summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-03IB/hns: Change the logic for allocating uar registersLijun Ou
This patch mainly modifies the logic for allocating uar registers. In HiP06 SoC, HW has 8 group of uar registers for kernel and user space application. The uar index is assigned as follows: 0 ------ for kernel 1~7 ------ for user space application Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/hns: Add phy_port for computing GSI/QPNLijun Ou
This patch mainly adds phy_port to HNS RoCE QP. This shall be used in calculating the GSI QPN for the port. Initally when RDMA is being established, all IB ports share a QPN which later needs to be re-assigned to a particular GSI/QPN and which is per-port. This also fixes a bug in base driver where iboe port was being used instead of phy_port at some places. This values might not be same always. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/hns: Fix two possible bugs for rdma cmLijun Ou
Fix the length of wqe that maybe lead to an error and write the end bytes of QP1C into the register. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/hns: Fix the value of device_cap_flagsLijun Ou
In the latest IB core version, it has some known issues with memory registration using the local_dma_lkey. Thus RoCE don't expose support for it, and remove device->local_dma_lkey which is introduced to working systems. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/hns: Add & initialize "node_guid" parameter for RDMA CMLijun Ou
According to the Infiniband spec, NodeGUID uniquely identifies a node. This must be initialized to some unique value. This patch adds the support to the HNS RoCE driver to fetch the NodeGUID value from DT or ACPI and then use this value to initialize the node_guid parameter of IB device. This value shall be used by RDMA CM. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/hns: Register HNS RoCE Driver get_netdev() with IB CoreLijun Ou
This patch adds get_netdev() function to the IB device. This shall be used to fetch netdev corresponding to the port number. This function would be called by IB core(Generic CM Agent) for example, when the RDMA connection is being established. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu <xavier.huwei@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: delete redundant broadcast packet filter processDaode Huang
The broadcast packets is filtered in the hardware now, so this process is no need in the driver, just delete it. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: bug fix about broadcast/multicast packetsDaode Huang
When the dsaf mode receives a broadcast packet, it will filter the packet by comparing the received queue number and destination queue number(get from forwarding table), if they are the same, the packet will be filtered. Otherwise, the packet will be loopback. So this patch select queue 0 to send broadcast and multicast packets. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: fix the bug of forwarding tableDaode Huang
As the sub queue id in the broadcast forwarding table is always set to absolute queue 0 rather than the interface's relative queue 0, this will cause the received broadcast packets loopback to rcb. This patch sets the sub queue id to relative queue 0 of each port. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: fix port not available after testing loopbackKejian Yan
After running command "ethtool -t eth0", eth0 can not be connected to network. It is caused by the changing the inner loopback register and this register cannot be changed when hns connected to network. The routine of setting this register needs to be removed and using promisc mode to let the packet looped back pass by dsaf mode. Reported-by: Jun He <hjat2005@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhaung <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: delete repeat read fbd num after whileDaode Huang
Because we handle the received packets after napi, so delete the checking before submitting. It delete the code of read the fbd number register, which reduces the cpu usages while receiving packets Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: add fini_process for v2 napi processDaode Huang
This patch adds fini_process for v2, it handles the packets recevied by the hardware in the napi porcess. With this patch, the hardware irq numbers will drop 50% per sec. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: bug fix about setting coalsecs-usecs to 0Daode Huang
When set rx/tx coalesce usecs to 0, the interrupt coalesce will be disabled, but there is a interrupt rate limit which set to 1us, it will cause no interrupt occurs. This patch disable interrupt limit when sets coalsecs usecs to 0, and restores it to 1 in other case. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03net: hns: fix port unavailable after hnae_reserve_buffer_map faillipeng
When hnae_reserve_buffer_map fail, it will break cycle and some buffer description has no available memory, therefore the port will be unavailable. Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/rdmavt: Trivial function comment corrected.Parav Pandit
Corrected function name in comment from qib_ to rvt_. Signed-off-by: Parav Pandit <pandit.parav@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03Merge branch 'pci/virtualization' into nextBjorn Helgaas
* pci/virtualization: PCI: xilinx: Relax device number checking to allow SR-IOV PCI: designware: Relax device number checking to allow SR-IOV PCI: altera: Relax device number checking to allow SR-IOV PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn() PCI: Mark Atheros AR9580 to avoid bus reset
2016-10-03Merge branch 'pci/resource' into nextBjorn Helgaas
* pci/resource: PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
2016-10-03Merge branch 'pci/pm' into nextBjorn Helgaas
* pci/pm: PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM
2016-10-03Merge branch 'pci/msi' into nextBjorn Helgaas
* pci/msi: PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for ARC
2016-10-03Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Drop CONFIG_KEXEC_CORE ifdeffery
2016-10-03Merge branch 'pci/hotplug' into nextBjorn Helgaas
* pci/hotplug: x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators PCI: pciehp: Remove useless pciehp_get_latch_status() calls PCI: pciehp: Clean up dmesg "Slot(%s)" messages PCI: pciehp: Remove unnecessary guard PCI: pciehp: Don't re-read Slot Status when handling surprise event PCI: pciehp: Don't re-read Slot Status when queuing hotplug event PCI: pciehp: Process all hotplug events before looking for new ones PCI: pciehp: Return IRQ_NONE when we can't read interrupt status PCI: pciehp: Rename pcie_isr() locals for clarity PCI: pciehp: Clear attention LED on device add
2016-10-03Merge branch 'pci/enumeration' into nextBjorn Helgaas
* pci/enumeration: PCI: tegra: Fix pci_remap_iospace() failure path PCI: generic: Fix pci_remap_iospace() failure path PCI: rcar: Fix pci_remap_iospace() failure path PCI: versatile: Fix pci_remap_iospace() failure path PCI: designware: Fix pci_remap_iospace() failure path PCI: aardvark: Fix pci_remap_iospace() failure path
2016-10-03Merge branch 'pci/aer' into nextBjorn Helgaas
* pci/aer: PCI/AER: Fix aer_probe() kernel-doc comment PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation PCI/AER: Remove aerdriver.forceload kernel parameter PCI/AER: Remove aerdriver.nosourceid kernel parameter x86/PCI: VMD: Add quirk for AER to ignore source ID PCI/AER: Add bus flag to skip source ID matching Conflicts: drivers/pci/probe.c
2016-10-03perf tools: Add jsmn `jasmine' JSON parserAndi Kleen
I need a JSON parser. This adds the simplest JSON parser I could find -- Serge Zaitsev's jsmn `jasmine' -- to the perf library. I merely converted it to (mostly) Linux style and added support for non 0 terminated input. The parser is quite straight forward and does not copy any data, just returns tokens with offsets into the input buffer. So it's relatively efficient and simple to use. The code is not fully checkpatch clean, but I didn't want to completely fork the upstream code. Original source: http://zserge.bitbucket.org/jsmn.html In addition I added a simple wrapper that mmaps a json file and provides some straight forward access functions. Used in follow-on patches to parse event files. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1473978296-20712-2-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> [ Use fcntl.h instead of sys/fcntl.h to fix the build on Alpine Linux 3.4/musl libc, use stdbool.h to avoid clashing with 'bool' typedef there ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03tools build: Make fixdep a hostprogJiri Olsa
It is used in the build process, so stop suppressing its build in tools cross builds. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160927141846.GA6589@krava [ Use HOSTCC on the $(OUTPUT)fixdep target, it was using the x-compiler to link fixdep-in.o, that was correctly built with HOSTCC and thus failing ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03tools build: Add support for host programs formatJiri Olsa
In some cases, like for fixdep and shortly for jevents, we need to build a tool to run on the host that will be used in building a tool, such as perf, that is being cross compiled, so do like the kernel and provide HOSTCC, HOSTLD and HOSTAR to do that. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Andi Kleen <andi@firstfloor.org> Requested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160927141846.GA6589@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03perf tools: Experiment with cppcheckArnaldo Carvalho de Melo
Experimenting a bit using cppcheck[1], a static checker brought to my attention by Colin, reducing the scope of some variables, reducing the line of source code lines in the process: $ cppcheck --enable=style tools/perf/util/thread.c Checking tools/perf/util/thread.c... [tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced. [tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced. [tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced. Will continue later, but these are already useful, keep them. 1: https://sourceforge.net/p/cppcheck/wiki/Home/ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ixws7lbycihhpmq9cc949ti6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03perf probe: Check if *ptr2 is zero and not ptr2Colin Ian King
Static anaylsis with cppcheck[1] detected an incorrect comparison: [tools/perf/util/probe-event.c:216]: (warning) Char literal compared with pointer 'ptr2'. Did you intend to dereference it? Dereference ptr2 for the comparison to fix this. 1: https://sourceforge.net/p/cppcheck/wiki/Home/ Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 35726d3a4ca9 ("perf probe: Fix to cut off incompatible chars from group name") Link: http://lkml.kernel.org/r/20161003103431.18534-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03libceph: ceph_build_auth() doesn't need ceph_auth_build_hello()Ilya Dryomov
A static bug finder (EBA) on Linux 4.7: Double lock in net/ceph/auth.c second lock at 108: mutex_lock(& ac->mutex); [ceph_auth_build_hello] after calling from 263: ret = ceph_auth_build_hello(ac, msg_buf, msg_len); if ! ac->protocol -> true at 262 first lock at 261: mutex_lock(& ac->mutex); [ceph_build_auth] ceph_auth_build_hello() is never called, because the protocol is always initialized, whether we are checking existing tickets (in delayed_work()) or getting new ones after invalidation (in invalidate_authorizer()). Reported-by: Iago Abal <iari@itu.dk> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03libceph: use CEPH_AUTH_UNKNOWN in ceph_auth_build_hello()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03ceph: fix description for rsize and rasize mount optionsAndreas Gerstmayr
Signed-off-by: Andreas Gerstmayr <andreas.gerstmayr@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03rbd: use kmalloc_array() in rbd_header_from_disk()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03ceph: use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03ceph: handle CEPH_SESSION_REJECT messageYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-03ceph: avoid accessing / when mounting a subpathYan, Zheng
Accessing / causes failuire if the client has caps that restrict path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-03ceph: fix mandatory flock checkYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-03ceph: remove warning when ceph_releasepage() is called on dirty pageNeilBrown
If O_DIRECT writes are racing with buffered writes, then the call to invalidate_inode_pages2_range() can call ceph_releasepage() on dirty pages. Most filesystems hold inode_lock() across O_DIRECT writes so they do not suffer this race, but cephfs deliberately drops the lock, and opens a window for the race. This race can be triggered with the generic/036 test from the xfstests test suite. It doesn't happen every time, but it does happen often. As the possibilty is expected, remove the warning, and instead include the PageDirty() status in the debug message. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-10-03ceph: ignore error from invalidate_inode_pages2_range() in direct writeNeilBrown
This call can fail if there are dirty pages. The preceding call to filemap_write_and_wait_range() will normally remove dirty pages, but as inode_lock() is not held over calls to ceph_direct_read_write(), it could race with non-direct writes and pages could be dirtied immediately after filemap_write_and_wait_range() returns If there are dirty pages, they will be removed by the subsequent call to truncate_inode_pages_range(), so having them here is not a problem. If the 'ret' value is left holding an error, then in the async IO case (aio_req is not NULL) the loop that would normally call ceph_osdc_start_request() will see the error in 'ret' and abort all requests. This doesn't seem like correct behaviour. So use separate 'ret2' instead of overloading 'ret'. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-10-03ceph: fix error handling of start_read()Yan, Zheng
If start_page() fails to add a page to page cache or fails to send OSD request. It should cal put_page() (instead of free_page()) for relevant pages. Besides, start_page() need to cancel fscache readpage if it fails to send OSD request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reported-by: Zhi Zhang <zhang.david2011@gmail.com>
2016-10-03rbd: add rbd_obj_request_error() helperIlya Dryomov
Pull setting an error and marking a request done code into a new helper. obj_request_img_data_test() check isn't strictly needed right now, but makes it applicable to !img_data requests and a bit safer. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-03rbd: img_data requests don't own their page arrayIlya Dryomov
Move the check into rbd_obj_request_destroy() to avoid use-after-free on errors in rbd_img_request_fill(..., OBJ_REQUEST_PAGES, ...), where pages, owned by the caller, gets freed in rbd_img_request_fill(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: don't call rbd_osd_req_format_read() for !img_data requestsIlya Dryomov
Accessing obj_request->img_request union field is only valid for object requests associated with an image (i.e. if obj_request_img_data_test() returns true). rbd_osd_req_format_read() used to do more, but now it just sets osd_req->snap_id. Standalone and stat object requests always go to the HEAD revision and are fine with CEPH_NOSNAP set by libceph, so get around the invalid union field use by simply not calling rbd_osd_req_format_read() in those places. Reported-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: rework rbd_img_obj_exists_submit() error pathsIlya Dryomov
- don't put obj_request before rbd_obj_request_get() if rbd_obj_request_create() fails - don't leak pages if rbd_obj_request_create() fails - don't leak stat_request if rbd_osd_req_create() fails Reported-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: don't crash or leak on errors in rbd_img_obj_parent_read_full_callback()Ilya Dryomov
- fix parent_length == img_request->xferred assert to not fire on copyup read failures - don't leak pages if copyup read fails or we can't allocate a new osd request Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: move bumping img_request refcount into rbd_obj_request_submit()Ilya Dryomov
Commit 0f2d5be792b0 ("rbd: use reference counts for image requests") added rbd_img_request_get(), which rbd_img_request_fill() calls for each obj_request added to img_request. It was an urgent band-aid for the uglyness that is rbd_img_obj_callback() and none of the error paths were updated. Given that this img_request reference is meant to represent an obj_request that hasn't passed through rbd_img_obj_callback() yet, proper cleanup in appropriate destructors is a challenge. However, noting that if we don't get a chance to call rbd_obj_request_complete(), there is not going to be a call to rbd_img_obj_callback(), we can move rbd_img_request_get() into rbd_obj_request_submit() and fixup the two places that call rbd_obj_request_complete() directly and not through rbd_obj_request_submit() to temporarily bump img_request, so that rbd_img_obj_callback() can put as usual. This takes care of img_request leaks on errors on the submit side. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-10-03rbd: mark the original request as done if stat request failsIlya Dryomov
If stat request fails with something other than -ENOENT (which just means that we need to copyup), the original object request is never marked as done and therefore never completed. Fix this by moving the mark done + complete snippet from rbd_img_obj_parent_read_full() into rbd_img_obj_exists_callback(). The former remains covered, as the latter is its only caller (through rbd_img_obj_request_submit()). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: clean up asserts in rbd_img_obj_request_submit() helpersIlya Dryomov
Assert once in rbd_img_obj_request_submit(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: change rbd_obj_request_submit() signatureIlya Dryomov
- osdc parameter is useless - starting with commit 5aea3dcd5021 ("libceph: a major OSD client update"), ceph_osdc_start_request() always returns success Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: David Disseldorp <ddiss@suse.de>
2016-10-03rbd: lock_on_read map optionIlya Dryomov
Add a per-device option to acquire exclusive lock on reads (in addition to writes and discards). The use case is iSCSI, where it will be used to prevent execution of stale writes after the implicit failover. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Mike Christie <mchristi@redhat.com>
2016-10-03gpio: OF: separation of concernsLinus Walleij
The generic GPIO library directly implement code for of_find_gpio() which is only used with CONFIG_OF and causes compilation problems on archs that do not even have stubs for OF functions, especially on UM that does not implement any IO remap functions. Move the function to gpiolib-of.c, implement a static inline stub in gpiolib.h returning PTR_ERR(-ENOENT) if CONFIG_OF_GPIO is not set and be done with it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-16 00:30:54 +0000