| Age | Commit message (Collapse) | Author |
|---|
|
RT Systems has put out bunch of ham radio cables based on the FT232RL
chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7
radios.
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This device needs to be reset when resuming
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Commit 0ede76fcec5415ef82a423a95120286895822e2d, "USB: remove uses of
URB_NO_SETUP_DMA_MAP" introduced a regression by inadvertantly removing
initialization of the transfer flags. This caused initialization
failures in the ums-karma driver. Fix the regression by zeroing it.
While at it, as Alan Stern points out, the initializers for
actual_length and status are handled by the core and error_count
only matters for isochronous urbs, so they don't need to be set here.
Remove them.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The bmAttributes field of the SuperSpeed Endpoint Companion Descriptor has
different meanings, depending on the endpoint type. If the endpoint is
isochronous, the bmAttributes field is the maximum number of packets
within a service interval that this endpoint supports. If the endpoint is
bulk, it's the number of stream IDs this endpoint supports.
Only set the Mult field of the xHCI endpoint context using the
bmAttributes field if the endpoint is isochronous, and the device is a
SuperSpeed device.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Super speed is also fast enough to let sisusbvga operate.
Therefor expand the checks.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
When an attempt is made to read the interface strings of the Artisman
Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written
to the dmesg log (uhci_result_common: failed with status 440000) and the
dongle resets itself, resulting in a disconnect/reconnect loop.
Adding the dongle to the list of devices in quirks.c, with the same
quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D
joystick, stops the device from resetting and allows it to be used with
no problems.
Signed-off-by: Paul Mortier <mortier@btinternet.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
When a configured device is reset, the control endpoint's ring is reused.
If control transfers to the device were issued before the device is reset,
the dequeue pointer will be somewhere in the middle of the ring. If the
device is then issued an address with the set address command, the xHCI
driver must provide a valid input context for control endpoint zero.
The original code would give the hardware the original input context,
which had a dequeue pointer set to the top of the ring. This would cause
the host to re-execute any control transfers until it reached the ring's
enqueue pointer. When issuing a set address command for a device that has
just been configured and then reset, use the control endpoint's enqueue
pointer as the hardware's dequeue pointer.
Assumption: All control transfers will be completed or cancelled before
the set address command is issued to the device. If there are any
outstanding control transfers, this code will not work.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Without this fix, a USB 3.0 port is downgraded to full speed after a port
reset of a configured device. The USB 3.0 terminations will be disabled
permanently, and USB 3.0 devices will always enumerate as full speed
devices, until the host controller is unplugged (if it is an ExpressCard)
or the computer is rebooted.
Fajun Chen traced this traced the speed downgrade issue to the port reset
and the interpretation of port status in USB hub driver code. The hub
code was not testing for the port being a SuperSpeed port, and it fell
through to the else case of Full Speed.
The following patch adds SuperSpeed mapping from the port status, and
fixes the speed downgrade issue.
Reported-by: Fajun Chen <fajun.chen@seagate.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Commit 6c12db90f19727c76990e7f4801c67a148b30111 also seems to have
introduced a bug that is triggered when the command ring is about to wrap.
The inc_enq() function will not have moved the enqueue pointer past the
link TRB. It is supposed to be moved past the link TRB in prepare_ring(),
which should be called before a TD is enqueued. However, the
queue_command() function never calls the prepare_ring() function because
prepare_ring() is only supposed to be used for endpoint rings. That means
the enqueue pointer will not be moved past the link TRB, and will get
overwritten.
The fix is to make queue_command() call prepare_ring() with a fake
endpoint status (set to running). Then the enqueue pointer will get moved
past the link TRB.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
usbserial: Add AMOI Skypephone S2 support.
This patch adds support for the AMOI Skypephone S2 to the usbserial module.
Tested-by: Dennis Jansen <Dennis.Jansen@web.de>
Signed-off-by: Dennis Jansen <Dennis.Jansen@web.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem
Signed-off-by: Andrew Bird <ajb@spheresytems.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
ftdi_sio: support for Signalyzer tools based on FTDI chips
This patch adds support for the Xverve Signalyzers.
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
To escape from data abort in interrupt handler, it is required to
check for a connected gadget before delivering control requests.
The change fixes the following panic, which occurs with no loaded
gadget driver and input USB_REQ_GET_DESCRIPTOR request:
Kernel panic - not syncing: Fatal exception in interrupt
[<c0025874>] (unwind_backtrace+0x0/0xd8) from [<c0253f14>] (panic+0x40/0x110)
[<c0253f14>] (panic+0x40/0x110) from [<c002470c>] (die+0x154/0x180)
[<c002470c>] (die+0x154/0x180) from [<c0026448>] (__do_kernel_fault+0x64/0x74)
[<c0026448>] (__do_kernel_fault+0x64/0x74) from [<c0026610>] (do_page_fault+0x1b8/0x1cc)
[<c0026610>] (do_page_fault+0x1b8/0x1cc) from [<c00202d4>] (do_DataAbort+0x34/0x94)
[<c00202d4>] (do_DataAbort+0x34/0x94) from [<c0020a60>] (__dabt_svc+0x40/0x60)
Exception stack(0xc0327ea8 to 0xc0327ef0)
7ea0: bf0026b0 c0327ef0 c0327ee4 00000000 bf002590 00000093
7ec0: 00000001 bf0026b0 bf002990 00000000 00000008 0000143d 00003f00 c0327ef0
7ee0: bf001364 bf001360 20000093 ffffffff
[<c0020a60>] (__dabt_svc+0x40/0x60) from [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc])
[<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) from [<c0058aa0>] (handle_IRQ_event+0x3c/0x104)
[<c0058aa0>] (handle_IRQ_event+0x3c/0x104) from [<c005a428>] (handle_edge_irq+0x12c/0x164)
[<c005a428>] (handle_edge_irq+0x12c/0x164) from [<c0020068>] (asm_do_IRQ+0x68/0x88)
[<c0020068>] (asm_do_IRQ+0x68/0x88) from [<c0020aa4>] (__irq_svc+0x24/0xa0)
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Nokia S60 phones expose two ACM channels. The first is
a modem, the second is 'vendor-specific' but is treated
as a serial device at the S60 end, so we want to expose
it on Linux too.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c
Allows use of 3G radio only
Signed-off-by: August Huber <gus@pbx.org>
Cc: Elina Pasheva <epasheva@sierrawireless.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Ported over from the old UMS list. Unfortunately they're still
necessary especially on older laptop platforms.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=22126.
Tested-by: Xavier <shiningxc@gmail.com>
Tested-by: Diego Escalante Urrelo <diegoe@gnome.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
The crtc mode fixup is run after the encoders adjust the mode to fit on
their output, so don't reset the mode!
Fixes:
Bug 29057 - display corruption under 800x600 on netbook
(1024x600) with 'Full Aspect' scaling
https://bugs.freedesktop.org/show_bug.cgi?id=29057
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Xun Fang <xunx.fang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
This patch fixes a build failure [1-4] in the atmel_serial code introduced by
patch the patch ARM: 6092/1: atmel_serial: support for RS485
communications (e8faff7330a3501eafc9bfe5f4f15af444be29f5)
The build failure was caused by missing struct field and missing defines
for the avr32 board - the patch fixes this.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2575242/ - first failure in linux-next, may 11th
[2] http://kisskb.ellerman.id.au/kisskb/buildresult/2816418/ - still exists as of today
[3] http://kisskb.ellerman.id.au/kisskb/buildresult/2617511/ - first failure in Linus' tree - May 20th - did really no one notice this?!
[4] http://kisskb.ellerman.id.au/kisskb/buildresult/2813956/ - still exists in Linus' tree as of today
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
For edma, we should use DMA_BIDIRECTIONAL, or else use
DMA_FROM_DEVICE.
This is found to address "BUG at arch/x86/mm/physaddr.c:5"
as described here:
http://lkml.org/lkml/2010/7/14/21
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
At module unload time we'll tear down the fbdev state. We do so under
the struct mutex, so we shouldn't try to use the unlocked variant of
the GEM object unreference function or we may deadlock.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
We should only free the compressed llb if we allocated it in the first
place otherwise we'll panic at unload time.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
BugLink: https://bugs.launchpad.net/bugs/597075
commit f1befe71fa7a79ab733011b045639d8d809924ad introduced a
regression when detecting aperture size of some i915 adapters, e.g.,
those on the Intel Q35 chipset.
The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733
The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294
According to the specification found at
http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config
space register I830_GMCH_CTRL is a mirror of GMCH Graphics
Control. The correct macro for isolating the aperture size bits is
therefore I830_GMCH_GMS_MASK along with the attendant changes to the
case statement.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Kees Cook <kees.cook@canonical.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
We're really supposed to do this to avoid trouble with underflows when
multiple planes are active.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: fangxun <xunx.fang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
This fixes a potential modesetting error during boot with plymouth on
Broadwater and Crestline introduced with 9df47c. The framebuffer was
hard-coding an alignment of 64K, but the modesetting code required the
documented alignment of 128K. The result was that we would attempt to
unbind the pinned fbcon buffer, triggering an ERROR and ultimately
failing the mode change.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
When enabling the eDP port, we need to make sure the panel is turned on
after training the link. If we don't, it likely won't come back after
suspend or may not come up at all.
For unknown reasons, unlocking the panel regs before initiating a power
on sequence is necessary. There are known bugs in the PCH panel
sequencing logic, apparently this is one possible workaround.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: "Paulo J. S. Silva" <pjssilva@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
In some cases, unlocking the panel regs is safe and can help us avoid a
flickery, full mode set sequence. So define the unlock key and use it.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC
reference clock.
More generally, the 0.488% tolerance used before is just too tight to
reliably find a PLL setting. I extracted the search algorithm and
modified it to find the dot clocks with maximum error over the valid
range for the given output type:
http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c
This gave:
Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571)
Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524)
Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488)
Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529)
Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488)
Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448)
Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478)
Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449)
Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_truncate_file is only used for truncating quota files. Move it to
xfs_qm_syscalls.c so it can be marked static and take advatange of the
fact by removing the unused page cache validation and taking the iget
into the helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The b_strat callback is used by xfs_buf_iostrategy to perform additional
checks before submitting a buffer. It is used in xfs_bwrite and when
writing out delayed buffers. In xfs_bwrite it we can de-virtualize the
call easily as b_strat is set a few lines above the call to
xfs_buf_iostrategy. For the delayed buffers the rationale is a bit
more complicated:
- there are three callers of xfs_buf_delwri_queue, which places buffers
on the delwri list:
(1) xfs_bdwrite - this sets up b_strat, so it's fine
(2) xfs_buf_iorequest. None of the callers can have XBF_DELWRI set:
- xlog_bdstrat is only used for log buffers, which are never delwri
- _xfs_buf_read explicitly clears the delwri flag
- xfs_buf_iodone_work retries log buffers only
- xfsbdstrat - only used for reads, superblock writes without the
delwri flag, log I/O and file zeroing with explicitly allocated
buffers.
- xfs_buf_iostrategy - only calls xfs_buf_iorequest if b_strat is
not set
(3) xfs_buf_unlock
- only puts the buffer on the delwri list if the DELWRI flag is
already set. The DELWRI flag is only ever set in xfs_bwrite,
xfs_buf_iodone_callbacks, or xfs_trans_log_buf. For
xfs_buf_iodone_callbacks and xfs_trans_log_buf we require
an initialized buf item, which means b_strat was set to
xfs_bdstrat_cb in xfs_buf_item_init.
Conclusion: we can just get rid of the callback and replace it with
explicit calls to xfs_bdstrat_cb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Since Linux 2.6.33 the kernel has support for real O_SYNC, which made
the osyncisosync option a no-op. Warn the users about this and remove
the mount flag for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Move xfs_filestream_peek_ag, xxfs_filestream_get_ag and xfs_filestream_put_ag
from xfs_filestream.h to xfs_filestream.c where it's only callers are, and
remove the inline marker while we're at it to let the compiler decide on the
inlining. Also don't return a value from xfs_filestream_put_ag because
we don't need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
[hch: dropped a few hunks that need structural changes instead]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When CONFIG_XFS_POSIX_ACL is not set "xfs_check_acl" is #defined
to NULL - which breaks the code attempting to add a tracepoint
on this function.
Only define the tracepoint when the function exists.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
map_len is unsigned. Checking map_len <= 0 is buggy when it should be
below zero. So, check exact expression instead of map_len.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Avoid a lockdep warning by preventing page cache allocation from
recursing back into the filesystem during memory reclaim.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Calling into memory reclaim with a locked inode buffer can deadlock
if memory reclaim tries to lock the inode buffer during inode
teardown. Convert the relevant memory allocations to use KM_NOFS to
avoid this deadlock condition.
Reported-by: Peter Watkins <treestem@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_trans_add_item() is called with ip->i_ilock held, which means it
is unsafe for memory reclaim to recurse back into the filesystem
(ilock is required in writeback). Hence the allocation needs to be
KM_NOFS to avoid recursion.
Lockdep report indicating memory allocation being called with the
ip->i_ilock held is as follows:
[ 1749.866796] =================================
[ 1749.867788] [ INFO: inconsistent lock state ]
[ 1749.868327] 2.6.35-rc3-dgc+ #25
[ 1749.868741] ---------------------------------
[ 1749.868741] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
[ 1749.868741] dd/2835 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 1749.868741] (&(&ip->i_lock)->mr_lock){++++?.}, at: [<ffffffff813170fb>] xfs_ilock+0x10b/0x190
[ 1749.868741] {IN-RECLAIM_FS-W} state was registered at:
[ 1749.868741] [<ffffffff810b3a97>] __lock_acquire+0x437/0x1450
[ 1749.868741] [<ffffffff810b4b56>] lock_acquire+0xa6/0x160
[ 1749.868741] [<ffffffff810a20b5>] down_write_nested+0x65/0xb0
[ 1749.868741] [<ffffffff813170fb>] xfs_ilock+0x10b/0x190
[ 1749.868741] [<ffffffff8134e819>] xfs_reclaim_inode+0x99/0x310
[ 1749.868741] [<ffffffff8134f56b>] xfs_inode_ag_walk+0x8b/0x150
[ 1749.868741] [<ffffffff8134f6bb>] xfs_inode_ag_iterator+0x8b/0xf0
[ 1749.868741] [<ffffffff8134f7a8>] xfs_reclaim_inode_shrink+0x88/0x90
[ 1749.868741] [<ffffffff81119d07>] shrink_slab+0x137/0x1a0
[ 1749.868741] [<ffffffff8111bbe1>] balance_pgdat+0x421/0x6a0
[ 1749.868741] [<ffffffff8111bf7d>] kswapd+0x11d/0x320
[ 1749.868741] [<ffffffff8109ce56>] kthread+0x96/0xa0
[ 1749.868741] [<ffffffff81035de4>] kernel_thread_helper+0x4/0x10
[ 1749.868741] irq event stamp: 4234335
[ 1749.868741] hardirqs last enabled at (4234335): [<ffffffff81147d25>] kmem_cache_free+0x115/0x220
[ 1749.868741] hardirqs last disabled at (4234334): [<ffffffff81147c4d>] kmem_cache_free+0x3d/0x220
[ 1749.868741] softirqs last enabled at (4233112): [<ffffffff81084dd2>] __do_softirq+0x142/0x260
[ 1749.868741] softirqs last disabled at (4233095): [<ffffffff81035edc>] call_softirq+0x1c/0x50
[ 1749.868741]
[ 1749.868741] other info that might help us debug this:
[ 1749.868741] 2 locks held by dd/2835:
[ 1749.868741] #0: (&(&ip->i_iolock)->mr_lock#2){+.+.+.}, at: [<ffffffff81316edd>] xfs_ilock_nowait+0xed/0x200
[ 1749.868741] #1: (&(&ip->i_lock)->mr_lock){++++?.}, at: [<ffffffff813170fb>] xfs_ilock+0x10b/0x190
[ 1749.868741]
[ 1749.868741] stack backtrace:
[ 1749.868741] Pid: 2835, comm: dd Not tainted 2.6.35-rc3-dgc+ #25
[ 1749.868741] Call Trace:
[ 1749.868741] [<ffffffff810b1faa>] print_usage_bug+0x18a/0x190
[ 1749.868741] [<ffffffff8104264f>] ? save_stack_trace+0x2f/0x50
[ 1749.868741] [<ffffffff810b2400>] ? check_usage_backwards+0x0/0xf0
[ 1749.868741] [<ffffffff810b2f11>] mark_lock+0x331/0x400
[ 1749.868741] [<ffffffff810b3047>] mark_held_locks+0x67/0x90
[ 1749.868741] [<ffffffff810b3111>] lockdep_trace_alloc+0xa1/0xe0
[ 1749.868741] [<ffffffff81147419>] kmem_cache_alloc+0x39/0x1e0
[ 1749.868741] [<ffffffff8133f954>] kmem_zone_alloc+0x94/0xe0
[ 1749.868741] [<ffffffff8133f9be>] kmem_zone_zalloc+0x1e/0x50
[ 1749.868741] [<ffffffff81335f02>] xfs_trans_add_item+0x72/0xb0
[ 1749.868741] [<ffffffff81339e41>] xfs_trans_ijoin+0xa1/0xd0
[ 1749.868741] [<ffffffff81319f82>] xfs_itruncate_finish+0x312/0x5d0
[ 1749.868741] [<ffffffff8133cb87>] xfs_free_eofblocks+0x227/0x280
[ 1749.868741] [<ffffffff8133cd18>] xfs_release+0x138/0x190
[ 1749.868741] [<ffffffff813464c5>] xfs_file_release+0x15/0x20
[ 1749.868741] [<ffffffff81150ebf>] fput+0x13f/0x260
[ 1749.868741] [<ffffffff8114d8c2>] filp_close+0x52/0x80
[ 1749.868741] [<ffffffff8114d9a9>] sys_close+0xb9/0x120
[ 1749.868741] [<ffffffff81034ff2>] system_call_fastpath+0x16/0x1b
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_ireclaim has to get and put te pag structure because it is only
called with the inode to reclaim. The one caller of this function
already has a reference on the pag and a pointer to is, so move the
radix tree delete to the caller and remove xfs_ireclaim completely.
This avoids a xfs_perag_get/put on every inode being reclaimed.
The overhead was noticed in a bug report at:
https://bugzilla.kernel.org/show_bug.cgi?id=16348
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_buf_read() fails to detect dispatch errors before attempting to
wait on sychronous IO. If there was an error, it will get stuck
forever, waiting for an I/O that was never started. Make sure the
error is detected correctly.
Further, such a failure can leave locked pages in the page cache
which will cause a later operation to hang on the page. Ensure that
we correctly process pages in the buffers when we get a dispatch
error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
I missed Dave Chinner's second revision of this change, and pushed
his first version out to the repository instead.
commit a476c59ebb279d738718edc0e3fb76aab3687114
Author: Dave Chinner <dchinner@redhat.com>
This commit compensates for that by moving a block of code up a bit
further, with a result that matches the the effect of Dave's second
version.
Dave's first version was:
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Dave's second version was:
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
|
|
The open_exec file operation is only added by the external dmapi
patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
These days we always have buffers thanks to ->page_mkwrite. And we
already have an assert a few lines above tripping in case that was
not true due to a bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We only need disable I/O from direct or memcg reclaim.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We do need a barrier for the first buffer of a split log write.
Otherwise we might incorrectly stamp the tail LSN into transactions
in the first part of the split write, or not flush data I/O before
updating the inode size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently we don't remove the XFS mount from the shrinker list until
late in the unmount path. By this time, we have already torn down
the internals of the filesystem (e.g. the per-ag structures), and
hence if the shrinker is executed between the teardown and the
unregistering, the shrinker will get NULL per-ag structure pointers
and panic trying to dereference them.
Fix this by removing the xfs mount from the shrinker list before
tearing down it's internal structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Replace the xfs_itrace_entry catchall with specific trace points. For
most simple callers we now use the simple inode class, which used to
be the iget class, but add more details tracing for namespace events,
which now includes the name of the directory entries manipulated.
Remove the xfs_inactive trace point, which is a duplicate of the clear_inode
one, and the xfs_change_file_space trace point, which is immediately
followed by the more specific alloc/free space trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
xfs_iput is just a small wrapper for xfs_iunlock + IRELE. Having this
out of line wrapper means the trace events in those two can't track
their caller properly. So just remove the wrapper and opencode the
unlock + rele in the few callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
We never get an i_mode of 0 or a locked VFS inode until we pass in the
XFS_IGET_CREATE flag to xfs_iget, which makes xfs_iput_new equivalent to
xfs_iput for the only caller. In addition to that xfs_nfs_get_inode
does not even need to lock the inode given that the generation never changes
for a life inode, so just pass a 0 lock_flags to xfs_iget and release
the inode using IRELE in the error path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
