summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-21igc: Remove obsolete maskSasha Neftin
'IGC_CTRL_EXT_LINK_MODE_MASK' not in use. This patch comes to tidy up obsolete define. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove obsolete nvm typeSasha Neftin
i225 devices use only spi nvm type. This patch comes to tidy up obsolete nvm types. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused phy typeSasha Neftin
_phy_none type not in use. Clean up the code accordingly, and get rid of the unused enum line Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused _I_PHY_ID defineSasha Neftin
_I_PHY_ID not in use. Clean up the code accordingly, and get rid of the unused define Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: support crosstimestamping on E822 devices if supportedJacob Keller
E822 devices on supported platforms can generate a cross timestamp between the platform ART and the device time. This process allows for very precise measurement of the difference between the PTP hardware clock and the platform time. This is only supported if we know the TSC frequency relative to ART, so we do not enable this unless the boot CPU has a known TSC frequency (as required by convert_art_ns_to_tsc). Because PCIe PTM support is not available on all platforms, introduce CONFIG_ICE_HWTS and make it depend on X86 where we know the support exists. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: exit bypass mode once hardware finishes timestamp calibrationJacob Keller
Once the E822 device has sent and received one packet, the hardware computes the internal delay of the PHY using a process known as Vernier calibration. This calibration calculates a more accurate offset for the Tx and Rx timestamps. To make use of this offset, we need to exit the bypass mode. This cannot be done until the PHY has completed offset calibration, as indicated by the offset valid bits. To handle this, introduce a kthread work item which will poll the offset valid bits every few milliseconds seeing if it is safe to exit bypass mode. Once we have finished calibrating the offsets, we can program the total Tx and Rx offset registers and turn off the bypass bit. This allows the hardware to include the more precise vernier calibration offset, and improves the timestamp precision. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: ensure the hardware Clock Generation Unit is configuredJacob Keller
The E822 device has a Clock Generation Unit (CGU) responsible for determining the clock frequency that drives the timers. Ensure this function is initialized when bringing up the PTP support, so that the clock has a known frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: implement basic E822 PTP supportJacob Keller
Implement support for the basic operations needed to enable the PTP hardware clock on E822 devices. This includes implementations for the various PHY access functions, as well as the ability to start and stop the PHY timers. This is different from the E810 device because the configuration depends on link speed, so we cannot just start the PHYs immediately. We must wait until the link is up to get proper values for the speed based initialization. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: convert clk_freq capability into time_refJacob Keller
Convert the clk_freq value into the associated time_ref frequency value for E822 devices. This simplifies determining the time reference value for the clock. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_ptp_init_phc functionJacob Keller
When we enable support for E822 devices, there are some additional steps required to initialize the PTP hardware clock. To make this easier to implement as device-specific behavior, refactor the register setups in ice_ptp_init_owner to a new ice_ptp_init_phc function defined in ice_ptp_hw.c This function will have a common section, and an e810 specific sub-implementation. This will enable easily extending the functionality to cover the E822 specific setup required to initialize the hardware clock generation unit. It also makes it clear which steps are E810 specific vs which ones are necessary for all ice devices. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: use 'int err' instead of 'int status' in ice_ptp_hw.cJacob Keller
The ice_ptp_hw.c file introduced a bunch of uses of "int status" instead of the more traditional "int err" or "int ret". These are actually traditional Linux error codes (as opposed to the recently removed ice_status enumeration values). We're about to add a bunch of new functions to ice_ptp_hw.c. It's normally preferred in the ice driver to use "int ret" or "int err" when dealing with error code values. Instead of making the new functions use "int status" lets just fix all of ice_ptp_hw.c to use "int err". This will match the new functions and ensures a consistent style across at least the PTP related files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: PTP: move setting of tstamp_configJacob Keller
The tstamp_config structure is being set inside of ice_ptp_cfg_timestamp, which is the function used to set Tx and Rx timestamping during initialization. This function is also used in order to set the PHY port timestamping status. However, it makes sense to always set the tstamp_config directly whenever the ice_set_tx_tstamp or ice_set_rx_tstamp functions are called. Move assignment of tstamp_config into the related functions and out of ice_ptp_cfg_timestamp. Now that we assign the timestamp mode in the relevant functions, we no longer modify the config value in ice_set_timestamp_mode. In turn, we no longer want to copy that config value into the PF cached structure. Instead, this is now the source of truth for actual configuration. On success of ice_set_timestamp_mode, copy the real configured mode back to report it out to userspace. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_base_incval functionJacob Keller
A future change will add additional possible increment values for the E822 device support. To handle this, we want to look up the increment value to use instead of hard coding it to the nominal value for E810 devices. Introduce ice_base_incval as a function to get the best nominal increment value to use. For now, it just returns the E810 value, but will be refactored in the future to look up the value based on the device type and configured clock frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: Fix E810 PTP reset flowKarol Kolacinski
The PF reset does not reset PHC and PHY clocks so it's unnecessary to stop them and reinitialize after the reset. Configuring timestamping changes the VSI fields so it needs to be performed after VSIs are initialized, which was not done in case of a reset. Suggested-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pasi Vaananen <pvaanane@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21usb: typec: ucsi: Only check the contract if there is a connectionHeikki Krogerus
The driver must make sure there is an actual connection before checking details about the USB Power Delivery contract. Those details are not valid unless there is a connection. This fixes NULL pointer dereference that is caused by an attempt to register bogus partner alternate mode that the firmware on some platform may report before the actual connection. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215117 Fixes: 6cbe4b2d5a3f ("usb: typec: ucsi: Check the partner alt modes always if there is PD contract") Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/eb34f98f-00ef-3238-2daa-80481116035d@leemhuis.info/ Link: https://lore.kernel.org/r/20211221140352.45501-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21gpio: virtio: remove timeoutVincent Whitchurch
The driver imposes an arbitrary one second timeout on virtio requests, but the specification doesn't prevent the virtio device from taking longer to process requests, so remove this timeout to support all systems and device implementations. Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-21Merge tag 'qcom-dts-for-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DeviceTree updates for v5.17 To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe endpoint controller, as well as enables these for the FN960 device. The SDX65 5G platform is introduced, currently with definitions necessary to boot to a shell. The undocumented property "input-name" is dropped throughout the dts files, dwc3 nodes throughout gains more specific compatibles and lastly building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to its normal operation in 64-bit mode. * tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Drop input-name property ARM: dts: qcom: sdx65: Add pincontrol node ARM: dts: qcom: Add SDX65 platform and MTP board support dt-bindings: arm: qcom: Document SDX65 platform and boards dt-bindings: clock: Add SDX65 GCC clock bindings ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32 ARM: dts: qcom: sdx55-t55: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable IPA ARM: dts: qcom: sdx55-fn980: Enable PCIe EP ARM: dts: qcom: sdx55: Add support for PCIe EP ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY ARM: dts: qcom: sdx55: Add support for PCIe PHY ARM: dts: qcom: update USB nodes with new platform specific compatible Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler moduleWu Bo
Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-12-21Merge tag 'qcom-drivers-for-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.17 This introduces RPM power-domain support for the SM8450, SM6125 and QCM2290 platforms. It them clean up the platform-based naming of the resources definitions throughout the RPMh PD driver. The last-level cache controller driver gains SM8350 support. The RPM sleep stats driver gains support for several older systems that had a slightly different memory layout for this information. The socinfo gains SM8450, SM6350 and SM7227 definitions. In addition to the DeviceTree binding updates related to these changes new compatibles was added to describe the SM8450 and the Kryo 780 CPU. Lastly a few typo and style fixes are introduced. * tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ... Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21drm/i915: Add ww ctx to i915_gem_object_trylockMaarten Lankhorst
This is required for i915_gem_evict_vm, to be able to evict the entire VM, including objects that are already locked to the current ww ctx. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-12-maarten.lankhorst@linux.intel.com
2021-12-21drm/i915: Require object lock when freeing pages during destructionMaarten Lankhorst
TTM already requires this, and we require it for delayed destroy. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-11-maarten.lankhorst@linux.intel.com
2021-12-21drm/i915: Trylock the object when shrinkingMaarten Lankhorst
We're working on requiring the obj->resv lock during unbind, fix the shrinker to take the object lock. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-10-maarten.lankhorst@linux.intel.com
2021-12-21mmc: mmci: stm32: clear DLYB_CR after sending tuning commandYann Gautier
During test campaign, and especially after several unbind/bind sequences, it has been seen that the SD-card on SDMMC1 thread could freeze. The freeze always appear on a CMD23 following a CMD19. Checking SDMMC internal registers shows that the tuning command (CMD19) has failed. The freeze is then due to the delay block involved in the tuning sequence. To correct this, clear the delay block register DLYB_CR register after the tuning commands. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211215141727.4901-4-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21arm64: exynos: Enable Exynos Multi-Core Timer driverMarek Szyprowski
Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support for ARM64 Exynos SoCs. Even though ARM architected timer is available on all ARM64 SoCs, and used for managing timer hardware and clock source events, MCT timer still can be used as a wakeup source, as stated in commitae460fd9164b ("clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64"). It's also nice to be able to test available MCT IP-core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211101193531.15078-3-semen.protsenko@linaro.org Link: https://lore.kernel.org/r/20211220165004.17005-2-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: stable@vger.kernel.org cc: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21arm64: defconfig: Enable Samsung I2C driverSam Protsenko
i2c-s3c2410 driver is needed for some arm64 Exynos SoCs, e.g. Exynos850. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211121150558.21801-1-semen.protsenko@linaro.org Link: https://lore.kernel.org/r/20211220165004.17005-1-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-21EDAC/sb_edac: Remove redundant initialization of variable rcColin Ian King
The variable rc is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and thus remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211126221848.1125321-1-colin.i.king@gmail.com
2021-12-21iwlwifi: mei: wait before mapping the shared areaEmmanuel Grumbach
The shared area is a DMA memory allocated in the host and mapped so that the host and the CSME firmware can exchange data. It is mapped through a dedicated PCI device that is driven by the mei bus driver. The bus driver is in charge of allocating and mapping this memory. It also needs to configure the CSME firmware with a specific set of commands, so that the CSME firmware will know that this memory is meant to be used by its internal WLAN module. For this, the CSME firmware first needs to completely initialize its WLAN module and only then get the mapping request. The problem is that the mei bus enumeration completes before the WLAN is completely ready. This means that the WLAN module's initialization is racing with iwlmei's allocation and mapping flow. Testing showed a problem in resume flows where iwlmei was too fast and the DMA mapping failed. Add a delay to avoid this. This is still racy, but our measurements showed that we have a good margin and we should now be safe. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211220142940.8b6279e3d0be.I6fe128b0b86149a85535104822c8355b367887c8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mei: clear the ownership when the driver goes downEmmanuel Grumbach
When the driver is unregistered, CSME will take ownership on the device. Reflect this in the iwlmei object so that we will remember to re-ask for ownership when the driver will register again. Not doing so will cause CSME not to give the host ownership and we will see the following error message when trying to bring up the interface: iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw Couldn't prepare the card but SAP is connected iwlwifi 0000:a9:00.0: Error while preparing HW: -16 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211220142940.c7bb5b7644df.I48498d9fd6e3959562205af67aa5f1a822eb762d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: yoyo: fix issue with new DBGI_SRAM region read.Mukesh Sisodiya
NIC has been grabbed for reading twice which is leading to NIC hang. Code correction are done for reading data with no grab function. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.55527214f8c9.I1748215ccb3fa20a3491a46a49b12e04eb560ac6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: fw: fix some scan kernel-docJohannes Berg
Some devices also use iwl_scan_config_v2 struct, so link it in the documentation for SCAN_CFG_CMD. Fix a bunch of kernel-doc as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.3331df94b106.If6c96b0d386e1c5988c8da6b69257e8f2e737f07@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQLuca Coelho
In some rare cases when the HW is in a bad state, we may get this interrupt when prph_info is not set yet. Then we will try to dereference it to check the sleep_notif element, which will cause an oops. Fix that by ignoring the interrupt if prph_info is not set yet. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: remove card state notification codeJohannes Berg
This notification ID was actually used for something else we never implemented, but luckily we only had some debug code here. Just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.a67b5b9db259.Ic55b306fcd2a3525b3993f4b7e00622dd95053ba@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: drop too short packets silentlyJohannes Berg
There's little value in this warning, we get a warning here if firmware passes us a short packet, particularly in monitor mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.305d12cf51ac.I2e4e6874113b1e5d8ee467b8a2d90820cc6ddde9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: fix AUX ROC removalAvraham Stern
When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event always tries to cancel session protection. However, AUX ROC does not use session protection so it was never removed. As a result, if the driver tries to allocate another AUX ROC event right after cancelling the first one, it will fail with a warning. In addition, the time event data passed to iwl_mvm_remove_aux_roc_te() is incorrect. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: return op_mode only in case the failure is from MEIMordechay Goodstein
Currently we always return the op_mode with valid pointer in case getting NVM failed, while it's only relevant for cases that CSME is the owner of the nic. Fix this by checking also who's the owner of the nic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.b1e96021b616.Id0164855f2dd01ecdecf79b239d6ee5974882245@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: support Bz TX checksum offloadJohannes Berg
Support TX checksum offload for Bz devices, where we have full checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't need to parse the IP headers or anything. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: add US/CA to TAS block list if OEM isn't allowedMiri Korenblit
If OEM isn't in the allowed list, TAS should be disabled in US/CA. Currently, if the OEM isn't allowed - we're sending the TAS only if we are not in US or CA. But this country check is done before we even know the country (usually the configuration is ZZ in that stage). So do the following instead: 1. Check if the current OEM is in the allowed list 2. If not - add US and CA to tas_block_list_array 3. Send the TAS table to FW. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set schedule scan profilesAyala Beker
Set scan offload profiles auth algorithms with valid algorithms only. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.525f2d468d22.I4d497d6a0a14ffb833f7edc7e980d26bbf8d7527@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: set protected flag only for NDP rangingAvraham Stern
Don't use protected ranging negotiation for FTM ranging as responders that support only FTM ranging don't expect the FTM request to be protected. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: 517a5eb9fab2 ("iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiation") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.f50ed0e3c6b3.Ibff247ee9d4e6e0a1a2d08a3c8a4bbb37e6829dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: pcie: add killer devices to the driverYaara Baruch
add killer subsystem devices from the 1675i and 1675s family to the driver. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.2d5bec2d7b68.Icffb4e27390e6a5c76a0cbe7abf7472558f323d6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: perform 6GHz passive scan after suspendAvraham Stern
The 6GHz passive scan is performed only once every 50 minutes. However, in case of suspend/resume, the regulatory information is reset, so 6GHz channels may become disabled. Fix it by performing a 6GHz passive scan within 60 seconds after suspend/resume even if the 50 minutes timeout did not expire yet. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: e8fe3b41c3a3 ("iwlwifi: mvm: Add support for 6GHz passive scan") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set channel flagsAyala Beker
In case of forced passive scan on a UHB channel, don't set the direct probe option for this channel. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: always store the PPAG table as the latest version.Miri Korenblit
In case of a conflict between BIOS version and FW version of the PPAG table - the values arrive in the FW in the wrong places. This happens because we're storing the table in different structures depending on the BIOS version, not on the FW version, and so the FW doesn't get what it expect to. Always store the table in a v2 structure (which is a superset of v1 and v0). Also store the table in a structured way and in it's own structure, rather then storing it in the ppag command structure, similarly to the WRDS, EWRD and WGDS tables. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.793a509da7bd.Ia176746a28b816b5f788cce9a281139735909e2a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: bump FW API to 69 for AX devicesLuca Coelho
Start supporting API version 69 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.7d8fe0dffaea.I2de65c1efd9ab464d4158a3d852f73efe63024f8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: Fix calculation of frame lengthIlan Peer
The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: test roc running status bits before removing the staNathan Errera
In some cases the sta is being removed twice since we do not test the roc aux running before removing it. Start looking at the bit before removing the sta. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: don't pass actual WGDS revision number in table_revisionLuca Coelho
The FW API for PER_CHAIN_LIMIT_OFFSET_CMD is misleading. The element name is table_rev, but it shouldn't actually contain the table revision number, but whether we should use the South Korea scheme or not. Fix the driver so that we only set this value to either 0 or 1. It will only be 1 (meaning South Korea) if the ACPI WGDS table revision is 1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 664c011b763e ("iwlwifi: acpi: support reading and storing WGDS revision 2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.abed3b8119c7.I1fdc2c14577523fcffdfe8fb5902c2d8efde7e09@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: yoyo: support TLV-based firmware resetMukesh Sisodiya
Support resetting the firmware via TLV-based debugging. When applied, this will cause the driver to reset the firmware when the debugging is triggered. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d59b29653a1e.I7b3be4a1ad1a9d5d0e86259740e89ac113c9348b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 18:38:12 +0000