summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-05ARM: dts: lpc18xx: add pl172 memory-controller nodeJoachim Eastwood
All devices in the LPC18xx/43xx familiy contain a ARM PL172 MultiPort Memory Controller (MPMC). Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05ARM: dts: lpc18xx: add pl111 lcd controller nodeJoachim Eastwood
NXP LPC185x and LPC435x/70 devices contain a ARM PL111 lcd controller. Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05ARM: dts: lpc18xx: add usb otg phy nodeJoachim Eastwood
Add the USB OTG phy under the CREG syscon node and attach it to the USB0 EHCI controller. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05ARM: dts: atlas7: add a GPIO key for rearview buttonAndy Sun
Touching this key will trigger a camera event for rearview. Signed-off-by: Andy Sun <Andy.Sun@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: put pinctl property to get pinmux for NANDHuayi Li
Nand controller often share some pins with sd/mmc controller on atlas and prima series, nand node can be disabled if the pins are used by sd/mmc controller. Signed-off-by: Huayi Li <huayi.li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add software digital radio nodes and its DMA channelsYonghui Zhang
this patch adds SDR(software digital raio) nodes and the DMA channels for it. Signed-off-by: Yonghui Zhang <yonghui.zhang@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add lost PWM nodeGuo Zeng
this patch adds lost PWM node, and also fixes the ranges of its parent node. Signed-off-by: Guo Zeng <guo.zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add lost G2D nodeDongli Li
this patch adds lost G2D node, and also fixes the range of its parent node. Signed-off-by: Dongli Li <Kasin.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add multimedia codec nodeXiaofeng Fei
this patch adds multimedia video codec node, and also fixes the ranges of its parent node. Signed-off-by: Xiaofeng Fei <xiaofeng.fei@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add alias name for spi deviceQipan Li
spi framework can use alias name of spi device to retrieve the bus id, so bus id will not be dynamical but statical and it will be easier for test for a specified spi device with a fixed name like use spidev. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add lost gmac nodeYe He
this patch adds lost ethernet gmac node, and also fix the ranges of its parent node. Signed-off-by: Ye He <ye.he@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add performance monitor unit nodeYe He
Signed-off-by: Ye He <ye.he@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: atlas7: add lost jpeg nodeLily.Li
this patch adds lost jpeg node, and also fix the ranges of its parent node. Signed-off-by: Lily.Li <Lily.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2015-08-05ARM: dts: am437x-gp-evm: Add eMMC supportRoger Quadros
Add eMMC pinmux and mmc2 related bits. We keep the mmc2 controller disabled as it conflits with gpmc/NAND. To enable emmc, simply set mmc2 controller node to "okay" and set the gpmc node to "disabled" and change the SelEMMCorNAND gpio-hog to output-high. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: am437x-gp-evm: Add gpio-hog for configuring eMMC/NAND driverRoger Quadros
On this board either eMMC or NAND can work based on the level of spi2_cs0.gpio0_23. Add a gpio-hog to enable configuration of this pin in the device tree. Move pinmux for spi2_cs0 (SEL_eMMCorNANDn) out of NAND node into gpio0 so it is initialized with gpio0. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: am43xx: Introduce MUX_MODE9 for pinctrlDave Gerlach
Some pins on AM43XX support MODE9 for the pinctrl settings so add a binding to describe this. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra72-evm: Fix spurious card insert/removal interruptKishon Vijay Abraham I
ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fix it by making ldo1_reg as always_on. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7-evm: Fix spurious card insert/removal interruptKishon Vijay Abraham I
ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fix it by making ldo1_reg as always_on. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: am57xx-beagle-x15: mmc1: remove redundant pbias-supply propertyKishon Vijay Abraham I
pbias-supply is initialized in dra7.dtsi. Remove redundant initialization of pbias-supply from MMC1 dt node in am57xx-beagle-x15.dts Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7-evm: Add MMCSD card removal GPIONishanth Menon
SDMMC Card Detect can be used over default GPIO map. Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2Kishon Vijay Abraham I
MMC1 supports SDR104 and MMC2 supports HS200 both of which requires 192MHz clock. Set the maximum operating clock frequency to 192 MHz. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7-evm: add evm_3v3_sd regulatorBalaji T K
Add a node for evm_3v3_sd using onboard pcf GPIO expander which feeds on to mmc vdd. Update mapping for vmmc-supply and vmmc_aux-supply. evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra72-evm: add evm_3v3_sd regulatorKishon Vijay Abraham I
Add a node for evm_3v3_sd using pcf which feeds on to mmc vdd. Update mapping for vmmc-supply and vmmc_aux-supply. evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: AM4372: Add the wkup_m3_ipc nodeSuman Anna
Add the Wakeup M3 IPC device node for the wkup_m3_ipc driver on AM4372 SoC. This node uses the IPC registers, part of the Control Module, and is therefore added as a child of the scm node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: AM33xx: Add the wkup_m3_ipc nodeSuman Anna
Add the Wakeup M3 IPC node for the wkup_m3_ipc driver on AM33xx SoCs. This node uses the IPC registers, part of the Control Module, and is therefore added as a child of the scm node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7: Add scm_conf@1c04 nodeRoger Quadros
This region contains CTRL_CORE_SMA_SW2..9 registers which are not specific to any domain and can be reasonably accessed via syscon driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7: fix pinmux@1400 resource lengthRoger Quadros
We need to add 4 bytes to include the last 32-bit register space. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05ARM: dts: dra7: Remove ctrl_core and ctrl_general nodesRoger Quadros
These nodes are wrongly placed. They must come under the scm node. Nobody uses them either so get rid of them. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05Merge tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
mvebu dt changes for v4.3 (part #2) Add support Buffalo Linkstation LS-WTGL * tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu: ARM: dts: orion5x: add buffalo linkstation ls-wtgl Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/dtOlof Johansson
arm: Xilinx Zynq dt patches for v4.3 - Add ECC for Synopsys MC - Add OCM, pushbuttons to zc702 * tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys ARM: zynq: DT: Add missing interrupt for L2 pl310 Documentation: devicetree: Add ECC information to synopsys ddr controller ARM: dts: zynq: Add OCM node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm ↵Olof Johansson
into next/dt Qualcomm ARM Based Device Tree Updates for v4.3 * Switch to use pinctrl compatible for GPIOs * Add RPM regulators for MSM8960 * Add SPI Ethernet support on MSM8960 CDP * Add SMEM support along with dependencies * Add PM8921 support for GPIO and MPP * Fix GSBI cell index * Switch to use real regulators on APQ8064 w/ SDCC * tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm: ARM: dts: qs600: Add real regulators to sdcc ARM: dts: ifc6410: add real regulators for sdcc nodes. ARM: dts: apq8064: remove temporary fixed regulator for mmc ARM: dts: apq8064: fix missing gsbi cell-index ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux ARM: dts: apq8064: add pm8921 mpp support ARM: dts: apq8064: Add pm8921 mfd and its gpio node ARM: dts: msm8974: Add smem reservation and node ARM: dts: msm8974: Add tcsr mutex node ARM: dts: qcom: Add ks8851 node for wired ethernet ARM: dts: qcom: Add MSM8960 CDP RPM regulators ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes ARM: dts: qcom: Replace gpio node with pinctrl node ARM: dts: qcom: Replace gpio node with pinctrl node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'at91-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt First batch of DT changes for 4.3: - some fixes on sama5d4 ADC definition - adding Image Sensor Interface (aka ISI) on at91sam9m10g45ek board - update rst controller compatible string on sama5 machines - new sama5d2 DT definition and its reference board: the sama5d2 Xplained. Minimal configuration for now. * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: add minimal sama5d2 Xplained board ARM: at91/dt: add basic dtsi for sama5d2 SoC ARM: at91/dt: sama5: update rstc to correct compatible string ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees ARM: at91/dt: sama5d4: fix external trigger property Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO led1-high (chip sh73a0_pfc, offset 20) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the ranges are added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-05ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO lcd0 (chip r8a7740_pfc, offset 176) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the range is added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-05ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO led1-high (chip r8a73a4_pfc, offset 28) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the ranges are added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-04ARM: dts: dra7: Add named interrupt property for dwc3Roger Quadros
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-04ARM: dts: omap5: Add named interrupt property for dwc3Roger Quadros
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-04ARM: dts: am4372: Add named interrupt property for dwc3Felipe Balbi
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-03ARM: shmobile: silk: add eMMC DT supportSergei Shtylyov
Define the SILK board dependent part of the MMCIF device node (the board has eMMC chip) along with the necessary voltage regulator (note that the Vcc/Vccq regulator is dummy -- it's required by the MMCIF driver but doesn't actually exist on the board). Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-03ARM: shmobile: r8a7794: add MMCIF DT supportSergei Shtylyov
Define the generic R8A7794 part of the MMCIF0 device node. Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-01ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseqHans de Goede
The wifi-enable pin of the ap6210 module is not really a regulator, switch to the mmc-pwrseq framework for controlling it. This more accurately reflects how the hardware actually works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Changed the name of the pinctrl node and re-ordered it] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: hsg-h702: Enable USB OTG controllerChen-Yu Tsai
This tablet has proper USB OTG support, using 3 GPIO pins for ID and VBUS detection, and also VBUS control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADCChen-Yu Tsai
The tablet has volume up/down buttons on the side, connected to the LRADC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tabletHans de Goede
Enable the otg/drc usb controller on the Ippo Q8H-A33 tablet, for now it is enabled in host-only mode, because true OTG support requires support for detecting and enabling Vbus through the axp221 pmic. For this to work the Vbus on the port must be enabled by u-boot, or a powered hub must be used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A13 OLinuxInoMark Janssen
Enable the otg/drc usb controller on the A13 OLinuxIno. Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno MicroHans de Goede
Enable the otg/drc usb controller on the A10s OLinuxIno Micro. Note the A10s OlinuxIno Micro always has some voltage on its otg power pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is enough to make vbus-det always report 1, so we do not use vbus-det on this board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno LimeRemy van Elst
Enable the otg/drc usb controller on the A10 OLinuxIno Lime. Signed-off-by: Remy van Elst <relst@relst.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keysEzra Savard
Adds the two MIO connected pushbuttons on the zc702 board to the devicetree as a single multi-key device for us with the gpio-keys driver. Signed-off-by: Ezra Savard <ezra.savard@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-31ARM: zynq: DT: Add missing interrupt for L2 pl310Alex Wilson
Add pl310 interrupt to the Zynq devicetree. Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-31Documentation: devicetree: Add ECC information to synopsys ddr controllerPunnaiah Choudary Kalluri
Add ECC information to synopsys ddr memory controller. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-09-10 22:15:55 +0000