| Age | Commit message (Collapse) | Author |
|---|
|
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
dma_map_sg return 0 on error, fix the error check, and return -EIO
to caller.
Fixes: dbc049eee730 ("mailbox: Add driver for Broadcom FlexRM ring manager")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
IPQ8074 has the APSS clock controller utilizing the same register space as
the APCS, so provide access to the APSS utilizing a child device like
IPQ6018.
IPQ6018 and IPQ8074 use the same controller and driver, so just utilize
IPQ6018 match data for IPQ8074.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
IPQ6018 APSS driver is registered by APCS as they share the same register
space, and it uses "pll" and "xo" as inputs.
Correct the allowed clocks for IPQ6018 and IPQ8074 as they share the same
driver to allow "pll" and "xo" as clock-names.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
IPQ6018 and IPQ8074 require #clock-cells to be set to 1 as their APSS
clock driver provides multiple clock outputs.
So allow setting 1 as #clock-cells and check that its set to 1 for IPQ6018
and IPQ8074, check others for 0 as its currently.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mailbox offset is not only used for receiving messages, but it is
also used by messages sent to the system controller by Linux that have a
payload, such as the "digital signature service". It is also overloaded
by certain other services (reprogramming of the FPGA fabric, see Link:)
to have a meaning other than the offset the system controller should
read from.
When the driver was written, no such services of the latter type were
in use & those of the former used an offset of zero so this has gone
un-noticed.
Link: https://www.microsemi.com/document-portal/doc_download/1245815-polarfire-fpga-and-polarfire-soc-fpga-system-services-user-guide # Section 5.2
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control". Optionally get the "data" register address
from the 3rd reg property in the devicetree & fall back to using the
old base + MAILBOX_REG_OFFSET that the current code uses.
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control".
Fixes: 213556235526 ("dt-bindings: soc/microchip: update syscontroller compatibles")
Fixes: ed9543d6f2c4 ("dt-bindings: add bindings for polarfire soc mailbox")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Because IMX_MU_xCR_MAX was increased to 5, some mu cfgs were not updated
to include the CR register. Add the missed CR register to xcr array.
Fixes: 82ab513baed5 ("mailbox: imx: support RST channel")
Reported-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8qm/qxp MEK boards boot
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the
snapshot buffer at boot up for use later. The ftrace_boot_snapshot in
particular requires the snapshot to be allocated because it will take a
snapshot at the end of boot up allowing to see the traces that happened
during boot so that it's not lost when user space takes over.
When a tracer is registered (started) there's a path that checks if it
requires the snapshot buffer or not, and if it does not and it was
allocated it will do a synchronization and free the snapshot buffer.
This is only required if the previous tracer was using it for "max
latency" snapshots, as it needs to make sure all max snapshots are
complete before freeing. But this is only needed if the previous tracer
was using the snapshot buffer for latency (like irqoff tracer and
friends). But it does not make sense to free it, if the previous tracer
was not using it, and the snapshot was allocated by the cmdline
parameters. This basically takes away the point of allocating it in the
first place!
Note, the allocated snapshot worked fine for just trace events, but fails
when a tracer is enabled on the cmdline.
Further investigation, this goes back even further and it does not require
a tracer on the cmdline to fail. Simply enable snapshots and then enable a
tracer, and it will remove the snapshot.
Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated")
Reported-by: Ross Zwisler <zwisler@kernel.org>
Tested-by: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Weak functions started causing havoc as they showed up in the
"available_filter_functions" and this confused people as to why some
functions marked as "notrace" were listed, but when enabled they did
nothing. This was because weak functions can still have fentry calls, and
these addresses get added to the "available_filter_functions" file.
kallsyms is what converts those addresses to names, and since the weak
functions are not listed in kallsyms, it would just pick the function
before that.
To solve this, there was a trick to detect weak functions listed, and
these records would be marked as DISABLED so that they do not get enabled
and are mostly ignored. As the processing of the list of all functions to
figure out what is weak or not can take a long time, this process is put
off into a kernel thread and run in parallel with the rest of start up.
Now the issue happens whet function tracing is enabled via the kernel
command line. As it starts very early in boot up, it can be enabled before
the records that are weak are marked to be disabled. This causes an issue
in the accounting, as the weak records are enabled by the command line
function tracing, but after boot up, they are not disabled.
The ftrace records have several accounting flags and a ref count. The
DISABLED flag is just one. If the record is enabled before it is marked
DISABLED it will get an ENABLED flag and also have its ref counter
incremented. After it is marked for DISABLED, neither the ENABLED flag nor
the ref counter is cleared. There's sanity checks on the records that are
performed after an ftrace function is registered or unregistered, and this
detected that there were records marked as ENABLED with ref counter that
should not have been.
Note, the module loading code uses the DISABLED flag as well to keep its
functions from being modified while its being loaded and some of these
flags may get set in this process. So changing the verification code to
ignore DISABLED records is a no go, as it still needs to verify that the
module records are working too.
Also, the weak functions still are calling a trampoline. Even though they
should never be called, it is dangerous to leave these weak functions
calling a trampoline that is freed, so they should still be set back to
nops.
There's two places that need to not skip records that have the ENABLED
and the DISABLED flags set. That is where the ftrace_ops is processed and
sets the records ref counts, and then later when the function itself is to
be updated, and the ENABLED flag gets removed. Add a helper function
"skip_record()" that returns true if the record has the DISABLED flag set
but not the ENABLED flag.
Link: https://lkml.kernel.org/r/20221005003809.27d2b97b@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: b39181f7c6907 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When compat mode isn't supported(I believe this is the most case now),
kernel will emit somthing as:
[ 0.050407] riscv: ELF compat mode failed
This msg may make users think there's something wrong with the kernel
itself, replace "failed" with "unsupported" to make it clear. In fact
this is the real compat_mode_supported meaning. After the patch, the
msg would be:
[ 0.050407] riscv: ELF compat mode unsupported
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220821141819.3804-1-jszhang@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
GNU Make 3.81 fails in CONFIG_RUST=y builds.
rust/Makefile:105: *** multiple target patterns. Stop.
make[1]: *** [prepare] Error 2
make: *** [__sub-make] Error 2
The error message is unclear, but the reason is because the 'private'
keyword is only supported since GNU Make 3.82.
GNU Make 3.81 is still able to build the kernel when CONFIG_RUST is
disabled, but it might be a good timing to raise the minimal GNU Make
version. Perhaps, I am the last person who was testing GNU Make 3.81.
GNU Make 3.81 was released in 2006, GNU Make 3.82 in 2010.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Don't initialize the rc as its value is being overwritten before its
use.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
member in structs negotiate_req and extended_response, and refactor the
rest of the code, accordingly.
Also, make use of the DECLARE_FLEX_ARRAY() helper to declare flexible
array member EncryptionKey in union u. This new helper allows for
flexible-array members in unions.
Change pointer notation to proper array notation in a call to memcpy()
where flexible-array member DialectsArray is being used as destination
argument.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/229
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers can return an empty network interface list so, unless
multichannel is requested, no need to log an error for this, and
when multichannel is requested on mount but no interfaces, log
something less confusing. For this case change
parse_server_interfaces: malformed interface info
to
empty network interface list returned by server localhost
Also do not relog this error every ten minutes (only log on mount, once)
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- Use the for_each_pci_dev() helper instead of open-coding it (Yang
Yingliang)
* pci/misc:
PCI/P2PDMA: Use for_each_pci_dev() helper
|
|
- Add macros for PCI Configuration Mechanism #1 and use them in the
ftpci100, mt7621, and tegra drivers (Pali Rohár)
* remotes/lorenzo/pci/misc:
PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
PCI: Add standard PCI Config Address macros
|
|
- List platforms that use a single MSI host interrupt in qcom DT (Johan
Hovold)
- Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold)
- Make all optional clocks truly optional in the driver (Johan Hovold)
- Rename per-IP structs to reflect the IP version (Johan Hovold)
- Sort device ID match table by compatible string (Johan Hovold)
- Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov)
- Drop the unused .post_deinit() callback (Johan Hovold)
- Rely on DT for clock information instead of hard-coding it in the driver
(Manivannan Sadhasivam)
- Disable IRQs when removing driver to avoid spurious IRQs later
(Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug issues with
low-power states (Manivannan Sadhasivam)
- Gate Master AXI clock to the MHI bus while in L1 substates to save power
(Manivannan Sadhasivam)
- Disable Master AXI clock to save power when there is no traffic on PCIe
(Manivannan Sadhasivam)
- Make the "PERST separation" debug feature optional in the DT and the
driver (Manivannan Sadhasivam)
- Define clocks to be per-platform in DT to prepare for future SoCs
(Manivannan Sadhasivam)
- Add SM8450 SoC support (Manivannan Sadhasivam)
- Check for platform_get_resource_byname() to avoid a NULL pointer
dereference (Yang Yingliang)
* pci/qcom:
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
PCI: qcom: Rename host-init error label
PCI: qcom: Drop unused post_deinit callback
PCI: qcom-ep: Add MODULE_DEVICE_TABLE
PCI: qcom: Sort device-id table
PCI: qcom: Clean up IP configurations
PCI: qcom: Make all optional clocks optional
PCI: qcom: Add support for SA8540P
PCI: qcom: Add support for SC8280XP
dt-bindings: PCI: qcom: Add SA8540P to binding
dt-bindings: PCI: qcom: Add SC8280XP to binding
dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
|
|
- Fix endianness of emulated bridge iolimitupper, iobaseupper, memlimit and
membase members (Pali Rohár)
* remotes/lorenzo/pci/mvebu:
PCI: mvebu: Fix endianness when accessing PCI emul bridge members
|
|
- Rename the pcie-mediatek-gen3 driver from 'mtk-pcie' to 'mtk-pcie-gen3'
so it can coexist with the pcie-mediatek driver, which also uses
'mtk-pcie' (Felix Fietkau)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
|
|
- Use dmam_alloc_coherent() instead of dma_map_page() to allocate the MSI
target page, which means dwc drivers will work even when ZONE_DMA32 is
disabled (Will McVicker)
- If we can't allocate an MSI target page with a 32-bit address, try
allocating one with a 64-bit address (Will McVicker)
- Switch from of_gpio_named_count() to generic gpiod_count() (Andy
Shevchenko)
- Add support for i.MX8MP PCIe (Richard Zhu)
- Fix the Freescale i.MX8 PHY driver, which had interchanged the phy_init()
and phy_power_on() interfaces (Richard Zhu)
* remotes/lorenzo/pci/dwc:
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
PCI: imx6: Add i.MX8MP PCIe support
PCI: dwc: Replace of_gpio_named_count() by gpiod_count()
PCI: dwc: Drop dependency on ZONE_DMA32
|
|
- Add MT8188 and MT8195 to mediatek-gen3 DT binding (Jianjun Wang)
- Add 'clock-names' back to fu740 DT binding (Conor Dooley)
- Add 'clocks', 'clock-names', 'dma-ranges' to microchip DT binding (Conor
Dooley)
- Add 'aggre0' and 'aggre1' clocks to qcom DT binding (Krishna chaitanya
chundru)
* remotes/lorenzo/pci/dt:
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
dt-bindings: PCI: microchip,pcie-host: fix missing dma-ranges
dt-bindings: PCI: microchip,pcie-host: fix missing clocks properties
dt-bindings: PCI: fu740-pci: fix missing clock-names
dt-bindings: PCI: mediatek-gen3: Add support for MT8188 and MT8195
|
|
- In an emulated PCI bridge, set Capability offsets so they match the
hardware offsets shown by U-Boot (Pali Rohár)
* remotes/lorenzo/pci/bridge-emul:
PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
|
|
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry
Torokhov)
* remotes/lorenzo/pci/apple:
PCI: apple: Do not leak reset GPIO on unbind/unload/error
|
|
- Emulate the PCI Bridge Subsystem Vendor ID (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge
|
|
- Distribute resources to unconfigured hotplug bridges at boot-time (not
just when hot-adding such a bridge), which makes hot-adding devices to
docks work (Mika Westerberg)
- Fix the "revert to firmware assignment" code so we do the revert only if
the address is actually reachable. Previously we sometimes assigned
addresses that could not be reached via upstream bridges (Maciej W.
Rozycki)
* pci/resource:
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
PCI: Fix typo in pci_scan_child_bus_extend()
PCI: Fix whitespace and indentation
PCI: Distribute available resources for root buses, too
PCI: Move pci_assign_unassigned_root_bus_resources()
PCI: Pass available buses even if the bridge is already configured
PCI: Fix used_buses calculation in pci_scan_child_bus_extend()
|
|
- Expose a sysfs interface for configuring Resizable BARs so we can resize
BARs before assigning devices to a VM through VFIO (Alex Williamson)
* pci/rebar:
PCI: Expose PCIe Resizable BAR support via sysfs
|
|
- Cache the PTM capability offset instead of searching for it every time
(Bjorn Helgaas)
- Separate PTM configuration from PTM enable (Bjorn Helgaas)
- Add pci_suspend_ptm() and pci_resume_ptm() to disable and re-enable PTM
on suspend/resume so some Root Ports can safely enter a lower-power PM
state (Bjorn Helgaas)
- Disable PTM for all devices during suspend; previously we only did this
for Root Ports and even then only in certain cases (Bjorn Helgaas)
- Simplify pci_pm_suspend_noirq() (Rajvi Jingar)
- Reduce the delay after transitions to/from D3hot by using usleep_range()
instead of msleep(), which reduces the typical delay from 19ms to 10ms
(Sajid Dalvi, Will McVicker)
* pci/pm:
PCI/PM: Reduce D3hot delay with usleep_range()
PCI/PM: Simplify pci_pm_suspend_noirq()
PCI/PM: Always disable PTM for all devices during suspend
PCI/PTM: Consolidate PTM interface declarations
PCI/PTM: Reorder functions in logical order
PCI/PTM: Preserve RsvdP bits in PTM Control register
PCI/PTM: Move pci_ptm_info() body into its only caller
PCI/PTM: Add pci_suspend_ptm() and pci_resume_ptm()
PCI/PTM: Separate configuration and enable
PCI/PTM: Add pci_upstream_ptm() helper
PCI/PTM: Cache PTM Capability offset
|
|
- Correct a typo in 71020a3c0dff4 ('PCI/MSI: Use msi_add_msi_desc()') that
reversed the sense of 'can_mask' in msi_add_msi_desc() (Josef Johansson)
* pci/msi:
PCI/MSI: Correct 'can_mask' test in msi_add_msi_desc()
|
|
- Work around a BIOS defect that makes some Intel Root Ports report an RP
PIO log size of zero (Mika Westerberg)
* pci/dpc:
PCI/DPC: Quirk PIO log size for certain Intel Root Ports
|
|
- Save L1 PM Substates Capability across suspend/resume so L1SS keeps
working after resume (Vidya Sagar)
- If device lacks L1 PM Substates Capability, don't read junk and treat it
as such a Capability (Bjorn Helgaas)
- Fix the LTR_L1.2_THRESHOLD computation, which previously configured the
threshold for entering L1.2 to be lower than intended, so L1.2 could be
used when it shouldn't be (Bjorn Helgaas)
* pci/aspm:
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
|
|
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL
pointer, which causes a NULL pointer dereference when it is used in
qcom_pcie_perst_deassert().
Check the return value to prevent it.
Link: https://lore.kernel.org/r/20220429080740.1294797-1-yangyingliang@huawei.com
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
|
|
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller
driver. The driver uses the same config as the existing SDX55 chipset,
so additional settings are not required.
Link: https://lore.kernel.org/r/20220914075350.7992-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add devicetree bindings support for SM8450 SoC. Only the clocks are
different on this platform, rest is same as SDX55.
Link: https://lore.kernel.org/r/20220914075350.7992-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
In preparation for adding the bindings for future SoCs, define the
clocks per platform.
Link: https://lore.kernel.org/r/20220914075350.7992-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.
Make the property optional in the driver.
Link: https://lore.kernel.org/r/20220914075350.7992-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.
Remove the corresponding property "qcom,perst-regs" from the required
properties list.
Link: https://lore.kernel.org/r/20220914075350.7992-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The Master AXI clock can be disabled when it is not used i.e., when there
is no traffic on the PCIe bus. This helps to save power during idle state.
[bhelgaas: tidy and wrap comment]
Link: https://lore.kernel.org/r/20220914075350.7992-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This reverts dbf8e63f48af ("f2fs: remove device type check for direct IO"),
and apply the below first version, since it contributed out-of-order DIO writes.
For zoned devices, f2fs forbids direct IO and forces buffered IO
to serialize write IOs. However, the constraint does not apply to
read IOs.
Cc: stable@vger.kernel.org
Fixes: dbf8e63f48af ("f2fs: remove device type check for direct IO")
Signed-off-by: Eunhee Rho <eunhee83.rho@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
cpp_check reports
[drivers/power/supply/ab8500_chargalg.c:493]: (style) Variable 'ab8500_chargalg_ex_ac_enable_toggle' is assigned a value that is never used.
From inspection, this variable is never used. So remove it.
Fixes: 6c50a08d9dd3 ("power: supply: ab8500: Drop external charger leftovers")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chen Lifu <chenlifu@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
net/sunrpc/xprtrdma/frwr_ops.c:151:32: warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
trace_xprtrdma_frwr_alloc(mr, rc);
^~
net/sunrpc/xprtrdma/frwr_ops.c:127:8: note: initialize the variable 'rc' to silence this warning
int rc;
^
= 0
1 warning generated.
The tracepoint is intended to record the error returned from
ib_alloc_mr(). In the current code there is no other purpose for
@rc, so simply replace it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d8cf39a280c3b0 ('xprtrdma: MR-related memory allocation should be allowed to fail')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Many memory allocations that xprtrdma does can fail safely. Let's
use this fact to avoid some potential deadlocks: Replace GFP_KERNEL
with GFP flags that do not try hard to acquire memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
An attempt to establish a connection can always fail and then be
retried. GFP_KERNEL allocation is not necessary here.
Like MR allocation, establishing a connection is always done in a
worker thread. The new GFP flags align with the flags that would
be returned by rpc_task_gfp_mask() in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
xprtrdma always drives a retry of MR allocation if it should fail.
It should be safe to not use GFP_KERNEL for this purpose rather
than sleeping in the memory allocator.
In theory, if these weaker allocations are attempted first, memory
exhaustion is likely to cause xprtrdma to fail fast and not then
invoke the RDMA core APIs, which still might use GFP_KERNEL.
Also note that rpc_task_gfp_mask() always sets __GFP_NORETRY and
__GFP_NOWARN when an RPC-related allocation is being done in a
worker thread. MR allocation is already always done in worker
threads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Currently all rpcrdma_regbuf_alloc() call sites pass the same value
as their third argument. That argument can therefore be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 1769e6a816df ("xprtrdma: Clean up rpcrdma_create_req()")
added rpcrdma_req_create() with a GFP flags argument in case a
caller might want to avoid waiting for memory.
There has never been a caller that does not pass GFP_KERNEL as
the third argument. That argument can therefore be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
xprt_rdma_bc_allocate() is now the only user of RPCRDMA_DEF_GFP.
Replace that macro with the raw flags.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
While setting up a new lab, I accidentally misconfigured the
Ethernet port for a system that tried an NFS mount using RoCE.
This made the NFS server unreachable. The following WARNING
popped on the NFS client while waiting for the mount attempt to
time out:
kernel: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAI>
kernel: WARNING: CPU: 0 PID: 100 at kernel/workqueue.c:2628 check_flush_dependency+0xbf/0xca
kernel: Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs 8021q garp stp mrp llc rfkill rpcrdma>
kernel: CPU: 0 PID: 100 Comm: kworker/u8:8 Not tainted 6.0.0-rc1-00002-g6229f8c054e5 #13
kernel: Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017
kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma]
kernel: RIP: 0010:check_flush_dependency+0xbf/0xca
kernel: Code: 75 2a 48 8b 55 18 48 8d 8b b0 00 00 00 4d 89 e0 48 81 c6 b0 00 00 00 48 c7 c7 65 33 2e be>
kernel: RSP: 0018:ffffb562806cfcf8 EFLAGS: 00010092
kernel: RAX: 0000000000000082 RBX: ffff97894f8c3c00 RCX: 0000000000000027
kernel: RDX: 0000000000000002 RSI: ffffffffbe3447d1 RDI: 00000000ffffffff
kernel: RBP: ffff978941315840 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 00000000000008b0 R11: 0000000000000001 R12: ffffffffc0ce3731
kernel: R13: ffff978950c00500 R14: ffff97894341f0c0 R15: ffff978951112eb0
kernel: FS: 0000000000000000(0000) GS:ffff97987fc00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007f807535eae8 CR3: 000000010b8e4002 CR4: 00000000003706f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel: <TASK>
kernel: __flush_work.isra.0+0xaf/0x188
kernel: ? _raw_spin_lock_irqsave+0x2c/0x37
kernel: ? lock_timer_base+0x38/0x5f
kernel: __cancel_work_timer+0xea/0x13d
kernel: ? preempt_latency_start+0x2b/0x46
kernel: rdma_addr_cancel+0x70/0x81 [ib_core]
kernel: _destroy_id+0x1a/0x246 [rdma_cm]
kernel: rpcrdma_xprt_connect+0x115/0x5ae [rpcrdma]
kernel: ? _raw_spin_unlock+0x14/0x29
kernel: ? raw_spin_rq_unlock_irq+0x5/0x10
kernel: ? finish_task_switch.isra.0+0x171/0x249
kernel: xprt_rdma_connect_worker+0x3b/0xc7 [rpcrdma]
kernel: process_one_work+0x1d8/0x2d4
kernel: worker_thread+0x18b/0x24f
kernel: ? rescuer_thread+0x280/0x280
kernel: kthread+0xf4/0xfc
kernel: ? kthread_complete_and_exit+0x1b/0x1b
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
SUNRPC's xprtiod workqueue is WQ_MEM_RECLAIM, so any workqueue that
one of its work items tries to cancel has to be WQ_MEM_RECLAIM to
prevent a priority inversion. The internal workqueues in the
RDMA/core are currently non-MEM_RECLAIM.
Jason Gunthorpe says this about the current state of RDMA/core:
> If you attempt to do a reconnection/etc from within a RECLAIM
> context it will deadlock on one of the many allocations that are
> made to support opening the connection.
>
> The general idea of reclaim is that the entire task context
> working under the reclaim is marked with an override of the gfp
> flags to make all allocations under that call chain reclaim safe.
>
> But rdmacm does allocations outside this, eg in the WQs processing
> the CM packets. So this doesn't work and we will deadlock.
>
> Fixing it is a big deal and needs more than poking WQ_MEM_RECLAIM
> here and there.
So we will change the ULP in this case to avoid the use of
WQ_MEM_RECLAIM where possible. Deadlocks that were possible before
are not fixed, but at least we no longer have a false sense of
confidence that the stack won't allocate memory during memory
reclaim.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This can be defined as simply an NFS4_INODE_EVENT() since we don't have
the name of a specific xattr to list. This roughly matches readdir,
which also uses an NFS4_INODE_EVENT() tracepoint.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
