| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the DSP core from i.MX8QM/i.MX8QXP is able to operate while the
firmware image is being loaded. Because of this, the DSP may change the
content of the firmware data just after it was loaded, thus leading to the
data having unexpected values when the DSP is reset (via run()).
Fix this by implementing the core_shutdown() operation that will put the
DSP in stall during suspend(). The stall will be removed during the run()
opertion, thus guaranteeing that the DSP core will not be able to run
while the firmware image is being loaded.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250613194310.1128733-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an entry to remap my Red Hat address.
Link: https://lore.kernel.org/r/20250614092054.161658-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The assert in function file_seek_cur_needs_f_lock() can be triggered very
easily because there are many users of vfs_llseek() (such as overlayfs)
that do their custom locking around llseek instead of relying on
fdget_pos(). Just drop the overzealous assertion.
Fixes: da06e3c51794 ("fs: don't needlessly acquire f_lock")
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://lore.kernel.org/20250613101111.17716-1-luis@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The gpio-spacemit-k1 driver can be compiled as a module. Add missing
MODULE_DEVICE_TABLE so it can be matched by modalias and automatically
loaded by udev.
Fixes: d00553240ef8 ("gpio: spacemit: add support for K1 SoC")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250613-k1-gpio-of-table-v1-1-9015da8fdfdb@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In the before experience there are many issue occurred because of the
grant control signal can not be set in time especially WiFi power save
enter/leave. To control the signal more accuracy, offload the control
to firmware.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-11-pkshih@realtek.com
|
|
WiFi 7 generation has 2 MAC, the PTA should bind the input/output to
correct MAC to do the packet arbitration as expected.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-10-pkshih@realtek.com
|
|
BTG means a path work for Bluetooth & Wi-Fi 2.4GHz. To earn a better
coexistence performance, need to do some RF setting for BTG path.
WiFi 7 generation offload the feature to firmware, to get a more
accuracy control. And decrease driver I/O.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-9-pkshih@realtek.com
|
|
Pre-AGC is Wi-Fi auto Rx gain control. The mechanism need to switching
very fast, especially while Wi-Fi is under 2GHz/5GHz multi-port scenario.
To earn a more accuracy & sensitive gain control, in the WiFi 7 later
firmware, Pre-AGC mechanism has offloaded to firmware.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-8-pkshih@realtek.com
|
|
to firmware
In order to reduce driver I/O & some detail instant hardware control, some
of the necessary API offload to Wi-Fi firmware. Collect the reference
parameters to let firmware do decisions.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-7-pkshih@realtek.com
|
|
Fix unexpected line warp. Collect firmware report format version and
driver support report format version code to check unexpected C2H report
exception.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-6-pkshih@realtek.com
|
|
Because WiFi 7 generation has dual MAC, logic need to assign & save
the information to correct index. Update the related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-5-pkshih@realtek.com
|
|
To make the logic can work well with WiFi 7 & before generations,
extend & add logic for WiFi 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-4-pkshih@realtek.com
|
|
There were some driver API offloaded to firmware, and to recognize the
feature add a version tag for it.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-3-pkshih@realtek.com
|
|
Add Wi-Fi 7 MLO related multi-role (MR) chanctx descriptors and query
function. They are designed for other components, e.g. coex, which are
interested in the following info.
* whether a MLD exists and how many active link
* the number of AP mode and station mode respectively
* how many chanctx and the number of 2/5/6 GHz respectively
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-2-pkshih@realtek.com
|
|
If scan happen during start_ap, the register which control TX might be
turned off during scan. Additionally, if set_channel occurs during scan
will backup this register and set to firmware after set_channel done.
When scan complete, firmware will also set TX by this register, causing
TX to be disabled and beacon can't be TX. Therefore, in assign/unassign_vif
call scan abort before set_channel to avoid scan racing with set_channel.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-13-pkshih@realtek.com
|
|
The auth retry only continue 40ms, but the GO might switch to STA role
50ms when MCC. Therefore, enlarge the TX retry count from 32 to 60 to
let GC TX time overlapping with GO timeslot.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-12-pkshih@realtek.com
|
|
When the beacon offset is less than minimum of auxiliary tob
(aux->duration - aux->limit.max_toa), the upper bound of the reference
toa might be negative and lower than the lower bound, which causes the
auxiliary result to exceed the NoA limit. Therefore, in this case, the
anchor pattern is used for calculation.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-11-pkshih@realtek.com
|
|
Clear NoA setting before MCC starts. Otherwise, nulldata will be
blocked to TX because firmware use the normal flow NoA to calculate
timing.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-10-pkshih@realtek.com
|
|
In original scan, the scan time only 45ms. The GO in MCC mode only
stay 50ms and switch to STA role 50ms, which might cause GC can't scan
GO. Therefore, enlarge scan time to 105ms to ensure GC have time
overlapping with GO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-9-pkshih@realtek.com
|
|
Adjust TX nulldata early time to let nulldata have more contention time
to TX. Otherwise, AP is hard to receive nulldata 1, which causes the
throughput test failed due to packet drops.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-8-pkshih@realtek.com
|
|
HW scan leak to TX nulldata 0 to AP after scan completed, which allowed
AP start to TX packet to us. Therefore, driver TX nulldata 0 after scan
completed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-7-pkshih@realtek.com
|
|
Stop TX during the MCC configuration period to prevent packet leakage.
The stop time is defined as 'start_tsf - tsf', which means the duration
from when MCC configuration begins until MCC starts.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-6-pkshih@realtek.com
|
|
MCC needs to wait at most 300ms to start. Additionally, if
scanning happens before MCC starts, it will miss some beacons,
which might cause beacon loss. Therefore, we reset beacon
filter when MCC start to let hardware reset beacon loss counter.
Additionally, GO is forbid to enter courtesy mode might cause
STA beacon loss. Therefore, disable beacon filter when GO+STA.
However, In WiFi 7 chip, even when GC+STA enable courtesy mode, the
beacon might loss because switching to courtesy timeslot will disable
TX/RX. If the TOB(time offset behind) or TOA(time offset ahead) is
too close to the edge of timeslot, the beacon might not be received.
Therefore, disable beacon filter when GC+STA in WiFi 7 chip.
Because disabling the beacon filter might prevent disconnection
when the AP power-off without sending a deauth. Therefore, driver
TX QOS nulldata periodically to detect the AP status, and the
connection is terminated if no ACK is received for 6 seconds.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-5-pkshih@realtek.com
|
|
The frequency get from PPDU status set as center channel during MCC,
but we need to report to mac80211 as primary channel. Therefore, we
use the chanctx information in software to instead it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-4-pkshih@realtek.com
|
|
The RF notify MCC H2C command format of 8852C different from other
chip, therefore add v0 format to update it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-3-pkshih@realtek.com
|
|
HW scan flow has considered the timing when to get back op for the scanning
interface. But, when concurrency, there are two interfaces with connection.
The OP channel of another one was not back originally. It then easily lead
to connection loss when scanning during concurrency. So, HW scan flow is
extended to deal with second OP channel. And, H2C command is also extended
to fill second MAC ID.
The changes mentioned above are done for WiFi 6 chips first. HW scan has
different handling architectures including FW and driver on WiFi 7 chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-2-pkshih@realtek.com
|
|
BXT_MIPI_TRANS_VTOTAL must be programmed with vtotal-1
instead of vtotal. Make it so.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314150136.22564-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7b3685c9b38c3097f465efec8b24dbed63258cf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
(cherry picked from commit 686d773186bf72b739bab7e12eb8665d914676ee)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When `dma_mapping_error()` is true, if a new `skb` has been allocated,
then it must be de-allocated.
Compile tested only
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250613074014.69856-2-fourier.thomas@gmail.com
|
|
Don't populate the read-only array params on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611135521.172521-1-colin.i.king@gmail.com
|
|
txpower_info_{2g,5g} are too big to fit on the stack, but in most of the
rtlwifi variants this stays below the warning limit for stack frames.
In rtl8192ee and a few others, I see a case where clang decides to fully
inline this into rtl92ee_read_eeprom_info, triggering this warning:
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c:2178:6: error: stack frame size (1312) exceeds limit (1280) in 'rtl92ee_read_eeprom_info' [-Werror,-Wframe-larger-than]
Mark _rtl92ee_read_txpower_info_from_hwpg() as noinline_for_stack to
and mark _rtl92ee_get_chnl_group() as __always_inline to make clang
behave the same way as gcc. Inlining _rtl92ee_get_chnl_group helps
let the compiler see that the index is always in range. The same
change appears to be necessary in all rtlwifi variants.
A more thorough approach would be to avoid the use of the two structures
on the stack entirely and combine them with the struct rtl_efuse
data that is dynamically allocated and holds the same information.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610092240.2639751-1-arnd@kernel.org
|
|
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
When KASAN is disabled, the stack usage is roughly quartered:
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
Using '-Rpass-analysis=stack-frame-layout' shows the following variables
and many, many 8-byte spills when KASAN is enabled:
Offset: [SP-144], Type: Variable, Align: 8, Size: 40
Offset: [SP-464], Type: Variable, Align: 8, Size: 320
Offset: [SP-784], Type: Variable, Align: 8, Size: 320
Offset: [SP-864], Type: Variable, Align: 32, Size: 80
Offset: [SP-896], Type: Variable, Align: 32, Size: 32
Offset: [SP-1016], Type: Variable, Align: 8, Size: 120
When KASAN is disabled, there are still spills but not at many and the
variables list is smaller:
Offset: [SP-192], Type: Variable, Align: 32, Size: 80
Offset: [SP-224], Type: Variable, Align: 32, Size: 32
Offset: [SP-344], Type: Variable, Align: 8, Size: 120
Disable KASAN for this file when using clang-17 or older to avoid
blowing out the stack, clearing up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Annotate various keys, ivs, and other byte arrays with __nonstring so
that static initializers will not complain about truncating the trailing
NUL byte under GCC 15 with -Wunterminated-string-initialization enabled.
Silences many warnings like:
../lib/crypto/aesgcm.c:642:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (13 chars into 12 available) [-Wunterminated-string-initialization]
642 | .iv = "\xca\xfe\xba\xbe\xfa\xce\xdb\xad"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529173113.work.760-kees@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
|
|
Add missing put_task_struct() in the error path
Cc: stable@vger.kernel.org
Fixes: 0f8baa3c9802 ("io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250615163906.2367-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
|
|
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7b9
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7b9 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This hides excessive warnings, as nobody builds with W=2.
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
|
|
syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt
that's too big:
WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
Modules linked in:
CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
lr : __do_kmalloc_node mm/slub.c:-1 [inline]
lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012
sp : ffff80009cfd7a90
x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0
x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000
x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8
x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005
x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000
x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938
x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000
x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001
Call trace:
__kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P)
kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline]
io_rsrc_data_alloc io_uring/rsrc.c:206 [inline]
io_clone_buffers io_uring/rsrc.c:1178 [inline]
io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287
__io_uring_register io_uring/register.c:815 [inline]
__do_sys_io_uring_register io_uring/register.c:926 [inline]
__se_sys_io_uring_register io_uring/register.c:903 [inline]
__arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
which is due to offset + buffer_count being too large. The registration
code checks only the total count of buffers, but given that the indexing
is an array, it should also check offset + count. That can't exceed
IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond
that limit.
There's no issue with registrering a table this large, outside of the
fact that it's pointless to register buffers that cannot be reached, and
that it can trigger this kmalloc() warning for attempting an allocation
that is too large.
Cc: stable@vger.kernel.org
Fixes: b16e920a1909 ("io_uring/rsrc: allow cloning at an offset")
Reported-by: syzbot+cb4bf3cb653be0d25de8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/684e77bd.a00a0220.279073.0029.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add ethqos_pcs_set_inband() to improve readability, and to allow future
changes when phylink PCS support is properly merged.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1uPkbO-004EyA-EU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phys_port_id_show, phys_port_name_show and phys_switch_id_show would
return -EOPNOTSUPP if the netdev didn't implement the corresponding
method.
There is no point in creating these files if they are unsupported.
Put these attributes in netdev_phys_group and implement the is_visible
method. make phys_(port_id, port_name, switch_id) invisible if the netdev
dosen't implement the corresponding method.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612142707.4644-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the way firmware names are handled for the ICSSG PRUETH driver.
Instead of using hardcoded firmware name arrays for different modes (EMAC,
SWITCH, HSR), the driver now reads the firmware names from the device tree
property "firmware-name". Only the EMAC firmware names are specified in the
device tree property. The firmware names for all other supported modes are
generated dynamically based on the EMAC firmware names by replacing
substrings (e.g., "eth" with "sw" or "hsr") as appropriate.
Example: Below are the firmwares used currently for PRU0 core
EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf
SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf
HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf
All three firmware names are same except for the operating mode.
In general for PRU0 core, firmware name is,
ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf
Since the EMAC firmware names are defined in DT, driver will read those
directly and for other modes swap the mode name. i.e. eth -> sw or
eth -> hsr.
This preserves backwards compatibility as ICSSG driver is supported only
by AM65x and AM64x. Both of these have "firmware-name" property
populated in their device tree.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250613102014.3070898-1-liyuesong@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb client fixes from Steve French:
- SMB3.1.1 POSIX extensions fix for char remapping
- Fix for repeated directory listings when directory leases enabled
- deferred close handle reuse fix
* tag 'v6.16-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: improve directory cache reuse for readdir operations
smb: client: fix perf regression with deferred closes
smb: client: disable path remapping with POSIX extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fix from Joerg Roedel:
- Fix PTE size calculation for NVidia Tegra
* tag 'iommu-fixes-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra: Fix incorrect size calculation
|
|
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fix from Miguel Ojeda:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called
* tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: Fix compile error in impl_has_hr_timer macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
|
|
We want to WARN_ON() if info is NULL.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 0838fc3e6718 ("drm/msm/adreno: Check for recognized GPU before bind")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/658631/
|
