| Age | Commit message (Collapse) | Author |
|---|
|
Performing a dummy read ensures that the register write operation is fully
completed, mitigating any potential bus delays that could otherwise impact
the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to
control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application
sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on
a delay function to ensure the clock frequency does not exceed 1 MHz.
However, this can lead to rapid toggling of the GPIO because the write
operation is POSTed and does not wait for a bus acknowledgment.
Fixes: 361b79119a4b ("gpio: Add Aspeed driver")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On PTL platforms with media version 30.00, the fuse registers for
reporting L3 bank availability to the GT just read out as ~0 and do not
provide proper values. Xe does not use the L3 bank mask for anything
internally; it only passes the mask through to userspace via the GT
topology query.
Since we don't have any way to get the real L3 bank mask, we don't want
to pass garbage to userspace. Passing a zeroed mask or a copy of the
primary GT's L3 bank mask would also be inaccurate and likely to cause
confusion for userspace. The best approach is to simply not include L3
in the list of masks returned by the topology query in cases where we
aren't able to provide a meaningful value. This won't change the
behavior for any existing platforms (where we can always obtain L3 masks
successfully for all GTs), it will only prevent us from mis-reporting
bad information on upcoming platform(s).
There's a good chance this will become a formal workaround in the
future, but for now we don't have a lineage number so "no_media_l3" is
used in place of a lineage as the OOB workaround descriptor.
v2:
- Re-calculate query size to properly match data returned. (Gustavo)
- Update kerneldoc to clarify that the L3bank mask may not be included
in the query results if the hardware doesn't make it available.
(Gustavo)
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007154143.2021124-2-matthew.d.roper@intel.com
|
|
Make sure to always set the GEM function pointer even for in kernel
allocations. This fixes a NULL pointer deref caused by switching to GEM
references.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: fd69ef05029f ("drm/radeon: use GEM references instead of TTMs")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"build failure after merge of the amdgpu tree"
dm_suspend/dm_resume functions argument mismatch
not caught in validation as it was under config
CONFIG_DEBUG_KERNEL_DC which wasnt enabled by
default.
Change argument from adev to ip_block.
Fixes: 982d7f9bfe4a ("drm/amdgpu: update the handle ptr in suspend")
Fixes: 7feb4f3ad8be ("drm/amdgpu: update the handle ptr in resume")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to log error in multi ring write as its taken
care during ring commit.
This is inline with change done in amdgpu_ring_write.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the error message from ring write as an optimization
to avoid printing that message on every write instead
print once during commit if it exceeds write the allocated
size i.e ring->count_dw.
Also we do not want to log the error message in between a
ring write and complete the write as its mostly not harmful
as it will overwrite stale data only as GPU read from ring
is faster than CPU write to ring.
This reduces the size of amdgpu.ko module by around
600 Kb as write is very often used function and hence
the print.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix typos in comments: "wether -> whether".
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While loop makes it sound like amdgpu_vmid_grab() potentially needs to be
called multiple times to produce a fence, while in reality all code paths
either return an error, assign a valid job->vmid or assign a vmid which
will be valid once the returned fence signals.
Therefore we can remove the loop to make it clear the call does not need
to be repeated.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fence has been initialised to NULL so no need to test it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These parts were mainly for compute workloads, but they have
a display that was available for the console. These chips
should support SG display, but I don't know that the support
was ever validated on Linux so disable it by default. It can
still be enabled by setting sg_display=1 for those that
want to play with it. These systems also generally had large
carve outs so SG display was less of a factor.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3356
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert fdinfo memory stats to use the common drm_print_memory_stats
helper.
This achieves alignment with the common keys as documented in
drm-usage-stats.rst, adding specifically drm-total- key the driver was
missing until now.
Additionally I made the code stop skipping total size for objects which
currently do not have a backing store, and I added resident, active and
purgeable reporting.
Legacy keys have been preserved, with the outlook of only potentially
removing only the drm-memory- when the time gets right.
The example output now looks like this:
pos: 0
flags: 02100002
mnt_id: 24
ino: 1239
drm-driver: amdgpu
drm-client-id: 4
drm-pdev: 0000:04:00.0
pasid: 32771
drm-total-cpu: 0
drm-shared-cpu: 0
drm-active-cpu: 0
drm-resident-cpu: 0
drm-purgeable-cpu: 0
drm-total-gtt: 2392 KiB
drm-shared-gtt: 0
drm-active-gtt: 0
drm-resident-gtt: 2392 KiB
drm-purgeable-gtt: 0
drm-total-vram: 44564 KiB
drm-shared-vram: 31952 KiB
drm-active-vram: 0
drm-resident-vram: 44564 KiB
drm-purgeable-vram: 0
drm-memory-vram: 44564 KiB
drm-memory-gtt: 2392 KiB
drm-memory-cpu: 0 KiB
amd-memory-visible-vram: 44564 KiB
amd-evicted-vram: 0 KiB
amd-evicted-visible-vram: 0 KiB
amd-requested-vram: 44564 KiB
amd-requested-visible-vram: 11952 KiB
amd-requested-gtt: 2392 KiB
drm-engine-compute: 46464671 ns
v2:
* Track purgeable via AMDGPU_GEM_CREATE_DISCARDABLE.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fence argument is unused so lets drop it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The current implementation does not work for widgets of DAPMs without
component, as snd_soc_dapm_to_component() requires it. If the widget is
directly owned by the card, e.g. as it is the case for the tegra
implementation, the call leads to UB. Therefore directly access the
component of the widget's DAPM to be able to check if a component is
available.
Fixes: f82eb06a40c8 ("ASoC: tegra: machine: Handle component name prefix")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://patch.msgid.link/20241008-tegra-dapm-v2-1-5e999cb5f0e7@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-3-ymaman@nvidia.com
|
|
When `nouveau_dmem_copy_one` is called, the following error occurs:
[272146.675156] nouveau 0000:06:00.0: fifo: PBDMA9: 00000004 [HCE_PRIV]
ch 1 00000300 00003386
This indicates that a copy push command triggered a Host Copy Engine
Privileged error on channel 1 (Copy Engine channel). To address this
issue, modify the Copy Engine channel to allow privileged push commands
Fixes: 6de125383a5c ("drm/nouveau/fifo: expose runlist topology info on all chipsets")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-2-ymaman@nvidia.com
|
|
If traffic is over vlan, cma_validate_port() fails to match vlan
net_device ifindex with bound_if_index and results in ENODEV error.
It is because rdma_copy_src_l2_addr() always assigns bound_if_index with
real net_device ifindex.
This patch fixes the issue by assigning bound_if_index with vlan
net_device index if traffic is over vlan.
Fixes: f8ef1be816bf ("RDMA/cma: Avoid GID lookups on iWARP devices")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241008114334.146702-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Prior to commit 70ed7238297f ("KVM: arm64: Sanitise ID_AA64MMFR3_EL1")
we just exposed the santised view of ID_AA64MMFR3_EL1 to guests, meaning
that they saw both TCRX and S1PIE if present on the host machine. That
commit added VMM control over the contents of the register and exposed
S1POE but removed S1PIE, meaning that the extension is no longer visible
to guests. Reenable support for S1PIE with VMM control.
Fixes: 70ed7238297f ("KVM: arm64: Sanitise ID_AA64MMFR3_EL1")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20241005-kvm-arm64-fix-s1pie-v1-1-5901f02de749@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Darrick J. Wong <djwong@kernel.org> says:
This patchset fixes multiple data corruption bugs in the fallocate
unshare range implementation for fsdax.
* patches from https://lore.kernel.org/r/172796813251.1131942.12184885574609980777.stgit@frogsfrogsfrogs:
fsdax: dax_unshare_iter needs to copy entire blocks
fsdax: remove zeroing code from dax_unshare_iter
iomap: share iomap_unshare_iter predicate code with fsdax
xfs: don't allocate COW extents when unsharing a hole
Link: https://lore.kernel.org/r/172796813251.1131942.12184885574609980777.stgit@frogsfrogsfrogs
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 9ee3f0d8c999 ("ASOC: SOF: Intel: hda-loader: only wait for
HDaudio IOC for IPC4 devices") removed DMA wait for IPC3 case.
Proceed and remove the wait for IPC4 devices as well.
There is no dependency to IPC version in the load logic and
checking the firmware status is a sufficient check in case of
errors.
The removed code also had a bug in that -ETIMEDOUT is returned
without stopping the DMA transfer.
Cc: stable@vger.kernel.org
Link: https://github.com/thesofproject/linux/issues/5135
Fixes: 9ee3f0d8c999 ("ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices")
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241008060710.15409-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Incorrect SRAM base addr for acp7.0 platform results firmware boot
failure.
Add condition check to support SRAM addr for various platforms.
Fixes: 145d7e5ae8f4 ("ASoC: SOF: amd: add option to use sram for data bin loading")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241008091347.594378-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dev_err to print ACP_SHA_DSP_FW_QUALIFIER and ACP_SHA_PSP_ACK
register values for PSP firmware validation failure case.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241008091347.594378-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Function snd_pcm_period_elapsed() is part of sequence servicing HDAudio
stream IRQs. It's called under Global Interrupt Enable (GIE) disabled -
no HDAudio interrupts will be raised. At the same time, the function may
end up calling __snd_pcm_xrun() or snd_pcm_drain_done(). On the
avs-driver side, this translates to IPCs and as GIE is disabled, these
will never complete successfully.
Improve system stability by scheduling stream-IRQ handling in a separate
thread.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20241008083758.756578-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There's been a decent amount of attention around unmaps of nested MMUs,
and TLBI handling is no exception to this. Add a comment clarifying why
it is safe to reschedule during a TLBI unmap, even without a reference
on the MMU in progress.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-5-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently, when a nested MMU is repurposed for some other MMU context,
KVM unmaps everything during vcpu_load() while holding the MMU lock for
write. This is quite a performance bottleneck for large nested VMs, as
all vCPU scheduling will spin until the unmap completes.
Start punting the MMU cleanup to a vCPU request, where it is then
possible to periodically release the MMU lock and CPU in the presence of
contention.
Ensure that no vCPU winds up using a stale MMU by tracking the pending
unmap on the S2 MMU itself and requesting an unmap on every vCPU that
finds it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Right now the nested code allows unmap operations on a shadow stage-2 to
block unconditionally. This is wrong in a couple places, such as a
non-blocking MMU notifier or on the back of a sched_in() notifier as
part of shadow MMU recycling.
Carry through whether or not blocking is allowed to
kvm_pgtable_stage2_unmap(). This 'fixes' an issue where stage-2 MMU
reclaim would precipitate a stack overflow from a pile of kvm_sched_in()
callbacks, all trying to recycle a stage-2 MMU.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If a vCPU is scheduling out and not in WFI emulation, it is highly
likely it will get scheduled again soon and reuse the MMU it had before.
Dropping the MMU at vcpu_put() can have some unfortunate consequences,
as the MMU could get reclaimed and used in a different context, forcing
another 'cold start' on an otherwise active MMU.
Avoid that altogether by keeping a reference on the MMU if the vCPU is
scheduling out, ensuring that another vCPU cannot reclaim it while the
current vCPU is away. Since there are more MMUs than vCPUs, this does
not affect the guarantee that an unused MMU is available at any time.
Furthermore, this makes the vcpu->arch.hw_mmu ~stable in preemptible
code, at least for where it matters in the stage-2 abort path. Yes, the
MMU can change across WFI emulation, but there isn't even a use case
where this would matter.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007233028.2236133-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Alex reports that syzkaller has managed to trigger a use-after-free when
tearing down a VM:
BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758
CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119
print_report+0x144/0x7a4 mm/kasan/report.c:377
kasan_report+0xcc/0x128 mm/kasan/report.c:601
__asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409
__fput+0x198/0x71c fs/file_table.c:422
____fput+0x20/0x30 fs/file_table.c:450
task_work_run+0x1cc/0x23c kernel/task_work.c:228
do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50
el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169
el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Upon closer inspection, it appears that we do not properly tear down the
MMIO registration for a vCPU that fails creation late in the game, e.g.
a vCPU w/ the same ID already exists in the VM.
It is important to consider the context of commit that introduced this bug
by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That
change correctly sought to avoid an srcu v. config_lock inversion by
breaking up the vCPU teardown into two parts, one guarded by the
config_lock.
Fix the use-after-free while avoiding lock inversion by adding a
special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe
because failed vCPUs are torn down outside of the config_lock.
Cc: stable@vger.kernel.org
Fixes: f616506754d3 ("KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241007223909.2157336-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/idregs-6.12:
: .
: Make some fields of ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1
: writable from userspace, so that a VMM can influence the
: set of guest-visible features.
:
: - for ID_AA64DFR0_EL1: DoubleLock, WRPs, PMUVer and DebugVer
: are writable (courtesy of Shameer Kolothum)
:
: - for ID_AA64PFR1_EL1: BT, SSBS, CVS2_frac are writable
: (courtesy of Shaoqin Huang)
: .
KVM: selftests: aarch64: Add writable test for ID_AA64PFR1_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR1_EL1
KVM: arm64: Use kvm_has_feat() to check if FEAT_SSBS is advertised to the guest
KVM: arm64: Disable fields that KVM doesn't know how to handle in ID_AA64PFR1_EL1
KVM: arm64: Make the exposed feature bits in AA64DFR0_EL1 writable from userspace
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Jonas Gorski says:
====================
net: dsa: b53: assorted jumbo frame fixes
While investigating the capabilities of BCM63XX's integrated switch and
its DMA engine, I noticed a few issues in b53's jumbo frame code.
Mostly a confusion of MTU vs frame length, but also a few missing cases
for 100M switches.
Tested on BCM63XX and BCM53115 with intel 1G and realtek 1G NICs,
which support MTUs of 9000 or slightly above, but significantly less
than the 9716/9720 supported by BCM53115, so I couldn't verify the
actual maximum frame length.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
====================
Link: https://patch.msgid.link/20241004-b53_jumbo_fixes-v1-0-ce1e54aa7b3c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All modern chips support and need the 10_100 bit set for supporting jumbo
frames on 10/100 ports, so instead of enabling it only for 583XX enable
it for everything except bcm63xx, where the bit is writeable, but does
nothing.
Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds
without the bit set.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While BCM5325/5365 do not support jumbo frames, they do support slightly
oversized frames, so do not error out if requesting a supported MTU for
them.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BCM5325/BCM5365 do not support jumbo frames, so we should not report a
jumbo frame mtu for them. But they do support so called "oversized"
frames up to 1536 bytes long by default, so report an appropriate MTU.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
JMS_MAX_SIZE is the ethernet frame length, not the MTU, which is payload
without ethernet headers.
According to the datasheets maximum supported frame length for most
gigabyte swithes is 9720 bytes, so convert that to the expected MTU when
using VLAN tagged frames.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
JMS_MIN_SIZE is the full ethernet frame length, while mtu is just the
data payload size. Comparing these two meant that mtus between 1500 and
1518 did not trigger enabling jumbo frames.
So instead compare the set mtu ETH_DATA_LEN, which is equal to
JMS_MIN_SIZE - ETH_HLEN - ETH_FCS_LEN;
Also do a check that the requested mtu is actually greater than the
minimum length, else we do not need to enable jumbo frames.
In practice this only introduced a very small range of mtus that did not
work properly. Newer chips allow 2000 byte large frames by default, and
older chips allow 1536 bytes long, which is equivalent to an mtu of
1514. So effectivly only mtus of 1515~1517 were broken.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 86b374d061ee ("netfs: Remove fs/netfs/io.c") did what it said on the
tin, but failed to remove the reference to fs/netfs/io.c from the
documentation, leading to this docs build error:
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 7.3.7 ./fs/netfs/io.c' failed with return code 1
Remove the offending kernel-doc line, making the docs build process a
little happier.
Fixes: 86b374d061ee ("netfs: Remove fs/netfs/io.c")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/874j5nlu86.fsf@trenco.lwn.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Nicolas Pitre says:
====================
fix ti-am65-cpsw-nuss module removal
Fix issues preventing rmmod of ti-am65-cpsw-nuss from working properly.
v3:
- more patch submission minutiae
v2: https://lore.kernel.org/netdev/20241003172105.2712027-2-nico@fluxnic.net/T/
- conform to netdev patch submission customs
- address patch review trivias
v1: https://lore.kernel.org/netdev/20240927025301.1312590-2-nico@fluxnic.net/T/
====================
Link: https://patch.msgid.link/20241004041218.2809774-1-nico@fluxnic.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Usage of devm_alloc_etherdev_mqs() conflicts with
am65_cpsw_nuss_cleanup_ndev() as the same struct net_device instances
get unregistered twice. Switch to alloc_etherdev_mqs() and make sure
am65_cpsw_nuss_cleanup_ndev() unregisters and frees those net_device
instances properly.
With this, it is finally possible to rmmod the driver without oopsing
the kernel.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <roger@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In am65_cpsw_nuss_remove(), move the call to am65_cpsw_unregister_devlink()
after am65_cpsw_nuss_cleanup_ndev() to avoid triggering the
WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET) in
devl_port_unregister(). Makes it coherent with usage in
m65_cpsw_nuss_register_ndevs()'s cleanup path.
Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Included solution with ALC287/CS35L41 did not cover full function, 14
inch code blocked. Forcing output for treble/bass speaker to connection
0x02, setting pin configs for LEDs and re-powering amp and calling
fixups for cs35l41, mute and gpio leds was a working combination to reach
correct behaviour.
Signed-off-by: christoph.plattner <christoph.plattner@gmx.at>
Link: https://patch.msgid.link/20241005173509.1196001-1-christoph.plattner@gmx.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add an optional drm-client-name field to drm fdinfo's output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-3-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Giving the opportunity to userspace to associate a free-form
name with a drm_file struct is helpful for tracking and debugging.
This is similar to the existing DMA_BUF_SET_NAME ioctl.
Access to client_name is protected by a mutex, and the 'clients' debugfs
file has been updated to print it.
Userspace MR to use this ioctl:
https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1428
If the string passed by userspace contains chars that would mess up output
when it's going to be printed (in dmesg, fdinfo, etc), -EINVAL is returned.
A 0-length string is a valid use, and clears the existing name.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-2-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
nlmsg_put() may return a NULL pointer assigned to nlh, which will later
be dereferenced in nlmsg_end().
Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring")
Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007Z
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1726715161-18941-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Driver uses internal data structure to construct WQE frame.
It used avid type as u16 which can accommodate up to 64K AVs.
When outstanding AVID crosses 64K, driver truncates AVID and
hence it uses incorrect AVID to WR. This leads to WR failure
due to invalid AV ID and QP is moved to error state with reason
set to 19 (INVALID AVID). When RDMA CM path is used, this issue
hits QP1 and it is moved to error state
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx".
Fixes: 0ac20faf5d83 ("RDMA/bnxt_re: Reorg the bar mapping")
Link: https://patch.msgid.link/r/1726715161-18941-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch implements HW workaround 14019834836 for display version 30.
v2:
- move Wa 14019834836 to it's own function
- apply only for display version 30
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926064759.1313335-3-jouni.hogander@intel.com
|
|
intel_psr2_sel_fetch_update is already quite long function. Now we are
about to add one more HW workaround. Let's split applying workarounds to
selective update area into a separate function.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926064759.1313335-2-jouni.hogander@intel.com
|
