summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-15skbuff: Fix offset error in skb_reorder_vlan_headerVlad Yasevich
skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1117 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15pptp: verify sockaddr_len in pptp_bind() and pptp_connect()WANG Cong
Reported-by: Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ravb: Add disable 10baseKazuya Mizuguchi
Ethernet AVB does not support 10 Mbps transfer speed. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sh_eth: fix descriptor access endiannessSergei Shtylyov
The driver never calls cpu_to_edmac() when writing the descriptor address and edmac_to_cpu() when reading it, although it should -- fix this. Note that the frame/buffer length descriptor field accesses also need fixing but since they are both 16-bit we can't use {cpu|edmac}_to_{edmac|cpu}()... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sh_eth: fix TX buffer byte-swappingSergei Shtylyov
For the little-endian SH771x kernels the driver has to byte-swap the RX/TX buffers, however yet unset physcial address from the TX descriptor is used to call sh_eth_soft_swap(). Use 'skb->data' instead... Fixes: 31fcb99d9958 ("net: sh_eth: remove __flush_purge_region") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14net: fix IP early demux racesEric Dumazet
David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by: David J. Wilder <dwilder@us.ibm.com> Tested-by: David J. Wilder <dwilder@us.ibm.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15drm: Don't overwrite UNVERFIED mode status to OKVille Syrjälä
The way the mode probing works is this: 1. All modes currently on the mode list are marked as UNVERIFIED 2. New modes are on the probed_modes list (they start with status OK) 3. Modes are moved from the probed_modes list to the actual mode list. If a mode already on the mode list is deemed to match one of the probed modes, the duplicate is dropped and the mode status updated to OK. After this the probed_modes list will be empty. 4. All modes on the mode list are verified to not violate any constraints. Any that do are marked as such. 5. Any mode left with a non-OK status is pruned from the list, with an appropriate debug message. What all this means is that any mode on the original list that didn't have a duplicate on the probed_modes list, should be left with status UNVERFIED (or previously could have been left with some other status, but never OK). I broke that in commit 05acaec334fc ("drm: Reorganize probed mode validation") by always assigning something to the mode->status during the validation step. So any mode from the old list that still passed the validation would be left on the list with status OK in the end. Fix this by not doing the basic mode validation unless the mode already has status OK (meaning it came from the probed_modes list, or at least a duplicate of it was on that list). This way we will correctly prune away any mode from the old mode list that didn't appear on the probed_modes list. Cc: stable@vger.kernel.org Cc: Adam Jackson <ajax@redhat.com> Fixes: 05acaec334fc ("drm: Reorganize probed mode validation") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_force_connector_basic/prune-stale-modes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332 [danvet: Also applying to drm-misc to avoid too much conflict hell - there's a big pile of patches from Ville on top of this one.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-12-14Merge tag 'sunxi-fixes-for-4.4' of ↵Kevin Hilman
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 4.4" from Maxime Ripard: Allwinner fixes for 4.4 Two patches, one to fix the touchscreen axis on one Allwinner board, and the other one fixing a mutex unlocking issue on one error path in the RSB driver. * tag 'sunxi-fixes-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: bus: sunxi-rsb: unlock on error in sunxi_rsb_read() ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
2015-12-15Merge tag 'drm-intel-fixes-2015-12-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Here are some i915 fixes for v4.4, sorry for being late this week. * tag 'drm-intel-fixes-2015-12-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Do a better job at disabling primary plane in the noatomic case. drm/i915/skl: Double RC6 WRL always on drm/i915/skl: Disable coarse power gating up until F0 drm/i915: Remove incorrect warning in context cleanup
2015-12-15Merge tag 'omapdrm-4.4-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes omapdrm fix for 4.4 * tag 'omapdrm-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: fix fbdev pix format to support all platforms
2015-12-14Merge branches 'powercap', 'pm-cpufreq' and 'pm-domains'Rafael J. Wysocki
* powercap: powercap / RAPL: fix BIOS lock check * pm-cpufreq: cpufreq: intel_pstate: Minor cleanup for FRAC_BITS cpufreq: tegra: add regulator dependency for T124 * pm-domains: PM / Domains: Allow runtime PM callbacks to be re-used during system PM
2015-12-14sh_eth: uninline sh_eth_{write|read}()Sergei Shtylyov
Commit 3365711df024 ("sh_eth: WARN on access to a register not implemented in in a particular chip") added WARN_ON() to sh_eth_{read|write}(), thus making it unacceptable for these functions to be *inline* anymore. Remove *inline* and move the functions from the header to the driver itself. Below is our code economy with ARM gcc 4.7.3: $ size drivers/net/ethernet/renesas/sh_eth.o{~,} text data bss dec hex filename 32489 1140 0 33629 835d drivers/net/ethernet/renesas/sh_eth.o~ 25413 1140 0 26553 67b9 drivers/net/ethernet/renesas/sh_eth.o Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14stmmac: dwmac-sunxi: Call exit cleanup function in probe error pathChen-Yu Tsai
dwmac-sunxi has 2 callbacks that were called from stmmac_platform as part of the probe and remove sequences. Ater the conversion of dwmac-sunxi into a standalone platform driver, the .init function is called before calling into the stmmac driver core, but .exit is not called to clean up if stmmac returns an error. This patch fixes the probe error path. This properly cleans up and releases resources when the driver core fails to probe. Cc: Joachim Eastwood <manabian@gmail.com> Fixes: 9a9e9a1edee8 ("stmmac: dwmac-sunxi: turn setup callback into a probe function") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14net: add validation for the socket syscall protocol argumentHannes Frederic Sowa
郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70 kernel: [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80 kernel: [<ffffffff81645069>] SYSC_connect+0xd9/0x110 kernel: [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80 kernel: [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [<ffffffff81645e0e>] SyS_connect+0xe/0x10 kernel: [<ffffffff81779515>] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang <cwang@twopensource.com> Reported-by: 郭永刚 <guoyonggang@360.cn> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14net: phy: mdio-mux: Check return value of mdiobus_alloc()Tobias Klauser
mdiobus_alloc() might return NULL, but its return value is not checked in mdio_mux_init(). This could potentially lead to a NULL pointer dereference. Fix it by checking the return value Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14openvswitch: fix trivial comment typoPaolo Abeni
The commit 33db4125ec74 ("openvswitch: Rename LABEL->LABELS") left over an old OVS_CT_ATTR_LABEL instance, fix it. Fixes: 33db4125ec74 ("openvswitch: Rename LABEL->LABELS") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14[IA64] Enable mlock2 syscall for ia64Tony Luck
New system call added in commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e mm: mlock: add new mlock system call Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, specifically for nf_tables and nfnetlink_queue, they are: 1) Avoid a compilation warning in nfnetlink_queue that was introduced in the previous merge window with the simplification of the conntrack integration, from Arnd Bergmann. 2) nfnetlink_queue is leaking the pernet subsystem registration from a failure path, patch from Nikolay Borisov. 3) Pass down netns pointer to batch callback in nfnetlink, this is the largest patch and it is not a bugfix but it is a dependency to resolve a splat in the correct way. 4) Fix a splat due to incorrect socket memory accounting with nfnetlink skbuff clones. 5) Add missing conntrack dependencies to NFT_DUP_IPV4 and NFT_DUP_IPV6. 6) Traverse the nftables commit list in reverse order from the commit path, otherwise we crash when the user applies an incremental update via 'nft -f' that deletes an object that was just introduced in this batch, from Xin Long. Regarding the compilation warning fix, many people have sent us (and keep sending us) patches to address this, that's why I'm including this batch even if this is not critical. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14perf record: Support custom vmlinux pathHe Kuang
Make perf-record command support --vmlinux option if BPF_PROLOGUE is on. 'perf record' needs vmlinux as the source of DWARF info to generate prologue for BPF programs, so path of vmlinux should be specified. Short name 'k' has been taken by 'clockid'. This patch skips the short option name and uses '--vmlinux' for vmlinux path. Documentation is also updated. Test result: In a production (or broken) environment: (by: # rm -rf ~/.debug/ # mv /lib/modules/`uname -r`/build/vmlinux /tmp/ ) # ./perf record -e ./test_bpf_base.c ls Failed to find the path for kernel: No such file or directory event syntax error: './test_bpf_base.c' \___ You need to check probing points in BPF file ... # ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data ] Help messages when build with NO_LIBBPF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_LIBBPF=1) # ./perf record --vmlinux /tmp/vmlinux ls / Warning: option `vmlinux' is being ignored because NO_LIBBPF=1 ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ] Help messages when build with NO_DWARF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf tools: Make options always available, even if required libs not linkedWang Nan
This patch keeps options of perf builtins same in all conditions. If one option is disabled because of compiling options, users should be notified. Masami suggested another implementation in [1] that, by adding a OPTION_NEXT_DEPENDS option before those options in the 'struct option' array, options parser knows an option is disabled. However, in some cases this array is reordered (options__order()). In addition, in parse-option.c that array is const, so we can't simply merge information in decorator option into the affacted option. This patch chooses a simpler implementation that, introducing a set_option_nobuild() function and two option parsing flags. Builtins with such options should call set_option_nobuild() before option parsing. The complexity of this patch is because we want some of options can be skipped safely. In this case their arguments should also be consumed. Options in 'perf record' and 'perf probe' are fixed in this patch. [1] http://lkml.kernel.org/g/50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net Test result: Normal case: # ./perf probe --vmlinux /tmp/vmlinux sys_write Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 Build with NO_DWARF=1: # ./perf probe -L sys_write Error: switch `L' is not available because NO_DWARF=1 Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] or: perf probe [<options>] --del '[GROUP:]EVENT' ... or: perf probe --list [GROUP:]EVENT ... or: perf probe [<options>] --funcs -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) # ./perf probe -k /tmp/vmlinux sys_write Warning: switch `k' is being ignored because NO_DWARF=1 Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 # ./perf probe --vmlinux /tmp/vmlinux sys_write Warning: option `vmlinux' is being ignored because NO_DWARF=1 Added new event: [SNIP] # ./perf probe -l Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... -k, --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) ... -V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT> Show accessible variables on PROBEDEF (not built-in because NO_DWARF=1) --externs Show external variables too (with --vars only) (not built-in because NO_DWARF=1) --no-inlines Don't search inlined functions (not built-in because NO_DWARF=1) --range Show variables location range in scope (with --vars only) (not built-in because NO_DWARF=1) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf tools: Convert parse-options.c internal functions to staticJosh Poimboeuf
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/c027b5f47ec1055077f5650edb1c7ad37c191e6c.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf tools: Move help_unknown_cmd() to its own fileJosh Poimboeuf
help_unknown_cmd() is quite perf-specific because it relies on some perf_config*() functions. Move it and its supporting functions out into a separate file so that help.c can be moved to a library. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/562d918bcaaf340c1ae3e47586b3f0ae33b9918b.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf tools: Remove check for unused PERF_PAGER_IN_USEJosh Poimboeuf
PERF_PAGER_IN_USE doesn't seem to be used anywhere, so let's remove it. This will also make it easier to move pager.c into a separate library. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ed9e8370db9811746dc590544cf48c36dcfb1731.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14KVM: VMX: Fix host initiated access to guest MSR_TSC_AUXHaozhong Zhang
The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-14perf tools: Create pager.hJosh Poimboeuf
Move the 'pager' function prototypes into a new pager.h so that the pager code can be moved out to a library. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ba7c316474dd6bfc047e5c6dc4dcab39a982caf5.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf build: Rename LIB_PATH -> API_PATHJosh Poimboeuf
'LIB_PATH' is a misnomer because there are multiple library paths. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/c10df0b749a27f05cc531fe06b8dd71a329341fa.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf build: Fix 'make clean'Josh Poimboeuf
Add some missing files to the 'make clean' target. Reported-and-Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/8b1f5a5bd66a652be071d423e64aaa994254be31.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf test: Remove tarpkg at end of testJosh Poimboeuf
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5e7e97a23e3ce11b59d1009b39ebb6d2813a0560.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf test: Add Build file to dependencies for llvm-src-*.cJosh Poimboeuf
Because the Build file writes source code to the generated llvm-src-*.c files, it should be listed as one of the dependencies, so that any future changes to the code being echoed won't require a 'make clean'. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/9b9886c295750dc83cbbb29a665d280f9c5e8b3e.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf build: Remove unnecessary line in Makefile.featureJosh Poimboeuf
This line always silently fails because it doesn't add the 'test-' prefix to the .bin file. And it seems to be unnecessary anyway: the line immediately after it does all the individual feature checks. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/554a05c18af564ba015c9e68f25730126e0f4acb.1449965119.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf test: Fix hist testcases when kptr_restrict is onNamhyung Kim
Currently if kptr_restrict is enabled, all hist tests failed with segfaults. This is because machine__create_kernel_maps() in setup_fake_machine() failed in that situation, and it called machine__delete() on the error path. But outer callers again called machines__exit() causing double free for the host machine. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1450062673-22312-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf evsel: Disable branch flags/cycles for --callgraph lbrAndi Kleen
[The kernel patch needed for this is in tip now (b16a5b52eb9 perf/x86: Add option to disable ...) So this user tools patch to make use of it should be merged now] Automatically disable collecting branch flags and cycles with --call-graph lbr. This allows avoiding a bunch of extra MSR reads in the PMI on Skylake. When the kernel doesn't support the new flags they are automatically cleared in the fallback code. v2: Switch to use branch_sample_type instead of sample_type. Adjust description. Fix the fallback logic. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1449879144-29074-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf thread: Fix reference count initial stateArnaldo Carvalho de Melo
We should always return from thread__new(), the constructor, with the object with a reference count of one, so that: struct thread *thread = thread__new(); thread__put(thread); Will call thread__delete(). If any reference is made to that 'thread' variable, it better use thread__get(thread) to hold a reference. We were returning with thread->refcnt set to zero, fix it and some cases where thread__delete() was being called, which were not a problem because just one reference was being used, now that we set it to 1, use thread__put() instead. Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-4b9mkuk66to4ecckpmpvqx6s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf test: Dump the stack when test segfaults when in verbose modeArnaldo Carvalho de Melo
E.g.: # perf test 26 26: Test mmap thread lookup : FAILED! # perf test -v 26 26: Test mmap thread lookup : --- start --- test child forked, pid 9269 tid = 9269, map = 0x7ff99ff0c000 tid = 9270, map = 0x7ff99ff0b000 tid = 9271, map = 0x7ff99ff0a000 tid = 9272, map = 0x7ff99ff09000 perf: Segmentation fault Obtained 13 stack frames. perf(sighandler_dump_stack+0x41) [0x4e3541] /lib64/libc.so.6(+0x34960) [0x7ff99d5f6960] perf(thread__put+0x5b) [0x4c6f6b] perf(machine__process_event+0x14e) [0x4bd37e] perf(perf_event__synthesize_threads+0x3aa) [0x48678a] perf(test__mmap_thread_lookup+0x20a) [0x474e0a] perf() [0x460d56] perf(cmd_test+0x589) [0x461319] perf() [0x47c641] perf(main+0x617) [0x422317] /lib64/libc.so.6(__libc_start_main+0xf0) [0x7ff99d5e1fe0] perf() [0x422429] [(nil)] test child interrupted ---- end ---- Test mmap thread lookup: FAILED! # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-sypazzsl4ptctrmlyi2zcmaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14perf tools: Use same signal handling strategy as 'record'Arnaldo Carvalho de Melo
I.e. don't exit with the signal number, instead set the signal handler to the default one and then raise it again. Noticed while trying to dump the stack at segfaults in the 'perf test' forked process used to run each test, that inspects signal info at each test. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5x5r176wnoqxi5p6id05wv9w@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14iommu/vt-d: Do access checks before calling handle_mm_fault()Joerg Roedel
Not doing so is a bug and might trigger a BUG_ON in handle_mm_fault(). So add the proper permission checks before calling into mm code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-14iommu/amd: Do proper access checking before calling handle_mm_fault()Joerg Roedel
The handle_mm_fault function expects the caller to do the access checks. Not doing so and calling the function with wrong permissions is a bug (catched by a BUG_ON). So fix this bug by adding proper access checking to the io page-fault code in the AMD IOMMUv2 driver. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-12-14MAINTAINERS: pinctrl: Add maintainers for pinctrl-singleTony Lindgren
Otherwise we keep missing patches related to this driver. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-14xen/x86/pvh: Use HVM's flush_tlb_others opBoris Ostrovsky
Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-14pinctrl: bcm2835: Fix initial value for direction_outputStefan Wahren
Currently the provided initial value for bcm2835_gpio_direction_output has no effect. So fix this issue by changing the value before changing the GPIO direction. As a result we need to move the function below bcm2835_gpio_set. Suggested-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Fixes: e1b2dc70cd5b ("pinctrl: add bcm2835 driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-14ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFlyAnssi Hannula
Avoid getting sample rate on AudioQuest DragonFly as it is unsupported and causes noisy "cannot get freq at ep 0x1" messages when playback starts. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-14ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFlyAnssi Hannula
AudioQuest DragonFly DAC reports a volume control range of 0..50 (0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which is obviously incorrect and would cause software using the dB information in e.g. volume sliders to have a massive volume difference in 100..102% range. Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some devices") added a dB range mapping for it with range 0..50 dB. However, the actual volume mapping seems to be neither linear volume nor linear dB scale, but instead quite close to the cubic mapping e.g. alsamixer uses, with a range of approx. -53...0 dB. Replace the previous quirk with a custom dB mapping based on some basic output measurements, using a 10-item range TLV (which will still fit in alsa-lib MAX_TLV_RANGE_SIZE). Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the range is 0..50, so if this gets fixed/changed in later HW revisions it will no longer be applied. v2: incorporated Takashi Iwai's suggestion for the quirk application method Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-14genirq: Free irq_desc with rcuThomas Gleixner
The new VMD device driver needs to iterate over a list of "demultiplexing" interrupts. Protecting that list with a lock is not possible because the list is also required in code pathes which hold irq descriptor lock. Therefor the demultiplexing interrupt handler would create a lock inversion scenario if it calls a demux handler with the list protection lock held. A solution for this is to free the irq descriptor via RCU, so the list can be walked with rcu read lock held. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Keith Busch <keith.busch@intel.com>
2015-12-14genirq: Prevent chip buslock deadlockThomas Gleixner
If a interrupt chip utilizes chip->buslock then free_irq() can deadlock in the following way: CPU0 CPU1 interrupt(X) (Shared or spurious) free_irq(X) interrupt_thread(X) chip_bus_lock(X) irq_finalize_oneshot(X) chip_bus_lock(X) synchronize_irq(X) synchronize_irq() waits for the interrupt thread to complete, i.e. forever. Solution is simple: Drop chip_bus_lock() before calling synchronize_irq() as we do with the irq_desc lock. There is nothing to be protected after the point where irq_desc lock has been released. This adds chip_bus_lock/unlock() to the remove_irq() code path, but that's actually correct in the case where remove_irq() is called on such an interrupt. The current users of remove_irq() are not affected as none of those interrupts is on a chip which requires buslock. Reported-by: Fredrik Markström <fredrik.markstrom@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2015-12-14Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Fix 'perf top' annotation in --stdio (Namhyung Kim) - Support hw breakpoint events (mem:0xAddress) in the default output mode in 'perf script' (Wang Nan) Infrastructure changes: - Do not hold the hists lock while emitting one specific warning (Namhyung Kim) - Fetch map names from correct strtab, worked so far because llvm/clang uses just one string table (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-14Merge tag 'v4.4-rc5' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-14x86/entry/64_compat: Make labels localBorislav Petkov
... so that they don't appear as symbols in the final ELF. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1449916077-6506-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-14drm/omap: fix fbdev pix format to support all platformsTomi Valkeinen
omap_fbdev always creates a framebuffer with ARGB8888 pixel format. On OMAP3 we have VIDEO1 overlay that does not support ARGB8888, and on OMAP2 none of the overlays support ARGB888. This patch changes the omap_fbdev's fb to XRGB8888, which is supported by all platforms. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-13net: Flush local routes when device changes vrf associationDavid Ahern
The VRF driver cycles netdevs when an interface is enslaved or released: the down event is used to flush neighbor and route tables and the up event (if the interface was already up) effectively moves local and connected routes to the proper table. As of 4f823defdd5b the local route is left hanging around after a link down, so when a netdev is moved from one VRF to another (or released from a VRF altogether) local routes are left in the wrong table. Fix by handling the NETDEV_CHANGEUPPER event. When the upper dev is an L3mdev then call fib_disable_ip to flush all routes, local ones to. Fixes: 4f823defdd5b ("ipv4: fix to not remove local route on link down") Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-13net:hns: print MAC with %pMAndy Shevchenko
printf() has a dedicated specifier to print MAC addresses. Use it instead of pushing each byte via stack. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 04:26:23 +0000