summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-07pinctrl: move gpio-axp209 to pinctrlQuentin Schulz
To prepare the driver for the upcoming pinctrl features, move the GPIO driver AXP209 from GPIO to pinctrl subsystem. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07gpio: axp209: switch unsigned variables to unsigned intQuentin Schulz
Checkpatch complains with the following message: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Let's make it happy by switching over to unsigned int. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ftgpio010: Fix platform_get_irq's error checkingArvind Yadav
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: aspeed: Add support for reset toleranceAndrew Jeffery
Use the new pinconf parameter for state persistence to expose the associated capability of the Aspeed GPIO controller. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpiolib: Generalise state persistence beyond sleepAndrew Jeffery
General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpio-stmpe: make various char arrays static const, shrinks object sizeColin Ian King
Don't populate the read-only arrays edge_det_values, rise_values and fall_values on the stack but instead make them static and constify them. Makes the object code smaller by over 240 bytes: Before: text data bss dec hex filename 9525 2520 192 12237 2fcd drivers/gpio/gpio-stmpe.o After: text data bss dec hex filename 9025 2776 192 11993 2ed9 drivers/gpio/gpio-stmpe.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: it87: fix mojibake in module metadataAdam Borowski
It had twice-encoded Unicode. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02MAINTAINERS: add myself as reviewer for gpio-mockupBartosz Golaszewski
The user space libgpiod project is now tightly coupled with the gpio-mockup module, so let me know when any changes to it are being proposed. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: add helpers for accessing the gpio rangesBartosz Golaszewski
In order to avoid repeating the calculations on every access - add helpers for gpio base and ngpio components of the ranges array. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: rename gpio_mockup_params_nr to gpio_mockup_num_rangesBartosz Golaszewski
This variable holds the number of mockup GPIO ranges so rename it accordingly. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: modify the return value check for devm_irq_sim_init()Bartosz Golaszewski
As discussed with Marc Zyngier: irq_sim_init() and its devres variant should return the base of the allocated interrupt range on success rather than 0. This will be modified later - first, change the way users handle the return value of these routines. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_set_multiple()Bartosz Golaszewski
Implement the set_multiple() callback and register it with the gpiolib framework. This is only meant to also test the internal kernel API. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: tweak line breaksBartosz Golaszewski
Minor readability tweak: prefer breaking the lines in a way where the second part is longer than the first. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify that ngpio > 0Bartosz Golaszewski
Improve the module params sanitization: bail out from init if the user tries to pass a non-positive number of GPIO lines for any mockup chip. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: fix debugfs handlingBartosz Golaszewski
The debugfs routines returning pointers can return NULL or error codes embedded with ERR_PTR(). Check the return values with IS_ERR_OR_NULL(). While we're at it: make the error message more specific so it's not confused with the one emitted when the top-level gpio-mockup debugfs directory creation fails. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: group code by logicBartosz Golaszewski
Keep GPIO chip callbacks, event trigger callbacks and mockup chip setup code visibly separated. We're mostly good - just need to move the line naming routine below. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: change the type of value field in line state structBartosz Golaszewski
GPIO values are universally represented as integers. Change the type of the variable storing the current line value to int for consistency. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: extend the debugfs layoutBartosz Golaszewski
Currently each chip has a dedicated directory in debugfs for event triggers. We use the chip's label for the directory name, but the user can't really associate these directories with chip names without parsing the relevant sysfs entries. Use chip names for directory names. For backward compatibility: create links pointing to the actual directories named using the chip labels. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: pass the named_lines parameter over platform_dataBartosz Golaszewski
Move the last bits of code dealing with module parameters to the init function. Add a new variable to platform data, which indicates to the probe function if it should name the GPIO lines. If we ever want to make the line naming more fine-grained (e.g. per chip switch) it will be easier this way. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: merge gpio_mockup_add() into gpio_mockup_probe()Bartosz Golaszewski
Now that the probe() function only does what is should, there's no need to split the chip adding logic into a separate routine. Merge gpio_mockup_add() into gpio_mockup_probe(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: remove a stray tabBartosz Golaszewski
Minor coding style fix. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_err()Bartosz Golaszewski
Visually shrink the pr_err() calls by encapsulating adding the module name prefix to the message in a macro. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: rework device probingBartosz Golaszewski
We currently create a single platform device in init and then parse the configuration passed to us via module parameters in probe() before creating GPIO chips and registering them with the gpiolib framework. The relation between platform devices and mockup chips should be 1:1. Create a separate platform device for each mockup chip using convenient helpers (platform_device_register_resndata()). Pass a platform data structure to probe() in which the configuration (GPIO base, number of lines, chip index) extracted from the module params is stored. Make probe() create a single mockup chip for every platform device. This approach has several advantages: - we only parse the module parameters in init() and can bail out before attaching any device if the input is invalid (currently we would have to examine kernel logs), - we'll get notified by the device framework about errors in probe() for specific chips, - probe() gets simplified and only does what it's supposed to. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify the number of GPIO chips requestedBartosz Golaszewski
The number of supported mockup chips is limited. Check this limit when parsing the module parameters. Also: make sure that each chip is described with a <base - ngpio> pair. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: parse the module params in init, not probeBartosz Golaszewski
If the module parameters are invalid, we should bail out from the init function instead of detecting it during the device probe. That way we don't even allow the user to load the module if we don't accept the arguments. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: add missing prefixesBartosz Golaszewski
Add the gpio_mockup_ prefix to the remaining symbols that still don't have it, so that the entire driver code is consistent. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ath79: add missing MODULE_DESCRIPTION/LICENSEJesse Chan
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpio: Clarify that <linux/gpio.h> is legacyLinus Walleij
It should be clear to developers that they should not include this file in new code. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30Merge branch 'ib-gpio-acpi-quirks' into develLinus Walleij
2017-11-30gpio: omap: initialize gpioirq chip as part of gpiochip_add_dataGrygorii Strashko
Hence, series from Thierry Reding [1] merged - the OMAP GPIO driver can be switched to reuse new feature and just fill new struct gpio_irq_chip before calling gpiochip_add_data() instead of using few separate gpioirq chip APIs. gpiochip_add_data() will do the job and create and initialize gpioirq chip [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1531592.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: don't allow OPEN_DRAIN & OPEN_SOURCE flags simultaneouslyBartosz Golaszewski
Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Introduce NO_RESTRICTION quirkAndy Shevchenko
Allow to relax IoRestriction for certain cases. One of the use case is incorrectly cooked ACPI table where interrupt pin is defined with GpioIo() macro with IoRestrictionOutputOnly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Add quirks field to struct acpi_gpio_mappingAndy Shevchenko
Some broken ACPI tables might require quirks in the OS. Introduce quirks field in struct acpi_gpio_mapping. Propagate them to struct acpi_gpio_info for further use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Consolidate debug output in acpi_gpio_update_gpiod_flags()Andy Shevchenko
We have the duplicated debug strings printed whenever acpi_gpio_update_gpiod_flags() fails. Instead of doing this by callers, move the debug output inside function. In one case convert almost useless pr_debug() to dev_dbg() where actual consumer of GPIO resource is disclosed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Move adev member to struct acpi_gpio_infoAndy Shevchenko
The further improvements are based on this change since struct acpi_gpio_lookup is not available in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Don't contaminate return parameter in case of errorAndy Shevchenko
If error occurs, leave lookup parameter untouched. There is no functional change, since all current callers just bail out in case of error without using the assigned pieces. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Assign polarity when call acpi_populate_gpio_lookup()Andy Shevchenko
There is no need, since we preserve firmware settings, to override polarity for GpioInt() resources. While Documentation/gpio-properties.txt refers to any from GpioIo() / GpioInt() resources, the active_low flag has been introduced to fill the gap only for GpioIo() which lacks of that information. Moreover, in case of GpioInt() existed solution was broken anyway, it overrides only in one direction, i.e. from 0 to 1, otherwise it would be still 1 as defined in the resource macro. So, move the assignment to a right place and forbid to (semi-)override polarity for GpioInt() type of resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29gpio: max732x: Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-26Linux 4.15-rc1v4.15-rc1Linus Torvalds
2017-11-26Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
2017-11-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
2017-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ...
2017-11-26Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: a documentation fix, a Sparse warning fix and a debugging fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix task state recording/printout sched/deadline: Don't use dubious signed bitfields sched/deadline: Fix the description of runtime accounting in the documentation
2017-11-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two PMU driver fixes and a memory leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix memory leak triggered by perf --namespace perf/x86/intel/uncore: Add event constraint for BDX PCU perf/x86/intel: Hide TSX events when RTM is not supported
2017-11-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static key fix from Ingo Molnar: "Fix a boot warning related to bad init ordering of the static keys self-test" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Invoke jump_label_test() via early_initcall()
2017-11-26Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes, most of them related to making the UAPI header-syncing warnings easier to read and easier to act upon" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/headers: Sync objtool UAPI header objtool: Fix cross-build objtool: Move kernel headers/code sync check to a script objtool: Move synced files to their original relative locations objtool: Make unreachable annotation inline asms explicitly volatile objtool: Add a comment for the unreachable annotation macros
2017-11-26ARM: BUG if jumping to usermode address in kernel modeRussell King
Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
generated by cgit (git 2.34.1) at 2025-09-23 18:49:00 +0000