of the running time between tasks because some CPUs will run most of the
time, if not always, the same task whereas others will share their time
between several tasks.
Instead of using nr_balance_failed as a boolean to relax the condition
for detaching task, the LB will use nr_balanced_failed to relax the
threshold between the tasks'load and the imbalance. This mecanism
prevents the same rq or domain to always win the load balance fight.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200921072424.14813-2-vincent.guittot@linaro.org
|
|
In the file fair.c, sometims update_tg_load_avg(cfs_rq, 0) is used,
sometimes update_tg_load_avg(cfs_rq, false) is used.
update_tg_load_avg() has the parameter force, but in current code,
it never set 1 or true to it, so remove the force parameter.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200924014755.36253-1-tian.xianting@h3c.com
|
|
We've met problems that occasionally tasks with full cpumask
(e.g. by putting it into a cpuset or setting to full affinity)
were migrated to our isolated cpus in production environment.
After some analysis, we found that it is due to the current
select_idle_smt() not considering the sched_domain mask.
Steps to reproduce on my 31-CPU hyperthreads machine:
1. with boot parameter: "isolcpus=domain,2-31"
(thread lists: 0,16 and 1,17)
2. cgcreate -g cpu:test; cgexec -g cpu:test "test_threads"
3. some threads will be migrated to the isolated cpu16~17.
Fix it by checking the valid domain mask in select_idle_smt().
Fixes: 10e2f1acd010 ("sched/core: Rewrite and improve select_idle_siblings())
Reported-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1600930127-76857-1-git-send-email-xlpang@linux.alibaba.com
|
|
There is no caller in tree, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20200922132410.48440-1-yuehaibing@huawei.com
|
|
The RT_RUNTIME_SHARE sched feature enables the sharing of rt_runtime
between CPUs, allowing a CPU to run a real-time task up to 100% of the
time while leaving more space for non-real-time tasks to run on the CPU
that lend rt_runtime.
The problem is that a CPU can easily borrow enough rt_runtime to allow
a spinning rt-task to run forever, starving per-cpu tasks like kworkers,
which are non-real-time by design.
This patch disables RT_RUNTIME_SHARE by default, avoiding this problem.
The feature will still be present for users that want to enable it,
though.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Wei Wang <wvw@google.com>
Link: https://lkml.kernel.org/r/b776ab46817e3db5d8ef79175fa0d71073c051c7.1600697903.git.bristot@redhat.com
|
|
When a boosted task gets throttled, what normally happens is that it's
immediately enqueued again with ENQUEUE_REPLENISH, which replenishes the
runtime and clears the dl_throttled flag. There is a special case however:
if the throttling happened on sched-out and the task has been deboosted in
the meantime, the replenish is skipped as the task will return to its
normal scheduling class. This leaves the task with the dl_throttled flag
set.
Now if the task gets boosted up to the deadline scheduling class again
while it is sleeping, it's still in the throttled state. The normal wakeup
however will enqueue the task with ENQUEUE_REPLENISH not set, so we don't
actually place it on the rq. Thus we end up with a task that is runnable,
but not actually on the rq and neither a immediate replenishment happens,
nor is the replenishment timer set up, so the task is stuck in
forever-throttled limbo.
Clear the dl_throttled flag before dropping back to the normal scheduling
class to fix this issue.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200831110719.2126930-1-l.stach@pengutronix.de
|
|
Use runnable_avg to classify numa node state similarly to what is done for
normal load balancer. This helps to ensure that numa and normal balancers
use the same view of the state of the system.
Large arm64system: 2 nodes / 224 CPUs:
hackbench -l (256000/#grp) -g #grp
grp tip/sched/core +patchset improvement
1 14,008(+/- 4,99 %) 13,800(+/- 3.88 %) 1,48 %
4 4,340(+/- 5.35 %) 4.283(+/- 4.85 %) 1,33 %
16 3,357(+/- 0.55 %) 3.359(+/- 0.54 %) -0,06 %
32 3,050(+/- 0.94 %) 3.039(+/- 1,06 %) 0,38 %
64 2.968(+/- 1,85 %) 3.006(+/- 2.92 %) -1.27 %
128 3,290(+/-12.61 %) 3,108(+/- 5.97 %) 5.51 %
256 3.235(+/- 3.95 %) 3,188(+/- 2.83 %) 1.45 %
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20200921072959.16317-1-vincent.guittot@linaro.org
|
|
fbcon_get_font() is reading out-of-bounds. A malicious user may resize
`vc->vc_font.height` to a large value, causing fbcon_get_font() to
read out of `fontdata`.
fbcon_get_font() handles both built-in and user-provided fonts.
Fortunately, recently we have added FONT_EXTRA_WORDS support for built-in
fonts, so fix it by adding range checks using FNTSIZE().
This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h", and patch "Fonts: Support FONT_EXTRA_WORDS
macros for built-in fonts".
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+29d4ed7f3bdedf2aa2fd@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b34544687a1a09d6de630659eb7a773f4953238b.1600953813.git.yepeilin.cs@gmail.com
|
|
syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.
In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.
For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:
Recently we have gathered all the above macros to <linux/font.h>. Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.
This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
|
|
drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros
from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all
definitions into <linux/font.h>.
Since newport_con now uses four extra words, initialize the fourth word in
newport_set_font() properly.
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com
|
|
The struct flowi must never be interpreted by itself as its size
depends on the address family. Therefore it must always be grouped
with its original family value.
In this particular instance, the original family value is lost in
the function xfrm_state_find. Therefore we get a bogus read when
it's coupled with the wrong family which would occur with inter-
family xfrm states.
This patch fixes it by keeping the original family value.
Note that the same bug could potentially occur in LSM through
the xfrm_state_pol_flow_match hook. I checked the current code
there and it seems to be safe for now as only secid is used which
is part of struct flowi_common. But that API should be changed
so that so that we don't get new bugs in the future. We could
do that by replacing fl with just secid or adding a family field.
Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com
Fixes: 48b8d78315bf ("[XFRM]: State selection update to use inner...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Currently, we use length of DSACKed range to compute number of
delivered packets. And if sequence range in DSACK is corrupted,
we can get bogus dsacked/acked count, and bogus cwnd.
This patch put bounds on DSACKed range to skip update of data
delivery and spurious retransmission information, if the DSACK
is unlikely caused by sender's action:
- DSACKed range shouldn't be greater than maximum advertised rwnd.
- Total no. of DSACKed segments shouldn't be greater than total
no. of retransmitted segs. Unlike spurious retransmits, network
duplicates or corrupted DSACKs shouldn't be counted as delivery.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MDIO reads can happen during PHY probing, and printing an error with
dev_err can result in a large number of error messages during device
probe. On a platform with a serial console this can result in
excessively long boot times in a way that looks like an infinite loop
when multiple busses are present. Since 0f183fd151c (net/fsl: enable
extended scanning in xgmac_mdio) we perform more scanning so there are
potentially more failures.
Reduce the logging level to dev_dbg which is consistent with the
Freescale enetc driver.
Cc: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous implementation failed to account for the "ports" node. The
actual port nodes are not child nodes of the switch node, but a "ports"
node sits in between.
Fixes: edecfa98f602 ("net: dsa: microchip: look for phy-mode in port nodes")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BUG: kernel NULL pointer dereference, address: 00000000000000b8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S
5.9.0-rc3+ #1
Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018
Workqueue: events tx_work_handler [tls]
RIP: 0010:tx_work_handler+0x1b/0x70 [tls]
Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b
6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83
e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00
RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122
RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200
RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665
R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700
R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38
FS: 0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
process_one_work+0x1a7/0x370
worker_thread+0x30/0x370
? process_one_work+0x370/0x370
kthread+0x114/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
tls_sw_release_resources_tx() waits for encrypt_pending, which
can have race, so we need similar changes as in commit
0cada33241d9de205522e3858b18e506ca5cce2c here as well.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify the comment typo: "compliment" -> "complement".
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3.
This register is used by stream gate control of PSFP, and it has not
been used before, because PSFP is not implemented in ocelot driver.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
state->speed holds a value of 10, 100, 1000 or 2500, but
QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the
speed to a proper value.
Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It should also be regarded as an error when hw return status=4 for PF's
setting mac cmd. Only if PF return status=4 to VF should this cmd be
taken special treatment.
Fixes: 7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1.
Move the lapb_register/lapb_unregister calls into the ndo_open/ndo_stop
functions.
This makes the LAPB protocol start/stop when the network interface
starts/stops. When the network interface is down, the LAPB protocol
shouldn't be running and the LAPB module shoudn't be generating control
frames.
2.
Move netif_start_queue/netif_stop_queue into the ndo_open/ndo_stop
functions.
This makes the TX queue start/stop when the network interface
starts/stops.
(netif_stop_queue was originally in the ndo_stop function. But to make
the code look better, I created a new function to use as ndo_stop, and
made it call the original ndo_stop function. I moved netif_stop_queue
from the original ndo_stop function to the new ndo_stop function.)
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding
because they could be easily forged and can lead to unwanted
fragmentation by the router.
You only need to enable this if you have user-space software
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled
Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).
Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...
It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.
Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).
This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.
I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com>
Cc: Vinay Paradkar <vparadka@qti.qualcomm.com>
Cc: Tyler Wear <twear@quicinc.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cong Wang says:
====================
net_sched: fix a UAF in tcf_action_init()
This patchset fixes a use-after-free triggered by syzbot. Please
find more details in each patch description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot is able to trigger a failure case inside the loop in
tcf_action_init(), and when this happens we clean up with
tcf_action_destroy(). But, as these actions are already inserted
into the global IDR, other parallel process could free them
before tcf_action_destroy(), then we will trigger a use-after-free.
Fix this by deferring the insertions even later, after the loop,
and committing all the insertions in a separate loop, so we will
never fail in the middle of the insertions any more.
One side effect is that the window between alloction and final
insertion becomes larger, now it is more likely that the loop in
tcf_del_walker() sees the placeholder -EBUSY pointer. So we have
to check for error pointer in tcf_del_walker().
Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All TC actions call tcf_idr_insert() for new action at the end
of their ->init(), so we can actually move it to a central place
in tcf_action_init_1().
And once the action is inserted into the global IDR, other parallel
process could free it immediately as its refcnt is still 1, so we can
not fail after this, we need to move it after the goto action
validation to avoid handling the failure case after insertion.
This is found during code review, is not directly triggered by syzbot.
And this prepares for the next patch.
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9:
- Single null pointer deref fix for dma-buf.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4106c21e-f52c-4c05-6cdb-daa743bb8617@linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc7:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
- Backmerge from Linus' master to fix build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh5fpmha.fsf@intel.com
|
|
The dax mess had some fallout, and i915 used a later base to fix their CI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
