summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-15brcmfmac: remove unused parameter of brcmf_sdcard_reg_readFranky Lin
The size parameter for brcmf_sdcard_reg_read is always 4. Remove it to make the code neat. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15ath9k_hw: Fix RTT calibrationSujith Manoharan
This patch fixes multiple issues with the current RTT implementation in ath9k. * The data that is obtained from the RTT interface registers are stored in 31:5 - mask out the extra bits when reading them. * A history buffer is maintained which is not needed at all. Remove this array and just store the baseband data for each chain (or bank). * A 'num_readings' variable was being used to handle the last entry. But it was being used in an improper manner, with the result that the RTT values were never being written to the RTT Interface registers. Fix this by using a simple flag. * Stop baseband operations before programming the calibration values to the HW. * Do not restore RX gain settings as part of RTT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mac80211: fix the increment of unicast/multicast counters for forwarded PREQChun-Yeow Yeoh
Forwarded PREQ is either unicast or multicast. The appropriate counters should be incremented accordingly. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mac80211: send peer candidate event for new sta onlyThomas Pedersen
Only send a cfg80211 new peer candidate notification if userspace has yet to allocate this station entry. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: don't disable AGG queues that are not enabledEmmanuel Grumbach
If the BA session is torn down before we had a chance to start it we shouldn't disable the AGG tx queues that weren't enabled. This can happen in two cases: 1) We get a delBA before we drained our Tx queues in agg start flow 2) We didn't get the (successfull) addBA response on time Reported-by: Daniel Chyan <dchyan@princeton.edu> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: don't flood logs when HT debug flag is setEmmanuel Grumbach
We have TX_REPLY for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: fix power index handlingAmit Beka
The power index that the user gives as module parameter in in range 1-5, but we need to decrease it in order to create an array index out of it (0-4) for the power table command. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: make sure reduced tx power bit is validWey-Yi Guy
Once driver decide to change reduced tx power behavior, make sure the reduce tx power valid bit is set Change-Id: I3afae96319292d8cb347a812a948085c5db7ad91 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1948 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: add documentation for bt reduced tx powerWey-Yi Guy
Change-Id: Ia6294d651dcffdcaf8b62e67bcef52bd8c158dea Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1947 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: include rssi as part of decision making for reduce txpowerWey-Yi Guy
In bt coex, consider the average rssi as part of decision making process Change-Id: I8d11d7f177a6875e2a9d08f7539d42253226fd7a Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1945 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Select CRC_CCITT for SHDLC link layer of HCI based driversMarcel Holtmann
The SHDLC link layer of HCI based drivers uses CRC-CCITT and thus needs to select that kernel option. Otherwise it ends up with this linking error: net/built-in.o: In function `nfc_shdlc_add_len_crc': net/nfc/hci/shdlc.c:113: undefined reference to `crc_ccitt' Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mwifiex: fix coding style issue in mwifiex_deauthenticateBing Zhao
Documentation/CodingStyle says "Do not unnecessarily use braces where a single statement will do." Use "switch/case", instead of "if/else_if/else", so that more cases can be added later. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mac80211_hwsim: Fix rate control by correctly reporting transmission countsJavier Cardona
Drivers need to report the number of transmission attempts for each rate as well as to terminate the rate array with -1. The in-kernel datapath of hwsim simulates a perfect medium, therefore the driver only needs to report that the first transmission attempt was sucessfully completed at the most favorable rate. Rate control is working again for this driver. Tested mesh mode with minstrel. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15userns: Convert stat to return values mapped from kuids and kgidsEric W. Biederman
- Store uids and gids with kuid_t and kgid_t in struct kstat - Convert uid and gids to userspace usable values with from_kuid and from_kgid Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-05-15sparc: introduce arch/sparc/KbuildSam Ravnborg
This allows us to do: make arch/sparc/ to build the core part of the sparc kernel. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc: remove obsolete documentationSam Ravnborg
When we killed btfixup this readme no longer has any value. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc: clean up MakefileSam Ravnborg
- delete unused variables - align assignments - drop stale comments - kill use of "\" for line continuation Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc32: delete muldiv.o from MakefileSam Ravnborg
The source file is no more.. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15target: add support for the WRITE_VERIFY commandBernhard Kohl
Some legacy OS use WRITE_VERIFY on hard disks. Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-15ARM: clps711x: Cleanup IRQ handlingAlexander Shiyan
This patch contains two changes: - Removed unused definitions from mach/irqs.h - Do not mask interrupts in ack procedure, because we have separate intX_mask procedure for do it and actually these 2 functions are called sequentially Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-15[media] V4L2: mt9t112: fixup JPEG initialization workaroundMasahiro Nakai
It has been indicated on Atmark Techno Web page http://armadillo.atmark-techno.com/faq/a800eva-dont-work-camera Signed-off-by: Masahiro Nakai <nakai@atmark-techno.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L2: sh_mobile_ceu: manage lower 8bit busKuninori Morimoto
CAMCR::DTIF feild controls camera bus as upper8bit/16bit/lower8bit. This patch manages unmanaged lower 8bit bus Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L: sh_mobile_ceu_camera: don't fail TRY_FMTGuennadi Liakhovetski
VIDIOC_TRY_FMT shouldn't fail if the user requests an unsupported pixel format. Instead the driver should replace it with a supported one. Fix the sh_mobile_ceu_camera driver accordingly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L: soc-camera: switch to using the existing .enum_framesizes()Guennadi Liakhovetski
The recently introduced .enum_mbus_fsizes() v4l2-subdev video operation is a duplicate of the .enum_framesizes() operation, introduced earlier. Switch soc-camera over to using the original one. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L: mx2-camera: avoid overflowing 32-bitsGuennadi Liakhovetski
In mx2_camera_try_fmt(), when applying i.MX25 restrictions to frame sizes, the height is checked to be <= 0xffff. But later an integer multiplication height * 4 * 0x3ffff is performed, which will overflow even for bounded height values. This patch switches to using 64-bit multiplication and division to avoid overflowing. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] sh_mobile_ceu_camera: Support user-configurable line strideLaurent Pinchart
In image mode, the CEU allows configurable line strides up to 8188 pixels. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: unify sh_mobile_ceu_set_rect() in data-fetch mode] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Support user-configurable line strideLaurent Pinchart
Add a capabilities field to the soc_camera_host structure to flag hosts that support user-configurable line strides. soc_camera_try_fmt() then passes the user-provided bytesperline and sizeimage format fields to such hosts, and expects the host to check (and fix if needed) the values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: fix a typo in mx2_camera.c] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] mx2_camera: Use soc_mbus_image_size() instead of manual computationLaurent Pinchart
Use the new soc_mbus_image_size() function to compute the image size. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Honor user-requested bytesperline and sizeimageLaurent Pinchart
Compute the bytesperline and sizeimage values when trying/setting formats or when allocating buffers by taking the user-requested values into account. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Add soc_mbus_image_sizeLaurent Pinchart
The function returns the minimum size of an image for a given number of bytes per line (as per the V4L2 specification), width and format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Fix bytes per line computation for planar formatsLaurent Pinchart
The V4L2 specification defines bytesperline for planar formats as the number of bytes per line for the largest plane. Modify soc_mbus_bytes_per_line() accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Add plane layout information to struct soc_mbus_pixelfmtLaurent Pinchart
To compute the value of the v4l2_pix_format::bytesperline field, we need information about planes layout for planar formats. The new enum soc_mbus_layout conveys that information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc_camera: Use soc_camera_device::bytesperline to compute line sizesLaurent Pinchart
Instead of computing the line sizes, use the previously negotiated soc_camera_device::bytesperline value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc_camera: Use soc_camera_device::sizeimage to compute buffer sizesLaurent Pinchart
Instead of computing the buffer size manually in the videobuf queue setup and buffer prepare callbacks, use the previously negotiated soc_camera_device::sizeimage value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] mx2_camera: Fix sizeimage computation in try_fmt()Laurent Pinchart
The try_fmt() handler restricts the image width based on the hardware limits and updates the bytesperline value, but doesn't update sizeimage. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15Merge tag 'asoc-3.4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute fixes Some last minute fixes for ASoC. Small, focused changes to specific drivers.
2012-05-15xfrm: Convert several xfrm policy match functions to bool.David S. Miller
xfrm_selector_match xfrm_sec_ctx_match __xfrm4_selector_match __xfrm6_selector_match Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15staging: comedi: refactor unioxx5 driver to remove forward declarationsH Hartley Sweeten
Refactor of the unioxx5 comedi driver to remove all the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15sparc32: Kill off software 32-bit multiply/divide routines.David S. Miller
For the explicit calls to .udiv/.umul in assembler, I made a mechanical (read as: safe) transformation. I didn't attempt to make any simplifications. In particular, __ndelay and __udelay can be simplified significantly. Some of the %y reads are unnecessary and these routines have no need any longer for allocating a register window, they can be leaf functions. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15mfd: wm8994: Update to fully use irq_domainMark Brown
Take advantage of the new regmap irq_domain support to dynamically allocate interrupts, using regmap_irq_get_virq() rather than irq_base to look up the interrupts. This means that most users should not need to specify an irq_base at all. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-15sparc32: Build kernel with -mcpu=v8David S. Miller
With Cypress gone we can generate real hardware integer multiply and divide instructions at will. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15net: Add net_ratelimited_function and net_<level>_ratelimited macrosJoe Perches
__ratelimit() can be considered an inverted bool test because it returns true when not ratelimited. Several tests in the kernel tree use this __ratelimit() function incorrectly. No net_ratelimit uses are incorrect currently though. Most uses of net_ratelimit are to log something via printk or pr_<level>. In order to minimize the uses of net_ratelimit, and to start standardizing the code style used for __ratelimit() and net_ratelimit(), add a net_ratelimited_function() macro and net_<level>_ratelimited() logging macros similar to pr_<level>_ratelimited that use the global net_ratelimit instead of a static per call site "struct ratelimit_state". Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15dummy: documentation is staleAlan Cox
dummy0/1/2 names are always used and there are options to set multiple dummy devices. Remove the obsolete text Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42865 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc32: cleanup mm/fault_32.cSam Ravnborg
- remove unused variables - fix coding style issues that hurts my eyes Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15pch_gbe: fix transmit racesEric Dumazet
Andy reported pch_gbe triggered "NETDEV WATCHDOG" errors. May 11 11:06:09 kontron kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x1ec/0x200() (Not tainted) May 11 11:06:09 kontron kernel: Hardware name: N/A May 11 11:06:09 kontron kernel: NETDEV WATCHDOG: eth0 (pch_gbe): transmit queue 0 timed out It seems pch_gbe has a racy tx path (races with TX completion path) Remove tx_queue_lock lock since it has no purpose, we must use tx_lock instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andy Cress <andy.cress@us.kontron.com> Tested-by: Andy Cress <andy.cress@us.kontron.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15cdc_ether: add Novatel USB551L device IDs for FLAG_WWANDan Williams
Needs to be tagged with FLAG_WWAN, which since it has generic descriptors, won't happen if we don't override the generic driver info. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable@vger.kernel.org Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15usbnet: fix skb traversing races during unlink(v2)Ming Lei
Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15regulator: max8660: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-21 21:35:21 +0000