summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-11Merge tag 'kvm-ppc-fixes-4.15-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fixes for 4.15 Four commits here, including two that were tagged but never merged. Three of them are for the HPT resizing code; two of those fix a user-triggerable use-after-free in the host, and one that fixes stale TLB entries in the guest. The remaining commit fixes a bug causing PR KVM guests under PowerVM to fail to start.
2018-01-11KVM MMU: check pending exception before injecting APFHaozhong Zhang
For example, when two APF's for page ready happen after one exit and the first one becomes pending, the second one will result in #DF. Instead, just handle the second page fault synchronously. Reported-by: Ross Zwisler <zwisler@gmail.com> Message-ID: <CAOxpaSUBf8QoOZQ1p4KfUp0jq76OKfGY4Uxs-Gg8ngReD99xww@mail.gmail.com> Reported-by: Alec Blayne <ab@tevsa.net> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-11drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rateJonathan Liu
It was only checking the divider when determing the closest match if it could not match the requested rate exactly. For a projector connected to an Olimex A20-OLinuXino-LIME using HDMI with a native resolution of 1280x800 and pixel clock of 83.5 MHz, this resulted in 1280x800 mode not being available and the following in dmesg when the kernel is booted with drm.debug=0x3e: [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 810 816 831 0x48 0x5 [drm:drm_mode_prune_invalid] Not using 1280x800 mode: NOCLOCK Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-4-net147@gmail.com
2018-01-11drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rateJonathan Liu
best_div is set to i which corresponds to rate halving when it should be set to j which corresponds to the divider. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-3-net147@gmail.com
2018-01-11drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rateJonathan Liu
It is possible that if there is no exact rate match and "rounded = clk_hw_round_rate(parent, ideal)" gives high enough values (e.g. if rounded is 2 * ideal) that the condition "abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never met and best_parent is never set. This results in req->rate and req->best_parent_rate being assigned 0. To avoid this, we set best_parent to the first calculated rate if it is unset. The sun4i_tmds_calc_divider function already has a similar check. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
2018-01-11drm/i915: Don't adjust priority on an already signaled fenceChris Wilson
When we retire a signaled fence, we free the dependency tree. However, we skip clearing the list so that if we then try to adjust the priority of the signaled fence, we may walk the list of freed dependencies. [ 3083.156757] ================================================================== [ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915] [ 3083.156810] Read of size 8 at addr ffff8806bf20f400 by task Xorg/831 [ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1 [ 3083.156817] Hardware name: Notebook N24_25BU/N24_25BU, BIOS 5.12 02/17/2017 [ 3083.156818] Call Trace: [ 3083.156823] dump_stack+0x5c/0x7a [ 3083.156827] print_address_description+0x6b/0x290 [ 3083.156830] kasan_report+0x28f/0x380 [ 3083.156872] ? execlists_schedule+0x199/0x660 [i915] [ 3083.156914] execlists_schedule+0x199/0x660 [i915] [ 3083.156956] ? intel_crtc_atomic_check+0x146/0x4e0 [i915] [ 3083.156997] ? execlists_submit_request+0xe0/0xe0 [i915] [ 3083.157038] ? i915_vma_misplaced.part.4+0x25/0xb0 [i915] [ 3083.157079] ? __i915_vma_do_pin+0x7c8/0xc80 [i915] [ 3083.157121] ? intel_atomic_state_alloc+0x44/0x60 [i915] [ 3083.157130] ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper] [ 3083.157145] ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157159] ? drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157172] ? drm_ioctl+0x45b/0x560 [drm] [ 3083.157211] i915_gem_object_wait_priority+0x14c/0x2c0 [i915] [ 3083.157251] ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915] [ 3083.157290] ? i915_vma_pin_fence+0x1d8/0x320 [i915] [ 3083.157331] ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915] [ 3083.157372] ? intel_rotation_info_size+0x60/0x60 [i915] [ 3083.157413] ? intel_link_compute_m_n+0x80/0x80 [i915] [ 3083.157428] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157443] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157485] intel_prepare_plane_fb+0x2f8/0x5a0 [i915] [ 3083.157527] ? intel_crtc_get_vblank_counter+0x80/0x80 [i915] [ 3083.157536] drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper] [ 3083.157587] intel_atomic_commit+0x12e/0x4e0 [i915] [ 3083.157605] drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper] [ 3083.157621] drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157638] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157652] ? drm_lease_owner+0x1a/0x30 [drm] [ 3083.157668] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157681] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157696] drm_ioctl+0x45b/0x560 [drm] [ 3083.157711] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157725] ? drm_getstats+0x20/0x20 [drm] [ 3083.157729] ? timerqueue_del+0x49/0x80 [ 3083.157732] ? __remove_hrtimer+0x62/0xb0 [ 3083.157735] ? hrtimer_try_to_cancel+0x173/0x210 [ 3083.157738] do_vfs_ioctl+0x13b/0x880 [ 3083.157741] ? ioctl_preallocate+0x140/0x140 [ 3083.157744] ? _raw_spin_unlock_irq+0xe/0x30 [ 3083.157746] ? do_setitimer+0x234/0x370 [ 3083.157750] ? SyS_setitimer+0x19e/0x1b0 [ 3083.157752] ? SyS_alarm+0x140/0x140 [ 3083.157755] ? __rcu_read_unlock+0x66/0x80 [ 3083.157757] ? __fget+0xc4/0x100 [ 3083.157760] SyS_ioctl+0x74/0x80 [ 3083.157763] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157765] RIP: 0033:0x7f6135d0c6a7 [ 3083.157767] RSP: 002b:00007fff01451888 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 3083.157769] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f6135d0c6a7 [ 3083.157771] RDX: 00007fff01451950 RSI: 00000000c01864b0 RDI: 000000000000000c [ 3083.157772] RBP: 00007f613076f600 R08: 0000000000000001 R09: 0000000000000000 [ 3083.157773] R10: 0000000000000060 R11: 0000000000003246 R12: 0000000000000000 [ 3083.157774] R13: 0000000000000060 R14: 000000000000001b R15: 0000000000000060 [ 3083.157779] Allocated by task 831: [ 3083.157783] kmem_cache_alloc+0xc0/0x200 [ 3083.157822] i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915] [ 3083.157861] i915_gem_request_await_object+0x321/0x370 [i915] [ 3083.157900] i915_gem_do_execbuffer+0x1165/0x19c0 [i915] [ 3083.157937] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.157950] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157962] drm_ioctl+0x45b/0x560 [drm] [ 3083.157964] do_vfs_ioctl+0x13b/0x880 [ 3083.157966] SyS_ioctl+0x74/0x80 [ 3083.157968] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157971] Freed by task 831: [ 3083.157973] kmem_cache_free+0x77/0x220 [ 3083.158012] i915_gem_request_retire+0x72c/0xa70 [i915] [ 3083.158051] i915_gem_request_alloc+0x1e9/0x8b0 [i915] [ 3083.158089] i915_gem_do_execbuffer+0xa96/0x19c0 [i915] [ 3083.158127] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.158140] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.158153] drm_ioctl+0x45b/0x560 [drm] [ 3083.158155] do_vfs_ioctl+0x13b/0x880 [ 3083.158156] SyS_ioctl+0x74/0x80 [ 3083.158158] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.158162] The buggy address belongs to the object at ffff8806bf20f400 which belongs to the cache i915_dependency of size 64 [ 3083.158166] The buggy address is located 0 bytes inside of 64-byte region [ffff8806bf20f400, ffff8806bf20f440) [ 3083.158168] The buggy address belongs to the page: [ 3083.158171] page:00000000d43decc4 count:1 mapcount:0 mapping: (null) index:0x0 [ 3083.158174] flags: 0x17ffe0000000100(slab) [ 3083.158179] raw: 017ffe0000000100 0000000000000000 0000000000000000 0000000180200020 [ 3083.158182] raw: ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000 [ 3083.158184] page dumped because: kasan: bad access detected [ 3083.158187] Memory state around the buggy address: [ 3083.158190] ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158192] ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158195] >ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158196] ^ [ 3083.158199] ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158201] ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158203] ================================================================== Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Mike Keehan <mike@keehan.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436 Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk (cherry picked from commit c218ee03b9315073ce43992792554dafa0626eb8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-11drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.Kenneth Graunke
Geminilake requires the 3D driver to select whether barriers are intended for compute shaders, or tessellation control shaders, by whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when switching pipelines. Failure to do this properly can result in GPU hangs. Unfortunately, this means it needs to switch mid-batch, so only userspace can properly set it. To facilitate this, the kernel needs to whitelist the register. The workarounds page currently tags this as applying to Broxton only, but that doesn't make sense. The documentation for the register it references says the bit userspace is supposed to toggle only exists on Geminilake. Empirically, the Mesa patch to toggle this bit appears to fix intermittent GPU hangs in tessellation control shader barrier tests on Geminilake; we haven't seen those hangs on Broxton. v2: Mention WA #0862 in the comment (it doesn't have a name). Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org (cherry picked from commit ab062639edb0412daf6de540725276b9a5d217f9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs regression fix from Al Viro/ Fix a leak in socket() introduced by commit 8e1611e23579 ("make sock_alloc_file() do sock_release() on failures"). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix a leak in socket(2) when we fail to allocate a file descriptor.
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
2018-01-10Input: synaptics - Lenovo Thinkpad T460p devices should use RMI王振杰
The tpouchpad/trackpoint on Lenovo Thinkpad T460p work with smbus/RMI. Signed-off-by: Zhenjie Wang <zhenjie.wang@sjtu.edu.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10Input: of_touchscreen - add MODULE_LICENSEArnd Bergmann
The lack of the MODULE_LICENSE tag can lead to a warning here: WARNING: modpost: missing MODULE_LICENSE() in drivers/input/touchscreen/of_touchscreen.o I'm adding a license and description tag, but no MODULE_AUTHOR() as this file is a collection of standalone helper functions that were all added by different developers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10Fix a leak in socket(2) when we fail to allocate a file descriptor.Al Viro
Got broken by "make sock_alloc_file() do sock_release() on failures" - cleanup after sock_map_fd() failure got pulled all the way into sock_alloc_file(), but it used to serve the case when sock_map_fd() failed *before* getting to sock_alloc_file() as well, and that got lost. Trivial to fix, fortunately. Fixes: 8e1611e23579 (make sock_alloc_file() do sock_release() on failures) Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-11ALSA: pcm: Remove yet superfluous WARN_ON()Takashi Iwai
muldiv32() contains a snd_BUG_ON() (which is morphed as WARN_ON() with debug option) for checking the case of 0 / 0. This would be helpful if this happens only as a logical error; however, since the hw refine is performed with any data set provided by user, the inconsistent values that can trigger such a condition might be passed easily. Actually, syzbot caught this by passing some zero'ed old hw_params ioctl. So, having snd_BUG_ON() there is simply superfluous and rather harmful to give unnecessary confusions. Let's get rid of it. Reported-by: syzbot+7e6ee55011deeebce15d@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-10bpf, array: fix overflow in max_entries and undefined behavior in index_maskDaniel Borkmann
syzkaller tried to alloc a map with 0xfffffffd entries out of a userns, and thus unprivileged. With the recently added logic in b2157399cc98 ("bpf: prevent out-of-bounds speculation") we round this up to the next power of two value for max_entries for unprivileged such that we can apply proper masking into potentially zeroed out map slots. However, this will generate an index_mask of 0xffffffff, and therefore a + 1 will let this overflow into new max_entries of 0. This will pass allocation, etc, and later on map access we still enforce on the original attr->max_entries value which was 0xfffffffd, therefore triggering GPF all over the place. Thus bail out on overflow in such case. Moreover, on 32 bit archs roundup_pow_of_two() can also not be used, since fls_long(max_entries - 1) can result in 32 and 1UL << 32 in 32 bit space is undefined. Therefore, do this by hand in a 64 bit variable. This fixes all the issues triggered by syzkaller's reproducers. Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Reported-by: syzbot+b0efb8e572d01bce1ae0@syzkaller.appspotmail.com Reported-by: syzbot+6c15e9744f75f2364773@syzkaller.appspotmail.com Reported-by: syzbot+d2f5524fb46fd3b312ee@syzkaller.appspotmail.com Reported-by: syzbot+61d23c95395cc90dbc2b@syzkaller.appspotmail.com Reported-by: syzbot+0d363c942452cca68c01@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-10bpf: arsh is not supported in 32 bit alu thus reject itDaniel Borkmann
The following snippet was throwing an 'unknown opcode cc' warning in BPF interpreter: 0: (18) r0 = 0x0 2: (7b) *(u64 *)(r10 -16) = r0 3: (cc) (u32) r0 s>>= (u32) r0 4: (95) exit Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X} generation, not all of them do and interpreter does neither. We can leave existing ones and implement it later in bpf-next for the remaining ones, but reject this properly in verifier for the time being. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-10bpf: fix spelling mistake: "obusing" -> "abusing"Colin Ian King
Trivial fix to spelling mistake in error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-10IB/hfi1: Prevent a NULL dereferenceDan Carpenter
In the original code, we set "fd->uctxt" to NULL and then dereference it which will cause an Oops. Fixes: f2a3bc00a03c ("IB/hfi1: Protect context array set/clear with spinlock") Cc: <stable@vger.kernel.org> # 4.14.x Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-10iser-target: Fix possible use-after-free in connection establishment errorSagi Grimberg
In case we fail to establish the connection we must drain our pre-posted login recieve work request before continuing safely with connection teardown. Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Cc: <stable@vger.kernel.org> # 4.7+ Reported-by: Amrani, Ram <Ram.Amrani@cavium.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-10scsi: libsas: Disable asynchronous aborts for SATA devicesHannes Reinecke
Handling CD-ROM devices from libsas is decidedly odd, as libata relies on SCSI EH to be started to figure out that no medium is present. So we cannot do asynchronous aborts for SATA devices. Fixes: 909657615d9 ("scsi: libsas: allow async aborts") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10ipv6: sr: fix TLVs not being copied using setsockoptMathieu Xhonneux
Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header to a socket through setsockopt, but the current implementation doesn't copy possible TLVs at the end of the SRH received from userspace. Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr)) { ... } will never complete since the len and type fields of a possible HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error, and the HMAC will not be computed. This commit adds a memcpy in case TLVs have been appended to the SRH. Fixes: a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10ipv6: fix possible mem leaks in ipv6_make_skb()Eric Dumazet
ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c2ab0 ("ipv6: introduce ipv6_make_skb") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by: Mike Maloney <maloney@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge branch 'mlxsw-couple-of-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of small fixes for mlxsw driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum_qdisc: Don't use variable array in ↵Jiri Pirko
mlxsw_sp_tclass_congestion_enable Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: pci: Wait after reset before accessing HWYuval Mintz
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10nfp: always unmask aux interrupts at initJakub Kicinski
The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-108021q: fix a memory leak for VLAN 0 deviceCong Wang
A vlan device with vid 0 is allow to creat by not able to be fully cleaned up by unregister_vlan_dev() which checks for vlan_id!=0. Also, VLAN 0 is probably not a valid number and it is kinda "reserved" for HW accelerating devices, but it is probably too late to reject it from creation even if makes sense. Instead, just remove the check in unregister_vlan_dev(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge tag 'wireless-drivers-for-davem-2018-01-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 Hopefully the last set of fixes for 4.15. iwlwifi * fix DMA mapping regression since v4.14 wcn36xx * fix dynamic power save which has been broken since the driver was commited ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10of_mdio: avoid MDIO bus removal when a PHY is missingMadalin Bucur
If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10caif_usb: use strlcpy() instead of strncpy()Xiongfeng Wang
gcc-8 reports net/caif/caif_usb.c: In function 'cfusbl_device_notify': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] The compiler require that the input param 'len' of strncpy() should be greater than the length of the src string, so that '\0' is copied as well. We can just use strlcpy() to avoid this warning. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10doc: clarification about setting SO_ZEROCOPYKornilios Kourtis
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu
set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge branch 'sctp-Some-sockopt-optlen-fixes'David S. Miller
Marcelo Ricardo Leitner says: ==================== sctp: Some sockopt optlen fixes Hangbin Liu reported that some SCTP sockopt are allowing the user to get the kernel to allocate really large buffers by not having a ceiling on optlen. This patchset address this issue (in patch 2), replace an GFP_ATOMIC that isn't needed and avoid calculating the option size multiple times in some setsockopt. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: make use of pre-calculated lenMarcelo Ricardo Leitner
Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: add a ceiling to optlen in some sockoptsMarcelo Ricardo Leitner
Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: GFP_ATOMIC is not needed in sctp_setsockopt_eventsMarcelo Ricardo Leitner
So replace it with GFP_USER and also add __GFP_NOWARN. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge tag 'sound-4.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of the last-minute small PCM fixes: - A workaround for the recent regression wrt PulseAudio - Removal of spurious WARN_ON() that is triggered by syzkaller - Fixes for aloop, hardening racy accesses - Fixes in PCM OSS emulation wrt the unabortable loops that may cause RCU stall" * tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Allow aborting mutex lock at OSS read/write loops ALSA: pcm: Abort properly at pending signal in OSS read/write loops ALSA: aloop: Fix racy hw constraints adjustment ALSA: aloop: Fix inconsistent format due to incomplete rule ALSA: aloop: Release cable upon open error path ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error ALSA: pcm: Add missing error checks in OSS emulation plugin builder ALSA: pcm: Remove incorrect snd_BUG_ON() usages
2018-01-10x86/alternatives: Fix optimize_nops() checkingBorislav Petkov
The alternatives code checks only the first byte whether it is a NOP, but with NOPs in front of the payload and having actual instructions after it breaks the "optimized' test. Make sure to scan all bytes before deciding to optimize the NOPs in there. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/20180110112815.mgciyf5acwacphkq@pd.tnic
2018-01-10cgroup: make cgroup.threads delegatableRoman Gushchin
Make cgroup.threads file delegatable. The behavior of cgroup.threads should follow the behavior of cgroup.procs. Signed-off-by: Roman Gushchin <guro@fb.com> Discovered-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10MIPS: mm: Fix duplicate "const" on insn_table_MMJames Hogan
Fix the following gcc 7.x build error on microMIPS builds: arch/mips/mm/uasm-micromips.c:43:26: error: duplicate ‘const’ declaration specifier [-Werror=duplicate-decl-specifier] static const struct insn const insn_table_MM[insn_invalid] = { ^~~~~ The same issue has already been fixed in uasm-mips by commit 00e06297b351 ("MIPS: mm: remove duplicate "const" qualifier on insn_table"). Signed-off-by: James Hogan <jhogan@kernel.org> Fixes: ce807d5f67ed ("MIPS: Optimize uasm insn lookup.") Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: CM: Drop WARN_ON(vp != 0)James Hogan
Since commit 68923cdc2eb3 ("MIPS: CM: Add cluster & block args to mips_cm_lock_other()"), mips_smp_send_ipi_mask() has used mips_cm_lock_other_cpu() with each CPU number, rather than mips_cm_lock_other() with the first VPE in each core. Prior to r6, multicore multithreaded systems such as dual-core dual-thread interAptivs with CPU Idle enabled (e.g. MIPS Creator Ci40) results in mips_cm_lock_other() repeatedly hitting WARN_ON(vp != 0). There doesn't appear to be anything fundamentally wrong about passing a non-zero VP/VPE number, even if it is a core's region that is locked into the other region before r6, so remove that particular WARN_ON(). Fixes: 68923cdc2eb3 ("MIPS: CM: Add cluster & block args to mips_cm_lock_other()") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/17883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: ralink: Fix platform_get_irq's error checkingArvind Yadav
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17783/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: Fix CPS SMP NS16550 UART defaultsJames Hogan
The MIPS_CPS_NS16550_BASE and MIPS_CPS_NS16550_SHIFT options have no defaults for non-Malta platforms which select SYS_SUPPORTS_MIPS_CPS (i.e. the pistachio and generic platforms). This is problematic for automated allyesconfig and allmodconfig builds based on these platforms, since make silentoldconfig tries to ask the user for values, and especially since v4.15 where the default platform was switched to generic. Default these options to 0 and arrange for MIPS_CPS_NS16550 to be no when using that default base address, so that the option only has an effect when the default is provided (i.e. Malta) or when a value is provided by the user. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Paul Burton <paul.burton@mips.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: BCM47XX Avoid compile error with MIPS allnoconfigMatt Redfearn
Currently MIPS allnoconfig with CONFIG_BCM47XX=y fails to compile due to neither BCM47XX_BCMA nor BCM47XX_SSB being selected. This leads the enumeration in arch/mips/include/asm/mach-bcm47xx/bcm47xx.h to be empty, and compilation fails: In file included from arch/mips/bcm47xx/irq.c:32:0: ./arch/mips/include/asm/mach-bcm47xx/bcm47xx.h:34:1: error: expected identifier before '}' token }; ^ make[2]: *** [scripts/Makefile.build:314: arch/mips/bcm47xx/irq.o] Error 1 Fix this by ensuring that BCM47XX_SSB is selected if BCM47XX_BCMA is not. This allows us to select either system or both, but not neither. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILSMatt Redfearn
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link due to missing support for mac_pton(): LD vmlinux arch/mips/rb532/devices.o: In function `setup_kmac': devices.c:(.init.text+0xc): undefined reference to `mac_pton' Rather than adding dependencies to the platform to force inclusion of GENERIC_NET_UTILS which is selected by CONFIG_NET, just exclude the setup of the MAC address if CONFIG_NET is not selected in the kernel config. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLEMatt Redfearn
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link due to missing support for early_serial_setup(): LD vmlinux arch/mips/rb532/serial.o: In function `setup_serial_port': serial.c:(.init.text+0x14): undefined reference to `early_serial_setup' Rather than adding dependencies to the platform to force inclusion of SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM, etc, just exclude arch/mips/rb532/serial.c from the build when it's dependency is not selected in the kernel config. Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-10MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLEMatt Redfearn
Currently MIPS allnoconfig with CONFIG_ATH25=y fails to link due to missing support for early_serial_setup(): LD vmlinux arch/mips/ath25/devices.o: In function ath25_serial_setup': devices.c:(.init.text+0x68): undefined reference to 'early_serial_setup' Rather than adding dependencies to the platform to force inclusion of SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM, etc, just make ath25_serial_setup() a no-op when the dependency is not selected in the kernel config. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2018-01-11powerpc: Don't preempt_disable() in show_cpuinfo()Benjamin Herrenschmidt
This causes warnings from cpufreq mutex code. This is also rather unnecessary and ineffective. If we really want to prevent concurrent unplug, we could take the unplug read lock but I don't see this being critical. Fixes: cd77b5ce208c ("powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10drm/vmwgfx: Potential off by one in vmw_view_add()Dan Carpenter
The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error. It's one element beyond the end of the vmw_view_cotables[] table. My read on this is that it's possible to hit this failure. header->id comes from vmw_cmd_check() and it's a user controlled number between 1040 and 1225 so we can hit that error. But I don't have the hardware to test this code. Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org>
2018-01-11powerpc/xmon: Don't print hashed pointers in paca dumpMichael Ellerman
Remember when the biggest problem we had to worry about was hashed pointers, those were the days. These were missed in my earlier patch because they don't match "%p", but the macro is hiding a "%p", so these all end up being hashed, which is not what we want in xmon. Convert them to "%px". Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-12 14:15:59 +0000