summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-31mailbox: bcm-flexrm-mailbox: Set IRQ affinity hint for FlexRM ring IRQsAnup Patel
This patch set IRQ affinity hint for FlexRM ring IRQ at time of enabling ring (i.e. flexrm_startup()). The IRQ affinity hint will allow FlexRM driver to distribute FlexRM ring IRQs across online CPUs so that all FlexRM ring IRQs don't land in CPU0 by default. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-08-31Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-nextPaul Mackerras
This merges in the 'ppc-kvm' topic branch from the powerpc tree in order to bring in some fixes which touch both powerpc and KVM code. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: Book3S HV: Report storage key support to userspacePaul Mackerras
This adds information about storage keys to the struct returned by the KVM_PPC_GET_SMMU_INFO ioctl. The new fields replace a pad field, which was zeroed by previous kernel versions. Thus userspace that knows about the new fields will see zeroes when running on an older kernel, indicating that storage keys are not supported. The size of the structure has not changed. The number of keys is hard-coded for the CPUs supported by HV KVM, which is just POWER7, POWER8 and POWER9. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9Paul Mackerras
Commit 2f2724630f7a ("KVM: PPC: Book3S HV: Cope with host using large decrementer mode", 2017-05-22) added code to treat the hypervisor decrementer (HDEC) as a 64-bit value on POWER9 rather than 32-bit. Unfortunately, that commit missed one place where HDEC is treated as a 32-bit value. This fixes it. This bug should not have any user-visible consequences that I can think of, beyond an occasional unnecessary exit to the host kernel. If the hypervisor decrementer has gone negative, then the bottom 32 bits will be negative for about 4 seconds after that, so as long as we get out of the guest within those 4 seconds we won't conclude that the HDEC interrupt is spurious. Reported-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Fixes: 2f2724630f7a ("KVM: PPC: Book3S HV: Cope with host using large decrementer mode") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: Book3S HV: Fix invalid use of register expressionAndreas Schwab
binutils >= 2.26 now warns about misuse of register expressions in assembler operands that are actually literals. In this instance r0 is being used where a literal 0 should be used. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> [mpe: Split into separate KVM patch, tweak change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validationNicholas Piggin
KVM currently validates the size of the VPA registered by the client against sizeof(struct lppaca), however we align (and therefore size) that struct to 1kB to avoid crossing a 4kB boundary in the client. PAPR calls for sizes >= 640 bytes to be accepted. Hard code this with a comment. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTERRam Pai
In handling a H_ENTER hypercall, the code in kvmppc_do_h_enter clobbers the high-order two bits of the storage key, which is stored in a split field in the second doubleword of the HPTE. Any storage key number above 7 hence fails to operate correctly. This makes sure we preserve all the bits of the storage key. Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: e500mc: Fix a NULL dereferenceDan Carpenter
We should set "err = -ENOMEM;", otherwise it means we're returning ERR_PTR(0) which is NULL. It results in a NULL pointer dereference in the caller. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31KVM: PPC: e500: Fix some NULL dereferences on errorDan Carpenter
There are some error paths in kvmppc_core_vcpu_create_e500() where we forget to set the error code. It means that we return ERR_PTR(0) which is NULL and it results in a NULL pointer dereference in the caller. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-30scsi: qla2xxx: Reset the logo flag, after target re-login.Quinn Tran
After relogin is sucessful, "send_els_logo" flag needs to be reinitialized. This will allow next re-login to happen successfully. In target mode, this flag was not reset correctly, causing IO's failure during reset recovery and port ON/OFF test cases from initiator. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: qla2xxx: Fix slow mem alloc behind lockQuinn Tran
Call Trace: [<ffffffff81341687>] dump_stack+0x6b/0xa4 [<ffffffff810c3e30>] ? print_irqtrace_events+0xd0/0xe0 [<ffffffff8109e3c3>] ___might_sleep+0x183/0x240 [<ffffffff8109e4d2>] __might_sleep+0x52/0x90 [<ffffffff811fe17b>] kmem_cache_alloc_trace+0x5b/0x300 [<ffffffff810c666b>] ? __lock_acquired+0x30b/0x420 [<ffffffffa0733c28>] qla2x00_alloc_fcport+0x38/0x2a0 [qla2xxx] [<ffffffffa07217f4>] ? qla2x00_do_work+0x34/0x2b0 [qla2xxx] [<ffffffff816cc82b>] ? _raw_spin_lock_irqsave+0x7b/0x90 [<ffffffffa072169a>] ? qla24xx_create_new_sess+0x3a/0x160 [qla2xxx] [<ffffffffa0721723>] qla24xx_create_new_sess+0xc3/0x160 [qla2xxx] [<ffffffff810c91ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa07218f8>] qla2x00_do_work+0x138/0x2b0 [qla2xxx] Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: qla2xxx: Clear fc4f_nvme flagDarren Trap
Signed-off-by: Darren Trap <darren.trap@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: qla2xxx: add missing includes for qla_isrJohannes Thumshirn
Since commit 7401bc18d1ee ("scsi: qla2xxx: Add FC-NVMe command handling") we make use of 'struct nvmefc_fcp_req' in qla24xx_nvme_iocb_entry() without including linux/nvme-fc-driver.h where it is defined. Add linux/nvme-fc-driver.h (and scsi/fc/fc_fs.h as nvme-fc-driver.h needs the definition of 'struct fc_ba_rjt' from scsi/fc/fc_fs.h) to the header files included by qla_isr.c. Fixes: 7401bc18d1ee ("scsi: qla2xxx: Add FC-NVMe command handling") Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: qla2xxx: Fix an integer overflow in sysfs codeDan Carpenter
The value of "size" comes from the user. When we add "start + size" it could lead to an integer overflow bug. It means we vmalloc() a lot more memory than we had intended. I believe that on 64 bit systems vmalloc() can succeed even if we ask it to allocate huge 4GB buffers. So we would get memory corruption and likely a crash when we call ha->isp_ops->write_optrom() and ->read_optrom(). Only root can trigger this bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061 Cc: <stable@vger.kernel.org> Fixes: b7cc176c9eb3 ("[SCSI] qla2xxx: Allow region-based flash-part accesses.") Reported-by: shqking <shqking@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2()Nikola Pajkovsky
aac_convert_sgraw2() kmalloc memory and return -1 on error, which should be -ENOMEM. However, nobody is checking return value, so with this change, -ENOMEM is propagated to upper layer. Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: aacraid: get rid of one level of indentationNikola Pajkovsky
unsigned long byte_count = 0; nseg = scsi_dma_map(scsicmd); if (nseg < 0) return nseg; if (nseg) { ... } return byte_count; is equal to unsigned long byte_count = 0; nseg = scsi_dma_map(scsicmd); if (nseg <= 0) return nseg; ... return byte_count; No other code has changed. [mkp: fix checkpatch complaints] Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: aacraid: fix indentation errorsNikola Pajkovsky
fix stupid indent error, no rocket science here. Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30scsi: storvsc: fix memory leak on ring buffer busyLong Li
When storvsc is sending I/O to Hyper-v, it may allocate a bigger buffer descriptor for large data payload that can't fit into a pre-allocated buffer descriptor. This bigger buffer is freed on return path. If I/O request to Hyper-v fails due to ring buffer busy, the storvsc allocated buffer descriptor should also be freed. [mkp: applied by hand] Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host") Cc: <stable@vger.kernel.org> Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"Florian Fainelli
This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") because it is creating the possibility for a NULL pointer dereference. David Daney provide the following call trace and diagram of events: When ndo_stop() is called we call: phy_disconnect() +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL; +---> phy_stop_machine() | +---> phy_state_machine() | +----> queue_delayed_work(): Work queued. +--->phy_detach() implies: phydev->attached_dev = NULL; Now at a later time the queued work does: phy_state_machine() +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL: CPU 12 Unable to handle kernel paging request at virtual address 0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c Oops[#1]: CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1 Workqueue: events_power_efficient phy_state_machine task: 80000004021ed100 task.stack: 8000000409d70000 $ 0 : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004 $ 4 : 0000000000000000 0000000000000001 0000000000000004 0000000000000000 $ 8 : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000 $12 : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b $16 : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800 $20 : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008 $24 : 0000000000000061 ffffffff808637b0 $28 : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c Hi : 000000000000002a Lo : 000000000000003f epc : ffffffff80de37ec netif_carrier_off+0xc/0x58 ra : ffffffff80c7804c phy_state_machine+0x48c/0x4f8 Status: 14009ce3 KX SX UX KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 0000000000000048 PrId : 000d9501 (Cavium Octeon III) Modules linked in: Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000, task=80000004021ed100, tls=0000000000000000) Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00 0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300 80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001 ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000 8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000 ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240 0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00 8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8 8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08 8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080 ... Call Trace: [<ffffffff80de37ec>] netif_carrier_off+0xc/0x58 [<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8 [<ffffffff808a1708>] process_one_work+0x158/0x368 [<ffffffff808a1ac0>] worker_thread+0x150/0x4c0 [<ffffffff808a8598>] kthread+0xc8/0xe0 [<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c The original motivation for this change originated from Marc Gonzales indicating that his network driver did not have its adjust_link callback executing with phydev->link = 0 while he was expecting it. PHYLIB has never made any such guarantees ever because phy_stop() merely just tells the workqueue to move into PHY_HALTED state which will happen asynchronously. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: David Daney <ddaney.cavm@gmail.com> Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30hwmon: (pmbus) Add support for Texas Instruments tps53679 deviceVadim Pasternak
The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by the device: VR12.0 mode, 5-mV DAC - 0x21 VR12.5 mode, 10-mV DAC - 0x22 VR13.0 mode, 10-mV DAC - 0x24 IMVP8 mode, 5-mV DAC - 0x25 VR13.0 mode, 5-mV DAC - 0x27 Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-30Merge tag 'mlx5-fixes-2017-08-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-08-30 This series contains some misc fixes to the mlx5 driver. Please pull and let me know if there's any problem. For -stable: Kernels >= 4.12 net/mlx5e: Fix CQ moderation mode not set properly net/mlx5e: Don't override user RSS upon set channels Kernels >= 4.11 net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address Kernels >= 4.10 net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap net/mlx5e: Check for qos capability in dcbnl_initialize Kernels >= 4.9 net/mlx5e: Fix dangling page pointer on DMA mapping error Kernels >= 4.8 net/mlx5e: Fix inline header size for small packets net/mlx5: E-Switch, Unload the representors in the correct order net/mlx5: Fix arm SRQ command for ISSI version 0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30remoteproc: Stop subdevices in reverse orderBjorn Andersson
Subdevices might depend on earlier registered subdevices for communication purposes, as such they should be stopped in reverse order so that said communication channel is removed after the dependent subdevice is stopped. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-30rpmsg: glink: Release idr lock before returning on errorBjorn Andersson
The idr_lock should be released in the case that we don't find the given channel. Fixes: 44f6df922a26 ("rpmsg: glink: Fix idr_lock from mutex to spinlock") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-30remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driverOleksij Rempel
Provide a basic driver to control Cortex M4 co-processor found on NXP i.MX7D and i.MX6SX. Currently it is able to resolve addresses between M4 and main CPU, start and stop the co-processor. Other functionality is not provided or test. This driver was tested on NXP i.MX7D and expected to work on i.MX6SX as well. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-30remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller ↵Oleksij Rempel
driver Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-30hv_netvsc: Fix typos in the document of UDP hashingHaiyang Zhang
There are two typos in the document, netvsc.txt, regarding UDP hashing level. This patch fixes them. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278Florian Fainelli
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set, fix that. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30xen-netfront: be more drop monitor friendlyEric Dumazet
xennet_start_xmit() might copy skb with inappropriate layout into a fresh one. Old skb is freed, and at this point it is not a drop, but a consume. New skb will then be either consumed or dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30kcm: do not attach PF_KCM sockets to avoid deadlockEric Dumazet
syzkaller had no problem to trigger a deadlock, attaching a KCM socket to another one (or itself). (original syzkaller report was a very confusing lockdep splat during a sendmsg()) It seems KCM claims to only support TCP, but no enforcement is done, so we might need to add additional checks. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net/mlx5e: Support RSS for GRE tunneled packetsGal Pressman
Introduce a new flow table and indirect TIRs which are used to hash the inner packet headers of GRE tunneled packets. When a GRE tunneled packet is received, the TTC flow table will match the new IPv4/6->GRE rules which will forward it to the inner TTC table. The inner TTC is similar to its counterpart outer TTC table, but matching the inner packet headers instead of the outer ones (and does not include the new IPv4/6->GRE rules). The new rules will not add steering hops since they are added to an already existing flow group which will be matched regardless of this patch. Non GRE traffic will not be affected. The inner flow table will forward the packet to inner indirect TIRs which hash the inner packet and thus result in RSS for the tunneled packets. Testing 8 TCP streams bandwidth over GRE: System: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] Before: 21.3 Gbps (Single RQ) Now : 90.5 Gbps (RSS spread on 8 RQs) Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-31net/mlx5e: Support TSO and TX checksum offloads for GRE tunnelsGal Pressman
Add TX offloads support for GRE tunneled packets by reporting the needed netdev features. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-31net/mlx5e: Use IP version matching to classify IP trafficGal Pressman
This change adds the ability for flow steering to classify IPv4/6 packets with MPLS tag (Ethertype 0x8847 and 0x8848) as standard IP packets and hit IPv4/6 classification steering rules. Since IP packets with MPLS tag header have MPLS ethertype, they missed the IPv4/6 ethertype rule and ended up hitting the default filter forwarding all the packets to the same single RQ (No RSS). Since our device is able to look past the MPLS tag and identify the next protocol we introduce this solution which replaces ethertype matching by the device's capability to perform IP version identification and matching in order to distinguish between IPv4 and IPv6. Therefore, when driver is performing flow steering configuration on the device it will use IP version matching in IP classified rules instead of ethertype matching which will cause relevant MPLS tagged packets to hit this rule as well. If the device doesn't support IP version matching the driver will fall back to use legacy ethertype matching in the steering as before. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-30doc: Add documentation for the genalloc subsystemJonathan Corbet
Genalloc/genpool has kerneldoc comments, but nothing has ever been pulled into the docs themselves. Here's a first attempt, repurposed from an article I wrote at https://lwn.net/Articles/729653/. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-08-30assoc_array: fix path to assoc_array documentationAlexander Kuleshov
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-08-30bpf: test_maps: fix typos, "conenct" and "listeen"Colin Ian King
Trivial fix to typos in printf error messages: "conenct" -> "connect" "listeen" -> "listen" thanks to Daniel Borkmann for spotting one of these mistakes Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30qed: fix spelling mistake: "calescing" -> "coalescing"Colin Ian King
Trivial fix to spelling mistake in DP_NOTICE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: hns3: Fixes the wrong IS_ERR check on the returned phydev valueSalil Mehta
This patch removes the wrong check being done for the phy device being returned by the mdiobus_get_phy() function. This function never returns the error pointers. Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "A single patch removing some structure definitions from a uapi header file. These payloads are never processed directly by the kernel they are simply passed through an ioctl as opaque blobs to the ACPI _DSM (Device Specific Method) interface. Userspace should not be depending on the kernel to define these payloads. We will instead provide these definitions via the existing libndctl (https://github.com/pmem/ndctl) project that has NVDIMM command helpers and other definitions" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: clean up command definitions
2017-08-30Merge branch 'net-sched-init-failure-fixes'David S. Miller
Nikolay Aleksandrov says: ==================== net/sched: init failure fixes I went over all qdiscs' init, destroy and reset callbacks and found the issues fixed in each patch. Mostly they are null pointer dereferences due to uninitialized timer (qdisc watchdog) or double frees due to ->destroy cleaning up a second time. There's more information in each patch. I've tested these by either sending wrong attributes from user-spaces, no attributes or by simulating memory alloc failure where applicable. Also tried all of the qdiscs as a default qdisc. Most of these bugs were present before commit 87b60cfacf9f, I've tried to include proper fixes tags in each patch. I haven't included individual patch acks in the set, I'd appreciate it if you take another look and resend them. ==================== Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_tbf: fix two null pointer dereferences on init failureNikolay Aleksandrov
sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy callbacks but it may fail before the timer is initialized due to missing options (either not supplied by user-space or set as a default qdisc), also q->qdisc is used by ->reset and ->destroy so we need it initialized. Reproduce: $ sysctl net.core.default_qdisc=tbf $ ip l set ethX up Crash log: [ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 959.160323] IP: qdisc_reset+0xa/0x5c [ 959.160400] PGD 59cdb067 [ 959.160401] P4D 59cdb067 [ 959.160466] PUD 59ccb067 [ 959.160532] PMD 0 [ 959.160597] [ 959.160706] Oops: 0000 [#1] SMP [ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem [ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62 [ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000 [ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c [ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286 [ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000 [ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000 [ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff [ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0 [ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001 [ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0 [ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 959.163638] Call Trace: [ 959.163788] tbf_reset+0x19/0x64 [sch_tbf] [ 959.163957] qdisc_destroy+0x8b/0xe5 [ 959.164119] qdisc_create_dflt+0x86/0x94 [ 959.164284] ? dev_activate+0x129/0x129 [ 959.164449] attach_one_default_qdisc+0x36/0x63 [ 959.164623] netdev_for_each_tx_queue+0x3d/0x48 [ 959.164795] dev_activate+0x4b/0x129 [ 959.164957] __dev_open+0xe7/0x104 [ 959.165118] __dev_change_flags+0xc6/0x15c [ 959.165287] dev_change_flags+0x25/0x59 [ 959.165451] do_setlink+0x30c/0xb3f [ 959.165613] ? check_chain_key+0xb0/0xfd [ 959.165782] rtnl_newlink+0x3a4/0x729 [ 959.165947] ? rtnl_newlink+0x117/0x729 [ 959.166121] ? ns_capable_common+0xd/0xb1 [ 959.166288] ? ns_capable+0x13/0x15 [ 959.166450] rtnetlink_rcv_msg+0x188/0x197 [ 959.166617] ? rcu_read_unlock+0x3e/0x5f [ 959.166783] ? rtnl_newlink+0x729/0x729 [ 959.166948] netlink_rcv_skb+0x6c/0xce [ 959.167113] rtnetlink_rcv+0x23/0x2a [ 959.167273] netlink_unicast+0x103/0x181 [ 959.167439] netlink_sendmsg+0x326/0x337 [ 959.167607] sock_sendmsg_nosec+0x14/0x3f [ 959.167772] sock_sendmsg+0x29/0x2e [ 959.167932] ___sys_sendmsg+0x209/0x28b [ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8 [ 959.168267] ? _raw_spin_unlock+0x27/0x31 [ 959.168432] ? __handle_mm_fault+0x651/0xdb1 [ 959.168602] ? check_chain_key+0xb0/0xfd [ 959.168773] __sys_sendmsg+0x45/0x63 [ 959.168934] ? __sys_sendmsg+0x45/0x63 [ 959.169100] SyS_sendmsg+0x19/0x1b [ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 959.169432] RIP: 0033:0x7fcc5097e690 [ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690 [ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003 [ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003 [ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006 [ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000 [ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf [ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24 98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb [ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610 [ 959.171821] CR2: 0000000000000018 Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_sfq: fix null pointer dereference on init failureNikolay Aleksandrov
Currently only a memory allocation failure can lead to this, so let's initialize the timer first. Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_netem: avoid null pointer deref on init failureNikolay Aleksandrov
netem can fail in ->init due to missing options (either not supplied by user-space or used as a default qdisc) causing a timer->base null pointer deref in its ->destroy() and ->reset() callbacks. Reproduce: $ sysctl net.core.default_qdisc=netem $ ip l set ethX up Crash log: [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1814.847181] IP: hrtimer_active+0x17/0x8a [ 1814.847270] PGD 59c34067 [ 1814.847271] P4D 59c34067 [ 1814.847337] PUD 37374067 [ 1814.847403] PMD 0 [ 1814.847468] [ 1814.847582] Oops: 0000 [#1] SMP [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O) [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62 [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000 [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246 [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000 [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8 [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000 [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001 [ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0 [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1814.850723] Call Trace: [ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93 [ 1814.851047] hrtimer_cancel+0x15/0x20 [ 1814.851211] qdisc_watchdog_cancel+0x12/0x14 [ 1814.851383] netem_reset+0xe6/0xed [sch_netem] [ 1814.851561] qdisc_destroy+0x8b/0xe5 [ 1814.851723] qdisc_create_dflt+0x86/0x94 [ 1814.851890] ? dev_activate+0x129/0x129 [ 1814.852057] attach_one_default_qdisc+0x36/0x63 [ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48 [ 1814.852406] dev_activate+0x4b/0x129 [ 1814.852569] __dev_open+0xe7/0x104 [ 1814.852730] __dev_change_flags+0xc6/0x15c [ 1814.852899] dev_change_flags+0x25/0x59 [ 1814.853064] do_setlink+0x30c/0xb3f [ 1814.853228] ? check_chain_key+0xb0/0xfd [ 1814.853396] ? check_chain_key+0xb0/0xfd [ 1814.853565] rtnl_newlink+0x3a4/0x729 [ 1814.853728] ? rtnl_newlink+0x117/0x729 [ 1814.853905] ? ns_capable_common+0xd/0xb1 [ 1814.854072] ? ns_capable+0x13/0x15 [ 1814.854234] rtnetlink_rcv_msg+0x188/0x197 [ 1814.854404] ? rcu_read_unlock+0x3e/0x5f [ 1814.854572] ? rtnl_newlink+0x729/0x729 [ 1814.854737] netlink_rcv_skb+0x6c/0xce [ 1814.854902] rtnetlink_rcv+0x23/0x2a [ 1814.855064] netlink_unicast+0x103/0x181 [ 1814.855230] netlink_sendmsg+0x326/0x337 [ 1814.855398] sock_sendmsg_nosec+0x14/0x3f [ 1814.855584] sock_sendmsg+0x29/0x2e [ 1814.855747] ___sys_sendmsg+0x209/0x28b [ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8 [ 1814.856082] ? _raw_spin_unlock+0x27/0x31 [ 1814.856251] ? __handle_mm_fault+0x651/0xdb1 [ 1814.856421] ? check_chain_key+0xb0/0xfd [ 1814.856592] __sys_sendmsg+0x45/0x63 [ 1814.856755] ? __sys_sendmsg+0x45/0x63 [ 1814.856923] SyS_sendmsg+0x19/0x1b [ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 1814.857256] RIP: 0033:0x7f733b2dd690 [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690 [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003 [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003 [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002 [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000 [ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3 31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b 45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89 [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590 [ 1814.860214] CR2: 0000000000000000 Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_fq_codel: avoid double free on init failureNikolay Aleksandrov
It is very unlikely to happen but the backlogs memory allocation could fail and will free q->flows, but then ->destroy() will free q->flows too. For correctness remove the first free and let ->destroy clean up. Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_cbq: fix null pointer dereferences on init failureNikolay Aleksandrov
CBQ can fail on ->init by wrong nl attributes or simply for missing any, f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL when it is activated. The first thing init does is parse opt but it will dereference a null pointer if used as a default qdisc, also since init failure at default qdisc invokes ->reset() which cancels all timers then we'll also dereference two more null pointers (timer->base) as they were never initialized. To reproduce: $ sysctl net.core.default_qdisc=cbq $ ip l set ethX up Crash log of the first null ptr deref: [44727.907454] BUG: unable to handle kernel NULL pointer dereference at (null) [44727.907600] IP: cbq_init+0x27/0x205 [44727.907676] PGD 59ff4067 [44727.907677] P4D 59ff4067 [44727.907742] PUD 59c70067 [44727.907807] PMD 0 [44727.907873] [44727.907982] Oops: 0000 [#1] SMP [44727.908054] Modules linked in: [44727.908126] CPU: 1 PID: 21312 Comm: ip Not tainted 4.13.0-rc6+ #60 [44727.908235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [44727.908477] task: ffff88005ad42700 task.stack: ffff880037214000 [44727.908672] RIP: 0010:cbq_init+0x27/0x205 [44727.908838] RSP: 0018:ffff8800372175f0 EFLAGS: 00010286 [44727.909018] RAX: ffffffff816c3852 RBX: ffff880058c53800 RCX: 0000000000000000 [44727.909222] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff8800372175f8 [44727.909427] RBP: ffff880037217650 R08: ffffffff81b0f380 R09: 0000000000000000 [44727.909631] R10: ffff880037217660 R11: 0000000000000020 R12: ffffffff822a44c0 [44727.909835] R13: ffff880058b92000 R14: 00000000ffffffff R15: 0000000000000001 [44727.910040] FS: 00007ff8bc583740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [44727.910339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [44727.910525] CR2: 0000000000000000 CR3: 00000000371e5000 CR4: 00000000000406e0 [44727.910731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [44727.910936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [44727.911141] Call Trace: [44727.911291] ? lockdep_init_map+0xb6/0x1ba [44727.911461] ? qdisc_alloc+0x14e/0x187 [44727.911626] qdisc_create_dflt+0x7a/0x94 [44727.911794] ? dev_activate+0x129/0x129 [44727.911959] attach_one_default_qdisc+0x36/0x63 [44727.912132] netdev_for_each_tx_queue+0x3d/0x48 [44727.912305] dev_activate+0x4b/0x129 [44727.912468] __dev_open+0xe7/0x104 [44727.912631] __dev_change_flags+0xc6/0x15c [44727.912799] dev_change_flags+0x25/0x59 [44727.912966] do_setlink+0x30c/0xb3f [44727.913129] ? check_chain_key+0xb0/0xfd [44727.913294] ? check_chain_key+0xb0/0xfd [44727.913463] rtnl_newlink+0x3a4/0x729 [44727.913626] ? rtnl_newlink+0x117/0x729 [44727.913801] ? ns_capable_common+0xd/0xb1 [44727.913968] ? ns_capable+0x13/0x15 [44727.914131] rtnetlink_rcv_msg+0x188/0x197 [44727.914300] ? rcu_read_unlock+0x3e/0x5f [44727.914465] ? rtnl_newlink+0x729/0x729 [44727.914630] netlink_rcv_skb+0x6c/0xce [44727.914796] rtnetlink_rcv+0x23/0x2a [44727.914956] netlink_unicast+0x103/0x181 [44727.915122] netlink_sendmsg+0x326/0x337 [44727.915291] sock_sendmsg_nosec+0x14/0x3f [44727.915459] sock_sendmsg+0x29/0x2e [44727.915619] ___sys_sendmsg+0x209/0x28b [44727.915784] ? do_raw_spin_unlock+0xcd/0xf8 [44727.915954] ? _raw_spin_unlock+0x27/0x31 [44727.916121] ? __handle_mm_fault+0x651/0xdb1 [44727.916290] ? check_chain_key+0xb0/0xfd [44727.916461] __sys_sendmsg+0x45/0x63 [44727.916626] ? __sys_sendmsg+0x45/0x63 [44727.916792] SyS_sendmsg+0x19/0x1b [44727.916950] entry_SYSCALL_64_fastpath+0x23/0xc2 [44727.917125] RIP: 0033:0x7ff8bbc96690 [44727.917286] RSP: 002b:00007ffc360991e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [44727.917579] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007ff8bbc96690 [44727.917783] RDX: 0000000000000000 RSI: 00007ffc36099230 RDI: 0000000000000003 [44727.917987] RBP: ffff880037217f98 R08: 0000000000000001 R09: 0000000000000003 [44727.918190] R10: 00007ffc36098fb0 R11: 0000000000000246 R12: 0000000000000006 [44727.918393] R13: 000000000066f1a0 R14: 00007ffc360a12e0 R15: 0000000000000000 [44727.918597] ? trace_hardirqs_off_caller+0xa7/0xcf [44727.918774] Code: 41 5f 5d c3 66 66 66 66 90 55 48 8d 56 04 45 31 c9 49 c7 c0 80 f3 b0 81 48 89 e5 41 55 41 54 53 48 89 fb 48 8d 7d a8 48 83 ec 48 <0f> b7 0e be 07 00 00 00 83 e9 04 e8 e6 f7 d8 ff 85 c0 0f 88 bb [44727.919332] RIP: cbq_init+0x27/0x205 RSP: ffff8800372175f0 [44727.919516] CR2: 0000000000000000 Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_hfsc: fix null pointer deref and double free on init failureNikolay Aleksandrov
Depending on where ->init fails we can get a null pointer deref due to uninitialized hires timer (watchdog) or a double free of the qdisc hash because it is already freed by ->destroy(). Fixes: 8d5537387505 ("net/sched/hfsc: allocate tcf block for hfsc root class") Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_hhf: fix null pointer dereference on init failureNikolay Aleksandrov
If sch_hhf fails in its ->init() function (either due to wrong user-space arguments as below or memory alloc failure of hh_flows) it will do a null pointer deref of q->hh_flows in its ->destroy() function. To reproduce the crash: $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000 Crash log: [ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null) [ 690.655565] IP: hhf_destroy+0x48/0xbc [ 690.655944] PGD 37345067 [ 690.655948] P4D 37345067 [ 690.656252] PUD 58402067 [ 690.656554] PMD 0 [ 690.656857] [ 690.657362] Oops: 0000 [#1] SMP [ 690.657696] Modules linked in: [ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57 [ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000 [ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc [ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246 [ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 [ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0 [ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000 [ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea [ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000 [ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0 [ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 690.671003] Call Trace: [ 690.671743] qdisc_create+0x377/0x3fd [ 690.672534] tc_modify_qdisc+0x4d2/0x4fd [ 690.673324] rtnetlink_rcv_msg+0x188/0x197 [ 690.674204] ? rcu_read_unlock+0x3e/0x5f [ 690.675091] ? rtnl_newlink+0x729/0x729 [ 690.675877] netlink_rcv_skb+0x6c/0xce [ 690.676648] rtnetlink_rcv+0x23/0x2a [ 690.677405] netlink_unicast+0x103/0x181 [ 690.678179] netlink_sendmsg+0x326/0x337 [ 690.678958] sock_sendmsg_nosec+0x14/0x3f [ 690.679743] sock_sendmsg+0x29/0x2e [ 690.680506] ___sys_sendmsg+0x209/0x28b [ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1 [ 690.681915] ? check_chain_key+0xb0/0xfd [ 690.682449] __sys_sendmsg+0x45/0x63 [ 690.682954] ? __sys_sendmsg+0x45/0x63 [ 690.683471] SyS_sendmsg+0x19/0x1b [ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 690.684516] RIP: 0033:0x7f8ae529d690 [ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690 [ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003 [ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000 [ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002 [ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000 [ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf [ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83 c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02 00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1 [ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0 [ 690.690636] CR2: 0000000000000000 Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_multiq: fix double free on init failureNikolay Aleksandrov
The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501292b ("multiq: Further multiqueue cleanup") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30sch_htb: fix crash on init failureNikolay Aleksandrov
The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: bcm63xx_enet: make bcm_enetsw_ethtool_ops constBhumika Goyal
Make this const as it is never modified. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200"Ahmed Abdelsalam
IPv6 packet may carry more than one extension header, and IPv6 nodes must accept and attempt to process extension headers in any order and occurring any number of times in the same packet. Hence, there should be no assumption that Segment Routing extension header is to appear immediately after the IPv6 header. Moreover, section 4.1 of RFC 8200 gives a recommendation on the order of appearance of those extension headers within an IPv6 packet. According to this recommendation, Segment Routing extension header should appear after Hop-by-Hop and Destination Options headers (if they present). This patch fixes the get_srh(), so it gets the segment routing header regardless of its position in the chain of the extension headers in IPv6 packet, and makes sure that the IPv6 routing extension header is of Type 4. Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com> Acked-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 18:28:48 +0000