| Age | Commit message (Collapse) | Author |
|---|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:
arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'
This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.
Fixes: 55b447744389 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ")
Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fix for v6.14-rc6
A single fix for an incorrect define in the jh7110 pinctrl header.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Fix a typo in StarFive JH7110 pin function definitions
Link: https://lore.kernel.org/r/20250305-sip-unable-d56ef7dbf86b@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.14, please pull the following:
- Phil fixes the Raspberry Pi 5 PL011 UART primecell ID to indicate it
is r1p5 and thus has a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
Link: https://lore.kernel.org/r/20250225194041.1063762-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14:
- Stefan fixes the xHCI power domain on the Raspberry Pi 4
- Phil fixes the Raspberry Pi 4 PL011 UART primecell ID to indicate they are
r1p5 and thus have a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: Fix xHCI power-domain
Link: https://lore.kernel.org/r/20250225194041.1063762-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add btrfs_free_chunk_map() to free the memory allocated
by btrfs_alloc_chunk_map() if btrfs_add_chunk_map() fails.
Fixes: 7dc66abb5a47 ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The range of ADC volume is -1 -> 3 (-6 to 18dB) so the number of levels
should actually be 4.
Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250306133254.1861046-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The call to flush_work before tearing down a table from the netlink
notifier was supposed to make sure that all earlier updates (e.g. rule
add) that might reference that table have been processed.
Unfortunately, flush_work() waits for the last queued instance.
This could be an instance that is different from the one that we must
wait for.
This is because transactions are protected with a pernet mutex, but the
work item is global, so holding the transaction mutex doesn't prevent
another netns from queueing more work.
Make the work item pernet so that flush_work() will wait for all
transactions queued from this netns.
A welcome side effect is that we no longer need to wait for transaction
objects from foreign netns.
The gc work queue is still global. This seems to be ok because nft_set
structures are reference counted and each container structure owns a
reference on the net namespace.
The destroy_list is still protected by a global spinlock rather than
pernet one but the hold time is very short anyway.
v2: call cancel_work_sync before reaping the remaining tables (Pablo).
Fixes: 9f6958ba2e90 ("netfilter: nf_tables: unconditionally flush pending work before notifier")
Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
usable in softirqs
Background:
===========
Currently kernel-mode FPU is not always usable in softirq context on
x86, since softirqs can nest inside a kernel-mode FPU section in task
context, and nested use of kernel-mode FPU is not supported.
Therefore, x86 SIMD-optimized code that can be called in softirq context
has to sometimes fall back to non-SIMD code. There are two options for
the fallback, both of which are pretty terrible:
(a) Use a scalar fallback. This can be 10-100x slower than vectorized
code because it cannot use specialized instructions like AES, SHA,
or carryless multiplication.
(b) Execute the request asynchronously using a kworker. In other
words, use the "crypto SIMD helper" in crypto/simd.c.
Currently most of the x86 en/decryption code (skcipher and aead
algorithms) uses option (b), since this avoids the slow scalar fallback
and it is easier to wire up. But option (b) is still really bad for its
own reasons:
- Punting the request to a kworker is bad for performance too.
- It forces the algorithm to be marked as asynchronous
(CRYPTO_ALG_ASYNC), preventing it from being used by crypto API
users who request a synchronous algorithm. That's another huge
performance problem, which is especially unfortunate for users who
don't even do en/decryption in softirq context.
- It makes all en/decryption operations take a detour through
crypto/simd.c. That involves additional checks and an additional
indirect call, which slow down en/decryption for *everyone*.
Fortunately, the skcipher and aead APIs are only usable in task and
softirq context in the first place. Thus, if kernel-mode FPU were to be
reliably usable in softirq context, no fallback would be needed.
Indeed, other architectures such as arm, arm64, and riscv have already
done this.
Changes implemented:
====================
Therefore, this patch updates x86 accordingly to reliably support
kernel-mode FPU in softirqs.
This is done by just disabling softirq processing in kernel-mode FPU
sections (when hardirqs are not already disabled), as that prevents the
nesting that was problematic.
This will delay some softirqs slightly, but only ones that would have
otherwise been nested inside a task context kernel-mode FPU section.
Any such softirqs would have taken the slow fallback path before if they
tried to do any en/decryption. Now these softirqs will just run at the
end of the task context kernel-mode FPU section (since local_bh_enable()
runs pending softirqs) and will no longer take the slow fallback path.
Alternatives considered:
========================
- Make kernel-mode FPU sections fully preemptible. This would require
growing task_struct by another struct fpstate which is more than 2K.
- Make softirqs save/restore the kernel-mode FPU state to a per-CPU
struct fpstate when nested use is detected. Somewhat interesting, but
seems unnecessary when a simpler solution exists.
Performance results:
====================
I did some benchmarks with AES-XTS encryption of 16-byte messages (which is
unrealistically small, but this makes it easier to see the overhead of
kernel-mode FPU...). The baseline was 384 MB/s. Removing the use of
crypto/simd.c, which this work makes possible, increases it to 487 MB/s,
a +27% improvement in throughput.
CPU was AMD Ryzen 9 9950X (Zen 5). No debugging options were enabled.
[ mingo: Prettified the changelog and added performance results. ]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250304204954.3901-1-ebiggers@kernel.org
|
|
Pull NVMe fixe from Keith:
"nvme fixes for Linux 6.14
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)"
* tag 'nvme-6.14-2025-03-05' of git://git.infradead.org/nvme:
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers pacman package fails
to build when "O=" is set. The build system complains:
/mnt/chroot/linux/scripts/Makefile.build:41: mnt/chroots/linux-mainline/pacman/linux-upstream/pkg/linux-upstream-headers/usr//lib/modules/6.14.0-rc3-00350-g771dba31fffc/build/scripts/Makefile: No such file or directory
This is because the "srcroot" variable is set to "." and the
"build" variable is set to the absolute path. This makes the
"src" variables point to wrong directory.
Change the "build" variable to a relative path to "." to
fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since pci_get_domain_bus_and_slot() can return NULL, add NULL check for
pci_gfx_root in the mid_get_vbt_data().
This change is similar to the checks implemented in mid_get_fuse_settings()
and mid_get_pci_revID(), which were introduced by commit 0cecdd818cd7
("gma500: Final enables for Oaktrail") as "additional minor
bulletproofing".
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f910b411053f ("gma500: Add the glue to the various BIOS and firmware interfaces")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306112046.17144-1-i.abramov@mt-integration.ru
|
|
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
|
|
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the following Telit Cinterion FE990B40 compositions:
0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
[ johan: use USB_DEVICE_AND_INTERFACE_INFO() and sort by protocol ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When creating a new perf_event for the hardlockup watchdog, it should not
happen that the old perf_event is not released.
Introduce a WARN_ONCE() that should never trigger.
[ mingo: Changed the type of the warning to WARN_ONCE(). ]
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-2-lihuafei1@huawei.com
|
|
During stress-testing, we found a kmemleak report for perf_event:
unreferenced object 0xff110001410a33e0 (size 1328):
comm "kworker/4:11", pid 288, jiffies 4294916004
hex dump (first 32 bytes):
b8 be c2 3b 02 00 11 ff 22 01 00 00 00 00 ad de ...;....".......
f0 33 0a 41 01 00 11 ff f0 33 0a 41 01 00 11 ff .3.A.....3.A....
backtrace (crc 24eb7b3a):
[<00000000e211b653>] kmem_cache_alloc_node_noprof+0x269/0x2e0
[<000000009d0985fa>] perf_event_alloc+0x5f/0xcf0
[<00000000084ad4a2>] perf_event_create_kernel_counter+0x38/0x1b0
[<00000000fde96401>] hardlockup_detector_event_create+0x50/0xe0
[<0000000051183158>] watchdog_hardlockup_enable+0x17/0x70
[<00000000ac89727f>] softlockup_start_fn+0x15/0x40
...
Our stress test includes CPU online and offline cycles, and updating the
watchdog configuration.
After reading the code, I found that there may be a race between cleaning up
perf_event after updating watchdog and disabling event when the CPU goes offline:
CPU0 CPU1 CPU2
(update watchdog) (hotplug offline CPU1)
... _cpu_down(CPU1)
cpus_read_lock() // waiting for cpu lock
softlockup_start_all
smp_call_on_cpu(CPU1)
softlockup_start_fn
...
watchdog_hardlockup_enable(CPU1)
perf create E1
watchdog_ev[CPU1] = E1
cpus_read_unlock()
cpus_write_lock()
cpuhp_kick_ap_work(CPU1)
cpuhp_thread_fun
...
watchdog_hardlockup_disable(CPU1)
watchdog_ev[CPU1] = NULL
dead_event[CPU1] = E1
__lockup_detector_cleanup
for each dead_events_mask
release each dead_event
/*
* CPU1 has not been added to
* dead_events_mask, then E1
* will not be released
*/
CPU1 -> dead_events_mask
cpumask_clear(&dead_events_mask)
// dead_events_mask is cleared, E1 is leaked
In this case, the leaked perf_event E1 matches the perf_event leak
reported by kmemleak. Due to the low probability of problem recurrence
(only reported once), I added some hack delays in the code:
static void __lockup_detector_reconfigure(void)
{
...
watchdog_hardlockup_start();
cpus_read_unlock();
+ mdelay(100);
/*
* Must be called outside the cpus locked section to prevent
* recursive locking in the perf code.
...
}
void watchdog_hardlockup_disable(unsigned int cpu)
{
...
perf_event_disable(event);
this_cpu_write(watchdog_ev, NULL);
this_cpu_write(dead_event, event);
+ mdelay(100);
cpumask_set_cpu(smp_processor_id(), &dead_events_mask);
atomic_dec(&watchdog_cpus);
...
}
void hardlockup_detector_perf_cleanup(void)
{
...
perf_event_release_kernel(event);
per_cpu(dead_event, cpu) = NULL;
}
+ mdelay(100);
cpumask_clear(&dead_events_mask);
}
Then, simultaneously performing CPU on/off and switching watchdog, it is
almost certain to reproduce this leak.
The problem here is that releasing perf_event is not within the CPU
hotplug read-write lock. Commit:
941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
introduced deferred release to solve the deadlock caused by calling
get_online_cpus() when releasing perf_event. Later, commit:
efe951d3de91 ("perf/x86: Fix perf,x86,cpuhp deadlock")
removed the get_online_cpus() call on the perf_event release path to solve
another deadlock problem.
Therefore, it is now possible to move the release of perf_event back
into the CPU hotplug read-write lock, and release the event immediately
after disabling it.
Fixes: 941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-1-lihuafei1@huawei.com
|
|
The device id entries for Telit FN990B ended up matching only on the
interface protocol. While this works, the protocol is qualified by the
interface class (and subclass) which should have been included.
Switch to matching using USB_DEVICE_AND_INTERFACE_INFO() while keeping
the entries sorted also by protocol for consistency.
Link: https://lore.kernel.org/20250227110655.3647028-2-fabio.porcedda@gmail.com/
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The following build warning highlights some unused code:
arch/x86/platform/olpc/olpc_dt.c: In function ‘olpc_dt_compatible_match’:
arch/x86/platform/olpc/olpc_dt.c:222:12: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
The compiler is right, the local variable 'len' is set but never used,
so remove it.
Fixes: a7a9bacb9a32 ("x86/platform/olpc: Use a correct version when making up a battery node")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241025074203.1921344-1-zengheng4@huawei.com
|
|
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bring in the iomap changes required for xfs to support large atomic
write with CoW.
* patches from https://lore.kernel.org/r/20250303171120.2837067-1-john.g.garry@oracle.com:
iomap: Lift blocksize restriction on atomic writes
iomap: Support SW-based atomic writes
iomap: Rename IOMAP_ATOMIC -> IOMAP_ATOMIC_HW
Link: https://lore.kernel.org/r/20250303171120.2837067-1-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Filesystems like ext4 can submit writes in multiples of blocksizes.
But we still can't allow the writes to be split. Hence let's check if
the iomap_length() is same as iter->len or not.
It is the role of the FS to ensure that a single mapping may be created
for an atomic write. The FS will also continue to check size and alignment
legality.
Signed-off-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
jpg: Tweak commit message
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250303171120.2837067-7-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently atomic write support requires dedicated HW support. This imposes
a restriction on the filesystem that disk blocks need to be aligned and
contiguously mapped to FS blocks to issue atomic writes.
XFS has no method to guarantee FS block alignment for regular,
non-RT files. As such, atomic writes are currently limited to 1x FS block
there.
To deal with the scenario that we are issuing an atomic write over
misaligned or discontiguous data blocks - and raise the atomic write size
limit - support a SW-based software emulated atomic write mode. For XFS,
this SW-based atomic writes would use CoW support to issue emulated untorn
writes.
It is the responsibility of the FS to detect discontiguous atomic writes
and switch to IOMAP_DIO_ATOMIC_SW mode and retry the write. Indeed,
SW-based atomic writes could be used always when the mounted bdev does
not support HW offload, but this strategy is not initially expected to be
used.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250303171120.2837067-6-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In future xfs will support a SW-based atomic write, so rename
IOMAP_ATOMIC -> IOMAP_ATOMIC_HW to be clear which mode is being used.
Also relocate setting of IOMAP_ATOMIC_HW to the write path in
__iomap_dio_rw(), to be clear that this flag is only relevant to writes.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250303171120.2837067-3-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Bring in iomap changes that xfs relies on.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By default fair_server dl_server allocates 5% of the bandwidth to the root
domain. Due to this writing any value less than 5% fails due to -EBUSY:
$ cat /proc/sys/kernel/sched_rt_period_us
1000000
$ echo 49999 > /proc/sys/kernel/sched_rt_runtime_us
-bash: echo: write error: Device or resource busy
$ echo 50000 > /proc/sys/kernel/sched_rt_runtime_us
$
Since the sched_rt_runtime_us allows -1 as the minimum, put this
restriction in the documentation.
One should check average of runtime/period in
/sys/kernel/debug/sched/fair_server/cpuX/* for exact value.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-3-sshegde@linux.ibm.com
|
|
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
|
|
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d0f4 ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The on_freelist() doesn't have a way to handle the edgecase of having a
full freelist that doesn't end in NULL and instead has another valid
pointer in the slab as a result of a Use-After-Free or anything similar.
This case won't get caught by check_valid_pointer() and it will result in
nr incrementing to `slab->objects + 1`, corrupting the slab->inuse entry
later in the code by setting it to -1.
Add an if check to detect that case, report it and handle the freelist
and slab appropriately, as is the standard process in these situations.
Furthermore change the return type of the function from int to bool as
per coding style guidelines.
Also move the `break;` line inside the `if (object) {` to make it more
obvious that the code breaks the while loop in that branch.
Signed-off-by: Lilith Persefoni Gkini <lilithgkini@proton.me>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Matthew Wilcox (Oracle) <willy@infradead.org> says:
The start of this was the removal of orangefs_writepage(), but it quickly
spiralled into a more comprehensive cleanup. The first patch is an
actual bug fix. I haven't tagged it for backport, as I don't think we
really care about 32-bit systems any more, but feel free to add a cc to
stable if you disagree.
Patches 2 and 3 are compilation fixes for warnings which aren't enabled
by default.
Patches 4-9 are improvements which simplify orangefs or convert it
from pages to folios. There is still a little use of 'struct page'
in orangefs, but it's not in the areas that deal with the page cache.
* patches from https://lore.kernel.org/r/20250305204734.1475264-1-willy@infradead.org:
orangefs: Convert orangefs_writepages to contain an array of folios
orangefs: Simplify bvec setup in orangefs_writepages_work()
orangefs: Unify error & success paths in orangefs_writepages_work()
orangefs: Pass mapping to orangefs_writepages_work()
orangefs: Convert orangefs_writepage_locked() to take a folio
orangefs: Remove orangefs_writepage()
orangefs: make open_for_read and open_for_write boolean
orangefs: Move s_kmod_keyword_mask_map to orangefs-debugfs.c
orangefs: Do not truncate file size
Link: https://lore.kernel.org/r/20250305204734.1475264-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The pages being passed in are always folios (since they come from the
page cache). This eliminates several hidden calls to compound_head(),
and uses of legacy APIs.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-10-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This produces a bvec which is slightly different as the last page is added
in its entirety rather than only the portion which is being written back.
However we don't use this information anywhere; the iovec has its own
length parameter.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-9-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both arms of this conditional now have the same loop, so sink it out
of the conditional.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-8-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove two accesses to page->mapping by passing the mapping from
orangefs_writepages() to orangefs_writepages_callback() and then
orangefs_writepages_work(). That makes it obvious that all folios come
from the same mapping, so we can hoist the call to mapping_set_error()
outside the loop. While I'm here, switch from write_cache_pages()
to writeback_iter() which removes an indirect function call.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-7-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both callers have a folio, pass it in and use it inside
orangefs_writepage_locked(). Removes a few hidden calls to
compound_head() and accesses to page->mapping.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-6-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If we add a migrate_folio operation, we can remove orangefs_writepage
(as there is already a writepages operation). filemap_migrate_folio()
will do fine as struct orangefs_write_range does not need to be adjusted
when the folio is migrated.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-5-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
sparse currently warns:
fs/orangefs/file.c:119:32: warning: incorrect type in assignment (different base types)
fs/orangefs/file.c:119:32: expected int open_for_write
fs/orangefs/file.c:119:32: got restricted fmode_t
Turning open_for_write and open_for_read into booleans (which is how
they're used) removes this warning.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-4-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Attempting to build orangefs with W=1 currently reports errors like:
In file included from ../fs/orangefs/protocol.h:287,
from ../fs/orangefs/waitqueue.c:16:
../fs/orangefs/orangefs-debug.h:86:18: error: ‘num_kmod_keyword_mask_map’ defined but not used [-Werror=unused-const-variable=]
Move num_kmod_keyword_mask_map, s_kmod_keyword_mask_map and
struct __keyword_mask_s to orangefs-debugfs.c which is the only file
they're used in.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-3-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'len' is used to store the result of i_size_read(), so making 'len'
a size_t results in truncation to 4GiB on 32-bit systems.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-2-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In function create_ib_ah() the following line attempts
to left shift the return value of mlx5r_ib_rate() by 4
and store it in the stat_rate_sl member of av:
However the code overlooks the fact that mlx5r_ib_rate()
may return -EINVAL if the rate passed to it is less than
IB_RATE_2_5_GBPS or greater than IB_RATE_800_GBPS.
Because of this, the code may invoke undefined behaviour when
shifting a signed negative value when doing "-EINVAL << 4".
To fix this check for errors before assigning stat_rate_sl and
propagate any error value to the callers.
Fixes: c534ffda781f ("RDMA/mlx5: Fix AH static rate parsing")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250304140246.205919-1-qasdev00@gmail.com
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The recent rewrite with the use of regular atomic helpers broke the
DPMS unblanking on X11. Fix it by moving the call of
bochs_hw_blank(false) from CRTC mode_set_nofb() to atomic_enable().
Fixes: 2037174993c8 ("drm/bochs: Use regular atomic helpers")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1238209
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304134203.20534-1-tiwai@suse.de
|
|
The byte initialization values used with -ftrivial-auto-var-init=pattern
(CONFIG_INIT_STACK_ALL_PATTERN=y) depends on the compiler, architecture,
and byte position relative to struct member types. On i386 with Clang,
this includes the 0xFF value, which means it looks like nothing changes
between the leaf byte filling pass and the expected "stack wiping"
pass of the stackinit test.
Use the byte fill value of 0x99 instead, fixing the test for i386 Clang
builds.
Reported-by: ernsteiswuerfel
Closes: https://github.com/ClangBuiltLinux/linux/issues/2071
Fixes: 8c30d32b1a32 ("lib/test_stackinit: Handle Clang auto-initialization pattern")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250304225606.work.030-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The variable "compact_result" is not initialized in function
__alloc_pages_slowpath(). It causes should_compact_retry() to use an
uninitialized value.
Initialize variable "compact_result" with the value COMPACT_SKIPPED.
BUG: KMSAN: uninit-value in __alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
alloc_pages_mpol+0x4cd/0x890 mm/mempolicy.c:2270
alloc_frozen_pages_noprof mm/mempolicy.c:2341 [inline]
alloc_pages_noprof mm/mempolicy.c:2361 [inline]
folio_alloc_noprof+0x1dc/0x350 mm/mempolicy.c:2371
filemap_alloc_folio_noprof+0xa6/0x440 mm/filemap.c:1019
__filemap_get_folio+0xb9a/0x1840 mm/filemap.c:1970
grow_dev_folio fs/buffer.c:1039 [inline]
grow_buffers fs/buffer.c:1105 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x2c9/0xab0 fs/buffer.c:1431
getblk_unmovable include/linux/buffer_head.h:369 [inline]
ext4_getblk+0x3b7/0xe50 fs/ext4/inode.c:864
ext4_bread_batch+0x9f/0x7d0 fs/ext4/inode.c:933
__ext4_find_entry+0x1ebb/0x36c0 fs/ext4/namei.c:1627
ext4_lookup_entry fs/ext4/namei.c:1729 [inline]
ext4_lookup+0x189/0xb40 fs/ext4/namei.c:1797
__lookup_slow+0x538/0x710 fs/namei.c:1793
lookup_slow+0x6a/0xd0 fs/namei.c:1810
walk_component fs/namei.c:2114 [inline]
link_path_walk+0xf29/0x1420 fs/namei.c:2479
path_openat+0x30f/0x6250 fs/namei.c:3985
do_filp_open+0x268/0x600 fs/namei.c:4016
do_sys_openat2+0x1bf/0x2f0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x2a1/0x310 fs/open.c:1454
x64_sys_call+0x36f5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:258
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable compact_result created at:
__alloc_pages_slowpath+0x66/0x16c0 mm/page_alloc.c:4218
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
Link: https://lkml.kernel.org/r/tencent_ED1032321D6510B145CDBA8CBA0093178E09@qq.com
Reported-by: syzbot+0cfd5e38e96a5596f2b6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0cfd5e38e96a5596f2b6
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
