| Age | Commit message (Collapse) | Author |
|---|
|
Just to avoid confusion when people only reads this prototype.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
This series contains fixes/updates to ixgbe only. There are three
PTP fixes, polling loop fix and the addition of a device id (X540-AT1).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit d2d68ba9fe8 (ipv4: Cache input routes in fib_info nexthops.)
introduced a regression for forwarding.
This was hard to reproduce but the symptom was that packets were
delivered to local host instead of being forwarded.
David suggested to add fib_type to fib_info so that we dont
inadvertently share same fib_info for different purposes.
With help from Julian Anastasov who provided very helpful
hints, reproduced here :
<quote>
Can it be a problem related to fib_info reuse
from different routes. For example, when local IP address
is created for subnet we have:
broadcast 192.168.0.255 dev DEV proto kernel scope link src
192.168.0.1
192.168.0.0/24 dev DEV proto kernel scope link src 192.168.0.1
local 192.168.0.1 dev DEV proto kernel scope host src 192.168.0.1
The "dev DEV proto kernel scope link src 192.168.0.1" is
a reused fib_info structure where we put cached routes.
The result can be same fib_info for 192.168.0.255 and
192.168.0.0/24. RTN_BROADCAST is cached only for input
routes. Incoming broadcast to 192.168.0.255 can be cached
and can cause problems for traffic forwarded to 192.168.0.0/24.
So, this patch should solve the problem because it
separates the broadcast from unicast traffic.
And the ip_route_input_slow caching will work for
local and broadcast input routes (above routes 1 and 3) just
because they differ in scope and use different fib_info.
</quote>
Many thanks to Chris Clayton for his patience and help.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Bisected-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit:
6d99c4c can: mpc5xxx_can: make data used as *of_device_id.data const
both "struct mpc5xxx_can_data mpc5200_can_data" and "mpc5121_can_data" are
marked as "const" but also as "__devinitdata". This leads to the following
compile error:
drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict
drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict
This patch changes the "__devinitdata" to "__devinitconst" and marks the
"struct of_device_id mpc5xxx_can_table" as "const" and "__devinitconst", too.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The m68k arch doesn't have a kvm_para.h (unlike most or maybe all other
arches), but there is one in asm-generic. This means that:
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/include/asm-$(SRCARCH)/kvm_para.h \
$(INSTALL_HDR_PATH)/include/asm-*/kvm_para.h),)
header-y += kvm_para.h
endif
gets it wrong because it is invoked twice during the header installation - and
on the second occasion, asm-generic/kvm_para.h has been installed in usr/,
thus triggering a attempt to install asm-m68k/kvm_para.h which will fail.
There are three headers with this sort of conditional logic: a.out.h, kvm.h
and kvm_para.h. For all three of them, change the logic to be something like:
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
which finds the header in only the two places it should be found, and doesn't
get incorrectly triggered by the installation of asm-generic's version.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Avoid later problems with c6x's asm/signal.h lacking __KERNEL__ guards.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull KVM updates from Avi Kivity:
"Highlights of the changes for this release include support for vfio
level triggered interrupts, improved big real mode support on older
Intels, a streamlines guest page table walker, guest APIC speedups,
PIO optimizations, better overcommit handling, and read-only memory."
* tag 'kvm-3.7-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits)
KVM: s390: Fix vcpu_load handling in interrupt code
KVM: x86: Fix guest debug across vcpu INIT reset
KVM: Add resampling irqfds for level triggered interrupts
KVM: optimize apic interrupt delivery
KVM: MMU: Eliminate pointless temporary 'ac'
KVM: MMU: Avoid access/dirty update loop if all is well
KVM: MMU: Eliminate eperm temporary
KVM: MMU: Optimize is_last_gpte()
KVM: MMU: Simplify walk_addr_generic() loop
KVM: MMU: Optimize pte permission checks
KVM: MMU: Update accessed and dirty bits after guest pagetable walk
KVM: MMU: Move gpte_access() out of paging_tmpl.h
KVM: MMU: Optimize gpte_access() slightly
KVM: MMU: Push clean gpte write protection out of gpte_access()
KVM: clarify kvmclock documentation
KVM: make processes waiting on vcpu mutex killable
KVM: SVM: Make use of asm.h
KVM: VMX: Make use of asm.h
KVM: VMX: Make lto-friendly
KVM: x86: lapic: Clean up find_highest_vector() and count_vectors()
...
Conflicts:
arch/s390/include/asm/processor.h
arch/x86/kvm/i8259.c
|
|
The c6x signal.h includes the asm-generic version and provides
a couple of extern declarations. David Howells pointed out that
the externs needed to be protected by ifdef __KERNEL__. As it
turns out, the externs aren't really needed since the functions
are only called from asm code. So this patch gets rid of the
c6x signal.h and uses just the asm-generic version.
Signed-off-by: Mark Salter <msalter@redhat.com>
|
|
Fengguang correctly points out that the firmware reading should not use
vfs_read(), since the buffer is in kernel space.
The vfs_read() just happened to work for kernel threads, but sparse
warns about the incorrect address spaces, and it's definitely incorrect
and could fail for other users of the firmware loading.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext3 & udf fixes from Jan Kara:
"Shortlog pretty much says it all.
The interesting bits are UDF support for direct IO and ext3 fix for a
long standing oops in data=journal mode."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
jbd: Fix assertion failure in commit code due to lacking transaction credits
UDF: Add support for O_DIRECT
ext3: Replace 0 with NULL for pointer in super.c file
udf: add writepages support for udf
ext3: don't clear orphan list on ro mount with errors
reiserfs: Make reiserfs_xattr_handlers static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc update from Ohad Ben-Cohen:
- Remoteproc Recovery - by Fernando Guzman Lugo
When a remote processor crash is detected, this mechanism will remove
all virtio children devices, wait until their drivers let go, hard
reset the remote processor and reload the firmware (resulting in the
relevant virtio children devices re-added). Essentially the entire
software stack is reset, together with the relevant hardware, so
users don't have to reset the entire phone.
- STE Modem driver is added - by Sjur Brændeland
- OMAP DSP boot address support is added - by Juan Gutierrez
- A handful of fixes/cleanups - Sjur Brændeland, Dan Carpenter, Emil
Goode
* tag 'remoteproc-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: Fix use of format specifyer
remoteproc: fix a potential NULL-dereference on cleanup
remoteproc: select VIRTIO to avoid build breakage
remoteproc: return -EFAULT on copy_from_user failure
remoteproc: snprintf() can return more than was printed
remoteproc: Add STE modem driver
remtoteproc: maintain max notifyid
remoteproc: create a 'recovery' debugfs entry
remoteproc: add actual recovery implementation
remoteproc: add rproc_report_crash function to notify rproc crashes
remoteproc: Add dependency to HAS_DMA
remoteproc/omap: set bootaddr support
|
|
Pull crypto update from Herbert Xu:
- Optimised AES/SHA1 for ARM.
- IPsec ESN support in talitos and caam.
- x86_64/avx implementation of cast5/cast6.
- Add/use multi-algorithm registration helpers where possible.
- Added IBM Power7+ in-Nest support.
- Misc fixes.
Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto
config options being added next to the new ARM ones.
[ Side note: cut-and-paste duplicate help texts make those conflicts
harder to read than necessary, thanks to git being smart about
minimizing conflicts and maximizing the common parts... ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: x86/glue_helper - fix storing of new IV in CBC encryption
crypto: cast5/avx - fix storing of new IV in CBC encryption
crypto: tcrypt - add missing tests for camellia and ghash
crypto: testmgr - make test_aead also test 'dst != src' code paths
crypto: testmgr - make test_skcipher also test 'dst != src' code paths
crypto: testmgr - add test vectors for CTR mode IV increasement
crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6)
crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template
crypto: caam - increase TRNG clocks per sample
crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable()
crypto: tegra-aes - fix error return code
crypto: crypto4xx - fix error return code
crypto: hifn_795x - fix error return code
crypto: ux500 - fix error return code
crypto: caam - fix error IDs for SEC v5.x RNG4
hwrng: mxc-rnga - Access data via structure
hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework
crypto: caam - add IPsec ESN support
crypto: 842 - remove .cra_list initialization
Revert "[CRYPTO] cast6: inline bloat--"
...
|
|
Split compound conditionals containing __KERNEL__ in Arm64 where possible to
make it easier for the UAPI disintegration scripts to handle them.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
asm-generic/unistd.h and a number of asm/unistd.h files have been given
reinclusion guards that allow the guard to be overridden if __SYSCALL is
defined. Unfortunately, these files define __SYSCALL and don't undefine it
when they've finished with it, thus rendering the guard ineffective.
The reason for this override is to allow the file to be #included multiple
times with different settings on __SYSCALL for purposes like generating syscall
tables.
The following guards are problematic:
arch/arm64/include/asm/unistd.h:#if !defined(__ASM_UNISTD_H) || defined(__SYSCALL)
arch/arm64/include/asm/unistd32.h:#if !defined(__ASM_UNISTD32_H) || defined(__SYSCALL)
arch/c6x/include/asm/unistd.h:#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL)
arch/hexagon/include/asm/unistd.h:#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL)
arch/openrisc/include/asm/unistd.h:#if !defined(__ASM_OPENRISC_UNISTD_H) || defined(__SYSCALL)
arch/score/include/asm/unistd.h:#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
arch/tile/include/asm/unistd.h:#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
arch/unicore32/include/asm/unistd.h:#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
include/asm-generic/unistd.h:#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)
On the assumption that the guards' ineffectiveness has passed unnoticed, just
remove these guards entirely.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Glue_helper incorrectly XORs new IV over old IV at end of CBC encryption
function when it should store. This causes CBC encryption to give
incorrect output on multi-page encryption requests.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are a number of issues in the recent IOMMU pools code:
- On a preempt kernel we might switch CPUs in the middle of building
a scatter gather list. When this happens the handle hint passed in
no longer falls within the local CPU's pool. Check for this and
fall back to the pool hint.
- We were missing a spin_unlock/spin_lock in one spot where we
switch pools.
- We need to provide locking around dart_tlb_invalidate_all and
dart_tlb_invalidate_one now that the global lock is gone.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@kernel.org> [v3.6]
|
|
In 2fae7cdb60240e2e2d9b378afbf6d9fcce8a3890 ("powerpc: Fix VMX in
interrupt check in POWER7 copy loops"), Anton inadvertently
introduced a regression for memcpy on POWER7 machines. copyuser and
memcpy diverge slightly in their use of cr1 (copyuser doesn't use it,
but memcpy does) and you end up clobbering that register with your fix.
That results in (taken from an FC18 kernel):
[ 18.824604] Unrecoverable VMX/Altivec Unavailable Exception f20 at c000000000052f40
[ 18.824618] Oops: Unrecoverable VMX/Altivec Unavailable Exception, sig: 6 [#1]
[ 18.824623] SMP NR_CPUS=1024 NUMA pSeries
[ 18.824633] Modules linked in: tg3(+) be2net(+) cxgb4(+) ipr(+) sunrpc xts lrw gf128mul dm_crypt dm_round_robin dm_multipath linear raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua squashfs cramfs
[ 18.824705] NIP: c000000000052f40 LR: c00000000020b874 CTR: 0000000000000512
[ 18.824709] REGS: c000001f1fef7790 TRAP: 0f20 Not tainted (3.6.0-0.rc6.git0.2.fc18.ppc64)
[ 18.824713] MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI> CR: 4802802e XER: 20000010
[ 18.824726] SOFTE: 0
[ 18.824728] CFAR: 0000000000000f20
[ 18.824731] TASK = c000000fa7128400[0] 'swapper/24' THREAD: c000000fa7480000 CPU: 24
GPR00: 00000000ffffffc0 c000001f1fef7a10 c00000000164edc0 c000000f9b9a8120
GPR04: c000000f9b9a8124 0000000000001438 0000000000000060 03ffffff064657ee
GPR08: 0000000080000000 0000000000000010 0000000000000020 0000000000000030
GPR12: 0000000028028022 c00000000ff25400 0000000000000001 0000000000000000
GPR16: 0000000000000000 7fffffffffffffff c0000000016b2180 c00000000156a500
GPR20: c000000f968c7a90 c0000000131c31d8 c000001f1fef4000 c000000001561d00
GPR24: 000000000000000a 0000000000000000 0000000000000001 0000000000000012
GPR28: c000000fa5c04f80 00000000000008bc c0000000015c0a28 000000000000022e
[ 18.824792] NIP [c000000000052f40] .memcpy_power7+0x5a0/0x7c4
[ 18.824797] LR [c00000000020b874] .pcpu_free_area+0x174/0x2d0
[ 18.824800] Call Trace:
[ 18.824803] [c000001f1fef7a10] [c000000000052c14] .memcpy_power7+0x274/0x7c4 (unreliable)
[ 18.824809] [c000001f1fef7b10] [c00000000020b874] .pcpu_free_area+0x174/0x2d0
[ 18.824813] [c000001f1fef7bb0] [c00000000020ba88] .free_percpu+0xb8/0x1b0
[ 18.824819] [c000001f1fef7c50] [c00000000043d144] .throtl_pd_exit+0x94/0xd0
[ 18.824824] [c000001f1fef7cf0] [c00000000043acf8] .blkg_free+0x88/0xe0
[ 18.824829] [c000001f1fef7d90] [c00000000018c048] .rcu_process_callbacks+0x2e8/0x8a0
[ 18.824835] [c000001f1fef7e90] [c0000000000a8ce8] .__do_softirq+0x158/0x4d0
[ 18.824840] [c000001f1fef7f90] [c000000000025ecc] .call_do_softirq+0x14/0x24
[ 18.824845] [c000000fa7483650] [c000000000010e80] .do_softirq+0x160/0x1a0
[ 18.824850] [c000000fa74836f0] [c0000000000a94a4] .irq_exit+0xf4/0x120
[ 18.824854] [c000000fa7483780] [c000000000020c44] .timer_interrupt+0x154/0x4d0
[ 18.824859] [c000000fa7483830] [c000000000003be0] decrementer_common+0x160/0x180
[ 18.824866] --- Exception: 901 at .plpar_hcall_norets+0x84/0xd4
[ 18.824866] LR = .check_and_cede_processor+0x48/0x80
[ 18.824871] [c000000fa7483b20] [c00000000007f018] .check_and_cede_processor+0x18/0x80 (unreliable)
[ 18.824877] [c000000fa7483b90] [c00000000007f104] .dedicated_cede_loop+0x84/0x150
[ 18.824883] [c000000fa7483c50] [c0000000006bc030] .cpuidle_enter+0x30/0x50
[ 18.824887] [c000000fa7483cc0] [c0000000006bc9f4] .cpuidle_idle_call+0x104/0x720
[ 18.824892] [c000000fa7483d80] [c000000000070af8] .pSeries_idle+0x18/0x40
[ 18.824897] [c000000fa7483df0] [c000000000019084] .cpu_idle+0x1a4/0x380
[ 18.824902] [c000000fa7483ec0] [c0000000008a4c18] .start_secondary+0x520/0x528
[ 18.824907] [c000000fa7483f90] [c0000000000093f0] .start_secondary_prolog+0x10/0x14
[ 18.824911] Instruction dump:
[ 18.824914] 38840008 90030000 90e30004 38630008 7ca62850 7cc300d0 78c7e102 7cf01120
[ 18.824923] 78c60660 39200010 39400020 39600030 <7e00200c> 7c0020ce 38840010 409f001c
[ 18.824935] ---[ end trace 0bb95124affaaa45 ]---
[ 18.825046] Unrecoverable VMX/Altivec Unavailable Exception f20 at c000000000052d08
I believe the right fix is to make memcpy match usercopy and not use
cr1.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@kernel.org> [v3.6]
|
|
Pull drm merge (part 1) from Dave Airlie:
"So first of all my tree and uapi stuff has a conflict mess, its my
fault as the nouveau stuff didn't hit -next as were trying to rebase
regressions out of it before we merged.
Highlights:
- SH mobile modesetting driver and associated helpers
- some DRM core documentation
- i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
combined pte writing, ilk rc6 support,
- nouveau: major driver rework into a hw core driver, makes features
like SLI a lot saner to implement,
- psb: add eDP/DP support for Cedarview
- radeon: 2 layer page tables, async VM pte updates, better PLL
selection for > 2 screens, better ACPI interactions
The rest is general grab bag of fixes.
So why part 1? well I have the exynos pull req which came in a bit
late but was waiting for me to do something they shouldn't have and it
looks fairly safe, and David Howells has some more header cleanups
he'd like me to pull, that seem like a good idea, but I'd like to get
this merge out of the way so -next dosen't get blocked."
Tons of conflicts mostly due to silly include line changes, but mostly
mindless. A few other small semantic conflicts too, noted from Dave's
pre-merged branch.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
drm/nv98/crypt: fix fuc build with latest envyas
drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
drm/nv41/vm: fix and enable use of "real" pciegart
drm/nv44/vm: fix and enable use of "real" pciegart
drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
drm/nouveau: store supported dma mask in vmmgr
drm/nvc0/ibus: initial implementation of subdev
drm/nouveau/therm: add support for fan-control modes
drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
drm/nouveau/therm: calculate the pwm divisor on nv50+
drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
drm/nouveau/therm: move thermal-related functions to the therm subdev
drm/nouveau/bios: parse the pwm divisor from the perf table
drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
drm/nouveau/therm: rework thermal table parsing
drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
drm/nouveau: fix pm initialization order
drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
drm/nouveau: log channel debug/error messages from client object rather than drm client
drm/nouveau: have drm debugging macros build on top of core macros
...
|
|
RX/TX CQs will now be selected from a per HCA pool. For the RX flow
this has the effect of using different interrupt vectors when using
low level drivers (such as mlx4) that map the "vector" param provided
by the ULP on CQ creation to a dedicated IRQ/MSI-X vector. This
allows the RX flow processing of IO responses to be distributed across
multiple CPUs.
QPs (--> iSER sessions) are assigned to CQs in round robin order using
the CQ with the minimum number of sessions attached to it.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace compile fix from Eric W Biederman:
"This tree contains a trivial build fix for one of the staging drivers
when user namespace support is enabled"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Fix build of drivers/staging/dgrp
|
|
This is a first step in allowing people to by-pass udev for loading
device firmware. Current versions of udev will deadlock (causing us to
block for the 30 second timeout) under some circumstances if the
firmware is loaded as part of the module initialization path, and this
is causing problems for media drivers in particular.
The current patch hardcodes the firmware path that udev uses by default,
and will fall back to the legacy udev mode if the firmware cannot be
found there. We'd like to add support for both configuring the paths
and the fallback behaviour, but in the meantime this hopefully fixes the
immediate problem, while also giving us a way forward.
[ v2: Some VFS layer interface cleanups suggested by Al Viro ]
[ v3: use the default udev paths suggested by Kay Sievers ]
Suggested-by: Ivan Kalvachev <ikalvachev@gmail.com>
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kay Sievers <kay@redhat.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
C6X had no defconfig, so DSK6455 is as good as any.
Signed-off-by: Mark Salter <msalter@redhat.com>
|
|
Bumpthe version of the nes driver to reflect recent fixes.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Remove unnecessary if-else statement -- we do the same thing either way.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Static code analyzer cppcheck points out a missing break.
Reported-by: David Binderman <dcb314@hotmail.com>
Addresses: <https://bugzilla.kernel.org/show_bug.cgi?id=47671>
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Currently, the InfiniBand stack does not support flow steering at the
verbs level -- the only usage of flow steering in the IB driver is for
L2 multicast attaches. We need to add the IB case to procedure
mlx4_QP_FLOW_STEERING_ATTACH_wrapper() to allow IPoIB to work on VFs
on ConnectX-3 when flow steering is enabled.
Currently, the IB case in mlx4_QP_FLOW_STEERING_ATTACH_wrapper() is missing,
so the procedure returns -EINVAL and IPoIB on VFs breaks.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Stefan Richter:
- feed GUIDs of FireWire nodes to the random pool
- more complete quirk handling of a TI S400B phy
- avoid holding a core lock while calling into highlevel drivers
* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: addendum to address handler RCU conversion
firewire: remove global lock around address handlers, convert to RCU
firewire: ohci: get IR bit from TSB41BA3D phy
firewire: core: feed /dev/random with devices' GUIDs
|
|
git://git.infradead.org/users/dhowells/linux-headers
Pull preparatory patches for user API disintegration from David Howells:
"The patches herein prepare for the extraction of the Userspace API
bits from the various header files named in the Kbuild files.
New subdirectories are created under either include/uapi/ or
arch/x/include/uapi/ that correspond to the subdirectory containing
that file under include/ or arch/x/include/.
The new subdirs under the uapi/ directory are populated with Kbuild
files that mostly do nothing at this time. Further patches will
disintegrate the headers in each original directory and fill in the
Kbuild files as they do it.
These patches also:
(1) fix up #inclusions of "foo.h" rather than <foo.h>.
(2) Remove some redundant #includes from the DRM code.
(3) Make the kernel build infrastructure handle Kbuild files both in
the old places and the new UAPI place that both specify headers
to be exported.
(4) Fix some kernel tools that #include kernel headers during their
build.
I have compile tested this with allyesconfig against x86_64,
allmodconfig against i386 and a scattering of additional defconfigs of
other arches. Prepared for main script
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>"
* tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers:
UAPI: Plumb the UAPI Kbuilds into the user header installation and checking
UAPI: x86: Differentiate the generated UAPI and internal headers
UAPI: Remove the objhdr-y export list
UAPI: Move linux/version.h
UAPI: Set up uapi/asm/Kbuild.asm
UAPI: x86: Fix insn_sanity build failure after UAPI split
UAPI: x86: Fix the test_get_len tool
UAPI: (Scripted) Set up UAPI Kbuild files
UAPI: Partition the header include path sets and add uapi/ header directories
UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers
UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
|
|
Commit d760fc37b0f74502b3f748951f22c6683b079a8e caused
1G functions to allocate rx rings which were 1/10 of the
size of 10G functions' rx rings.
However, it also caused 10G functions on 5771x boards to
allocate small rings, which limits their possible (default)
rx throughput. This patch causes all 10G functions to use
rings of intended length by default.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes memory allocation to reduce stack footprint
Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit commit 4c071ee5268f7234c3d084b6093bebccc28cdcba ("arm:
initial Xen support") PV on HVM guests can be xen_initial_domain.
However PV on HVM guests might have an unitialized xen_start_info, so
check before accessing its fields.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Explicitly test for GLOBAL_ROOT_UID and GLOBAL_ROOT_GID
instead of using 0, allowing dgrp to compile and work
properly when user namespace support is enabled.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Pull devicetree updates from Rob Herring:
- Import of latest upstream device tree compiler (dtc)
- New function of_get_child_by_name
- Support for #size-cells of 0 and #addr-cells of >2
- Couple of DT binding documentation updates
Fix up trivial conflicts due to of_get_child_by_name() having been added
next to the new of_get_next_available_child().
* tag 'dt-for-3.7' of git://sources.calxeda.com/kernel/linux:
MAINTAINERS: add scripts/dtc under Devicetree maintainers
dtc: import latest upstream dtc
dt: Document general interrupt controller bindings
dt/s3c64xx/spi: Use of_get_child_by_name to get a named child
dt: introduce of_get_child_by_name to get child node by name
of: i2c: add support for wakeup-source property
of/address: Handle #address-cells > 2 specially
DT: export of_irq_to_resource_table()
devicetree: serial: Add documentation for imx serial
devicetree: pwm: mxs-pwm.txt: Fix reg field annotation
of: Allow busses with #size-cells=0
|
|
Pull JFS update from Dave Kleikamp:
"JFS TRIM support and some minor fixes"
* tag 'jfs-3.7' of git://github.com/kleikamp/linux-shaggy:
jfs: Fix do_div precision in commit b40c2e66
JFS: use list_move instead of list_del/list_add
jfs: Remove obsolete email address
fs/jfs: TRIM support for JFS Filesystem
|
|
This patch adds device support for Ethernet Controller X540-AT1.
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The loop in ixgbe_reinit_fdir_tables_82599() only polls for up to 100us
resulting in failures to update the FDIR filter table at 1Gbps and 10Gbps
when under load.
The poll times for FDIRCTRL.INIT_DONE are 55us, 550us and 5.5ms for 10Gbps,
1Gbps and 100Mbps respectively.
This patch sets the wait time to be the same as in ixgbe_fdir_enable_82599()
Reported-by: Bhushan <shashi-sm@users.sf.net>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch fixes a development issue that occurred due to invalid modes reported
in the ethtool get_ts_info function. The issue is resolved by removing
unsupported modes from the Rx supported list.
CC: stable <stable@vger.kernel.org> [3.5]
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Driver was enabling PPS interrupt even when user wasn't enabling it via the
ptp core. This patch fixes the PPS so that it is only enabled explicitly, and
moves the interrupt enabling code into the correct location in the driver
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Stable <stable@vger.kernel.org> [3.5]
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch fixes a bug in the method used for calculating the trigger
alignment for SDP0 when enabling a PPS output on the X540. The alignment math
wasn't properly taking into account the overflow cyclecounter, and was
misaligning the pin triggers so that two X540 devices synced properly had
mis-aligned SDP pins. This patch fixes the math to calculate the correct
seconds alignment for the PPS signal.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
We're starting to need a channel through which we can funnel EFI
patches to make sure they get merged in a timely fashion. Matthew and
Peter seem happy enough for me to take that bullet.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull CRIS changes from Jesper Nilsson:
"Removal of some unused code from the CRIS port"
* tag 'cris-for-linus-3.7' of git://jni.nu/cris:
CRIS: Remove VCS simulator specific code
cris/PCI: remove pcibios_assign_resources()
|
|
Pull sparc fixes from David Miller:
"Some quick fixes after today's merge-window pull"
1) Add missing dependency on Sparc DES driver, oops. From Dave Jones.
2) Tell GCC that prom_printf() is printf-like and fix the few
resultiing warnings. From Akinobu Mita.
3) Niagara-2 memcpy doesn't provide it's return value correctly in some
circumstances.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fix format string argument for prom_printf()
crypto: Build SPARC DES algorithms on SPARC only.
sparc64: Fix return value of Niagara-2 memcpy.
|
|
The VCS simulator was a tool used in the development of the chip
and is no longer used or necessary.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
There's no caller of pcibios_assign_resources() in the tree. It is
exported, so an out-of-tree module *could* call it, but no other arch
exports pcibios_assign_resources(), so it would have to be a CRIS-specific
module. I doubt such a caller exists.
CC: Mikael Starvik <starvik@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
|
|
Fix up a trivial conflict with NUMA_NO_NODE cleanups.
Conflicts:
mm/slob.c
Signed-off-by: Pekka Enberg <penberg@kernel.org>
|
