summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-27ARM: Fix section build warnings for AMBA driversRussell King
Found in the Versatile build: WARNING: drivers/built-in.o(.data+0x14c): Section mismatch in reference from the variable pl061_gpio_driver to the (unknown reference) .init.data:(unknown) The variable pl061_gpio_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x40f8): Section mismatch in reference from the variable pl011_driver to the (unknown reference) .init.data:(unknown) The variable pl011_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x5ab4): Section mismatch in reference from the variable pl031_driver to the (unknown reference) .init.data:(unknown) The variable pl031_driver references the (unknown reference) __initdata (unknown) Basically, amba_id structures must not be __initdata. Also fix: WARNING: drivers/built-in.o(.data+0x138): Section mismatch in reference from the variable pl061_gpio_driver to the function .init.text:pl061_probe() The variable pl061_gpio_driver references the function __init pl061_probe() which is an incorrectly annotated probe function. Fix it to reflect the other AMBA bus probe functions by removing the __init attributation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: call machine_shutdown() from machine_halt(), etcRussell King
x86 calls machine_shutdown() from the various machine_*() calls which take the machine down ready for halting, restarting, etc, and uses this to bring the system safely to a point where those actions can be performed. Such actions are stopping the secondary CPUs. So, change the ARM implementation of these to reflect what x86 does. This solves kexec problems on ARM SMP platforms, where the secondary CPUs were left running across the kexec call. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: SMP: Always enable clock event broadcast supportRussell King
The TWD local timers are unable to wake up the CPU when it is placed into a low power mode, eg. C3. Therefore, we need to adapt things such that the TWD code can cope with this. We do this by always providing a broadcast tick function, and marking the fact that the TWD local timer will stop in low power modes. This means that when the CPU is placed into a low power mode, the core timer code marks this fact, and allows an IPI to be given to the core. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2010-07-27ARM: Factor out common code from cpu_proc_fin()Russell King
All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as Access Flag faultKirill A. Shutemov
Statuses 3 (0b00011) and 6 (0x00110) of DFSR are Access Flags faults on ARMv6K and ARMv7. Let's patch fsr_info[] at runtime if we are on ARMv7 or later. Unfortunately, we don't have runtime check for 'K' extension, so we can't check for it. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6256/1: Check arch version and modify fsr_info[] depends on it at runtimeKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6255/1: Workaround infinity loop in handling of translation faultsKirill A. Shutemov
On ARM one Linux PGD entry contains two hardware entries (see page tables layout in pgtable.h). We normally guarantee that we always fill both L1 entries. But create_mapping() doesn't follow the rule. It can create inidividual L1 entries, so here we have to call pmd_none() check in do_translation_fault() for the entry really corresponded to address, not for the first of pair. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6269/1: Add 'code' parameter for hook_fault_code()Kirill A. Shutemov
Add one more parameter to hook_fault_code() to be able to set 'code' field of struct fsr_info. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILLKirill A. Shutemov
POSIX specify to use signal SIGBUS with code BUS_ADRALN for invalid address alignment. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6251/1: Make SPARSE_IRQ a hidden optioneric miao
SPARSE_IRQ doesn't need to be a visible option, only those platforms supporting that will select it. Signed-off-by: Eric Miao <eric.miao@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: DMA coherent allocator: align remapped addressesRussell King
The DMA coherent remap area is used to provide an uncached mapping of memory for coherency with DMA engines. Currently, we look for any free hole which our allocation will fit in with page alignment. However, this can lead to fragmentation of the area, and allows small allocations to cross L1 entry boundaries. This is undesirable as we want to move towards allocating sections of memory. Align allocations according to the size, limiting the alignment between the page and section sizes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: use generic ioremap_page_range()Russell King
We don't need our own implementation of this, use the generic library implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivativeLinus Walleij
Implementation of the ST-Ericsson baudrate extension in the PL011 block. In this modified variant it is possible to change the sampling factor from 16 to 8, and thanks to this we can get higher baudrates while still using the same peripheral clock. Also replace the simple division to determine the baud divisor with DIV_ROUND_CLOSEST() rather than a simple integer division. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivativeLinus Walleij
In the ST-Ericsson version of the PL011 the TX and RX have different control registers. Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6213/1: atomic64_test: add ARM as supported architectureWill Deacon
ARM has support for the atomic64_dec_if_positive operation so ensure that it is tested by the atomic64_test routine. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27Merge branch 'origin' into miscRussell King
2010-07-27ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Versatile: fix section mismatchRussell King
WARNING: vmlinux.o(.text+0xbf38): Section mismatch in reference from the function pci_versatile_scan_bus() to the function .devinit.text:pci_scan_bus_parented() The function pci_versatile_scan_bus() references the function __devinit pci_scan_bus_parented(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Remove unnecessary call to find_limits()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: convert pfn_valid to use LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: Convert arm_memory_present() to use LMB memory informationRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Convert platform reservations to use LMB rather than bootmemRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: initial LMB trialRussell King
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: early_pte_alloc()Russell King
Provide a common function for allocating early PTE tables. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6267/1: mop500: add AB8500 interrupt supportRabin Vincent
Add the platform data to enable AB8500 interrupt support. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Do not try to disable hpet if it hasn't been initialized before x86, i8259: Only register sysdev if we have a real 8259 PIC
2010-07-26s2io: fixing DBG_PRINT() macroBreno Leitao
Patch 9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the DBG_PRINT() macro and the if clause was wrongly changed. It means that currently all the DBG_PRINT are being printed, flooding the kernel log buffer with things like: s2io: eth6: Next block at: c0000000b9c90000 s2io: eth6: In Neterion Tx routine Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
2010-07-26Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Set io_map_base for several PCI bridges lacking it MIPS: Alchemy: Define eth platform devices in the correct order MIPS: BCM63xx: Prevent second enet registration on BCM6338 MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. MIPS: N32: Define getdents64. MIPS: MTX-1: Fix PCI on the MeshCube and related boards MIPS: Make init_vdso a subsys_initcall. MIPS: "Fix" useless 'init_vdso successfully' message. MIPS: PowerTV: Move register setup to before reading registers. SOUND: Au1000: Fix section mismatch VIDEO: Au1100fb: Fix section mismatch VIDEO: PMAGB-B: Fix section mismatch VIDEO: PMAG-BA: Fix section mismatch NET: declance: Fix section mismatches VIDEO. gbefb: Fix section mismatches.
2010-07-26drm/i915: make sure we shut off the panel in eDP configsJesse Barnes
Fix error from the last pull request. Making sure we shut the panel off is more correct and saves power. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26xfs simplify and speed up direct I/O completionsChristoph Hellwig
Our current handling of direct I/O completions is rather suboptimal, because we defer it to a workqueue more often than needed, and we perform a much to aggressive flush of the workqueue in case unwritten extent conversions happen. This patch changes the direct I/O reads to not even use a completion handler, as we don't bother to use it at all, and to perform the unwritten extent conversions in caller context for synchronous direct I/O. For a small I/O size direct I/O workload on a consumer grade SSD, such as the untar of a kernel tree inside qemu this patch gives speedups of about 5%. Getting us much closer to the speed of a native block device, or a fully allocated XFS file. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26xfs: move aio completion after unwritten extent conversionChristoph Hellwig
If we write into an unwritten extent using AIO we need to complete the AIO request after the extent conversion has finished. Without that a read could race to see see the extent still unwritten and return zeros. For synchronous I/O we already take care of that by flushing the xfsconvertd workqueue (which might be a bit of overkill). To do that add iocb and result fields to struct xfs_ioend, so that we can call aio_complete from xfs_end_io after the extent conversion has happened. Note that we need a new result field as io_error is used for positive errno values, while the AIO code can return negative error values and positive transfer sizes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26direct-io: move aio_complete into ->end_ioChristoph Hellwig
Filesystems with unwritten extent support must not complete an AIO request until the transaction to convert the extent has been commited. That means the aio_complete calls needs to be moved into the ->end_io callback so that the filesystem can control when to call it exactly. This makes a bit of a mess out of dio_complete and the ->end_io callback prototype even more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26xfs: fix big endian buildDave Chinner
Commit 0fd7275cc42ab734eaa1a2c747e65479bd1e42af ("xfs: fix gcc 4.6 set but not read and unused statement warnings") failed to convert some code inside XFS_NATIVE_HOST (big endian host code only) and hence fails to build on such machines. Fix it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: allow creating symlinks from untagged to tagged directories sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories. sysfs: Don't allow the creation of symlinks we can't remove
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: tusb6010: fix compile error with n8x0_defconfig USB: FTDI: Add support for the RT System VX-7 radio programming cable USB: add quirk for Broadcom BT dongle USB: usb-storage: fix initializations of urb fields USB: xhci: Set Mult field in endpoint context correctly. USB: sisusbvga: Fix for USB 3.0 USB: adds Artisman USB dongle to list of quirky devices USB: xhci: Set EP0 dequeue ptr after reset of configured device. USB: Fix USB3.0 Port Speed Downgrade after port reset USB: xHCI: Fix another bug in link TRB activation change. USB: option: Add support for AMOI Skypephone S2 USB: New PIDs for Qualcomm gobi 2000 (qcserial) USB: ftdi_sio: support for Signalyzer tools based on FTDI chips USB: s3c2410_udc: be aware of connected gadget driver USB: Expose vendor-specific ACM channel on Nokia 5230 USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c USB: option: add support for 1da5:4518
2010-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: fix rs485 for atmel_serial on avr32
2010-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: add pipe A force quirks to i915 driver drm/i915: Fix panel fitting regression since 734b4157 drm/i915: fix deadlock in fb teardown drm/i915: don't free non-existent compressed llb on ILK+ agp/intel: Use the correct mask to detect i830 aperture size. drm/i915: disable FBC when more than one pipe is active drm/i915: Use the correct scanout alignment for fbcon. drm/i915: make sure eDP panel is turned on drm/i915: add PANEL_UNLOCK_REGS definition drm/i915: Make G4X-style PLL search more permissive drm/i915: Clear any existing dither mode prior to enabling spatial dithering drm/i915: handle shared framebuffers when flipping drm/i915: Explosion following OOM in do_execbuffer. gpu/drm/i915: Add a blacklist to omit modeset on LID open
2010-07-26[CPUFREQ] powernow-k8: Limit Pstate transition latency checkBorislav Petkov
The Pstate transition latency check was added for broken F10h BIOSen which wrongly contain a value of 0 for transition and bus master latency. Fam11h and later, however, (will) have similar transition latency so extend that behavior for them too. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26[CPUFREQ] Fix PCC driver error pathMatthew Garrett
The PCC cpufreq driver unmaps the mailbox address range if any CPUs fail to initialise, but doesn't do anything to remove the registered CPUs from the cpufreq core resulting in failures further down the line. We're better off simply returning a failure - the cpufreq core will unregister us cleanly if we end up with no successfully registered CPUs. Tidy up the failure path and also add a sanity check to ensure that the firmware gives us a realistic frequency - the core deals badly with that being set to 0. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26[CPUFREQ] fix double freeing in error path of pcc-cpufreqDaniel J Blueman
Prevent double freeing on error path. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26[CPUFREQ] pcc driver should check for pcch method before calling _OSCMatthew Garrett
The pcc specification documents an _OSC method that's incompatible with the one defined as part of the ACPI spec. This shouldn't be a problem as both are supposed to be guarded with a UUID. Unfortunately approximately nobody (including HP, who wrote this spec) properly check the UUID on entry to the _OSC call. Right now this could result in surprising behaviour if the pcc driver performs an _OSC call on a machine that doesn't implement the pcc specification. Check whether the PCCH method exists first in order to reduce this probability. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26[CPUFREQ] fix memory leak in cpufreq_add_devXiaotian Feng
We didn't free policy->related_cpus in error path err_unlock_policy. This is catched by following kmemleak report: unreferenced object 0xffff88022a0b96d0 (size 512): comm "modprobe", pid 886, jiffies 4294689177 (age 780.694s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8111ebe5>] create_object+0x186/0x281 [<ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7 [<ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142 [<ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7 [<ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13 [<ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11 [<ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547 [<ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d [<ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8 [<ffffffffa032e040>] 0xffffffffa032e040 [<ffffffff810021ba>] do_one_initcall+0x5e/0x15c [<ffffffff81087f94>] sys_init_module+0xa6/0x1e6 [<ffffffff81009bc2>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26[CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call ↵Andrej Gelenberg
(second call site)" 395913d0b1db37092ea3d9d69b832183b1dd84c5 ("[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)") is not needed, because there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative anymore. Lock should not be released until the work done. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594 Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-07-26sysfs: allow creating symlinks from untagged to tagged directoriesEric W. Biederman
Supporting symlinks from untagged to tagged directories is reasonable, and needed to support CONFIG_SYSFS_DEPRECATED. So don't fail a prior allowing that case to work. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories.Eric W. Biederman
This happens for network devices when SYSFS_DEPRECATED is enabled. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26sysfs: Don't allow the creation of symlinks we can't removeEric W. Biederman
Recently my tagged sysfs support revealed a flaw in the device core that a few rare drivers are running into such that we don't always put network devices in a class subdirectory named net/. Since we are not creating the class directory the network devices wind up in a non-tagged directory, but the symlinks to the network devices from /sys/class/net are in a tagged directory. All of which works until we go to remove or rename the symlink. When we remove or rename a symlink we look in the namespace of the target of the symlink. Since the target of the symlink is in a non-tagged sysfs directory we don't have a namespace to look in, and we fail to remove the symlink. Detect this problem up front and simply don't create symlinks we won't be able to remove later. This prevents symlink leakage and fails in a much clearer and more understandable way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26USB: musb: tusb6010: fix compile error with n8x0_defconfigFelipe Balbi
Drop the unnecessary empty stubs in tusb6010.c and avoid a compile error when building kernel for n8x0. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 14:58:43 +0000