| Age | Commit message (Collapse) | Author |
|---|
|
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
commit 1b870fa5573e ("kvm: stats: tell userspace which values are
boolean") added a new stat unit (boolean) but failed to raise
KVM_STATS_UNIT_MAX.
Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN.
Fixes: 1b870fa5573e ("kvm: stats: tell userspace which values are boolean")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220719125229.2934273-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Taehee Yoo says:
====================
amt: fix validation and synchronization bugs
There are some synchronization issues in the amt module.
Especially, an amt gateway doesn't well synchronize its own variables
and status(amt->status).
It tries to use a workqueue for handles in a single thread.
A global lock is also good, but it would occur complex locking complex.
In this patchset, only the gateway uses workqueue.
The reason why only gateway interface uses workqueue is that gateway
should manage its own states and variables a little bit statefully.
But relay doesn't need to manage tunnels statefully, stateless is okay.
So, relay side message handlers are okay to be called concurrently.
But it doesn't mean that no lock is needed.
Only amt multicast data message type will not be processed by the work
queue because It contains actual multicast data.
So, it should be processed immediately.
When any amt gateway events are triggered(sending discovery message by
delayed_work, sending request message by delayed_work and receiving
messages), it stores event and skb into the event queue(amt->events[16]).
Then, workqueue processes these events one by one.
The first patch is to use the work queue.
The second patch is to remove unnecessary lock due to a previous patch.
The third patch is to use READ_ONCE() in the amt module.
Even if the amt module uses a single thread, some variables (ready4,
ready6, amt->status) can be accessed concurrently.
The fourth patch is to add missing nonce generation logic when it sends a
new request message.
The fifth patch is to drop unexpected advertisement messages.
advertisement message should be received only after the gateway sends
a discovery message first.
So, the gateway should drop advertisement messages if it has never
sent a discovery message and it also should drop duplicate advertisement
messages.
Using nonce is good to distinguish whether a received message is an
expected message or not.
The sixth patch is to drop unexpected query messages.
This is the same behavior as the fourth patch.
Query messages should be received only after the gateway sends a request
message first.
The nonce variable is used to distinguish whether it is a reply to a
previous request message or not.
amt->ready4 and amt->ready6 are used to distinguish duplicate messages.
The seventh patch is to drop unexpected multicast data.
AMT gateway should not receive multicast data message type before
establish between gateway and relay.
In order to drop unexpected multicast data messages, it checks amt->status.
The last patch is to fix a locking problem on the relay side.
amt->nr_tunnels variable is protected by amt->lock.
But amt_request_handler() doesn't protect this variable.
v2:
- Use local_bh_disable() instead of rcu_read_lock_bh() in
amt_membership_query_handler.
- Fix using uninitialized variables.
- Fix unexpectedly start the event_wq after stopping.
- Fix possible deadlock in amt_event_work().
- Add a limit variable in amt_event_work() to prevent infinite working.
- Rename amt_queue_events() to amt_queue_event().
====================
Link: https://lore.kernel.org/r/20220717160910.19156-1-ap420073@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AMT gateway interface should not receive unexpected advertisement messages.
In order to drop these packets, it should check nonce and amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When AMT gateway starts sending a new request message, it should
regenerate the nonce variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are some data races in the amt module.
amt->ready4, amt->ready6, and amt->status can be accessed concurrently
without locks.
So, it uses READ_ONCE() and WRITE_ONCE().
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By the previous patch, amt gateway handlers are changed to worked by
a single thread.
So, most locks for gateway are not needed.
So, it removes.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are some synchronization issues(amt->status, amt->req_cnt, etc)
if the interface is in gateway mode because gateway message handlers
are processed concurrently.
This applies a work queue for processing these messages instead of
expanding the locking context.
So, the purposes of this patch are to fix exist race conditions and to make
gateway to be able to validate a gateway status more correctly.
When the AMT gateway interface is created, it tries to establish to relay.
The establishment step looks stateless, but it should be managed well.
In order to handle messages in the gateway, it saves the current
status(i.e. AMT_STATUS_XXX).
This patch makes gateway code to be worked with a single thread.
Now, all messages except the multicast are triggered(received or
delay expired), and these messages will be stored in the event
queue(amt->events).
Then, the single worker processes stored messages asynchronously one
by one.
The multicast data message type will be still processed immediately.
Now, amt->lock is only needed to access the event queue(amt->events)
if an interface is the gateway mode.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add spi_device_id entries to silent SPI warnings.
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add spi_device_id entries to silent following warnings:
SPI driver sja1105 has no spi_device_id for nxp,sja1105e
SPI driver sja1105 has no spi_device_id for nxp,sja1105t
SPI driver sja1105 has no spi_device_id for nxp,sja1105p
SPI driver sja1105 has no spi_device_id for nxp,sja1105q
SPI driver sja1105 has no spi_device_id for nxp,sja1105r
SPI driver sja1105 has no spi_device_id for nxp,sja1105s
SPI driver sja1105 has no spi_device_id for nxp,sja1110a
SPI driver sja1105 has no spi_device_id for nxp,sja1110b
SPI driver sja1105 has no spi_device_id for nxp,sja1110c
SPI driver sja1105 has no spi_device_id for nxp,sja1110d
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once.
Fixes: e36edd9d26cf ("be2net: add ethtool "-m" option support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For regcache_sync_region, we need to use pca953x_recalc_addr() to get
the real register address.
Fixes: ec82d1eba346 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.
Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba346 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
For the device use NO AI mode(not support auto address increment),
only use the single read/write when config the regmap.
We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device
do not support AI mode, but when do the regmap sync, regmap will
sync 3 byte data to register 1, logically this means write first
data to register 1, write second data to register 2, write third data
to register 3. But this device do not support AI mode, finally, these
three data write only into register 1 one by one. the reault is the
value of register 1 alway equal to the latest data, here is the third
data, no operation happened on register 2 and register 3. This is
not what we expect.
Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The register address used for the clock gate register is the base
register address coming from first reg map (ie. the generic
clock registers) instead of the second reg map defining the clock
gate register.
Use the correct clock gate register address.
Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Disable is done in stmmac_init_eee() on the event of MAC link down.
Since setting enable/disable EEE via ethtool will eventually trigger
a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid
calling xpcs_config_eee() twice.
Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Fix 2 DSA issues with vlan_filtering_is_global
This patch set fixes 2 issues with vlan_filtering_is_global switches.
Both are regressions introduced by refactoring commit d0004a020bb5
("net: dsa: remove the "dsa_to_port in a loop" antipattern from the
core"), which wasn't tested on a wide enough variety of switches.
Tested on the sja1105 driver.
====================
Link: https://lore.kernel.org/r/20220715151659.780544-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "ds" iterator variable used in dsa_port_reset_vlan_filtering() ->
dsa_switch_for_each_port() overwrites the "dp" received as argument,
which is later used to call dsa_port_vlan_filtering() proper.
As a result, switches which do enter that code path (the ones with
vlan_filtering_is_global=true) will dereference an invalid dp in
dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge.
Use a dedicated "other_dp" iterator variable to avoid this from
happening.
Fixes: d0004a020bb5 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed refactoring commit changed a "port" iterator with "other_dp",
but still looked at the slave_dev of the dp outside the loop, instead of
other_dp->slave from the loop.
As a result, dsa_port_vlan_filtering() would not call
dsa_slave_manage_vlan_filtering() except for the port in cause, and not
for all switch ports as expected.
Fixes: d0004a020bb5 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core")
Reported-by: Lucian Banu <Lucian.Banu@westermo.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible to disable VFs while the PF driver is processing requests
from the VF driver. This can result in a panic.
BUG: unable to handle kernel paging request at 000000000000106c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- -
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe]
Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff
01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c
00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a
RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002
RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006
RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780
R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020
R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80
FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? ttwu_do_wakeup+0x19/0x140
? try_to_wake_up+0x1cd/0x550
? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf]
ixgbe_msix_other+0x17e/0x310 [ixgbe]
__handle_irq_event_percpu+0x40/0x180
handle_irq_event_percpu+0x30/0x80
handle_irq_event+0x36/0x53
handle_edge_irq+0x82/0x190
handle_irq+0x1c/0x30
do_IRQ+0x49/0xd0
common_interrupt+0xf/0xf
This can be eventually be reproduced with the following script:
while :
do
echo 63 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
echo 0 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
done
Add lock when disabling SR-IOV to prevent process VF mailbox communication.
Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned")
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix an issue when driver incorrectly detects state
of recovery process and erroneously reinitializes interrupts,
which results in a kernel error and call trace message.
The issue was caused by a combination of two factors:
1. Assuming the EMP reset issued after completing
firmware recovery means the whole recovery process is complete.
2. Erroneous reinitialization of interrupt vector after detecting
the above mentioned EMP reset.
Fixes (1) by changing how recovery state change is detected
and (2) by adjusting the conditional expression to ensure using proper
interrupt reinitialization method, depending on the situation.
Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here
struct mtk_wed_ring *ring = &dev->tx_ring[idx];
The bounds of idx are checked here
BUG_ON(idx > ARRAY_SIZE(dev->tx_ring));
If idx is the size of the array, it will pass this check and overflow.
So change the check to >= .
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Horatiu Vultur says:
====================
net: lan966x: Fix issues with MAC table
The patch series fixes 2 issues:
- when an entry was forgotten the irq thread was holding a spin lock and then
was talking also rtnl_lock.
- the access to the HW MAC table is indirect, so the access to the HW MAC
table was not synchronized, which means that there could be race conditions.
====================
Link: https://lore.kernel.org/r/20220714194040.231651-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the SW bridge was trying to add/remove entries to/from HW, the
access to HW was not protected by any lock. In this way, it was
possible to have race conditions.
Fix this by using the lan966x->mac_lock to protect parallel access to HW
for this cases.
Fixes: 25ee9561ec622 ("net: lan966x: More MAC table functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The problem with this spin lock is that it was just protecting the list
of the MAC entries in SW and not also the access to the MAC entries in HW.
Because the access to HW is indirect, then it could happen to have race
conditions.
For example when SW introduced an entry in MAC table and the irq mac is
trying to read something from the MAC.
Update such that also the access to MAC entries in HW is protected by
this lock.
Fixes: 5ccd66e01cbef ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To remove an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to forget the entry.
So if it happens for two threads to remove simultaneously an entry
in MAC table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: e18aba8941b40 ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To add an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to learn the entry.
So if it happens for two threads to add simultaneously an entry in MAC
table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: fc0c3fe7486f2 ("net: lan966x: Add function lan966x_mac_ip_learn()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the HW deletes an entry in MAC table then it generates an
interrupt. The SW will go through it's own list of MAC entries and if it
is not found then it would notify the listeners about this. The problem
is that when the SW will go through it's own list it would take a spin
lock(lan966x->mac_lock) and when it notifies that the entry is deleted.
But to notify the listeners it taking the rtnl_lock which is illegal.
This is fixed by instead of notifying right away that the entry is
deleted, move the entry on a temp list and once, it checks all the
entries then just notify that the entries from temp list are deleted.
Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two bug fixes for irdma:
- x722 does not support 1GB pages, trying to configure them will
corrupt the dma mapping
- Fix a sleep while holding a spinlock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Fix sleep from invalid context BUG
RDMA/irdma: Do not advertise 1GB page size for x722
|
|
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The armada-37xx implementation, armada_37xx_irq_set_type(), uses an MMIO
regmap created by of_syscon_register(), which uses plain spinlocks
(the kind that are sleepable on RT).
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Make this driver create its own MMIO regmap, with use_raw_spinlock=true,
and stop relying on syscon to provide it.
This patch depends on commit 67021f25d952 ("regmap: teach regmap to use
raw spinlocks if requested in the config").
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 2f227605394b ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220716233745.1704677-3-vladimir.oltean@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The armada-37xx implementation, armada_37xx_irq_set_type(), takes a
plain spinlock, the kind that becomes sleepable on RT.
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Replace the driver's irq_lock with a raw spinlock, to disable preemption
even on RT.
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 2f227605394b ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220716233745.1704677-2-vladimir.oltean@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This reverts commit 912f655d78c5d4ad05eac287f23a435924df7144.
This commit introduced a regression that can cause mount hung. The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.
[13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds.
[13148.739691] Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2
[13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13148.745846] task:mount.ocfs2 state:D stack: 0 pid:53045 ppid: 53044 flags:0x00004000
[13148.749354] Call Trace:
[13148.750718] <TASK>
[13148.752019] ? usleep_range+0x90/0x89
[13148.753882] __schedule+0x210/0x567
[13148.755684] schedule+0x44/0xa8
[13148.757270] schedule_timeout+0x106/0x13c
[13148.759273] ? __prepare_to_swait+0x53/0x78
[13148.761218] __wait_for_common+0xae/0x163
[13148.763144] __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2]
[13148.765780] ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.768312] ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.770968] ocfs2_journal_init+0x91/0x340 [ocfs2]
[13148.773202] ocfs2_check_volume+0x39/0x461 [ocfs2]
[13148.775401] ? iput+0x69/0xba
[13148.777047] ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2]
[13148.779646] ocfs2_fill_super+0x54b/0x853 [ocfs2]
[13148.781756] mount_bdev+0x190/0x1b7
[13148.783443] ? ocfs2_remount+0x440/0x440 [ocfs2]
[13148.785634] legacy_get_tree+0x27/0x48
[13148.787466] vfs_get_tree+0x25/0xd0
[13148.789270] do_new_mount+0x18c/0x2d9
[13148.791046] __x64_sys_mount+0x10e/0x142
[13148.792911] do_syscall_64+0x3b/0x89
[13148.794667] entry_SYSCALL_64_after_hwframe+0x170/0x0
[13148.797051] RIP: 0033:0x7f2309f6e26e
[13148.798784] RSP: 002b:00007ffdcee7d408 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[13148.801974] RAX: ffffffffffffffda RBX: 00007ffdcee7d4a0 RCX: 00007f2309f6e26e
[13148.804815] RDX: 0000559aa762a8ae RSI: 0000559aa939d340 RDI: 0000559aa93a22b0
[13148.807719] RBP: 00007ffdcee7d5b0 R08: 0000559aa93a2290 R09: 00007f230a0b4820
[13148.810659] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcee7d420
[13148.813609] R13: 0000000000000000 R14: 0000559aa939f000 R15: 0000000000000000
[13148.816564] </TASK>
To fix it, we can just fix __ocfs2_find_empty_slot. But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.
Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com
Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When alloc_huge_page fails, *pagep is set to NULL without put_page first.
So the hugepage indicated by *pagep is leaked.
Link: https://lkml.kernel.org/r/20220709092629.54291-1-linmiaohe@huawei.com
Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sendfile has to return EAGAIN if out_fd is nonblocking and the write into
it would block.
Here is a small reproducer for the problem:
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/sendfile.h>
#define FILE_SIZE (1UL << 30)
int main(int argc, char **argv) {
int p[2], fd;
if (pipe2(p, O_NONBLOCK))
return 1;
fd = open(argv[1], O_RDWR | O_TMPFILE, 0666);
if (fd < 0)
return 1;
ftruncate(fd, FILE_SIZE);
if (sendfile(p[1], fd, 0, FILE_SIZE) == -1) {
fprintf(stderr, "FAIL\n");
}
if (sendfile(p[1], fd, 0, FILE_SIZE) != -1 || errno != EAGAIN) {
fprintf(stderr, "FAIL\n");
}
return 0;
}
It worked before b964bf53e540, it is stuck after b964bf53e540, and it
works again with this fix.
This regression occurred because do_splice_direct() calls pipe_write
that handles O_NONBLOCK. Here is a trace log from the reproducer:
1) | __x64_sys_sendfile64() {
1) | do_sendfile() {
1) | __fdget()
1) | rw_verify_area()
1) | __fdget()
1) | rw_verify_area()
1) | do_splice_direct() {
1) | rw_verify_area()
1) | splice_direct_to_actor() {
1) | do_splice_to() {
1) | rw_verify_area()
1) | generic_file_splice_read()
1) + 74.153 us | }
1) | direct_splice_actor() {
1) | iter_file_splice_write() {
1) | __kmalloc()
1) 0.148 us | pipe_lock();
1) 0.153 us | splice_from_pipe_next.part.0();
1) 0.162 us | page_cache_pipe_buf_confirm();
... 16 times
1) 0.159 us | page_cache_pipe_buf_confirm();
1) | vfs_iter_write() {
1) | do_iter_write() {
1) | rw_verify_area()
1) | do_iter_readv_writev() {
1) | pipe_write() {
1) | mutex_lock()
1) 0.153 us | mutex_unlock();
1) 1.368 us | }
1) 1.686 us | }
1) 5.798 us | }
1) 6.084 us | }
1) 0.174 us | kfree();
1) 0.152 us | pipe_unlock();
1) + 14.461 us | }
1) + 14.783 us | }
1) 0.164 us | page_cache_pipe_buf_release();
... 16 times
1) 0.161 us | page_cache_pipe_buf_release();
1) | touch_atime()
1) + 95.854 us | }
1) + 99.784 us | }
1) ! 107.393 us | }
1) ! 107.699 us | }
Link: https://lkml.kernel.org/r/20220415005015.525191-1-avagin@gmail.com
Fixes: b964bf53e540 ("teach sendfile(2) to handle send-to-pipe directly")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzkaller reported use-after-free bug as follows:
==================================================================
BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130
Read of size 2 at addr ffff8880751acee8 by task a.out/879
CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1c0/0x2b0
print_address_description.constprop.0.cold+0xd4/0x484
print_report.cold+0x55/0x232
kasan_report+0xbf/0xf0
ntfs_ucsncmp+0x123/0x130
ntfs_are_names_equal.cold+0x2b/0x41
ntfs_attr_find+0x43b/0xb90
ntfs_attr_lookup+0x16d/0x1e0
ntfs_read_locked_attr_inode+0x4aa/0x2360
ntfs_attr_iget+0x1af/0x220
ntfs_read_locked_inode+0x246c/0x5120
ntfs_iget+0x132/0x180
load_system_files+0x1cc6/0x3480
ntfs_fill_super+0xa66/0x1cf0
mount_bdev+0x38d/0x460
legacy_get_tree+0x10d/0x220
vfs_get_tree+0x93/0x300
do_new_mount+0x2da/0x6d0
path_mount+0x496/0x19d0
__x64_sys_mount+0x284/0x300
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3f2118d9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00
RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44
R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The buggy address belongs to the physical page:
page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac
memcg:ffff888101f7e180
anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201
raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
The reason is that struct ATTR_RECORD->name_offset is 6485, end address of
name string is out of bounds.
Fix this by adding sanity check on end address of attribute name string.
[akpm@linux-foundation.org: coding-style cleanups]
[chenxiaosong2@huawei.com: cleanup suggested by Hawkins Jiawei]
Link: https://lkml.kernel.org/r/20220709064511.3304299-1-chenxiaosong2@huawei.com
Link: https://lkml.kernel.org/r/20220707105329.4020708-1-chenxiaosong2@huawei.com
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: ChenXiaoSong <chenxiaosong2@huawei.com>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzkaller reports the following issue:
BUG: unable to handle page fault for address: ffff888021f7e005
PGD 11401067 P4D 11401067 PUD 11402067 PMD 21f7d063 PTE 800fffffde081060
Oops: 0002 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3761 Comm: syz-executor281 Not tainted 5.19.0-rc4-syzkaller-00014-g941e3e791269 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:memset_erms+0x9/0x10 arch/x86/lib/memset_64.S:64
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:ffffc9000329fa90 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000000ffb
RDX: 0000000000000ffb RSI: 0000000000000000 RDI: ffff888021f7e005
RBP: ffffea000087df80 R08: 0000000000000001 R09: ffff888021f7e005
R10: ffffed10043efdff R11: 0000000000000000 R12: 0000000000000005
R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000ffb
FS: 00007fb29d8b2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888021f7e005 CR3: 0000000026e7b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
zero_user_segments include/linux/highmem.h:272 [inline]
folio_zero_range include/linux/highmem.h:428 [inline]
truncate_inode_partial_folio+0x76a/0xdf0 mm/truncate.c:237
truncate_inode_pages_range+0x83b/0x1530 mm/truncate.c:381
truncate_inode_pages mm/truncate.c:452 [inline]
truncate_pagecache+0x63/0x90 mm/truncate.c:753
simple_setattr+0xed/0x110 fs/libfs.c:535
secretmem_setattr+0xae/0xf0 mm/secretmem.c:170
notify_change+0xb8c/0x12b0 fs/attr.c:424
do_truncate+0x13c/0x200 fs/open.c:65
do_sys_ftruncate+0x536/0x730 fs/open.c:193
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fb29d900899
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb29d8b2318 EFLAGS: 00000246 ORIG_RAX: 000000000000004d
RAX: ffffffffffffffda RBX: 00007fb29d988408 RCX: 00007fb29d900899
RDX: 00007fb29d900899 RSI: 0000000000000005 RDI: 0000000000000003
RBP: 00007fb29d988400 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb29d98840c
R13: 00007ffca01a23bf R14: 00007fb29d8b2400 R15: 0000000000022000
</TASK>
Modules linked in:
CR2: ffff888021f7e005
---[ end trace 0000000000000000 ]---
Eric Biggers suggested that this happens when
secretmem_setattr()->simple_setattr() races with secretmem_fault() so that
a page that is faulted in by secretmem_fault() (and thus removed from the
direct map) is zeroed by inode truncation right afterwards.
Use mapping->invalidate_lock to make secretmem_fault() and
secretmem_setattr() mutually exclusive.
[rppt@linux.ibm.com: v3]
Link: https://lkml.kernel.org/r/20220714091337.412297-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20220707165650.248088-1-rppt@kernel.org
Reported-by: syzbot+9bd2b7adbd34b30b87e4@syzkaller.appspotmail.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Originally copy_hugetlb_page_range() handles migration entries and
hwpoisoned entries in similar manner. But recently the related code path
has more code for migration entries, and when
is_writable_migration_entry() was converted to
!is_readable_migration_entry(), hwpoison entries on source processes got
to be unexpectedly updated (which is legitimate for migration entries, but
not for hwpoison entries). This results in unexpected serious issues like
kernel panic when forking processes with hwpoison entries in pmd.
Separate the if branch into one for hwpoison entries and one for migration
entries.
Link: https://lkml.kernel.org/r/20220704013312.2415700-3-naoya.horiguchi@linux.dev
Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.18]
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
FSDAX page refcounts are 1-based, rather than 0-based: if refcount is
1, then the page is freed. The FSDAX pages can be pinned through GUP,
then they will be unpinned via unpin_user_page() using a folio variant
to put the page, however, folio variants did not consider this special
case, the result will be to miss a wakeup event (like the user of
__fuse_dax_break_layouts()). This results in a task being permanently
stuck in TASK_INTERRUPTIBLE state.
Since FSDAX pages are only possibly obtained by GUP users, so fix GUP
instead of folio_put() to lower overhead.
Link: https://lkml.kernel.org/r/20220705123532.283-1-songmuchun@bytedance.com
Fixes: d8ddc099c6b3 ("mm/gup: Add gup_put_folio()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have an application with a lot of threads that use a shared mmap backed
by tmpfs mounted with -o huge=within_size. This application started
leaking loads of huge pages when we upgraded to a recent kernel.
Using the page ref tracepoints and a BPF program written by Tejun Heo we
were able to determine that these pages would have multiple refcounts from
the page fault path, but when it came to unmap time we wouldn't drop the
number of refs we had added from the faults.
I wrote a reproducer that mmap'ed a file backed by tmpfs with -o
huge=always, and then spawned 20 threads all looping faulting random
offsets in this map, while using madvise(MADV_DONTNEED) randomly for huge
page aligned ranges. This very quickly reproduced the problem.
The problem here is that we check for the case that we have multiple
threads faulting in a range that was previously unmapped. One thread maps
the PMD, the other thread loses the race and then returns 0. However at
this point we already have the page, and we are no longer putting this
page into the processes address space, and so we leak the page. We
actually did the correct thing prior to f9ce0be71d1f, however it looks
like Kirill copied what we do in the anonymous page case. In the
anonymous page case we don't yet have a page, so we don't have to drop a
reference on anything. Previously we did the correct thing for file based
faults by returning VM_FAULT_NOPAGE so we correctly drop the reference on
the page we faulted in.
Fix this by returning VM_FAULT_NOPAGE in the pmd_devmap_trans_unstable()
case, this makes us drop the ref on the page properly, and now my
reproducer no longer leaks the huge pages.
[josef@toxicpanda.com: v2]
Link: https://lkml.kernel.org/r/e90c8f0dbae836632b669c2afc434006a00d4a67.1657721478.git.josef@toxicpanda.com
Link: https://lkml.kernel.org/r/2b798acfd95c9ab9395fe85e8d5a835e2e10a920.1657051137.git.josef@toxicpanda.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Chris Mason <clm@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
seth.forshee@canonical.com is no longer valid, use sforshee@kernel.org
instead.
Link: https://lkml.kernel.org/r/20220628200734.424495-1-sforshee@kernel.org
Signed-off-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
An undefined-behavior issue has not been completely fixed since commit
d14f5efadd84 ("tmpfs: fix undefined-behaviour in shmem_reconfigure()").
In the commit, check in the shmem_reconfigure() is added in remount
process to avoid the Ubsan problem. However, the check is not added to
the mount process. It causes inconsistent results between mount and
remount. The operations to reproduce the problem in user mode as follows:
If nr_blocks is set to 0x8000000000000000, the mounting is successful.
# mount tmpfs /dev/shm/ -t tmpfs -o nr_blocks=0x8000000000000000
However, when -o remount is used, the mount fails because of the
check in the shmem_reconfigure()
# mount tmpfs /dev/shm/ -t tmpfs -o remount,nr_blocks=0x8000000000000000
mount: /dev/shm: mount point not mounted or bad option.
Therefore, add checks in the shmem_parse_one() function and remove the
check in shmem_reconfigure() to avoid this problem.
Link: https://lkml.kernel.org/r/20220629124324.1640807-1-wangzhaolong1@huawei.com
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Cc: Luo Meng <luomeng12@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch solves two issues.
(1) The pool allocated by memblock needs to unregister from
kmemleak scanning. Apply kmemleak_ignore_phys to replace the
original kmemleak_free as its address now is stored in the phys tree.
(2) The pool late allocated by page-alloc doesn't need to unregister.
Move out the freeing operation from its call path.
Link: https://lkml.kernel.org/r/20220628113714.7792-2-yee.lee@mediatek.com
Fixes: 0c24e061196c21d5 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA")
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamp fix from Thierry Reding:
"A single fix for an out-of-sync kerneldoc comment"
* tag 'hte/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
gpiolib: cdev: Fix kernel doc for struct line
|
|
supported
Commit 0651ab90e4ad ("ACPI: CPPC: Check _OSC for flexible address space")
changed _CPC probing to require flexible address space to be negotiated
for CPPC to work.
However it was observed that this caused a regression for Arek's ROG
Zephyrus G15 GA503QM which previously CPPC worked, but now it stopped
working.
To avoid causing a regression waive this failure when the CPU is known
to support CPPC.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216248
Fixes: 0651ab90e4ad ("ACPI: CPPC: Check _OSC for flexible address space")
Reported-and-tested-by: Arek Ruśniak <arek.rusi@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix debug prints, by adding missing state prints.
Extend iavf_state_str by strings for __IAVF_INIT_EXTENDED_CAPS and
__IAVF_INIT_CONFIG_ADAPTER.
Without this patch, when enabling debug prints for iavf.h, user will
see:
iavf 0000:06:0e.0: state transition from:__IAVF_INIT_GET_RESOURCES to:__IAVF_UNKNOWN_STATE
iavf 0000:06:0e.0: state transition from:__IAVF_UNKNOWN_STATE to:__IAVF_UNKNOWN_STATE
Fixes: 605ca7c5c670 ("iavf: Fix kernel BUG in free_msi_irqs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix memory leak caused by not handling dummy receive descriptor properly.
iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive
descriptors. Without this patch, when the hardware writes a dummy
descriptor, iavf would not free the page allocated for the previous receive
buffer. This is an unlikely event but can still happen.
[Jesse: massaged commit message]
Fixes: efa14c398582 ("iavf: allow null RX descriptors")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove from supported_coalesce_params ETHTOOL_COALESCE_MAX_FRAMES
and ETHTOOL_COALESCE_MAX_FRAMES_IRQ. As tx-frames-irq allowed
user to change budget for iavf_clean_tx_irq, remove work_limit
and use define for budget.
Without this patch there would be possibility to change rx/tx-frames
and rx/tx-frames-irq, which for rx/tx-frames did nothing, while for
rx/tx-frames-irq it changed rx/tx-frames and only changed budget
for cleaning NAPI poll.
Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
