| Age | Commit message (Collapse) | Author |
|---|
|
Currently, link station statistics for MLO are filled by mac80211.
But there are some statistics that kept by mac80211 might not be
accurate, so let the driver pre-fill the link statistics. The driver
can fill the values (indicating which field is filled, by setting the
filled bitmapin in link_station structure).
Statistics that driver don't fill are filled by mac80211.
Hence, add link_sta_statistics callback to fill link station statistics
for MLO in sta_set_link_sinfo() by drivers.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, RX stats packets are incremented for deflink member for
non-ML and multi-link(ML) station case. However, for ML station,
packets should be incremented based on the specific link.
Therefore, if a valid link_id is present, fetch the corresponding
link station information and increment the RX packets for that link.
For non-MLO stations, the deflink will still be used.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-10-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, sinfo structure is supported to fill information at
deflink( or one of the links) level for station. This has problems
when applied to fetch multi-link(ML) station information.
Hence, if valid_links are present, support filling link_station
structure for each link.
This will be helpful to check the link related statistics during MLO.
Additionally, TXQ stats for pertid are applicable at station level
not at link level. Therefore check link_id is less then 0, before
filling TXQ stats in pertid stats.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com
[fix some indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, sinfo->filled is for set in sta_set_sinfo() after filling
the corresponding fields in station_info structure for station statistics.
For non-ML stations, the fields are correctly filled from sta->deflink
and corresponding sinfo->filled bit are set, but for MLO any one of
link's data is filled and corresponding sinfo->filled bit is set.
For MLO before embed NL message, fields of sinfo structure like
bytes, packets, signal are updated with accumulated, best, least of all
links data. But some of fields like rssi, pertid don't make much sense
at MLO level.
Hence, to prevent misinterpretation, clear sinfo->filled for fields
which don't make much sense at MLO level. This will prevent filling
misleading values in NL message.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-8-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, if a link gets removed in between for a station then
directly accumulated data will fall down to sum of other active links.
This will bring inconsistency in station dump statistics.
For instance, let's take Tx packets
- at t=0-> link-0:2 link-1:3 Tx packets => accumulated = 5
- at t=1-> link-0:4 link-1:6 Tx packets => accumulated = 10
let say at t=2, link-0 went down => link-0:0 link-1:7 => accumulated = 7
Here, suddenly accumulated Tx packets will come down to 7 from 10.
This is showing inconsistency.
Therefore, store link-0 data when it went down and add to accumulated
Tx packet = 11.
Hence, store the removed link statistics data in sta structure and
add it in accumulated statistics for consistency.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-7-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, station_info structure is passed to fill station statistics
from mac80211/drivers. After NL message send to user space for requested
station statistics, memory for station statistics is freed in cfg80211.
Therefore, memory allocation/free for link station statistics should
also happen in cfg80211 only.
Hence, allocate the memory for link_station structure for all
possible links and free in cfg80211_sinfo_release_content().
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently statistics are handled at link level for multi-link
operation(MLO). There is no provision to check accumulated statistics
for a multi-link(ML) station. Other statistics, such as signal, rates,
are also managed at the link level only.
Statistics such as packets, bytes, signal, rates, etc are useful to
provide overall overview for the ML stations.
Statistics such as packets, bytes are accumulated statistics at MLO level.
However, MLO statistics for rates and signal can not be accumulated since
it won't make much sense. Hence, handle other statistics such as signal,
rates, etc bit differently at MLO level.
The signal could be the best of all links-
e.g. if Link 1 has a signal strength of -70 dBm and Link 2 has -65 dBm,
the signal for MLO will be -65 dBm.
The rate could be determined based on the most recently updated link-
e.g. if link 1 has a rate of 300 Mbps and link 2 has a rate of 450 Mbps,
the MLO rate can be calculated based on the inactivity of each link.
If the inactive time for link 1 is 20 seconds and for link 2 is 10 seconds,
the MLO rate will be the most recently updated rate, which is link 2's
rate of 450 Mbps.
The inactive time, dtim_period and beacon_interval can be taken as the
least value of field from link level.
Similarly, other MLO level applicable fields are handled and the fields
which don't make much sense at MLO level, a subsequent change will handle
to embed NL message.
Hence, add accumulated and other statistics for MLO station if valid links
are present to represent comprehensive overview for the ML stations.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-5-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, statistics is supported at deflink( or one of the links)
level for station. This has problems when applied to multi-link(ML)
connections.
Hence, add changes to support link level statistics to embed NL message
with link related information if valid links are present.
This will be helpful to check the link related statistics during MLO.
The statistics will be embedded into NL message as below:
For non-ML:
cmd->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
....etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
.........etc
For MLO:
cmd ->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
.......etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
........etc
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MLD_ADDR,
NL80211_ATTR_MLO_LINKS | nested
link_id-1 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
..........etc.
link_id-2 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
.........etc
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-4-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current implementation of NL80211_GET_STATION does not work for
multi-link operation(MLO) since in case of MLO only deflink (or one
of the links) is considered and not all links.
Therefore to support for MLO, add link_station_info structure
to account link level statistics for station.
Additionally, add valid_links in station_info structure to indicate
bitmap of valid links for MLO. This will be helpful to check the link
related statistics during MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-3-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, in supporting API's to fill sinfo structure from sta
structure, is mapped to fill the fields from sta->deflink. However,
for multi-link (ML) station, sinfo structure should be filled from
corresponding link_id.
Therefore, add link_id as an additional argument in supporting API's
for filling sinfo structure correctly. Link_id is set to -1 for non-ML
station and corresponding link_id for ML stations. In supporting API's
for filling sinfo structure, check for link_id, if link_id < 0, fill
the sinfo structure from sta->deflink, otherwise fill from
sta->link[link_id].
Current, changes are done at the deflink level i.e, pass -1 as link_id.
Actual link_id will be added in subsequent patches to support
station statistics for MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
Fixes: b2e8434f1829 ("wifi: mac80211: set up/tear down client vif links properly")
Link: https://patch.msgid.link/20250624130749.9a308b713c74.I4a80f5eead112a38730939ea591d2e275c721256@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a check to determine whether arp/nd offload enabling
request is allowed. If there is any interface acts as ap
mode and is operating, reject the request of arp offload
enabling from cfg80211.
Signed-off-by: Ting-Ying Li <tingying.li@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250606093444.15753-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Kory Maincent says:
====================
PSE: Improve documentation clarity
Thanks to new PSE driver being proposed on the mailinglist figured out
there was some unclear documentation, which lead the developer on the
wrong path. Clarify these documentation.
The changes focus on clarifying the setup_pi_matrix callback behavior
and improving device tree binding descriptions, particularly around
channel-to-PI mapping relationships that are critical for proper PSE
controller integration.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
====================
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-0-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve the setup_pi_matrix callback documentation to clarify its purpose
and usage. The enhanced description explains that PSE PI devicetree nodes
are pre-parsed before this callback is invoked, and drivers should utilize
pcdev->pi[x]->pairset[y].np to map PSE controller hardware ports to their
corresponding Power Interfaces.
This clarification helps driver implementers understand the callback's
role in establishing the hardware-to-PI relationship mapping.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-2-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve the channels property description to better explain the
relationship between physical delivery channels and PSE PI pairsets.
The previous description was unclear about how channels are referenced
and used in the port matrix mapping.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-1-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes: 83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix two OOB issues.
From: Kuniyuki Iwashima <kuniyu@google.com>
Recently, two issues are reported regarding MSG_OOB.
Patch 1 fixes issues that happen when multiple consumed OOB
skbs are placed consecutively in the recv queue.
Patch 2 fixes an inconsistent behaviour that close()ing a socket
with a consumed OOB skb at the head of the recv queue triggers
-ECONNRESET on the peer's recv().
v1: https://lore.kernel.org/netdev/20250618043453.281247-1-kuni1840@gmail.com/
====================
Link: https://patch.msgid.link/20250619041457.1132791-1-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A new function resetpair() calls close() for the receiver and checks
the return value from recv() on the initial sender side.
Now resetpair() is added to each test case and some additional test
cases.
Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided
not to touch TCP MSG_OOB code in the past.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer
# msg_oob.c:237:ex_oob_ex_oob:Expected:
# msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0)
# ex_oob_ex_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob
not ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# FAILED: 36 / 48 tests passed.
# Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:244:ex_oob_ex_oob:AF_UNIX :
# msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer
# OK msg_oob.no_peek.ex_oob_ex_oob
ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# PASSED: 48 / 48 tests passed.
# Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
1. send() and recv() an OOB data.
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> s1.send(b'x', MSG_OOB)
1
>>> s2.recv(1, MSG_OOB)
b'x'
2. close() for s2 sets ECONNRESET to s1->sk_err even though
s2 consumed the OOB data
>>> s2.close()
>>> s1.recv(10, MSG_DONTWAIT)
...
ConnectionResetError: [Errno 104] Connection reset by peer
Even after being consumed, the skb holding the OOB 1-byte data stays in
the recv queue to mark the OOB boundary and break recv() at that point.
This must be considered while close()ing a socket.
Let's skip the leading consumed OOB skb while checking the -ECONNRESET
condition in unix_release_sock().
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06
RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006
RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20
R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
__alloc_skb (net/core/skbuff.c:660 (discriminator 4))
alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668)
sock_alloc_send_pskb (net/core/sock.c:2993)
unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418)
__sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20))
__x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
unix_stream_read_generic (net/unix/af_unix.c:3010)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alexander Duyck says:
====================
Add support for 25G, 50G, and 100G to fbnic
The fbnic driver up till now had avoided actually reporting link as the
phylink setup only supported up to 40G configurations. This changeset is
meant to start addressing that by adding support for 50G and 100G interface
types.
With that basic support added fbnic can then set those types based on the
EEPROM configuration provided by the firmware and then report those speeds
out using the information provided via the phylink call for getting the
link ksettings. This provides the basic MAC support and enables supporting
the speeds as well as configuring flow control.
After this I plan to add support for a PHY that will represent the SerDes
PHY being used to manage the link as we need a way to indicate link
training into phylink to prevent link flaps on the PCS while the SerDes is
in training, and then after that I will look at rolling support for our
PCS/PMA into the XPCS driver.
====================
Link: https://patch.msgid.link/175028434031.625704.17964815932031774402.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Phylink already handles most of the pieces necessary for configuring
autonegotation. With that being the case we can add support for
getting/setting pause now by just passing through the ethtool call to the
phylink code.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/175028448974.625704.14427543910503058114.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change adds some basic support for reporting the current link config
to the user via ethtool. Currently the main components reported are the
carrier status, link speed, and FEC.
For now we are handling the FEC directly as phylink doesn't have support
for it. The plan is to work on incorporating FEC support into phylink and
eventually adding the ability for us to set the FEC configuration through
phylink itself.
In addition as we don't yet have SFP or PHY support the listed modes
supported are including ones not supported by the media we are attached to.
That will hopefully be addressed once we can get the QSFP modules
supported.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028448275.625704.60592644122010798.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The fbnic driver was using the XLGMII link mode to enable phylink, however
that mode wasn't the correct one to use as the NIC doesn't actually use
XLGMII, it is using a combinations of 25G, 50G, and 100G interface modes
and configuring those via pins exposed on the PCS, MAC, and PHY interfaces.
To more accurately reflect that we should drop the uxe of XGMII and XLGMII
and instead use the correct interface types.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028447568.625704.17971496887030109107.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make it so that the enum we use for the FW values represents actual link
modes that will be normally advertised by a link partner.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028446893.625704.10103673858068429312.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211]
Call Trace:
<IRQ>
rtl8187_tx_cb+0x116/0x150 [rtl8187]
__usb_hcd_giveback_urb+0x9d/0x120
usb_giveback_urb_bh+0xbb/0x140
process_one_work+0x19b/0x3c0
bh_worker+0x1a7/0x210
tasklet_action+0x10/0x30
handle_softirqs+0xf0/0x340
__irq_exit_rcu+0xcd/0xf0
common_interrupt+0x85/0xa0
</IRQ>
Tested on RTL8187BvE device.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c1db52b9d27e ("rtl8187: Use usb anchor facilities to manage urbs")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250617135634.21760-1-d.dulov@aladdin.ru
|
|
The way we were using "link_mode" was really more to describe the interface
between the attachment unit interface(s) we were using on the device.
Specifically the AUI is describing the modulation and the number of lanes
we are using. So we can simplify this by replacing link_mode with aui.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028446219.625704.8050098629750896117.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There were several issues in the way we were handling the link info coming
from firmware.
First is the fact that we were carrying around "AUTO" flags to indicate
that we needed to populate the values. We can just drop this and assume
that we will always be populating the settings from firmware. With this we
can also clean up the masking as the "AUTO" flags were just there to be
stripped anyway.
Second since we are getting rid of the "AUTO" setting we still need a way
to report that the link is not configured. We convert the link_mode "AUTO"
to "UNKNOWN" to do this. With this we can avoid reporting link up in the
phylink_pcs_get_state call as we will just set link to 0 and return without
updating the link speed. This is preferred versus the driver just forcing
50G which makes it harder to recover when the FW does start providing valid
settings.
With this the plan is to eventually replace the link_mode we use with the
interface_mode from phylink for all intents and purposes and have the two
be interchangeable. At that point we can convert the FW provided settings
over to something closer to link partner settings and give phylink greater
control of the interface allowing for user override of the settings and an
asynchronous setup of the link versus having to pull early settings from
firmware.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028445548.625704.1367708155813490215.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order for us to make use of the information in the PHY we need to verify
that the FW capabilities message has been processed. To do so we should
poll until the FW version in the capabilities message is at least at the
minimum level needed to verify that the FW can support the basic PHY config
messages.
As such this change adds logic so that we will poll the mailbox until such
time as the FW version can be populated with an acceptable value. If it
doesn't reach a sufficicient value the mailbox will be considered to have
timed out.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028444873.625704.10269838393153693403.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for 802.3cd based interface types 50GBASE-R and 100GBASE-P.
This choice in naming is based on section 135 of the 802.3-2022 IEEE
Standard.
In addition it is adding support for what I am referring to as LAUI
which is based on annex 135C of the IEEE Standard, and shares many
similarities with the 25/50G consortium. The main difference between the
two is that IEEE spec refers to LAUI as the AUI before the RS(544/514) FEC,
whereas the 25/50G use this lane and frequency combination after going
through RS(528/514), Base-R or no FEC at all.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028444205.625704.4191700324472974116.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
wl12xx_cmd_start_fwlog() was added in 2011 by
commit 95dac04f8813 ("wl12xx: Support routing FW logs to the host")
but has remained unused.
Remove it.
(I can see the 'stop' is used, and the 'config' is used, so I assume
the 'start' isn't normally needed).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250622232638.166283-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wl1251_cmd_read_memory() and wl1251_cmd_test() last use was removed in
2009 by
commit f298c282a523 ("wl1251: remove accidentally added wl1251_netlink.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250622172804.116396-3-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wl1251_acx_rate_policies() was added in 2009 by
commit 0e71bb084adc ("wl1251: remove wl1251_ops")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250622172804.116396-2-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function `_rtl_pci_init_one_rxdesc()` can fail even when the new
`skb` is passed because of a DMA mapping error. If it fails, the `skb`
is not saved in the rx ringbuffer and thus lost.
Compile tested only
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616105631.444309-4-fourier.thomas@gmail.com
|
|
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Userspace tools will parse NL80211_BSS_LAST_SEEN_BOOTTIME (if any) for a
more accurate timing when a BSS was seen. For example, iw, wpa_supplicant.
For beacon and probe response, fill RX boottime_ns in ieee80211_rx_status.
And for certain, it shouldn't count the waiting time for the PPDU status,
i.e. the possible buffering time of a frame in driver.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-6-pkshih@realtek.com
|
|
unsupported 6 GHz band
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
The following is a crash log for this case.
BUG: kernel NULL pointer dereference, address: 0000000000000032
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4)
Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024
RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core]
Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11
41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45
32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85
RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246
RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011
RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6
RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000
R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4
R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)]
__iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)]
rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)]
rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)]
Fixes: c6aa9a9c4725 ("wifi: rtw89: add RNR support for 6 GHz scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-5-pkshih@realtek.com
|
|
Correct the length when parsing with 2nd IE header and the length
of IE18/19 PHY status report. These two IE contain PHY OFDM signal
information and can be used for debug.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-4-pkshih@realtek.com
|
|
EDCCA report is obtained from the hardware to display OBSS interference
and their respective power levels for each subband. Modify the query
settings to improve resolution for debugging purposes.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-3-pkshih@realtek.com
|
|
When debugging or recovering system error recovery (SER), it's
necessary to dump internal memory to perform status inspection.
Since the memory page size differs between WiFi 6 and 7 chips,
define them accordingly.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-2-pkshih@realtek.com
|
|
The version 9 support the WiFi7 related functions.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-12-pkshih@realtek.com
|
|
Add format version of Wi-Fi firmware commands/events for firmware
version v0.29.122.0.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-11-pkshih@realtek.com
|
|
If Wi-Fi isn't connected to AP, the firmware scan will not switch to
operation channel. Bluetooth may not have enough time to TX data. This
patch extend the slot to let Bluetooth can TX more to avoid audio lag.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-10-pkshih@realtek.com
|
|
If the duration set to zero, Wi-Fi firmware will trigger some unexpected
issue when firmware try to enable timer.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-9-pkshih@realtek.com
|
|
When Wi-Fi firmware scan, it will update the priority tables, and if
stay at these priority tables then enter power saving will trigger
Bluetooth issues. So update the priority before entering power saving.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-8-pkshih@realtek.com
|
|
When platform resume, there will have fail rate when Bluetooth try to
re-link. And when Bluetooth is booting up, it will run the ROM code
first, then load the firmware code from file. Catch this change and
set the mechanism for Bluetooth re-link.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-7-pkshih@realtek.com
|
