summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-12ASoC: omap-mcbsp: Single function CLKR/FSR source mux configurationPeter Ujfalusi
Use single function for the CLKR/FSR mux configuration. OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4 McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is not correct name for all support OMAP versions Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC headerPeter Ujfalusi
Clock signal muxing, and functional clock related defines are only needed in ASoC drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configurationPeter Ujfalusi
On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4. Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that we add the correct callback for the correct port across supported OMAP versions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap McBSP: Clear rx_irq at probe time for OMAP4Peter Ujfalusi
On OMAP4 we have one interrupt line per McBSP port. At probe time tx, and rx irq value will be -ENXIO, and only the tx irq will get corrected. In omap_mcbsp_request if the rx_irq is not 0 we proceed, and try to request the interrupt, which will fail on OMAP4 (rx_irq == -6). To avoid this error, clear the rx_irq at probe time on OMAP4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: When closing the port select PRCM source for CLKS signalPeter Ujfalusi
If external source for the CLKS signal selection kept after the port is no longer in use the system might refuse to go suspend. There is also a chance that the external clock is not running when next time the McBSP port is started which can result errors when we try to access McBSP registers. Reset the CLKS source back to PRCM source unconditionally. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Configure wakeup in later phasePeter Ujfalusi
Configure the WAKEUPEN register at the same time we configure the rest of the McBSP registers. In case of OMAP3+, if the sysclock has been reconfigured we are going to disable McBSP for the duration of the clock change, which will reset the McBSP registers. The WAKEUPEN register need to be configured later, so the changes will be effective during runtime. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicrocom> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Remove redundant checks for the st_data pointerPeter Ujfalusi
The parent functions of omap_st_start/stop also checks the validity of the st_data pointer so we do not need to do it again inside of omap_st_start/stop Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Use uniform st_data pointer initializationPeter Ujfalusi
In this way we can save few lines, and have uniform way of initializing the st_data in all functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Simplify DMA configurationPeter Ujfalusi
Configure the DMA request line, port address, and stream name at probe time instead of every time we start a stream. These settings are static in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structurePeter Ujfalusi
Since the drivers has been merged, merge the two structures together. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Cleanup of module probe/remove codePeter Ujfalusi
Use devm_* where it is possible to save on cleanup path. Start merging the two mcbsp file content. Move pm_runtime_enable/disable calls to ASoC probe, remove from module probe/remove time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP McBSP: Remove redundant accessorsPeter Ujfalusi
We no longer need accessor functions for max_tx/rx_threshold, dma_op_mode or for the FIFO size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: mcbsp.h: Clean up bit definitionsPeter Ujfalusi
Use BIT() for bit position, correct field definition by adding mask to them, and also adding the missing spaces around '<<' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: Do not register omap-mcbsp-dai devicePeter Ujfalusi
The driver for omap-mcbsp-dai no longer exist since it has been merged with the omap-mcbsp driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Create a single driver for McBSPPeter Ujfalusi
The OMAP McBSP driver stack used to contain two different drivers. One of them was used as kind low-level access to the IP, while the other driver was the ASoC DAI driver. There were global, shared structures, in different places, the McBSP instances are reffered with id numbers (sometimes 0 based, in other cases 1 based id numbers). Create one single driver for OMAP McBSP with name: omap-mcbsp. Convert the old omap-mcbsp driver initially to be a library for the omap-mcbsp DAI driver. With this change we can get rid of all global variables, structures. Further cleanup is coming... Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: McBSP: Consolidate plat/mcbsp.h contentPeter Ujfalusi
Move most of the content of the plat/mcbsp.h header file under sound/soc/omap/ to help further cleanups. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12OMAP: mcbsp: Move core driver under sound/soc/omapPeter Ujfalusi
In order to consolidate the McBSP driver move it out from arch/arm/plat-omap directory under sound/soc/omap/ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: mcbsp: Convert core driver to proper platform driverPeter Ujfalusi
Convert the plat-omap/mcbsp.c driver to be proper platform driver. Remove the omap_mcbsp_init function call which was called from mach-omap1/2/mcbsp.c to register the platform driver for the just created platform device in the same function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12OMAP4: panda: Correct cpu version check for 4430Peter Ujfalusi
The cpu_is_omap4430() macro always return with 0. Use the correct cpu_is_omap443x() to check for Panda revision. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ALSA: Add a hook capability to vmaster controlsTakashi Iwai
This patch adds a hook to vmaster control to be called at each time when the master value is changed. It'd be handy for an additional mute LED control following the Master switch, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ASoC: Revert widget I/O locking for 3.4Mark Brown
The widget locking depends on some of the other locking changes which are queued up for 3.5 not 3.4 so revert the locking changes and reapply them in 3.5. This reverts commit 66bf93212f19548f5ed221356b2d70189cc18254 and 96acc357bedad69fbc94d1b923a960af5a411c6f. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-09ALSA: hda - Initialize vmaster slave volumesTakashi Iwai
When the driver is changed to use vmaster or a new slave element is added by the improvement of the parser code, user may face often the silent output because of the muted slave mixer although Master volume is properly set. And they complain. And I get upset. Although such a mixer element should be initialized via "alsactl init", it'd be more user-friendly if the known output slaves are unmuted and set to 0dB so that user can control the volume only with Master as default. Since Master is still set muted as default even with this change, no risk of the speaker blow up, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-09ALSA: core - Refactor card id string creation codeTakashi Iwai
The code to handle the card id string is fairly messy, so here is a tidy up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-09ASoC: da7210: Remove extra registers from defaults listAshish Chavan
This patch removes following registers from reg map defaults, - Registers which are currently not used by driver - Non existing registers - Volatile registers Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-09ASoC: fsl: check property 'compatible' for the machine nameShawn Guo
Check /compatible rather than /model to determine the machine name. The p1022ds older device trees get a different /model from the new ones, while /compatible is consistent there, so checking /compatible will save the bother of detecting older p1022ds device trees. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: wm8996: Remove separate output stage enable stepMark Brown
Marginally improve performance during startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: wm8996: Remove some volatile regisers from the defaults tableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: core: missing set_fmt should not be complaintShawn Guo
Not having a DAI link set_fmt operation is perfectly normal and should not be complaint. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: da7210: Update for using I2C regmapAshish Chavan
Current DA7210 driver has I2C support using older register cache methods. This patch updates it for latest regmap framework. This has been tested on DA7210 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ASoC: add more sample rate for pxa-sspQiao Zhou
add more sample rate for pxa-ssp, which are supported, such as 32KHz, 64KHz. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-08ALSA: hdspm - Provide ioctl_compatAdrian Knoth
snd_hdspm uses its own ioctls to acquire config- and status information. Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07ASoC: imx: imx-audmux: Fix section mismatchFabio Estevam
Fix the following section mismatch warning: WARNING: vmlinux.o(.data+0x35be8): Section mismatch in reference from the variable imx_audmux_driver to the function .init.text:imx_audmux_probe() The variable imx_audmux_driver references the function __init imx_audmux_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-07ASoC: dapm: Only lock CODEC for I/O if not using regmapMark Brown
If we do use regmap then regmap will take care of things for us. We actually already have this check at a higher level for the current users but this makes sure we do the right thing in the future too if we need to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-07ALSA: hda - Set codec to D3 forcibly even if not usedTakashi Iwai
We've seen a problem with a pop-noise at suspend/resume on a HP machine with ALC269, and it turned out to be an issue that the controller going to D3 while the codec is unused. When the device is once suspended and resumed and kept unused, the driver doesn't initialize the codecs. Instead, the codec chips are set up dynamically at the first usage. Now, suppose the device going to suspend again before the codec is set up. The controller is turned off to D3 while the codec chips are untouched. This caused a pop noise because the codec chip might have been turned on implicitly by the hardware. As a workaround, the codec chip needs to be set to D3 when going to suspend no matter whether it was used or not. Also, for making it happening, the controller has to be always set up in the resume path. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07ALSA: hda/realtek - Reuse init_hook for ALC269VB coef setupTakashi Iwai
Move the currently unused spec->init_hook at the beginning of the init sequence so that the recently added ALC269VB coef setup can be put there. The alc_init() is again clean without an ugly check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-07Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c
2012-03-07ALSA: hda/realtek - Apply the coef-setup only to ALC269VBKailang Yang
The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-06ASoC: DAPM: Make sure DAPM widget IO ops hold the component mutexLiam Girdwood
Currently not all DAPM widget IO ops are holding their component mutex (codec or platform). Make sure this is now held for DAPM widget IO operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: core: Add platform component mutexLiam Girdwood
Add mutex support for platform IO operations. e.g. can be used for platform DAPM widget IO ops. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: tegra: Remove unused variableStephen Warren
Fixes the following warning: sound/soc/tegra/tegra_alc5632.c: In function 'tegra_alc5632_asoc_init': sound/soc/tegra/tegra_alc5632.c:118:6: warning: unused variable 'ret' [-Wunused-variable] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: dapm: Use dev_warn for debugfs warning messageLiam Girdwood
Remove printk(KERN_WARNING) and use dev_warn() instead. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06Merge tag 'asoc-3.4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc A few more ASoC updates, the main one is the move of the audmux driver from arch/arm into sound/soc. There's also some general driver specific tweaks and fixes.
2012-03-06ALSA: hda - Add Gigabyte GA-MA790X to the beep whitelistTakashi Iwai
Its BIOS suppresses the PC beep although it's implemented. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-06ASoC: fsl: add dt support for imx-audmuxRichard Zhao
It adds device tree probe support for imx-audmux driver. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: Add missing regmap_init_i2c in wm8804_i2c_probeAxel Lin
commit 891271c "ASoC: Convert wm8804 to direct regmap API usage" only converts wm8804_spi_probe to use regmap_init_spi. This patch adds missing regmap_init_i2c in wm8804_i2c_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3Marton Balint
My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c. Raymond helped me to add the necessary pin fixup to make it appear again. In fact, this is basically his patch. It fixes alsa bug #5541. Signed-off-by: Marton Balint <cus@passwd.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-06ASoC: wm8962: Remove defaults for volatile registersMark Brown
Save a little RAM. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: wm8962: Remove unneeded pm_runtime_set_active()Mark Brown
The default pm_runtime status is enabled which is what we want. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: wm8994: Use audio mode for jack detection when system is activeMark Brown
When we are out of system sleep always use audio mode for jack detection in order to avoid potential performance issues handing off between modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: imx: add an explicit Kconfig option for imx-ssi driverShawn Guo
Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi driver, and it works because all the machine driver covered by the menuconfig need to build imx-ssi driver in. However, it will not work any more if we have a imx based machine driver going into the menuconfig while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than imx-ssi one. The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi driver, so that it can be selected independently from the menuconfig option SND_IMX_SOC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-11 21:03:53 +0000