summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-17wifi: rtw89: coex: Update function to get BT RSSI and hardware counterChing-Te Ku
Correct Bluetooth RSSI count method. The 6dB is the gap between hardware packet sampled value and real RSSI value. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-4-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Add path control register to monitor listChing-Te Ku
Chips use similar hardware for path control, but could different path/antenna configuration. Add these register to monitor, if there are wrong settings, these register can help to debug. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-3-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Enable Wi-Fi RX gain control for free run solutionChing-Te Ku
When Wi-Fi & Bluetooth are both busy at the same time, Wi-Fi need to enable RX gain to protect Wi-Fi RX RF ability. Without this configure the interference from Bluetooth will bring a big impact to Wi-Fi RX. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-2-pkshih@realtek.com
2023-04-17wifi: rtw89: fix power save function in WoWLAN modeChih-Kang Chang
In WoWLAN Mode, it's expected that WiFi chip could enter power save mode only after all setting is finished, but current wow_enter_lps function break the rule and may lead to WoWLAN function fail in low probability, so fix it. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-2-pkshih@realtek.com
2023-04-17wifi: rtw89: support WoWLAN mode for 8852beChin-Yen Lee
To support WoWLAN mode for 8852be, we add one PLE quota setting and WoWLAN stub, which shows that supported WLAN events include receiving magic packet, rekey packet and deauth packet, and disconnecting from AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-1-pkshih@realtek.com
2023-04-17net/sched: clear actions pointer in miss cookie init failPedro Tammela
Palash reports a UAF when using a modified version of syzkaller[1]. When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()' a call to 'tcf_exts_destroy()' is made to free up the tcf_exts resources. In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made; Then calling 'tcf_exts_destroy()', which triggers an UAF since the already freed tcf_exts action pointer is lingering in the struct. Before the offending patch, this was not an issue since there was no case where the tcf_exts action pointer could linger. Therefore, restore the old semantic by clearing the action pointer in case of a failure to initialize the miss_cookie. [1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus v1->v2: Fix compilation on configs without tc actions (kernel test robot) Fixes: 80cd22c35c90 ("net/sched: cls_api: Support hardware miss to tc action") Reported-by: Palash Oswal <oswalpalash@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17net: lan966x: Fix lan966x_ifh_getHoratiu Vultur
From time to time, it was observed that the nanosecond part of the received timestamp, which is extracted from the IFH, it was actually bigger than 1 second. So then when actually calculating the full received timestamp, based on the nanosecond part from IFH and the second part which is read from HW, it was actually wrong. The issue seems to be inside the function lan966x_ifh_get, which extracts information from an IFH(which is an byte array) and returns the value in a u64. When extracting the timestamp value from the IFH, which starts at bit 192 and have the size of 32 bits, then if the most significant bit was set in the timestamp, then this bit was extended then the return value became 0xffffffff... . And the reason of this is because constants without any postfix are treated as signed longs and that is the reason why '1 << 31' becomes 0xffffffff80000000. This is fixed by adding the postfix 'ULL' to 1. Fixes: fd7627833ddf ("net: lan966x: Stop using packing library") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17wifi: iwlwifi: move debug buffer allocation failure to info verbosityGolan Ben Ami
This is noising the kernel log and customers asked to hush it down. We can live with this message in "info" verbosity. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.0a7f557aa2a0.If9db474b63242b1bfaed659aa174b678ae8dc196@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: make the loop for card preparation effectiveEmmanuel Grumbach
Since we didn't reset t to 0, only the first iteration of the loop did checked the ready bit several times. From the second iteration and on, we just tested the bit once and continued to the next iteration. Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452 Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: allow number of beacons from FWJohannes Berg
Newer firmware images have a TLV advertising how many beacons they support, use that to permit adding more links in AP mode (FW needs to support at least as many links as beacons). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: implement key link switchingJohannes Berg
Implement switching keys from one set of firmware station IDs to another set, during link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.c6a777dd5e47.I693f7fd7c52fe8b51a58af69d45488511367f49e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: implement BAID link switchingJohannes Berg
When we switch station links, also add the code to switch BAIDs from one station mask to the new one. To do so, refactor the switching code a bit to have common code for all the needed switches; will add keys next. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.40654afce24f.I0e35151f69e7513be53ddb8f008e9ab48278c352@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: track station mask for BAIDsJohannes Berg
When we have MLO connections, a BAID applies to multiple firmware stations. Track the station mask instead of the station ID, getting rid of a few more deflink cases and preparing for handling link switching for BAIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: bump FW API to 77 for AX devicesGregory Greenman
Start supporting API version 77 for AX devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.e522ccefe354.If7628363fafeb7687163103e734206915c445197@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: use correct sta mask to remove queueJohannes Berg
When we remove a queue we need to use the currently active firmware stations in the mask, not the deflink one. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.01cdd2153418.I176d54f2d869f51b3707d056adb96455cf885f93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: avoid iterating over an un-initialized listAvraham Stern
The initiator smooth list is initialized only in iwl_mvm_up(), but is cleared in iwl_mvm_mac_stop. This may result in iterating over the list before it was initialized in case iwl_mvm_up() failed early. Fix it by moving the list initialization to an earlier stage. Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.b50b1fe9a576.Ie348ffae110612d2e252ac120a3ba0aea063b1b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: factor out iwl_mvm_sta_fw_id_mask()Johannes Berg
We are going to need this in more places than just the key code, so factor out the functionality of getting the FW station ID mask (filtered to a specific link if needed) to a separate function that can now be called both under RCU and mvm->mutex protection. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.eff92b93025d.I2c50290a0537d5db3d3460f4d57c78a4712ffb75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: properly implement HE AP supportJohannes Berg
The firmware split the HE support field into HE and "pseudo HE", the latter is really for AP and doesn't implement trigger frame handling for example. Use the new field for AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: Fix _iwl_mvm_get_scan_type()Ilan Peer
The usage of the 'dtim_period' value was wrong, as it is only a multiplier of the beacon interval, and thus, beacon interval should also be considered. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.e08293d6cace.I25f8cea3189472bd714676ca38b121d7c60fb9d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: fix getting lowest TX rate for MLOJohannes Berg
In iwl_mvm_mac_ctxt_get_lowest_rate() we were still accessing vif->bss_conf without any multi-link provisions, and also the info->band, both of which isn't valid in MLO. Fix the code to look at the correct link. In case of EAPOL transmissions for the initial 4-way-HS, look up the correct link here as well, and warn if multiple are active. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.d892f68d3bcd.I7d6927abeea5c3899db225391dbc6a5c77805e80@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: call napi_synchronize() before freeing rx/tx queuesGregory Greenman
When rx/tx queues are being freed, on a different CPU there could be still rx flow running. Call napi_synchronize() to prevent such a race. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: nvm-parse: add full BW UL MU-MIMO supportJohannes Berg
For some devices, in client mode, we support full bandwidth uplink multi-user MIMO. Add the necessary capability. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.88b6aac6c876.Ibf2a7a38d7a172c371c347c9d4441e8c656cefe3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17Merge branch 'sctp-info-dump'David S. Miller
Xin Long says: ==================== sctp: add some missing peer_capables in sctp info dump The 1st patch removes the unused and obsolete hostname_address from sctp_association peer and also the bit from sctp_info peer_capables, and then reuses its bit for reconf_capable and use the higher available bit for intl_capable in the 2nd patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17sctp: add intl_capable and reconf_capable in ss peer_capableXin Long
There are two new peer capables have been added since sctp_diag was introduced into SCTP. When dumping the peer capables, these two new peer capables should also be included. To not break the old capables, reconf_capable takes the old hostname_address bit, and intl_capable uses the higher available bit in sctpi_peer_capable. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17sctp: delete the obsolete code for the host name address paramXin Long
In the latest RFC9260, the Host Name Address param has been deprecated. For INIT chunk: Note 3: An INIT chunk MUST NOT contain the Host Name Address parameter. The receiver of an INIT chunk containing a Host Name Address parameter MUST send an ABORT chunk and MAY include an "Unresolvable Address" error cause. For Supported Address Types: The value indicating the Host Name Address parameter MUST NOT be used when sending this parameter and MUST be ignored when receiving this parameter. Currently Linux SCTP doesn't really support Host Name Address param, but only saves some flag and print debug info, which actually won't even be triggered due to the verification in sctp_verify_param(). This patch is to delete those dead code. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17Merge branch 'mptcp-cleanups'David S. Miller
Matthieu Baerts says: ==================== mptcp: various small cleanups Patch 1 makes a function static because it is only used in one file. Patch 2 adds info about the git trees we use to help occasional devs. Patch 3 removes an unused variable. Patch 4 removes duplicated entries from the help menu of a tool used in MPTCP selftests. Patch 5 removes some ShellCheck warnings in mptcp_join.sh selftest. Only very minor improvements then. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17selftests: mptcp: join: fix ShellCheck warningsMatthieu Baerts
Most of the code had an issue according to ShellCheck. That's mainly due to the fact it incorrectly believes most of the code was unreachable because it's invoked by variable name, see how the "tests" array is used. Once SC2317 has been ignored, three small warnings were still visible: - SC2155: Declare and assign separately to avoid masking return values. - SC2046: Quote this to prevent word splitting: can be ignored because "ip netns pids" can display more than one pid. - SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined. This probably didn't fix any actual issues but it might help spotting new interesting warnings reported by ShellCheck as just before, ShellCheck was reporting issues for most lines making it a bit useless. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17selftests: mptcp: remove duplicated entries in usageMatthieu Baerts
mptcp_connect tool was printing some duplicated entries when showing how to use it: -j -l -r While at it, I also: - moved the very few entries that were not sorted, - added -R that was missing since commit 8a4b910d005d ("mptcp: selftests: add rcvbuf set option"), - removed the -u parameter that has been removed in commit f730b65c9d85 ("selftests: mptcp: try to set mptcp ulp mode in different sk states"). No need to backport this, it is just an internal tool used by our selftests. The help menu is mainly useful for MPTCP kernel devs. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: remove unused 'remaining' variableMatthieu Baerts
In some functions, 'remaining' variable was given in argument and/or set but never read. net/mptcp/options.c:779:3: warning: Value stored to 'remaining' is never read [clang-analyzer-deadcode.DeadStores]. net/mptcp/options.c:547:3: warning: Value stored to 'remaining' is never read [clang-analyzer-deadcode.DeadStores]. The issue has been reported internally by Alibaba CI. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Suggested-by: Mat Martineau <martineau@kernel.org> Co-developed-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17MAINTAINERS: add git trees for MPTCPMatthieu Baerts
This will help occasional developers to find our git repo without having to look at our wiki. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: make userspace_pm_append_new_local_addr staticGeliang Tang
mptcp_userspace_pm_append_new_local_addr() has always exclusively been used in pm_userspace.c since its introduction in commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs"). So make it static. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17sfc: Fix use-after-free due to selftest_workDing Hui
There is a use-after-free scenario that is: When the NIC is down, user set mac address or vlan tag to VF, the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop() and efx_net_open(), since netif_running() is false, the port will not start and keep port_enabled false, but selftest_work is scheduled in efx_net_open(). If we remove the device before selftest_work run, the efx_stop_port() will not be called since the NIC is down, and then efx is freed, we will soon get a UAF in run_timer_softirq() like this: [ 1178.907941] ================================================================== [ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90 [ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0 [ 1178.907950] [ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022 [ 1178.907955] Call Trace: [ 1178.907956] <IRQ> [ 1178.907960] dump_stack+0x71/0xab [ 1178.907963] print_address_description+0x6b/0x290 [ 1178.907965] ? run_timer_softirq+0xdea/0xe90 [ 1178.907967] kasan_report+0x14a/0x2b0 [ 1178.907968] run_timer_softirq+0xdea/0xe90 [ 1178.907971] ? init_timer_key+0x170/0x170 [ 1178.907973] ? hrtimer_cancel+0x20/0x20 [ 1178.907976] ? sched_clock+0x5/0x10 [ 1178.907978] ? sched_clock_cpu+0x18/0x170 [ 1178.907981] __do_softirq+0x1c8/0x5fa [ 1178.907985] irq_exit+0x213/0x240 [ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330 [ 1178.907989] apic_timer_interrupt+0xf/0x20 [ 1178.907990] </IRQ> [ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370 If the NIC is not actually brought up, there is no need to schedule selftest_work, so let's move invoking efx_selftest_async_start() into efx_start_all(), and it will be canceled by broughting down. Fixes: dd40781e3a4e ("sfc: Run event/IRQ self-test asynchronously when interface is brought up") Fixes: e340be923012 ("sfc: add ndo_set_vf_mac() function for EF10") Debugged-by: Huang Cun <huangcun@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Suggested-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17Merge branch 'mptcp-subflow-init'David S. Miller
Matthieu Baerts says: ==================== mptcp: refactor first subflow init This series refactors the initialisation of the first subflow of a listen socket. The first subflow allocation is no longer done at the initialisation of the socket but later, when the connection request is received or when requested by the userspace. This is needed not just because Paolo likes to refactor things but because this simplifies the code and makes the behaviour more consistent with the rest. Also, this is a prerequisite for future patches adding proper support of SELinux/LSM labels with MPTCP and accept(2). In [1], Ondrej Mosnacek explained they discovered the (userspace-facing) sockets returned by accept(2) when using MPTCP always end up with the label representing the kernel (typically system_u:system_r:kernel_t:s0), while it would make more sense to inherit the context from the parent socket (the one that is passed to accept(2)). Before being able to properly support that on SELinux/LSM side, patches 2-3/5 prepare the code to simplify the patch 4/5 moving the allocation. Patch 1/5 is a small clean-up seen while working on the series and patch 5/5 is a small improvement when closing unaccepted sockets. [1] https://lore.kernel.org/netdev/CAFqZXNs2LF-OoQBUiiSEyranJUXkPLcCfBkMkwFeM6qEwMKCTw@mail.gmail.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: fastclose msk when cleaning unaccepted socketsPaolo Abeni
When cleaning up unaccepted mptcp socket still laying inside the listener queue at listener close time, such sockets will go through a regular close, waiting for a timeout before shutting down the subflows. There is no need to keep the kernel resources in use for such a possibly long time: short-circuit to fast-close. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: move first subflow allocation at mpc access timePaolo Abeni
In the long run this will simplify the mptcp code and will allow for more consistent behavior. Move the first subflow allocation out of the sock->init ops into the __mptcp_nmpc_socket() helper. Since the first subflow creation can now happen after the first setsockopt() we additionally need to invoke mptcp_sockopt_sync() on it. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: move fastopen subflow check inside mptcp_sendmsg_fastopen()Paolo Abeni
So that we can avoid a bunch of check in fastpath. Additionally we can specialize such check according to the specific fastopen method - defer_connect vs MSG_FASTOPEN. The latter bits will simplify the next patches. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: avoid unneeded __mptcp_nmpc_socket() usagePaolo Abeni
In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper multiple times under the same socket lock scope. Additionally, in such places, the socket status ensures that there is no MP capable handshake running. Under the above condition we can replace the later __mptcp_nmpc_socket() helper invocation with direct access to the msk->subflow pointer and better document such access is not supposed to fail with WARN(). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17mptcp: drop unneeded argumentPaolo Abeni
After commit 3a236aef280e ("mptcp: refactor passive socket initialization"), every mptcp_pm_fully_established() call is always invoked with a GFP_ATOMIC argument. We can then drop it. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17Merge tag 'mlx5-updates-2023-04-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2023-04-14 Yevgeny Kliteynik Says: ======================= SW Steering: Support pattern/args modify_header actions The following patch series adds support for a new pattern/arguments type of modify_header actions. Starting with ConnectX-6 DX, we use a new design of modify_header FW object. The current modify_header object allows for having only limited number of these FW objects, which means that we are limited in the number of offloaded flows that require modify_header action. The new approach comprises of two types of objects: pattern and argument. Pattern holds header modification templates, later used with corresponding argument object to create complete header modification actions. The pattern indicates which headers are modified, while the arguments provide the specific values. Therefore a single pattern can be used with different arguments in different flows, enabling offloading of large number of modify_header flows. - Patch 1, 2: Add ICM pool for modify-header-pattern objects and implement patterns cache, allowing patterns reuse for different flows - Patch 3: Allow for chunk allocation separately for STEv0 and STEv1 - Patch 4: Read related device capabilities - Patch 5: Add create/destroy functions for the new general object type - Patch 6: Add support for writing modify header argument to ICM - Patch 7, 8: Some required fixes to support pattern/arg - separate read buffer from the write buffer and fix QP continuous allocation - Patch 9: Add pool for modify header arg objects - Patch 10, 11, 12: Implement MODIFY_HEADER and TNL_L3_TO_L2 actions with the new patterns/args design - Patch 13: Optimization - set modify header action of size 1 directly on the STE instead of separate pattern/args combination - Patch 14: Adjust debug dump for patterns/args - Patch 15: Enable patterns and arguments for supporting devices =======================
2023-04-17Merge branch 'ovs-selftests'David S. Miller
Aaron Conole says: ==================== selftests: openvswitch: add support for testing upcall interface The existing selftest suite for openvswitch will work for regression testing the datapath feature bits, but won't test things like adding interfaces, or the upcall interface. Here, we add some additional test facilities. First, extend the ovs-dpctl.py python module to support the OVS_FLOW and OVS_PACKET netlink families, with some associated messages. These can be extended over time, but the initial support is for more well known cases (output, userspace, and CT). Next, extend the test suite to test upcalls by adding a datapath, monitoring the upcall socket associated with the datapath, and then dumping any upcalls that are received. Compare with expected ARP upcall via arping. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17selftests: openvswitch: add support for upcall testingAaron Conole
The upcall socket interface can be exercised now to make sure that future feature adjustments to the field can maintain backwards compatibility. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17selftests: openvswitch: add flow dump supportAaron Conole
Add a basic set of fields to print in a 'dpflow' format. This will be used by future commits to check for flow fields after parsing, as well as verifying the flow fields pushed into the kernel from userspace. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17selftests: openvswitch: add interface supportAaron Conole
Includes an associated test to generate netns and connect interfaces, with the option to include packet tracing. This will be used in the future when flow support is added for additional test cases. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17net: phy: micrel: Fix PTP_PF_PEROUT for lan8841Horatiu Vultur
If the 1PPS output was enabled and then lan8841 was configured to be a follower, then target clock which is used to generate the 1PPS was not configure correctly. The problem was that for each adjustments of the time, also the nanosecond part of the target clock was changed. Therefore the initial nanosecond part of the target clock was changed. The issue can be observed if both the leader and the follower are generating 1PPS and see that their PPS are not aligned even if the time is allined. The fix consists of not modifying the nanosecond part of the target clock when adjusting the time. In this way the 1PPS get also aligned. Fixes: e4ed8ba08e3f ("net: phy: micrel: Add support for PTP_PF_PEROUT for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17virtio_net: bugfix overflow inside xdp_linearize_page()Xuan Zhuo
Here we copy the data from the original buf to the new page. But we not check that it may be overflow. As long as the size received(including vnethdr) is greater than 3840 (PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow. And this is completely possible, as long as the MTU is large, such as 4096. In our test environment, this will cause crash. Since crash is caused by the written memory, it is meaningless, so I do not include it. Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-16Linux 6.3-rc7v6.3-rc7Linus Torvalds
2023-04-16Revert "userfaultfd: don't fail on unrecognized features"Peter Xu
This is a proposal to revert commit 914eedcb9ba0ff53c33808. I found this when writing a simple UFFDIO_API test to be the first unit test in this set. Two things breaks with the commit: - UFFDIO_API check was lost and missing. According to man page, the kernel should reject ioctl(UFFDIO_API) if uffdio_api.api != 0xaa. This check is needed if the api version will be extended in the future, or user app won't be able to identify which is a new kernel. - Feature flags checks were removed, which means UFFDIO_API with a feature that does not exist will also succeed. According to the man page, we should (and it makes sense) to reject ioctl(UFFDIO_API) if unknown features passed in. Link: https://lore.kernel.org/r/20220722201513.1624158-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230412163922.327282-2-peterx@redhat.com Fixes: 914eedcb9ba0 ("userfaultfd: don't fail on unrecognized features") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Zach O'Keefe <zokeefe@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-16writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbsBaokun Li
KASAN report null-ptr-deref: ================================================================== BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0 Write of size 8 at addr 0000000000000000 by task sync/943 CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461 Call Trace: <TASK> dump_stack_lvl+0x7f/0xc0 print_report+0x2ba/0x340 kasan_report+0xc4/0x120 kasan_check_range+0x1b7/0x2e0 __kasan_check_write+0x24/0x40 bdi_split_work_to_wbs+0x5c5/0x7b0 sync_inodes_sb+0x195/0x630 sync_inodes_one_sb+0x3a/0x50 iterate_supers+0x106/0x1b0 ksys_sync+0x98/0x160 [...] ================================================================== The race that causes the above issue is as follows: cpu1 cpu2 -------------------------|------------------------- inode_switch_wbs INIT_WORK(&isw->work, inode_switch_wbs_work_fn) queue_rcu_work(isw_wq, &isw->work) // queue_work async inode_switch_wbs_work_fn wb_put_many(old_wb, nr_switched) percpu_ref_put_many ref->data->release(ref) cgwb_release queue_work(cgwb_release_wq, &wb->release_work) // queue_work async &wb->release_work cgwb_release_workfn ksys_sync iterate_supers sync_inodes_one_sb sync_inodes_sb bdi_split_work_to_wbs kmalloc(sizeof(*work), GFP_ATOMIC) // alloc memory failed percpu_ref_exit ref->data = NULL kfree(data) wb_get(wb) percpu_ref_get(&wb->refcnt) percpu_ref_get_many(ref, 1) atomic_long_add(nr, &ref->data->count) atomic64_add(i, v) // trigger null-ptr-deref bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all wbs. If the allocation of new work fails, the on-stack fallback will be used and the reference count of the current wb is increased afterwards. If cgroup writeback membership switches occur before getting the reference count and the current wb is released as old_wd, then calling wb_get() or wb_put() will trigger the null pointer dereference above. This issue was introduced in v4.3-rc7 (see fix tag1). Both sync_inodes_sb() and __writeback_inodes_sb_nr() calls to bdi_split_work_to_wbs() can trigger this issue. For scenarios called via sync_inodes_sb(), originally commit 7fc5854f8c6e ("writeback: synchronize sync(2) against cgroup writeback membership switches") reduced the possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io, thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(), and the issue becomes easily reproducible again. To solve this problem, percpu_ref_exit() is called under RCU protection to avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs(). Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(), and skip the current wb if wb_tryget() fails because the wb has already been shutdown. Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com Fixes: b817525a4a80 ("writeback: bdi_writeback iteration must not skip dying ones") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christian Brauner <brauner@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hou Tao <houtao1@huawei.com> Cc: yangerkun <yangerkun@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-16maple_tree: fix a potential memory leak, OOB access, or other unpredictable bugPeng Zhang
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the node_count field of the new node, but the node may not be a new node. It may be a node that existed before and node_count has a value, setting it to 0 will cause a memory leak. At this time, mas->alloc->total will be greater than the actual number of nodes in the linked list, which may cause many other errors. For example, out-of-bounds access in mas_pop_node(), and mas_pop_node() may return addresses that should not be used. Fix it by initializing node_count only for new nodes. Also, by the way, an if-else statement was removed to simplify the code. Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-16tools/mm/page_owner_sort.c: fix TGID output when cull=tg is usedSteve Chou
When using cull option with 'tg' flag, the fprintf is using pid instead of tgid. It should use tgid instead. Link: https://lkml.kernel.org/r/20230411034929.2071501-1-steve_chou@pesi.com.tw Fixes: 9c8a0a8e599f4a ("tools/vm/page_owner_sort.c: support for user-defined culling rules") Signed-off-by: Steve Chou <steve_chou@pesi.com.tw> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 13:20:33 +0000