summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-29Merge branch 'pci/pm'Bjorn Helgaas
- Print config space before suspend for debugging (Chen Yu) * pci/pm: PCI/PM: Print config space of devices before suspend
2020-01-29Merge branch 'pci/p2pdma'Bjorn Helgaas
- Add Intel SkyLake-E to the whitelist of host bridges that support peer-to-peer DMA (Armen Baloyan) * pci/p2pdma: PCI/P2PDMA: Add Intel SkyLake-E to the whitelist
2020-01-29Merge branch 'pci/misc'Bjorn Helgaas
- Fix Broadcom iProc quirk so it's applied regardless of whether the iproc driver is built-in or a module (Wei Liu) - Add extra delay when resuming AMD Ryzen5/7 XHCI controllers from D3hot so they work after resume from runtime suspend or suspend-to-idle (Daniel Drake) - Fix pci_alloc_irq_vectors() function name typo in docs (Zenghui Yu) * pci/misc: Documentation: PCI: Fix pci_alloc_irq_vectors() function name typo PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers PCI: Add generic quirk for increasing D3hot delay PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
2020-01-29Merge branch 'pci/aer'Bjorn Helgaas
- Log a message to identify the device that caused AER/DPC recovery to fail (Yicong Yang) - Initialize aer_fifo before use (Dongdong Liu) * pci/aer: PCI/AER: Initialize aer_fifo PCI/AER: Factor message prefixes with dev_fmt() PCI/AER: Log which device prevents error recovery
2020-01-29PCI: Allow adjust_bridge_window() to shrink resource if necessaryNicholas Johnson
Remove checks for resource size in adjust_bridge_window(). This is necessary to allow pci_bus_distribute_available_resources() to function when the kernel parameter "pci=hpmemsize=nn[KMG]" is used to allocate resources. Because the kernel parameter sets the size of all hotplug bridges to be the same, there are problems when nested hotplug bridges are encountered. Fitting a downstream hotplug bridge with size X and normal bridges with non-zero size Y into parent hotplug bridge with size X is impossible, and hence the downstream hotplug bridge needs to shrink to fit into its parent. Add check for if bridge is extended or shrunken and reflect that in the call to pci_dbg(). Reset the resource if its new size is zero (if we have run out of a bridge window resource) to prevent the PCI resource assignment code from attempting to assign a zero-sized resource. Link: https://lore.kernel.org/r/PSXP216MB0438D3E2CFE64EBAA32AF691803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Set resource size directly in adjust_bridge_window()Nicholas Johnson
Change adjust_bridge_window() to set resource size directly instead of using additional resource lists. Because additional resource lists are optional resources, any algorithm that requires guaranteed allocation that uses them cannot be guaranteed to work. Remove the resource from add_list, as a zero-sized additional resource is redundant. Update comment in pci_bus_distribute_available_resources() to reflect the above changes. Link: https://lore.kernel.org/r/PSXP216MB04386BA48874B56BC5CB0292803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename extend_bridge_window() to adjust_bridge_window()Nicholas Johnson
Rename extend_bridge_window() to adjust_bridge_window() to prepare for the fact that the window will be able to shrink. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB0438C47B3473D0C9DE531F18803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename extend_bridge_window() parameterNicholas Johnson
In extend_bridge_window(), change "available" parameter name to "new_size". This makes more sense as this parameter represents the new size for the window. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB043853617ECA4118C472A417803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Consider alignment of hot-added bridges when assigning resourcesNicholas Johnson
Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Remove local variable usage in pci_bus_distribute_available_resources()Nicholas Johnson
In pci_bus_distribute_available_resources(), use resource_size() rather than the local available_io, etc. No functional change intended; this just makes the preceding patch smaller. [bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Pass size + alignment to pci_bus_distribute_available_resources()Nicholas Johnson
Change pci_bus_distribute_available_resources() arguments from resource_size_t to struct resource to add more information required to get the alignment correct for bridge windows with alignment >1M. We require (size, alignment), instead of just (size) which is what is currently available. The change from resource_size_t to struct resource does just that. Note that the struct resource arguments are passed by value and not by reference. We do not want to pass by reference and change the resource size of the parent bridge window. We only want the size information. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM [bhelgaas: split parts to other patches to reduce the size of this one] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename variablesNicholas Johnson
In pci_bus_distribute_available_resources(), rename: io => io_per_hp mmio => mmio_per_hp mmio_pref => mmio_pref_per_hp No functional change; this is just to make a subsequent patch smaller. [bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29Merge tag 'y2038-drivers-for-v5.6-signed' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "Core, driver and file system changes These are updates to device drivers and file systems that for some reason or another were not included in the kernel in the previous y2038 series. I've gone through all users of time_t again to make sure the kernel is in a long-term maintainable state, replacing all remaining references to time_t with safe alternatives. Some related parts of the series were picked up into the nfsd, xfs, alsa and v4l2 trees. A final set of patches in linux-mm removes the now unused time_t/timeval/timespec types and helper functions after all five branches are merged for linux-5.6, ensuring that no new users get merged. As a result, linux-5.6, or my backport of the patches to 5.4 [1], should be the first release that can serve as a base for a 32-bit system designed to run beyond year 2038, with a few remaining caveats: - All user space must be compiled with a 64-bit time_t, which will be supported in the coming musl-1.2 and glibc-2.32 releases, along with installed kernel headers from linux-5.6 or higher. - Applications that use the system call interfaces directly need to be ported to use the time64 syscalls added in linux-5.1 in place of the existing system calls. This impacts most users of futex() and seccomp() as well as programming languages that have their own runtime environment not based on libc. - Applications that use a private copy of kernel uapi header files or their contents may need to update to the linux-5.6 version, in particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h, linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h. - A few remaining interfaces cannot be changed to pass a 64-bit time_t in a compatible way, so they must be configured to use CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit timestamps. Most importantly this impacts all users of 'struct input_event'. - All y2038 problems that are present on 64-bit machines also apply to 32-bit machines. In particular this affects file systems with on-disk timestamps using signed 32-bit seconds: ext4 with ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs" [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame * tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits) Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC" y2038: sh: remove timeval/timespec usage from headers y2038: sparc: remove use of struct timex y2038: rename itimerval to __kernel_old_itimerval y2038: remove obsolete jiffies conversion functions nfs: fscache: use timespec64 in inode auxdata nfs: fix timstamp debug prints nfs: use time64_t internally sunrpc: convert to time64_t for expiry drm/etnaviv: avoid deprecated timespec drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC drm/msm: avoid using 'timespec' hfs/hfsplus: use 64-bit inode timestamps hostfs: pass 64-bit timestamps to/from user space packet: clarify timestamp overflow tsacct: add 64-bit btime field acct: stop using get_seconds() um: ubd: use 64-bit time_t where possible xtensa: ISS: avoid struct timeval dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD ...
2020-01-29Merge tag 'printk-for-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk update from Petr Mladek: "Prevent replaying log on all consoles" * tag 'printk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: fix exclusive_console replaying
2020-01-29PCI: vmd: Add two VMD Device IDsSushma Kalakota
Add new VMD device IDs that require the bus restriction mode. Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-29io_uring: add support for epoll_ctl(2)Jens Axboe
This adds IORING_OP_EPOLL_CTL, which can perform the same work as the epoll_ctl(2) system call. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29eventpoll: support non-blocking do_epoll_ctl() callsJens Axboe
Also make it available outside of epoll, along with the helper that decides if we need to copy the passed in epoll_event. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29eventpoll: abstract out epoll_ctl() handlerJens Axboe
No functional changes in this patch. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29i2c: i801: Add support for Intel Comet Lake PCH-VJarkko Nikula
Add support for Intel Comet Lake PCH-V which is based on Intel Kaby Lake. Difference between it and other Comet Lake variants is that former uses previous iTCO version 4 and latter use version 6 like Intel Cannon Lake PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: writing-clients: properly name the stop conditionLuca Ceresoli
In I2C there is no such thing as a "stop bit". Use the proper naming: "stop condition". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reported-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: i2c-protocol: use same wording as smbus-protocolLuca Ceresoli
In smbus-protocol.rst we use the text "Implemented by" for the same meaning as "This corresponds to". Change everything to "Implemented by" for coherency. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reported-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: rename sections so the overall picture is clearerLuca Ceresoli
Some of the section names are not very clear. Reading those names in the index.rst page does not help much in grasping what the content is supposed to be. Rename those sections to clarify their content, especially when reading the index page. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: old-module-parameters: use monospace instead of ""Luca Ceresoli
Use a monospace (literal) formatting for better readability of sysfs attributes and the "dummy" client name. This looks much more readable in ReST-generated output. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: old-module-parameters: clarify this is for obsolete kernelsLuca Ceresoli
This section applies only to code for very old kernels. Avoid people reading this unnecessarily. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: old-module-parameters: fix internal hyperlinkLuca Ceresoli
Use ReST syntax so that a proper hyperlink is generated. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: instantiating-devices: use monospace for sysfs attributesLuca Ceresoli
Use a monospace (literal) formatting for better readability of sysfs attributes. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: instantiating-devices: rearrange static instatiationLuca Ceresoli
Among the "static" instantiation methods the "board file" method is described first. Move it as last, since it is being replaced by the other methods. Also fix subsubsection heading syntax and remove the "Method 1[abc]" prefix as the subsubsection structure clarifies the logical hierarchy. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: instantiating-devices: fix internal hyperlinkLuca Ceresoli
Use ReST syntax so that a proper hyperlink is generated. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: improve I2C Block transactions descriptionLuca Ceresoli
Clarify from the beginning what these transactions are, and specifically how they differ from the SMBus counterparts, i.e. the lack of a Count byte. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: fix punctuationLuca Ceresoli
Remove misplaced dot before colon. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: fix typoLuca Ceresoli
The subject is plural, fix the verb. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: fix kernel-doc function syntaxLuca Ceresoli
This clarifies these are functions (and would/will adds a hyperlink to the function documentation if/when documented). Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: enable kernel-doc function syntaxLuca Ceresoli
Hyperlinks from function names are not generated in headings. Move them in the plain text so they are rendered as clickable hyperlinks. While there also remove an unneeded colon in a heading. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: use proper names for ACK and NACKLuca Ceresoli
Use the proper ACK and NACK naming from the I2C specification instead of "accept" and "reverse accept". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: remove unneeded colons from tableLuca Ceresoli
These colons are not needed: the columns already nicely separate the symbols from their description. They are also inconsistently preceded by whitespace. Remove the colons completely to simplify and clean up. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: properly name start and stop conditionsLuca Ceresoli
In I2C there is no such thing as a "start bit" or a "stop bit". Use the proper naming: "start condition" and "stop condition". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: smbus-protocol: fix link syntaxLuca Ceresoli
Use the proper ReST syntax to generate a valid hyperlink. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: i2c-protocol: use proper names for ACK and NACKLuca Ceresoli
Use the proper ACK and NACK naming from the I2C specification instead of "accept" and "reverse accept". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: i2c-protocol: remove unneeded colons from tableLuca Ceresoli
These colons are not needed: the columns already nicely separate the symbols from their description. They are also inconsistently preceded by whitespace. Remove the colons completely to simplify and clean up. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: i2c-protocol: properly name start and stop conditionsLuca Ceresoli
In I2C there is no such thing as a "start bit" or a "stop bit". Use the proper naming: "start condition" and "stop condition". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: i2c-protocol: fix kernel-doc function syntaxLuca Ceresoli
This clarifies these are functions and adds a hyperlink to the function documentation. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistentlyLuca Ceresoli
"I2C transfer" is a legitimate english sentence, no need for a hyphen between the two words, as as such it is used in most of the documentation. Remove the hyphen in the few places where it is present. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: fix typoLuca Ceresoli
Fix "issus" -> "issues". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: call it "I2C" consistentlyLuca Ceresoli
Uppercase "I2C" is used almost everywhere in the docs, but the lowercase version "i2c" is used somewhere. Use the uppercase form consistently. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: summary: rewrite the "terminology" sectionLuca Ceresoli
This section, partly dating back to the pre-git era, is somewhat unclear and partly incorrect. Rewrite it almost completely including a reference figure, concise but precise definition of each term and the paths where drivers are found. Particular care has been put in clarifying the relation between adapter and algorithm, which has no correspondence in the I2C spec terminology. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: summary: extend introductionLuca Ceresoli
- state the "official" name (I²C, not I2C, according to the spec) at the beginning but keep using the more practical I2C elsewhere - mention some known different names - add link to the specification document Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29docs: i2c: sort index logicallyLuca Ceresoli
The index page currently lists sections in alphabetical file order without caring about their content. Sort sections based on their content logically, according to the following structure: * Intro to I2C/SMBus and their usage in Linux: summary, i2c-protocol, smbus-protocol, instantiating-devices, busses/index, i2c-topology, muxes/i2c-mux-gpio * Implementing drivers: writing-clients, dev-interface, dma-considerations, fault-codes, functionality * Debugging: gpio-fault-injection, i2c-stub * Slave I2C: slave-interface, slave-eeprom-backend * Advanced: ten-bit-addresses * Obsolete info: upgrading-clients, old-module-parameters Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-5.6 The main feature is the idle-state rework of the pca954x driver from Biwen Li.
2020-01-29Merge tag 'at24-updates-for-v5.6' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.6 at24 updates for linux v5.6 - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control
2020-01-29i2c: xiic: fix indentation issueColin Ian King
There is a statement that is indented one level too deeply, remove the extraneous tab. Fixes: b4c119dbc300 ("i2c: xiic: Add timeout to the rx fifo wait loop") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit (git 2.34.1) at 2025-09-15 15:21:37 +0000