summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-07net: qcom/emac: Use proper free methods during TXHemanth Puranik
This patch fixes the warning messages/call traces seen if DMA debug is enabled, In case of fragmented skb's memory was allocated using dma_map_page but freed using dma_unmap_single. This patch modifies buffer allocations in TX path to use dma_map_page in all the places and dma_unmap_page while freeing the buffers. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07qed: Free RoCE ILT Memory on rmmod qedrMichal Kalderon
Rdma requires ILT Memory to be allocated for it's QPs. Each ILT entry points to a page used by several Rdma QPs. To avoid allocating all the memory in advance, the rdma implementation dynamically allocates memory as more QPs are added, however it does not dynamically free the memory. The memory should have been freed on rmmod qedr, but isn't. This patch adds the memory freeing on rmmod qedr (currently it will be freed with qed is removed). An outcome of this bug, is that if qedr is unloaded and loaded without unloaded qed, there will be no more RoCE traffic. The reason these are related, is that the logic of detecting the first QP ever opened is by asking whether ILT memory for RoCE has been allocated. In addition, this patch modifies freeing of the Task context to always use the PROTOCOLID_ROCE and not the protocol passed, this is because task context for iWARP and ROCE both use the ROCE protocol id, as opposed to the connection context. Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-05 This series contains fixes to e1000e only. Benjamin Poirier provides all but one fix in this series, starting with workaround for a VMWare e1000e emulation issue where ICR reads 0x0 on the emulated device. Partially reverted a previous commit dealing with the "Other" interrupt throttling to avoid unforeseen fallout from these changes that are not strictly necessary. Restored the ICS write for receive and transmit queue interrupts in the case that txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixed an bug where interrupts may be missed if ICR is read while INT_ASSERTED is not set, so avoid the problem by setting all bits related to events that can trigger the Other interrupt in IMS. Fixed the return value for check_for_link() when auto-negotiation is off. Pierre-Yves Kerbrat fixes e1000e to use dma_zalloc_coherent() to make sure the ring is memset to 0 to prevent the area from containing garbage. v2: added an additional e1000e fix to the series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07PCI: dwc: Fix enumeration end when reaching root subordinateKoen Vandeputte
The subordinate value indicates the highest bus number which can be reached downstream though a certain device. Commit a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") ensures that downstream devices cannot assign busnumbers higher than the upstream device subordinate number, which was indeed illogical. By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a value of 0x01. Due to this combined with above commit, enumeration stops digging deeper downstream as soon as bus num 0x01 has been assigned, which is always the case for a bridge device. This results in all devices behind a bridge bus remaining undetected, as these would be connected to bus 0x02 or higher. Fix this by initializing the RC to a subordinate value of 0xff, which is not altering hardware behaviour in any way, but informs probing function pci_scan_bridge() later on which reads this value back from register. The following nasty errors during boot are also fixed by this: pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01]) ... pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01]) pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01] Fixes: a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") Tested-by: Niklas Cassel <niklas.cassel@axis.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Cc: stable@vger.kernel.org # v4.15+ Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2018-03-07net: usbnet: fix potential deadlock on 32bit hostsEric Dumazet
Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07sch_netem: fix skb leak in netem_enqueue()Alexey Kodanev
When we exceed current packets limit and we have more than one segment in the list returned by skb_gso_segment(), netem drops only the first one, skipping the rest, hence kmemleak reports: unreferenced object 0xffff880b5d23b600 (size 1024): comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s) hex dump (first 32 bytes): 00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d8a19b9d>] __alloc_skb+0xc9/0x520 [<000000001709b32f>] skb_segment+0x8c8/0x3710 [<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830 [<00000000c921cba1>] inet_gso_segment+0x476/0x1370 [<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510 [<000000002182660a>] __skb_gso_segment+0x1dd/0x620 [<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem] [<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120 [<00000000fc5f7327>] ip_finish_output2+0x998/0xf00 [<00000000d309e9d3>] ip_output+0x1aa/0x2c0 [<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670 [<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0 [<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540 [<0000000013d06d02>] tasklet_action+0x1ca/0x250 [<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3 [<00000000e7ed027c>] irq_exit+0x1e2/0x210 Fix it by adding the rest of the segments, if any, to skb 'to_free' list. Add new __qdisc_drop_all() and qdisc_drop_all() functions because they can be useful in the future if we need to drop segmented GSO packets in other places. Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2018-03-05 Here are a few more Bluetooth fixes for the 4.16 kernel: - btusb: reset/resume fixes for Yoga 920 and Dell OptiPlex 3060 - Fix for missing encryption refresh with the Security Manager protocol ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07fsl/fman: avoid sleeping in atomic context while adding an addressDenis Kirjanov
__dev_mc_add grabs an adress spinlock so use atomic context in kmalloc. / # ifconfig eth0 inet 192.168.0.111 [ 89.331622] BUG: sleeping function called from invalid context at mm/slab.h:420 [ 89.339002] in_atomic(): 1, irqs_disabled(): 0, pid: 1035, name: ifconfig [ 89.345799] 2 locks held by ifconfig/1035: [ 89.349908] #0: (rtnl_mutex){+.+.}, at: [<(ptrval)>] devinet_ioctl+0xc0/0x8a0 [ 89.357258] #1: (_xmit_ETHER){+...}, at: [<(ptrval)>] __dev_mc_add+0x28/0x80 [ 89.364520] CPU: 1 PID: 1035 Comm: ifconfig Not tainted 4.16.0-rc3-dirty #8 [ 89.371464] Call Trace: [ 89.373908] [e959db60] [c066f948] dump_stack+0xa4/0xfc (unreliable) [ 89.380177] [e959db80] [c00671d8] ___might_sleep+0x248/0x280 [ 89.385833] [e959dba0] [c01aec34] kmem_cache_alloc_trace+0x174/0x320 [ 89.392179] [e959dbd0] [c04ab920] dtsec_add_hash_mac_address+0x130/0x240 [ 89.398874] [e959dc00] [c04a9d74] set_multi+0x174/0x1b0 [ 89.404093] [e959dc30] [c04afb68] dpaa_set_rx_mode+0x68/0xe0 [ 89.409745] [e959dc40] [c057baf8] __dev_mc_add+0x58/0x80 [ 89.415052] [e959dc60] [c060fd64] igmp_group_added+0x164/0x190 [ 89.420878] [e959dca0] [c060ffa8] ip_mc_inc_group+0x218/0x460 [ 89.426617] [e959dce0] [c06120fc] ip_mc_up+0x3c/0x190 [ 89.431662] [e959dd10] [c0607270] inetdev_event+0x250/0x620 [ 89.437227] [e959dd50] [c005f190] notifier_call_chain+0x80/0xf0 [ 89.443138] [e959dd80] [c0573a74] __dev_notify_flags+0x54/0xf0 [ 89.448964] [e959dda0] [c05743f8] dev_change_flags+0x48/0x60 [ 89.454615] [e959ddc0] [c0606744] devinet_ioctl+0x544/0x8a0 [ 89.460180] [e959de10] [c060987c] inet_ioctl+0x9c/0x1f0 [ 89.465400] [e959de80] [c05479a8] sock_ioctl+0x168/0x460 [ 89.470708] [e959ded0] [c01cf3ec] do_vfs_ioctl+0xac/0x8c0 [ 89.476099] [e959df20] [c01cfc40] SyS_ioctl+0x40/0xc0 [ 89.481147] [e959df40] [c0011318] ret_from_syscall+0x0/0x3c [ 89.486715] --- interrupt: c01 at 0x1006943c [ 89.486715] LR = 0x100c45ec Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07Merge branch 'rhltable-dups'David S. Miller
Paul Blakey says: ==================== rhashtable: Fix rhltable duplicates insertion On our mlx5 driver fs_core.c, we use the rhltable interface to store flow groups. We noticed that sometimes we get a warning that flow group isn't found at removal. This rare case was caused when a specific scenario happened, insertion of a flow group with a similar match criteria (a duplicate), but only where the flow group rhash_head was second (or not first) on the relevant rhashtable bucket list. The first patch fixes it, and the second one adds a test that show it is now working. Paul. v3 --> v2 changes: * added missing fix in rhashtable_lookup_one code path as well. v1 --> v2 changes: * Changed commit messages to better reflect the change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07test_rhashtable: add test case for rhltable with duplicate objectsPaul Blakey
Tries to insert duplicates in the middle of bucket's chain: bucket 1: [[val 21 (tid=1)]] -> [[ val 1 (tid=2), val 1 (tid=0) ]] Reuses tid to distinguish the elements insertion order. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07rhashtable: Fix rhlist duplicates insertionPaul Blakey
When inserting duplicate objects (those with the same key), current rhlist implementation messes up the chain pointers by updating the bucket pointer instead of prev next pointer to the newly inserted node. This causes missing elements on removal and travesal. Fix that by properly updating pprev pointer to point to the correct rhash_head next pointer. Issue: 1241076 Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7 Fixes: ca26893f05e8 ('rhashtable: Add rhlist interface') Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07dt-bindings: net: renesas-ravb: Make stream buffer optionalGeert Uytterhoeven
The Stream Buffer for EtherAVB-IF (STBE) is an optional component, and is not present on all SoCs. Document this in the DT bindings, including a list of SoCs that do have it. Fixes: 785ec87483d1e24a ("ravb: document R8A77970 bindings") Fixes: f231c4178a655b09 ("dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07Merge remote-tracking branches 'regulator/fix/resume' and ↵Mark Brown
'regulator/fix/stm32-vfrefbuf' into regulator-linus
2018-03-07brcmfmac: fix P2P_DEVICE ethernet address generationArend Van Spriel
The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-07brcmfmac: add possibility to obtain firmware errorArend Van Spriel
The feature module needs to evaluate the actual firmware error return upon a control command. This adds a flag to struct brcmf_if that the caller can set. This flag is checked to determine the error code that needs to be returned. Fixes: b69c1df47281 ("brcmfmac: separate firmware errors from i/o errors") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Select RCCLK on init()Hans de Goede
When the BYT_RT5651_MCLK_EN quirk is set, we disable the MCLK from byt_rt5651_init(), we need to select the RCCLK as sysclk before doing this to make sure that jack-detect works directly after boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog micsHans de Goede
Change the default quirk settings to enable jack-detect, analog mics. The old default input mapping of DMIC for non Bay Trail CR devices seems like a poor default as I'm not aware of any Intel SST + rt5651 using devices with a DMIC. All Cherry Trail devices using the bytcr_rt5651 machine driver seem to be modelled after BYT-CR devices, And the only non CR Bay Trail devices with a rt5651 codec I'm aware of are the Minnow boards for which we already have board specific quirks. So it seems better to me to use the BYT-CR defaults everywhere. This e.g. makes the Chuwi Hi8 Pro (CWI513) work ootb without needing a quirk. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptopHans de Goede
Add a quirk setting up jack-detect and input routing for the VIOS LTH17 laptop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boardsHans de Goede
Despite its name being prefixed with bytcr, before this commit the bytcr_rt5651 machine driver could not work with Bay Trail CR boards, as those only have SSP0 and it only supported SSP0-AIF1 setups. This commit adds support for this, autodetecting AIF1 vs AIF2 based on BIOS tables. While at it also add support for SSP2-AIF2 setups, as that requires only minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support. Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into merging the 2 machine drivers into 1 to avoid copy-pasting, but there are enough subtile differences to make this hard *and* with all the quirks the machine driver already is full with if (variant-foo) then ... else ... constructs adding more of these is going to make the code unreadable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using itHans de Goede
Add a new IN2_HS_IN3 input map and add a quirk for the input mapping and jack-detect source for the Chuwi Vi8 Plus tablet, which uses this new map. Note the Chuwi Vi8 Plus lists an extra GPIO in its codecs ACPI resources which needs to be driven high to enable the external speaker amplifier, this is not supported yet and will be fixed in a future patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAPHans de Goede
All the mappings are named for where the internal mic is routed and in that sense the newly added in3_map really is the same as in1_map, what makes it different is that it maps the headset mic at IN3 rather then at IN2. Rename in3_map to in1_hs_in3_map to better reflect what it actually does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() callHans de Goede
Drop the snd_soc_dai_set_bclk_ratio() call, the rt5651 dai does not have a set_bclk_ratio() op, so it is a nop (and returns -EINVAL). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Configure PLL1 before using itHans de Goede
When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL registers have not been setup yet and we effectively have an invalid clock configuration until byt_rt5651_aif1_hw_params() gets called. Add a new byt_rt5651_prepare_and_enable_pll1() helper and use that from both platform_clock_control() and byt_rt5651_aif1_hw_params() to fix this. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configurationHans de Goede
Add support for setting the micbias OVCD limits device-properties through quirks. And set the limits for this to 2000uA with a scale-factor of 0.75 for the KIANO SlimNote 14.2 device, which is the only device on which jack-detection is currently enabled. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect sourceHans de Goede
Only create the jack if we have a valid jack-detect source and properly check the snd_soc_component_set_jack() return value. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specifiedHans de Goede
Before this commit it was possible to set the DMIC_EN quirk in the machine driver, but it would never be passed to the codec driver so it was a nop. This commit adds code to actually pass the quirk to the codec driver. Since the DMIC_EN quirk was ignored before, this commit removes it from the default quirk settings, to avoid this causing an unexpected functional change. If we really want the DMIC_EN behavior anywhere it should be specifically enabled by follow up commits. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-propertiesHans de Goede
This commit add support for a new BYT_RT5651_JDSRC quirk, sets this quirk for the KIANO SlimNote 14.2 laptop and uses the new "realtek, jack-detect-source" property to pass this info to the codec driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07Merge branch 'topic/rt5651' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-03-07fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in ↵Peter Malone
sbusfb_ioctl_helper(). Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper(). 'index' is defined as an int in sbusfb_ioctl_helper(). We retrieve this from the user: if (get_user(index, &c->index) || __get_user(count, &c->count) || __get_user(ured, &c->red) || __get_user(ugreen, &c->green) || __get_user(ublue, &c->blue)) return -EFAULT; and then we use 'index' in the following way: red = cmap->red[index + i] >> 8; green = cmap->green[index + i] >> 8; blue = cmap->blue[index + i] >> 8; This is a classic information leak vulnerability. 'index' should be an unsigned int, given its usage above. This patch is straight-forward; it changes 'index' to unsigned int in two switch-cases: FBIOGETCMAP_SPARC && FBIOPUTCMAP_SPARC. This patch fixes CVE-2018-6412. Signed-off-by: Peter Malone <peter.malone@gmail.com> Acked-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-07Merge tag 'v4.16-rc4' of ↵Bartlomiej Zolnierkiewicz
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next Linux 4.16-rc4
2018-03-07ASoC: Intel: bytcr_rt5651: Not being able to find the codec ACPI-dev is an errorHans de Goede
If we cannot find the codec ACPI-dev, then the snd-soc-core will not be able to find the codec either and snd_soc_register_card() will just keep exiting with -EPROBE_DEFER, filling the log with errors each time the probe gets retried. Instead simply log an error from the machine driver and exit with -ENODEV. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Rewrite jack-type detectionHans de Goede
We get the insertion event before the jack is fully inserted at which point the second ring on a TRRS connector may short the 2nd ring and sleeve contacts. Testing has shown that this short-circuit may happen as late as 500ms after the insertion event, but it never lasts longer then 300ms. This commit changes the detection algorithm to require 5 identical OVCD values in a row at 100 ms intervals to fix the jack-type sometimes getting mis-detected. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Add rt5651_jack_inserted() helperHans de Goede
Add rt5651_jack_inserted() helper to get the jack-detect switch status, This is a preparation patch for rewriting the jack type-detection to make it more reliable. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Enable Platform Clock during jack-type detectHans de Goede
When using RCCLK instead of MCLK / PLL1 the OVCD status often gets stuck at its last value, which breaks jack-type detection. This commit fixes this by force-enabling the platform clock when doing jack-type detection. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Enable sticky mode for OVCDHans de Goede
When the mic-gnd contacts are short-circuited by a headphones plug, the hardware periodically retries if it can apply the bias-current leading to the OVCD status flip-flopping 1-0-1 with it being 0 about 10% of the time. This commit enables the sticky bit for the OVCD status to deal with this. This commit also introduces 2 helper functions to deal with the OVCD status bit, this may seem a bit overkill now, but these will also be used in future patches. Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Allow specifying the OVCD scale-factor through a device-propertyHans de Goede
OVer-Current-Detection (OVCD) for the micbias current is used to detect if an inserted jack is a headset or headphones (mic shorted to ground). The threshold for at which current the OVCD triggers on the rt5651 is not only controlled by setting the absolute current limit, but also by setting a scale factor which applies to the limit. Testing has shown that we need to set both (depending on the board). This commit adds support for the sofar unused OVCD scale-factor register and adds support for specifying non-default values for it through the "realtek,over-current-scale-factor" device-property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Allow specifying over-current threshold through a device-propertyHans de Goede
OVer-Current-Detection (OVCD) for the micbias current is used to detect if an inserted jack is a headset or headphones (mic shorted to ground). Some boards may need different values for the OVCD current threshold because of a resistor on the board in serial with or parallel to the jack mic contact. This commit adds support for configuring the OCVD current threshold through the "realtek,over-current-threshold-microamp" device-property. Note this commit changes the default value from 600uA to 2000uA, because testing has shown 600uA to be a poor default. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Configure jack-detect source through a device-propertyHans de Goede
Configure the jack-detect source through a device-property which can be set by code outside of the codec driver. Rather then putting platform specific DMI quirks inside the generic codec driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Add devicetree-bindings for jack-detectHans de Goede
Add new properties to the rt5651 dt-bindings for configuring the jack-detect source and over-current detect settings. Cc: devicetree@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ASoC: rt5651: Make rt5651_apply_properties() privateHans de Goede
The idea behind exporting rt5651_apply_properties(), was for it to be used on platforms where the platform code may need to add device-properties, rather then relying only on properties set by the firmware. The platform code could then call rt5651_apply_properties() after adding properties to make sure that the codec driver was aware of the new properties. But this is not necessary, as long as we do all property parsing from the codec component-driver's probe function (or later) then the machine driver can attach properties before calling snd_soc_register_card and calling rt5651_apply_properties() for ordering reasons is not necessary. This commit makes rt5651_apply_properties() private and adds 2 comments documenting that all property parsing must be done from the codec component-driver's probe function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07ovl: update Kconfig textsMiklos Szeredi
Add some hints about overlayfs kernel config options. Enabling NFS export by default is especially recommended against, as it incurs a performance penalty even if the filesystem is not actually exported. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-07Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"Christoph Hellwig
This reverts commit e9a48034d7d1318ece7d4a235838a86c94db9d68. The slaves and holders link for the hidden gendisks confuse lsblk so that it errors out on, or doesn't report the nvme multipath devices. Given that we don't need holder relationships for something that can't even be directly accessed we should just stop creating those links. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-07xfrm: Verify MAC header exists before overwriting eth_hdr(skb)->h_protoYossi Kuperman
Artem Savkov reported that commit 5efec5c655dd leads to a packet loss under IPSec configuration. It appears that his setup consists of a TUN device, which does not have a MAC header. Make sure MAC header exists. Note: TUN device sets a MAC header pointer, although it does not have one. Fixes: 5efec5c655dd ("xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version") Reported-by: Artem Savkov <artem.savkov@gmail.com> Tested-by: Artem Savkov <artem.savkov@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-03-07Merge tag 'perf-urgent-for-mingo-4.16-20180306' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Be more robust when drawing arrows in the annotation TUI, avoiding a segfault when jump instructions have as a target addresses in functions other that the one currently being annotated. The full fix will come in the following days, when jumping to other functions will work as call instructions (Arnaldo Carvalho de Melo) - Prevent auxtrace_queues__process_index() from queuing AUX area data for decoding when the --no-itrace option has been used (Adrian Hunter) - Sync copy of kvm UAPI headers and x86's cpufeatures.h (Arnaldo Carvalho de Melo) - Fix 'perf stat' CSV output format for non-supported counters (Ilya Pronin) - Fix crash in 'perf record|perf report' pipe mode (Jiri Olsa) - Fix annoying 'perf top' overwrite fallback message on older kernels (Kan Liang) - Fix the usage on the 'perf kallsyms' man page (Sangwon Hong) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/entry/64/compat: Save one instruction in entry_INT80_compat()Dominik Brodowski
As %rdi is never user except in the following push, there is no need to restore %rdi to the original value. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/entry: Do not special-case clone(2) in compat entryDominik Brodowski
With the CPU renaming registers on its own, and all the overhead of the syscall entry/exit, it is doubtful whether the compiled output of mov %r8, %rax mov %rcx, %r8 mov %rax, %rcx jmpq sys_clone is measurably slower than the hand-crafted version of xchg %r8, %rcx So get rid of this special case. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscallsDominik Brodowski
While at it, convert declarations of type "unsigned" to "unsigned int". Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls: Use proper syscall definition for sys_ioperm()Dominik Brodowski
Using SYSCALL_DEFINEx() is recommended, so use it also here. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/entry: Remove stale syscall prototypeDominik Brodowski
sys32_vm86_warning() is long gone. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07x86/syscalls/32: Simplify $entry == $compat entriesDominik Brodowski
If the compat entry point is equivalent to the native entry point, it does not need to be specified explicitly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@amacapital.net Cc: viro@zeniv.linux.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 08:38:43 +0000