summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-23Merge branches 'acpi-debug', 'acpi-reboot', 'acpi-processor', 'acpi-dptf' ↵Rafael J. Wysocki
and 'acpi-utils' * acpi-debug: ACPI: debug: don't allow debugging when ACPI is disabled * acpi-reboot: ACPI: reboot: Avoid racing after writing to ACPI RESET_REG * acpi-processor: ACPI: processor: remove comment regarding string _UID support * acpi-dptf: ACPI: DPTF: Add ACPI_DPTF Kconfig menu ACPI: DPTF: Fix participant driver names * acpi-utils: ACPI: utils: remove unreachable breaks
2020-10-23Merge branch 'pm-avs'Rafael J. Wysocki
* pm-avs: PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
2020-10-23Merge branches 'pm-core', 'pm-sleep', 'pm-tools' and 'powercap'Rafael J. Wysocki
* pm-core: PM: runtime: Fix typo in pm_runtime_set_active() helper comment * pm-sleep: PM: sleep: remove unreachable break * pm-tools: cpupower: speed up generating git version string cpupowerutils: fix spelling mistake "dependant" -> "dependent" * powercap: powercap: Fix typo in Kconfig "Plance" -> "Plane" powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection
2020-10-23Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq: cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver cpufreq: Improve code around unlisted freq check * pm-cpuidle: intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain
2020-10-23vdpa_sim: implement get_iova_range()Jason Wang
This implements a sample get_iova_range() for the simulator which advertise [0, ULLONG_MAX] as the valid range. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20201023090043.14430-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-23vhost: vdpa: report iova rangeJason Wang
This patch introduces a new ioctl for vhost-vdpa device that can report the iova range by the device. For device that implements get_iova_range() method, we fetch it from the vDPA device. If device doesn't implement get_iova_range() but depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY, otherwise [0, ULLONG_MAX] is assumed. For safety, this patch also rules out the map request which is not in the valid range. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20201023090043.14430-3-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-23vdpa: introduce config op to get valid iova rangeJason Wang
This patch introduce a config op to get valid iova range from the vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20201023090043.14430-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-23gfs2: Recover statfs info in journal headAbhi Das
Apply the outstanding statfs changes in the journal head to the master statfs file. Zero out the local statfs file for good measure. Previously, statfs updates would be read in from the local statfs inode and synced to the master statfs inode during recovery. We now use the statfs updates in the journal head to update the master statfs inode instead of reading in from the local statfs inode. To preserve backward compatibility with kernels that can't do this, we still need to keep the local statfs inode up to date by writing changes to it. At some point in the future, we can do away with the local statfs inodes altogether and keep the statfs changes solely in the journal. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23gfs2: lookup local statfs inodes prior to journal recoveryAbhi Das
We need to lookup the master statfs inode and the local statfs inodes earlier in the mount process (in init_journal) so journal recovery can use them when it attempts to recover the statfs info. We lookup all the local statfs inodes and store them in a linked list to allow a node to recover statfs info for other nodes in the cluster. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23Merge tag 'nvme-5.10-2020-10-23' of git://git.infradead.org/nvme into block-5.10Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for 5.10 - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" * tag 'nvme-5.10-2020-10-23' of git://git.infradead.org/nvme: nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected
2020-10-23mmc: sdhci-of-esdhc: set timeout to max before tuningMichael Walle
On rare occations there is the following error: mmc0: Tuning timeout, falling back to fixed sampling clock There are SD cards which takes a significant longer time to reply to the first CMD19 command. The eSDHC takes the data timeout value into account during the tuning period. The SDHCI core doesn't explicitly set this timeout for the tuning procedure. Thus on the slow cards, there might be a spurious "Buffer Read Ready" interrupt, which in turn triggers a wrong sequence of events. In the end this will lead to an unsuccessful tuning procedure and to the above error. To workaround this, set the timeout to the maximum value (which is the best we can do) and the SDHCI core will take care of the proper timeout handling. Fixes: ba49cbd0936e ("mmc: sdhci-of-esdhc: add tuning support") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201022222337.19857-1-michael@walle.cc Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-23nvme-fc: shorten reconnect delay if possible for FCJames Smart
We've had several complaints about a 10s reconnect delay (the default) when there was an error while there is connectivity to a subsystem. The max_reconnects and reconnect_delay are set in common code prior to calling the transport to create the controller. This change checks if the default reconnect delay is being used, and if so, it adjusts it to a shorter period (2s) for the nvme-fc transport. It does so by calculating the controller loss tmo window, changing the value of the reconnect delay, and then recalculating the maximum number of reconnect attempts allowed. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: wait for queues to freeze before calling update_hr_hw_queuesJames Smart
On reconnect, the code currently does not freeze the controller before possibly updating the number hw queues for the controller. Add the freeze before updating the number of hw queues. Note: the queues are already started and remain started through the reconnect. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: fix error loop in create_hw_io_queuesJames Smart
The loop that backs out of hw io queue creation continues through index 0, which corresponds to the admin queue as well. Fix the loop so it only proceeds through indexes 1..n which correspond to I/O queues. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23nvme-fc: fix io timeout to abort I/OJames Smart
Currently, an I/O timeout unconditionally invokes nvme_fc_error_recovery() which checks for LIVE or CONNECTING state. If live, the routine resets the controller which initiates a reconnect - which is valid. If CONNECTING, err_work is scheduled. Err_work then calls the terminate_io routine, which also checks for CONNECTING and noops any further action on outstanding I/O. The result is nothing happened to the timed out io. As such, if the command was dropped on the wire, it will never timeout / complete, and the connect process will hang. Change the behavior of the io timeout routine to unconditionally abort the I/O. I/O completion handling will note that an io failed due to an abort and will terminate the connection / association as needed. If the abort was unable to happen, continue with a call to nvme_fc_error_recovery(). To ensure something different happens in nvme_fc_error_recovery() rework it so at it will abort all I/Os on the association to force a failure. As I/O aborts now may occur outside of delete_association, counting for completion must be wary and only count those aborted during delete_association when TERMIO is set on the controller. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-23Documentation: add xen.fifo_events kernel parameter descriptionJuergen Gross
The kernel boot parameter xen.fifo_events isn't listed in Documentation/admin-guide/kernel-parameters.txt. Add it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-6-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23xen/events: unmask a fifo event channel only if it was maskedJuergen Gross
Unmasking an event channel with fifo events channels being used can require a hypercall to be made, so try to avoid that by checking whether the event channel was really masked. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-5-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23xen/events: only register debug interrupt for 2-level eventsJuergen Gross
xen_debug_interrupt() is specific to 2-level event handling. So don't register it with fifo event handling being active. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23xen/events: make struct irq_info private to events_base.cJuergen Gross
The struct irq_info of Xen's event handling is used only for two evtchn_ops functions outside of events_base.c. Those two functions can easily be switched to avoid that usage. This allows to make struct irq_info and its related access functions private to events_base.c. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-3-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23xen: remove no longer used functionsJuergen Gross
With the switch to the lateeoi model for interdomain event channels some functions are no longer in use. Remove them. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-2-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23dma-mapping: document dma_{alloc,free}_pagesChristoph Hellwig
Document the new dma_alloc_pages and dma_free_pages APIs, and fix up the documentation for dma_alloc_noncoherent and dma_free_noncoherent. Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-10-23dt-binding: display: Require two resets on mantix panelGuido Günther
We need to reset both for the panel to show an image. Fixes: b9ab1248d801 ("dt-bindings: Add Mantix MLAF057WE51-X panel bindings") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/15d3dc7eb4e031f380be1298ed3ac9085626f26b.1602584953.git.agx@sigxcpu.org
2020-10-23drm/panel: mantix: Fix panel resetGuido Günther
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-23drm/panel: mantix: Don't dereference NULL modeGuido Günther
Don't dereference mode which was just NULL checked. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-10-23kvm: x86/mmu: NX largepage recovery for TDP MMUBen Gardon
When KVM maps a largepage backed region at a lower level in order to make it executable (i.e. NX large page shattering), it reduces the TLB performance of that region. In order to avoid making this degradation permanent, KVM must periodically reclaim shattered NX largepages by zapping them and allowing them to be rebuilt in the page fault handler. With this patch, the TDP MMU does not respect KVM's rate limiting on reclaim. It traverses the entire TDP structure every time. This will be addressed in a future patch. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Don't clear write flooding count for direct rootsBen Gardon
Direct roots don't have a write flooding count because the guest can't affect that paging structure. Thus there's no need to clear the write flooding count on a fast CR3 switch for direct roots. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-20-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support MMIO in the TDP MMUBen Gardon
In order to support MMIO, KVM must be able to walk the TDP paging structures to find mappings for a given GFN. Support this walk for the TDP MMU. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 v2: Thanks to Dan Carpenter and kernel test robot for finding that root was used uninitialized in get_mmio_spte. Signed-off-by: Ben Gardon <bgardon@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20201014182700.2888246-19-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support write protection for nesting in tdp MMUBen Gardon
To support nested virtualization, KVM will sometimes need to write protect pages which are part of a shadowed paging structure or are not writable in the shadowed paging structure. Add a function to write protect GFN mappings for this purpose. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-18-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support disabling dirty logging for the tdp MMUBen Gardon
Dirty logging ultimately breaks down MMU mappings to 4k granularity. When dirty logging is no longer needed, these granaular mappings represent a useless performance penalty. When dirty logging is disabled, search the paging structure for mappings that could be re-constituted into a large page mapping. Zap those mappings so that they can be faulted in again at a higher mapping level. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-17-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support dirty logging for the TDP MMUBen Gardon
Dirty logging is a key feature of the KVM MMU and must be supported by the TDP MMU. Add support for both the write protection and PML dirty logging modes. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-16-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support changed pte notifier in tdp MMUBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add a hook and handle the change_pte MMU notifier. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-15-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add access tracking for tdp_mmuBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. The main Linux MM uses the access tracking MMU notifiers for swap and other features. Add hooks to handle the test/flush HVA (range) family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-14-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMUBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add hooks to handle the invalidate range family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-13-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMUBen Gardon
Attach struct kvm_mmu_pages to every page in the TDP MMU to track metadata, facilitate NX reclaim, and enable inproved parallelism of MMU operations in future patches. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-12-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add TDP MMU PF handlerBen Gardon
Add functions to handle page faults in the TDP MMU. These page faults are currently handled in much the same way as the x86 shadow paging based MMU, however the ordering of some operations is slightly different. Future patches will add eager NX splitting, a fast page fault handler, and parallel page faults. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23Merge tag 'drm-intel-next-fixes-2020-10-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Tweak initia DPCD backlight.enabled value (Sean) - Initialize reserved MOCS indices (Ayaz) - Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville) - Support parsing of oversize batches (Chris) - Delay execlists processing for TGL (Chris) - Use the active reference on the vma during error capture (Chris) - Widen CSB pointer (Chris) - Wait for CSB entries on TGL (Chris) - Fix unwind for scratch page allocation (Chris) - Exclude low patches of stolen memory (Chris) - Force VT'd workarounds when running as a guest OS (Chris) - Drop runtime-pm assert from vpgu io accessors (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
2020-10-23Merge tag 'amd-drm-fixes-5.10-2020-10-21' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.10-2020-10-21: amdgpu: - Sienna Cichlid fixes - MST manager resource leak fix - GPU reset fix amdkfd: - Luxmark fix for Navi1x Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022040322.4183-1-alexander.deucher@amd.com
2020-10-22docs: Add two missing entries in vm sysctl indexFam Zheng
Both seem overlooked while adding the section in the main content. Signed-off-by: Fam Zheng <famzheng@amazon.com> Link: https://lore.kernel.org/r/20201022065403.3936070-1-fam@euphon.net Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-22docs/vm: trivial fixes to several spelling mistakesColin Ian King
Fix several spelling mistakes in vm documentation. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201022142653.254429-1-colin.king@canonical.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-22hil/parisc: Disable HIL driver when it gets stuckHelge Deller
When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2020-10-22parisc: Improve error return codes when setting rtc timeHelge Deller
The HP 730 machine returned strange errors when I tried setting the rtc time. Add some debug code to improve the possibility to trace errors and document that hppa probably has as Y2k38 problem. Signed-off-by: Helge Deller <deller@gmx.de>
2020-10-22Merge tag 'kconfig-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - Remove unused or useless code from qconf - Allow to edit "int", "hex", "string" options in place, and remove the separate edit box from qconf * tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: create QApplication after option checks kconfig: qconf: remove Y, M, N columns kconfig: qconf: remove ConfigView class kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView kconfig: qconf: remove ConfigLineEdit class kconfig: qconf: allow to edit "int", "hex", "string" menus in-place kconfig: qconf: show data column all the time kconfig: qconf: move ConfigView::updateList(All) to ConfigList class kconfig: qconf: remove unused ConfigItem::okRename() kconfig: qconf: update the intro message to match to the current code kconfig: qconf: reformat the intro message
2020-10-22splice: change exported internal do_splice() helper to take kernel offsetJens Axboe
With the set_fs change, we can no longer rely on copy_{to,from}_user() accepting a kernel pointer, and it was bad form to do so anyway. Clean this up and change the internal helper that io_uring uses to deal with kernel pointers instead. This puts the offset copy in/out in __do_splice() instead, which just calls the same helper. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-22io_uring: make loop_rw_iter() use original user supplied pointersJens Axboe
We jump through a hoop for fixed buffers, where we first map these to a bvec(), then kmap() the bvec to obtain the pointer we copy to/from. This was always a bit ugly, and with the set_fs changes, it ends up being practically problematic as well. There's no need to jump through these hoops, just use the original user pointers and length for the non iter based read/write. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-22Merge tag 'modules-for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Code cleanups: more informative error messages and statically initialize init_free_wq to avoid a workqueue warning" * tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: statically initialize init section freeing data module: Add more error message for failed kernel module loading
2020-10-22Merge tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - New fsl-mc vfio bus driver supporting userspace drivers of objects within NXP's DPAA2 architecture (Diana Craciun) - Support for exposing zPCI information on s390 (Matthew Rosato) - Fixes for "detached" VFs on s390 (Matthew Rosato) - Fixes for pin-pages and dma-rw accesses (Yan Zhao) - Cleanups and optimize vconfig regen (Zenghui Yu) - Fix duplicate irq-bypass token registration (Alex Williamson) * tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages vfio/pci: Clear token on bypass registration failure vfio/fsl-mc: fix the return of the uninitialized variable ret vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit MAINTAINERS: Add entry for s390 vfio-pci vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO vfio/fsl-mc: Add support for device reset vfio/fsl-mc: Add read/write support for fsl-mc devices vfio/fsl-mc: trigger an interrupt via eventfd vfio/fsl-mc: Add irq infrastructure for fsl-mc devices vfio/fsl-mc: Added lock support in preparation for interrupt handling vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO s390/pci: track whether util_str is valid in the zpci_dev s390/pci: stash version in the zpci_dev vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices ...
2020-10-22Merge tag 'rpmsg-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This introduces rpmsg_char support for GLINK and fixes a few issues" * tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: glink: Expose rpmsg name attr for glink rpmsg: glink: Add support for rpmsg glink chrdev rpmsg: Guard against null endpoint ops in destroy rpmsg: glink: Use complete_all for open states rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description rpmsg: Avoid double-free in mtk_rpmsg_register_device rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
2020-10-22Merge tag 'rproc-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
generated by cgit (git 2.34.1) at 2025-09-13 04:03:52 +0000