summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-06mtd: powernv_flash: Use WARN_ON_ONCE() rather than BUG_ON()Cyril Bur
BUG_ON() should be reserved in situations where we can not longer guarantee the integrity of the system. In the case where powernv_flash_async_op() receives an impossible op, we can still guarantee the integrity of the system. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/opal: Fix EBUSY bug in acquiring tokensWilliam A. Kennington III
The current code checks the completion map to look for the first token that is complete. In some cases, a completion can come in but the token can still be on lease to the caller processing the completion. If this completed but unreleased token is the first token found in the bitmap by another tasks trying to acquire a token, then the __test_and_set_bit call will fail since the token will still be on lease. The acquisition will then fail with an EBUSY. This patch reorganizes the acquisition code to look at the opal_async_token_map for an unleased token. If the token has no lease it must have no outstanding completions so we should never see an EBUSY, unless we have leased out too many tokens. Since opal_async_get_token_inrerruptible is protected by a semaphore, we will practically never see EBUSY anymore. Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion") Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06x86/mm: Define _PAGE_TABLE using _KERNPG_TABLEBorislav Petkov
... so that the difference is obvious. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171103102028.20284-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06Merge branch 'x86/mm' into x86/asm, to pick up pending changesIngo Molnar
Concentrate x86 MM and asm related changes into a single super-topic, in preparation for larger changes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06crypto: chcr - Replace _manual_ swap with swap macroGustavo A. R. Silva
Make use of the swap macro and remove unnecessary variable temp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]Boris BREZILLON
struct platform_device_id should be NULL terminated to let the core detect where the last entry is. Fixes: 07c50a8be41a ("crypto: marvell - Add a platform_device_id table") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resumeJim Quigley
The patch for commit: 5c06273401f2eb7b290cadbae18ee00f8f65e893 Author: Amit Shah <amit.shah@redhat.com> Date: Sun Jul 27 07:34:01 2014 +0930 virtio: rng: delay hwrng_register() till driver is ready moved the call to hwrng_register() out of the probe routine into the scan routine. We need to call hwrng_register() after a suspend/restore cycle to re-register the device, but the scan function is not invoked for the restore. Add the call to hwrng_register() to virtio_restore(). Reviewed-by: Liam Merwick <Liam.Merwick@oracle.com> Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: atmel - remove empty functionsTudor-Dan Ambarus
Pointer members of an object with static storage duration, if not explicitly initialized, will be initialized to a NULL pointer. The crypto API checks if these pointers are not NULL before using them, therefore we can safely remove these empty functions. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: ecdh - remove empty exit()Tudor-Dan Ambarus
Pointer members of an object with static storage duration, if not explicitly initialized, will be initialized to a NULL pointer. The crypto API checks if this pointer is not NULL before using it, we are safe to remove the function. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06MAINTAINERS: update maintainer for qatSalvatore Benedetto
Removing myself as I'm not longer following QAT development. Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: caam - remove unused param of ctx_map_to_sec4_sg()Horia Geantă
ctx_map_to_sec4_sg() function, added in commit 045e36780f115 ("crypto: caam - ahash hmac support") has never used the "desc" parameter, so let's drop it. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: caam - remove unneeded edesc zeroizationHoria Geantă
Extended descriptor allocation has been changed by commit dde20ae9d6383 ("crypto: caam - Change kmalloc to kzalloc to avoid residual data") to provide zeroized memory, meaning we no longer have to sanitize its members - edesc->src_nents and edesc->dst_dma. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06powerpc/eeh: Stop using do_gettimeofday()Arnd Bergmann
This interface is inefficient and deprecated because of the y2038 overflow. ktime_get_seconds() is an appropriate replacement here, since it has sufficient granularity but is more efficient and uses monotonic time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next some more amd/ttm fixes. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Downgrade pr_err to pr_debug for memory allocation failures drm/ttm: Always and only destroy bo->ttm_resv in ttm_bo_release_list drm/amd/amdgpu: Enabling ACP clock in hw_init (v2) drm/amdgpu/virt: don't dereference undefined 'module' struct
2017-11-06cxl: Rework the implementation of cxl_stop_trace_psl9()Vaibhav Jain
Presently the PSL9 specific cxl_stop_trace_psl9() only stops the RX0 traces on the CXL adapter when a PSL error irq is triggered. The patch updates the function to stop all the traces arrays and move them to the FIN state. The implementation issues the mmio to TRACECFG register to stop the trace array iff it already not in FIN state. This prevents the issue of trace data being reset in case of multiple stop mmio issued for a single trace array. Also the patch does some refactoring of existing cxl_stop_trace_psl9() and cxl_stop_trace_psl8() functions by moving them to 'pci.c' from 'debugfs.c' file and marking them as static. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06bpf: take advantage of stack_depth tracking in powerpc JITSandipan Das
Take advantage of stack_depth tracking, originally introduced for x64, in powerpc JIT as well. Round up allocated stack by 16 bytes to make sure it stays aligned for functions called from JITed bpf program. Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/tm: Don't check for WARN in TM Bad Thing handlingMichael Ellerman
Currently when we take a TM Bad Thing program check exception, we search the bug table to see if the program check was generated by a WARN/WARN_ON etc. That makes no sense, the WARN macros use trap instructions, which should never generate a TM Bad Thing exception. If they ever did that would be a bug and we should oops. We do have some hand-coded bugs in tm.S, using EMIT_BUG_ENTRY, but those are all BUGs not WARNs, and they all use trap instructions anyway. Almost certainly this check was incorrectly copied from the REASON_TRAP handling in the same function. Remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-By: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/mm: Add a CONFIG option to choose if radix is used by defaultMichael Ellerman
Currently if the hardware supports the radix MMU we will use it, *unless* "disable_radix" is passed on the kernel command line. However some users would like the reverse semantics. ie. The kernel uses the hash MMU by default, unless radix is explicitly requested on the command line. So add a CONFIG option to choose whether we use radix by default or not, and expand the disable_radix command line option to allow "disable_radix=no" which *enables* radix. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64Michael Ellerman
CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64: Free up CPU_FTR_ICSWXMichael Ellerman
The last user of CPU_FTR_ICSWX was removed in commit 6ff4d3e96652 ("powerpc: Remove old unused icswx based coprocessor support"), so free the bit up for future use. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/mm/hash: Add pr_fmt() to hash_utils64.cAneesh Kumar K.V
Make the printks look a bit nicer by adding a prefix. Radix config now do radix-mmu: Page sizes from device-tree: radix-mmu: Page size shift = 12 AP=0x0 radix-mmu: Page size shift = 16 AP=0x5 radix-mmu: Page size shift = 21 AP=0x1 radix-mmu: Page size shift = 30 AP=0x2 This patch update hash config to do similar dmesg output. With the patch we have hash-mmu: Page sizes from device-tree: hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0 hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7 hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56 hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1 hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8 hash-mmu: base_shift=20: shift=20, sllp=0x0111, avpnm=0x00000000, tlbiel=0, penc=2 hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0 hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/ipic: Fix status get and status clearChristophe Leroy
IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR which is the mask register. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/powernv: Reserve a hole which appears after enabling IOVAlexey Kardashevskiy
In order to make generic IOV code work, the physical function IOV BAR should start from offset of the first VF. Since M64 segments share PE number space across PHB, and some PEs may be in use at the time when IOV is enabled, the existing code shifts the IOV BAR to the index of the first PE/VF. This creates a hole in IOMEM space which can be potentially taken by some other device. This reserves a temporary hole on a parent and releases it when IOV is disabled; the temporary resources are stored in pci_dn to avoid kmalloc/free. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/pseries/vio: Dispose of virq mapping on vdevice unregisterTyrel Datwyler
When a vdevice is DLPAR removed from the system the vio subsystem doesn't bother unmapping the virq from the irq_domain. As a result we have a virq mapped to a hardware irq that is no longer valid for the irq_domain. A side effect is that we are left with /proc/irq/<irq#> affinity entries, and attempts to modify the smp_affinity of the irq will fail. In the following observed example the kernel log is spammed by ics_rtas_set_affinity errors after the removal of a VSCSI adapter. This is a result of irqbalance trying to adjust the affinity every 10 seconds. rpadlpar_io: slot U8408.E8E.10A7ACV-V5-C25 removed ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 This patch fixes the issue by calling irq_dispose_mapping() on the virq of the viodev on unregister. Fixes: f2ab6219969f ("powerpc/pseries: Add PFO support to the VIO bus") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s/radix: Fix process table entry cache invalidationNicholas Piggin
According to the architecture, the process table entry cache must be flushed with tlbie RIC=2. Currently the process table entry is set to invalid right before the PID is returned to the allocator, with no invalidation. This works on existing implementations that are known to not cache the process table entry for any except the current PIDR. It is architecturally correct and cleaner to invalidate with RIC=2 after clearing the process table entry and before the PID is returned to the allocator. This can be done in arch_exit_mmap that runs before the final flush, and to ensure the final flush (fullmm) is always a RIC=2 variant. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s/radix: Improve preempt handling in TLB codeNicholas Piggin
Preempt should be consistently disabled for mm_is_thread_local tests, so bring the rest of these under preempt_disable(). Preempt does not need to be disabled for the mm->context.id tests, which allows simplification and removal of gotos. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/powernv: Use FIXUP_ENDIAN_HV in OPAL returnNicholas Piggin
Close the recoverability gap for OPAL calls by using FIXUP_ENDIAN_HV in the return path. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/book3s: Add an HV variant of FIXUP_ENDIAN that is recoverableNicholas Piggin
Add an HV variant of FIXUP_ENDIAN which uses HSRR[01] and does not clear MSR[RI], which improves recoverability. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/book3s: Use label for FIXUP_ENDIAN macro branchNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64: Fix latency tracing for lazy irq replayNicholas Piggin
When returning from an exception to a soft-enabled context, pending IRQs are replayed but IRQ tracing is not reset, so a number of them can get chained together into the same IRQ-disabled trace. Fix this by having __check_irq_replay re-set IRQ trace. This is conceptually where we respond to the next interrupt, so it fits the semantics of the IRQ tracer. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06KVM: PPC: Book3S HV: Handle host system reset in guest modeNicholas Piggin
If the host takes a system reset interrupt while a guest is running, the CPU must exit the guest before processing the host exception handler. After this patch, taking a sysrq+x with a CPU running in a guest gives a trace like this: cpu 0x27: Vector: 100 (System Reset) at [c000000fdf5776f0] pc: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv] lr: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv] sp: c000000fdf577850 msr: 9000000002803033 current = 0xc000000fdf4b1e00 paca = 0xc00000000fd4d680 softe: 3 irq_happened: 0x01 pid = 6608, comm = qemu-system-ppc Linux version 4.14.0-rc7-01489-g47e1893a404a-dirty #26 SMP [c000000fdf577a00] c008000010159dd4 kvmppc_vcpu_run_hv+0x3dc/0x12d0 [kvm_hv] [c000000fdf577b30] c0080000100a537c kvmppc_vcpu_run+0x44/0x60 [kvm] [c000000fdf577b60] c0080000100a1ae0 kvm_arch_vcpu_ioctl_run+0x118/0x310 [kvm] [c000000fdf577c00] c008000010093e98 kvm_vcpu_ioctl+0x530/0x7c0 [kvm] [c000000fdf577d50] c000000000357bf8 do_vfs_ioctl+0xd8/0x8c0 [c000000fdf577df0] c000000000358448 SyS_ioctl+0x68/0x100 [c000000fdf577e30] c00000000000b220 system_call+0x58/0x6c --- Exception: c01 (System Call) at 00007fff76868df0 SP (7fff7069baf0) is in userspace Fixes: e36d0a2ed5 ("powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06Merge branch 'x86/fpu' into x86/asm, to pick up fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05f2fs: avoid race in between GC and block exchangeChao Yu
During block exchange in {insert,collapse,move}_range, page-block mapping is unstable due to mapping moving or recovery, so there should be no concurrent cache read operation rely on such mapping, nor cache write operation to mess up block exchange. So this patch let background GC be aware of that. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: save a multiplication for last_nid calculationFan Li
Use a slightly easier way to calculate last_nid. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: fix summary info corruptionChao Yu
Sometimes, after running generic/270 of fstest, fsck reports summary info and actual position of block address in direct node becoming inconsistent. The root cause is race in between __f2fs_replace_block and change_curseg as below: Thread A Thread B - __clone_blkaddrs - f2fs_replace_block - __f2fs_replace_block - segnoA = GET_SEGNO(sbi, blkaddrA); - type = se->type:=CURSEG_HOT_DATA - if (!IS_CURSEG(sbi, segnoA)) type = CURSEG_WARM_DATA - allocate_data_block - allocate_segment - get_ssr_segment - change_curseg(segnoA, CURSEG_HOT_DATA) - change_curseg(segnoA, CURSEG_WARM_DATA) - reset_curseg - __set_sit_entry_type - change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA So finally, hot curseg locates in segnoA, but type of segnoA becomes CURSEG_WARM_DATA. Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false), as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA, then change its summary cache and writeback it to summary block. But segnoA is used by hot type curseg too, once it moves or persist, it will cover summary block content with inner old summary cache, result in inconsistent status. This patch tries to fix this issue by introduce global curseg lock to avoid race in between __f2fs_replace_block and change_curseg. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: remove dead code in update_meta_pageChao Yu
After commit a468f0ef516f ("f2fs: use crc and cp version to determine roll-forward recovery"), last caller of update_meta_page passing @src with NULL is gone, so remove related dead code there. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: remove unneeded semicolonChao Yu
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: don't bother with inode->i_versionJeff Layton
f2fs does not set the SB_I_VERSION flag, so the i_version will never be incremented on write. It was recently changed to increment the i_version on a quota write, which isn't necessary here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: check curseg space before foreground GCChao Yu
When we are closing to trigger foreground GC, if there are only a few of dirty metas, we can log these dirty metas in left space of opened segments instead of triggering foreground GC. With this patch, total count of foreground GC triggered by test/generic/* of fstest suit reduce from 254 to 184. So let's do the check before foreground GC anyway. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: use rw_semaphore to protect SIT cacheChao Yu
There are some cases user didn't update SIT cache under this lock, so let's use rw_semaphore instead of mutex to enhance concurrently accessing. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support quota sys filesJaegeuk Kim
This patch supports hidden quota files in the system, which will be used for Android. It requires up-to-date f2fs-tools later than v1.9.0. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add quota_ino feature infraJaegeuk Kim
This patch adds quota_ino feature infra to be used for quota files. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: optimize __update_nat_bitsFan Li
Make three modification for __update_nat_bits: 1. Take the codes of dealing the nat with nid 0 out of the loop Such nat only needs to be dealt with once at beginning. 2. Use " nat_index == 0" instead of " start_nid == 0" to decide if it's the first nat block It's better that we don't assume @start_nid is the first nid of the nat block it's in. 3. Use " if (nat_blk->entries[i].block_addr != NULL_ADDR)" to explicitly comfirm the value of block_addr use constant to make sure the codes is right, even if the value of NULL_ADDR changes. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: modify for accurate fggc node io statYunlei He
modify for accurate fggc node io stat Signed-off-by: Yunlei He <heyunlei@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05Revert "f2fs: handle dirty segments inside refresh_sit_entry"Yunlong Song
This reverts commit 5e443818fa0b2a2845561ee25bec181424fb2889 The commit should be reverted because call sequence of below two parts of code must be kept: a. update sit information, it needs to be updated before segment allocation since latter allocation may trigger SSR, and SSR allocation needs latest valid block information of all segments. b. update segment status, it needs to be updated after segment allocation since we can skip updating current opened segment status. Fixes: 5e443818fa0b ("f2fs: handle dirty segments inside refresh_sit_entry") Suggested-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: remove refresh_sit_entry function] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add a function to move nidFan Li
This patch add a new function to move nid from one state to another. Move operation is heavily used, by adding a new function for it we can cut down some branches from several flow. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: export SSR allocation thresholdChao Yu
This patch exports min_ssr_segments threshold in sysfs to let user control triggering SSR allocation flexibly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: give correct trimmed blocks in fstrimChao Yu
We have supported to issue discard in specified range during fstrim, it needs to return caller with successfully trimmed bytes in that range instead of bytes of invalid blocks which are scanned in checkpoint. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support bio allocation error injectionChao Yu
This patch adds to support bio allocation error injection to simulate out-of-memory test scenario. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support get_page error injectionChao Yu
This patch adds to support get_page error injection to simulate out-of-memory test scenario. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 19:17:42 +0000