summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-24habanalabs: remove unused hashOmer Shpigelman
Remove an old hash that is not in use anymore. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: use queue pi/ci in order to determine queue occupancyOfir Bitton
Instead of using the free slots amount on the compute CQ to determine whether we can submit work to queues, use the queues pi/ci. This is needed in future ASICs where we don't have CQ per queue. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: configure maximum queues per asicOfir Bitton
Currently the amount of maximum queues is statically configured. Using a static value is causing redundunt cycles when traversing all queues and consumes more memory than actually needed. In this patch we configure each asic with the exact number of queues needed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: remove soft-reset support from GAUDIOded Gabbay
Soft-reset isn't supported in GAUDI. Remove the code that performs it and print error in case the user wants to do it via sysfs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-24habanalabs: PCIe iATU refactoringOfir Bitton
Divide iATU initialization into inbound/outbound methods. We must separate it in order to enable different match mode per PCIe region. In addition, added support for PCI address match mode. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Extract ECC information from FWOded Gabbay
ECC (Error Correcting Code) interrupts are going to be handled by the FW. Hence, we define an interface in which the driver can obtain the relevant ECC information. This information is needed for monitoring and can also lead to a hard reset if ECC error is not correctable. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Add dropped cs statistics info structOfir Bitton
Add command submission statistics structure which can be obtained through the info ioctl. Each drop counter describes the reason for which the command submission was dropped. This information is needed for the user to be aware of the specific reason for which the submitted work was dropped. The user can then utilize the driver more efficiently. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: extract cpu boot status lookupChristine Gharzuzi
Extract detection of the cpu boot status to a function to allow code reuse Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: rephrase error messagesOded Gabbay
rephrase some error/warning/notice messages to make them more accessible to ordinary users. There is no need to print context ASID as the driver currently doesn't support multiple contexts. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-24habanalabs: Increase queues depthOfir Bitton
After recent concurrent cs amount increase, we must also increase queues depth since much more concurrent work can be done. All external queue depths were increased to 4096 as gaudi's internal queue depths were also increased to 1024. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: rephrase error messageOmer Shpigelman
Rephrase F/W error message to make it more understandable to ordinary users. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: calculate trace frequency from PLLAdam Aharon
The profiler needs to know the PLL values for correctly showing the profiling data. Because our firmware can use different PLL configurations, we need to read the PLL values from the ASIC to pass them to the profiler. Signed-off-by: Adam Aharon <aaharon@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: align armcp_packet structure to 8 bytesOded Gabbay
Once there is a 64-bit field in a structure, GCC compiler for ARM aligns the structure to 8 bytes. In order to avoid confusion when these structures are being passed between CPUs from different architectures, we explicitly align the structure to 8 bytes. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24uapi/habanalabs: fix some commentsOded Gabbay
MAP/UNMAP are done also for device memory. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Use mask instead of shift in sync stream registersOfir Bitton
Use proper bitfield masks instead of shifting values when configuring packets sent to device. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: sync stream generic functionalityOfir Bitton
Currently sync stream is limited only for external queues. We want to remove this constraint by adding a new queue property dedicated for sync stream. In addition we move the initialization and reset methods to the common code since we can re-use them with slight changes. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Use pending CS amount per ASICOfir Bitton
Training schemes requires much more concurrent command submissions than inference does. In addition, training command submissions can be completed in a non serialized manner. Hence, we add support in which each ASIC will be able to configure the amount of concurrent pending command submissions, rather than use a predefined amount. This change will enhance performance by allowing the user to add more concurrent work without waiting for the previous work to be completed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: remove rate limiters from GAUDIOded Gabbay
We no longer need to initialize the rate limiters in GAUDI A1. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24thermal: core: Fix thermal zone lookup by IDThierry Reding
When a thermal zone is looked up by an ID and no zone is found matching that ID, the thermal_zone_get_by_id() function will return a pointer to the thermal zone list head which isn't actually a valid thermal zone. This can lead to a subsequent crash because a valid pointer is returned to the called, but dereferencing that pointer as struct thermal_zone is not safe. Fixes: 329b064fbd13 ("thermal: core: Get thermal zone by id") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200724170105.2705467-1-thierry.reding@gmail.com
2020-07-24arm64: enable time namespace supportAndrei Vagin
CONFIG_TIME_NS is dependes on GENERIC_VDSO_TIME_NS. Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200624083321.144975-7-avagin@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-24arm64/vdso: Restrict splitting VVAR VMAAndrei Vagin
Forbid splitting VVAR VMA resulting in a stricter ABI and reducing the amount of corner-cases to consider while working further on VDSO time namespace support. As the offset from timens to VVAR page is computed compile-time, the pages in VVAR should stay together and not being partically mremap()'ed. Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200624083321.144975-6-avagin@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-24arm64/vdso: Handle faults on timens pageAndrei Vagin
If a task belongs to a time namespace then the VVAR page which contains the system wide VDSO data is replaced with a namespace specific page which has the same layout as the VVAR page. Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200624083321.144975-5-avagin@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-24ASoC: dapm: don't call pm_runtime_* on card deviceTzung-Bi Shih
runtime_usage of sound card has been observed to grow without bound. For example: $ cat /sys/devices/platform/sound/power/runtime_usage 46 $ sox -n -t s16 -r 48000 -c 2 - synth 1 sine 440 vol 0.1 | \ aplay -q -D hw:0,0 -f S16_LE -r 48000 -c 2 $ cat /sys/devices/platform/sound/power/runtime_usage 52 Commit 4e872a46823c ("ASoC: dapm: Don't force card bias level to be updated") stops to force update bias_level on card. If card doesn't provide set_bias_level callback, the snd_soc_dapm_set_bias_level() is equivalent to NOP for card device. As a result, dapm_pre_sequence_async() doesn't change the bias_level of card device correctly. Thus, pm_runtime_get_sync() would be called in dapm_pre_sequence_async() without symmetric pm_runtime_put() in dapm_post_sequence_async(). Don't call pm_runtime_* on card device. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200724070731.451377-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ALSA: hda/realtek: typo_fix: enable headset mic of ASUS ROG Zephyrus ↵Armas Spann
G14(GA401) series with ALC289 This patch fixes a small typo I accidently submitted with the initial patch. The board should be named GA401 not G401. Fixes: ff53664daff2 ("ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289") Signed-off-by: Armas Spann <zappel@retarded.farm> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200724140837.302763-1-zappel@retarded.farm Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-24ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G15(GA502) series ↵Armas Spann
with ALC289 This patch adds support for headset mic to the ASUS ROG Zephyrus G15(GA502) notebook series by adding the corresponding vendor/pci_device id, as well as adding a new fixup for the used realtek ALC289. The fixup stets the correct pin to get the headset mic correctly recognized on audio-jack. Signed-off-by: Armas Spann <zappel@retarded.farm> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200724140616.298892-1-zappel@retarded.farm Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-24Merge tag 'icc-5.9-rc1' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman
into char-misc-next Georgi writes: interconnect changes for 5.9 Here are the interconnect changes for the 5.9-rc1 merge window consisting mostly of changes that give the core more flexibility in order to support some new provider drivers. Core changes: - Export of_icc_get_from_provider() - Relax requirement in of_icc_get_from_provider() - Allow inter-provider pairs to be configured - Mark all dummy functions as static inline Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.9-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: Mark all dummy functions as static inline interconnect: Allow inter-provider pairs to be configured interconnect: Relax requirement in of_icc_get_from_provider() interconnect: Export of_icc_get_from_provider()
2020-07-24dyndbg: export ddebug_exec_queriesJim Cromie
Export ddebug_exec_queries() for use by modules. This will allow module authors to control all their *pr_debug*s dynamically. And since ddebug_exec_queries() is what implements "echo $query >control", it gives the same per-callsite control. Virtues of this: - simplicity. just an export. - full control over any/all subsets of callsites. - same "query/command-string" in code and console - full callsite selectivity with module file line format Format in particular deserves special attention; it is where low-hanging fruit will be found. Consider: drivers/gpu/drm/amd/display/include/logger_types.h: #define DC_LOG_SURFACE(...) pr_debug("[SURFACE]:"__VA_ARGS__) #define DC_LOG_HW_LINK_TRAINING(...) pr_debug("[HW_LINK_TRAINING]:"__VA_ARGS__) .. 9 more .. Thats 11 string prefixes, used in 804 places in drivers/gpu/** Clearly this is a systematized classification of those callsites. And one I'd expect to see repeated often. Using ddebug_exec_queries(), authors can select on those prefixes as a unitary set, equivalent to: echo "module=MODULE_NAME format=^[SURFACE]: +p" >control Trivially, those sets can be subsected with the other query terms too, say file=foo, should the author see fit. Perhaps as important, users can modify the set of enabled callsites, presumably to aid debugging by enabling helpful debug callsites, and disabling those that just clutter the info. Authors could even alter [fmlt] flags, though I dont see a good reason why they would. Perhaps harnessed by bug-logging automation to get fuller, or more minimal bug-reports. DRM drm has both drm.debug, which defines 32 categories of drm_printk logging, and entirely separate uses of pr_debug, which are dynamic on this i915 laptop, running mainline. So I can observe and report on both. The i915 driver has 118 dyndbg callsites, with following "classifications" defined in drivers/gpu/drm/i915/gvt/** $ grep 915 /proc/dynamic_debug/control | cut -d= -f2 | cut -d: -f1,2 | sort -u _ "gvt: cmd _ "gvt: core _ "gvt: dpy _ "gvt: el _ "gvt: irq _ "gvt: mm _ "gvt: mmio _ "gvt: render _ "gvt: sched _ "%s for root hub!\012" _ "Vendor defined info completion code %u\012" This classification is entirely out-of-band for control by drm.debug, and is only available to root user at the console. But module authors can activate them with ddebug_exec_queries(sprintf("format=^%s +p")), and then decide how to expose the groups to the user for max utility. drm.debug drm.debug has 32 bit-flags, and matching enum drm_debug_category values to classify the ~2943 DRM_DEBUG*() callsites in drivers/gpu The drm.debug callback could invoke ddebug_exec_queries() with 32 different hardcoded query strings, needing only (bit) ? " +p" : " -p" added. I briefly enabled drm.debug=0xff on my i915 laptop, which yielded these unique prefixes: (dmesg | cut -c17- | cut -d\] -f1 | sort -u) [drm:drm_atomic_check_only [drm [drm:drm_atomic_get_crtc_state [drm [drm:drm_atomic_get_plane_state [drm [drm:drm_atomic_nonblocking_commit [drm [drm:drm_atomic_set_fb_for_plane [drm [drm:drm_atomic_state_default_clear [drm [drm:__drm_atomic_state_free [drm [drm:drm_atomic_state_init [drm [drm:drm_crtc_vblank_helper_get_vblank_timestamp_internal [drm [drm:drm_handle_vblank [drm [drm:drm_ioctl [drm [drm:drm_mode_addfb2 [drm [drm:drm_mode_object_get [drm [drm:drm_mode_object_put.part.0 [drm [drm:drm_update_vblank_count [drm [drm:drm_vblank_enable [drm [drm:drm_vblank_restore [drm [drm:vblank_disable_fn [drm i915 0000:00:02.0: [drm:gen9_set_dc_state [i915 i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915 i915 0000:00:02.0: [drm:__intel_display_power_get_domain.part.0 [i915 i915 0000:00:02.0: [drm:__intel_display_power_put_domain [i915 i915 0000:00:02.0: [drm:intel_plane_atomic_calc_changes [i915 i915 0000:00:02.0: [drm:skl_enable_dc6 [i915 Several good format=^prefixes are apparent there, and some misses. ^[drm:drm_atomic_ # misses: [drm:__drm_atomic_state_free [drm ^[drm:drm_ioctl ^[drm:drm_mode ^[drm:drm_vblank_ # misses: [drm:drm_update_vblank_count & [drm:vblank_disable_fn Its not a perfect 1:1 single format-match per class, but the misses above can be covered with 1 & 2 additional queries, which can be concatenated together with ";" separators and submitted with 1 call. Benefits: For drm, adapting DRM_DEBUG to use dynamic-debug inside could replicate (and thereby obsolete) lots of bit-checking in current DRM_DEBUG callsites, at least with JUMP_LABEL optimized code. ddebug_exec_queries() and a handful of fixed query-strings can select and thereby control the already classified callsites. With the classes mapped to queries, the enum type and parameter can be eliminated (folded away with macro magic), at least for DYNAMIC_DEBUG & JUMP_LABEL builds. Is it safe ? ddebug_exec_queries() is currently exposed to user space in several limited ways; 1 it is called from module-load callback, where it implements the $modname.dyndbg=+p "fake" parameter provided to all modules. 2 it handles query input via >control directly IOW, it is "fully" exposed to local root user; exposing the same functionality to other kernel modules is no additional risk. The other standard issue to check is locking: dyndbg has a single mutex, taken by ddebug_change to handle >control, and by ddebug_proc_(start|stop) to span `cat control`. Queries submitted via export will typically have module specified, which dramatically cuts the scan by ddebug_change vs "module=* +p". ISTM this proposed export presents no locking problems. TLDR; It would be interesting to see how drm.dyndbg=$QUERY and drm.debug=$HEXY would interact; it might be order dependent, as if given as modprobe args or in /etc/modprobe.d/ Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-19-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: shorten our logging prefix, drop __func__Jim Cromie
For log-message output, reduce column space consumed by current pr_fmt by dropping __func__ and shortening "dynamic_debug" to "dyndbg". This improves readability on narrow consoles, and better matches other kernel boot info messages. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-18-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: allow anchored match on format query termJim Cromie
This should work: echo module=amd* format=^[IF_TRACE]: +p >/proc/dynamic_debug/control consider drivers/gpu/drm/amd/display/include/logger_types.h: It has 11 defines like: #define DC_LOG_IF_TRACE(...) pr_debug("[IF_TRACE]:"__VA_ARGS__) These defines are used 804 times at recent count; they are a good use case to evaluate existing format-message based classifications of *pr_debug*. Those macros prefix the supplied format with a fixed string, I'd expect most existing message classification schemes to do something similar. Hence we want to be able to anchor our match to the beginning of the format string, allowing easy construction of clear and precise queries, leveraging the existing classification scheme to enable and disable those callsites. Note that unlike other search terms, formats are implicitly floating substring matches, without the need for explicit wildcards. This makes no attempt at wider regex features, just the one we need. TLDR: Using the anchor also means the []s are less helpful for disamiguating the prefix from a random in-message occurrence, allowing shorter prefixes. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-17-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: combine flags & mask into a struct, simplify with itJim Cromie
flags & mask are used together everywhere, and are passed around together between multiple functions; they belong together in a struct, call that struct flag_settings. Use struct flag_settings to rework 3 functions: - ddebug_exec_query - declares query and flag-settings, calls other 2, passing flags - ddebug_parse_flags - fills flag_settings and returns - ddebug_change - test all callsites against query, modify passing sites. benefits: - bit-banging always needs flags & mask, best together. - simpler function signatures - 1 less parameter, less stack overhead no functional changes Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-16-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: accept query terms like file=bar and module=fooJim Cromie
Current code expects "keyword" "arg" as 2 words, space separated. Change to also accept "keyword=arg" form as well, and drop !(nwords%2) requirement. Then in rest of function, use new keyword, arg variables instead of word[i], word[i+1] Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-15-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: accept 'file foo.c:func1' and 'file foo.c:10-100'Jim Cromie
Accept these additional query forms: echo "file $filestr +_" > control path/to/file.c:100 # as from control, column 1 path/to/file.c:1-100 # or any legal line-range path/to/file.c:func_A # as from an editor/browser path/to/file.c:drm_* # wildcards still work path/to/file.c:*_foo # lead wildcard too 1st 2 examples are treated as line-ranges, 3-5 are treated as func's Doc these changes, and sprinkle in a few extra wild-card examples and trailing # explanation texts. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-14-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: refactor parse_linerange out of ddebug_parse_queryJim Cromie
Make the code-block reusable to later handle "file foo.c:101-200" etc. This is a 99% code move, with reindent, function wrap&call, +pr_debug. no functional changes. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-13-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: use gcc ?: to reduce word countJim Cromie
reduce word count via gcc ?: extension, no actual code change. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-12-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: make ddebug_tables list LIFO for add/remove_moduleJim Cromie
loadable modules are the last in on this list, and are the only modules that could be removed. ddebug_remove_module() searches from head, but ddebug_add_module() uses list_add_tail(). Change it to list_add() for a micro-optimization. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-11-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: prefer declarative init in caller, to memset in calleeJim Cromie
ddebug_exec_query declares an auto var, and passes it to ddebug_parse_query, which memsets it before using it. Drop that memset, instead initialize the variable in the caller; let the compiler decide how to do it. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-10-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: fix pr_err with empty stringJim Cromie
this pr_err attempts to print the string after the OP, but the string has been parsed and chopped up, so looks empty. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-9-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: fix a BUG_ON in ddebug_describe_flagsJim Cromie
ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead. Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: fix overcounting of ram used by dyndbgJim Cromie
during dyndbg init, verbose logging prints its ram overhead. It counted strlens of struct _ddebug's 4 string members, in all callsite entries, which would be approximately correct if each had been mallocd. But they are pointers into shared .rodata; for example, all 10 kobject callsites have identical filename, module values. Its best not to count that memory at all, since we cannot know they were linked in because of CONFIG_DYNAMIC_DEBUG=y, and we want to report a number that reflects what ram is saved by deconfiguring it. Also fix wording and size under-reporting of the __dyndbg section. Heres my overhead, on a virtme-run VM on a fedora-31 laptop: dynamic_debug:dynamic_debug_init: 260 modules, 2479 entries \ and 10400 bytes in ddebug tables, 138824 bytes in __dyndbg section Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-7-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: rename __verbose section to __dyndbgJim Cromie
dyndbg populates its callsite info into __verbose section, change that to a more specific and descriptive name, __dyndbg. Also, per checkpatch: simplify __attribute(..) to __section(__dyndbg) declaration. and 1 spelling fix, decriptor Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: refine debug verbosity; 1 is basic, 2 more chattyJim Cromie
The verbose/debug logging done for `cat $MNT/dynamic_debug/control` is voluminous (2 per control file entry + 2 per PAGE). Moreover, it just prints pointer and sequence, which is not useful to a dyndbg user. So just drop them. Also require verbose>=2 for several other debug printks that are a bit too chatty for typical needs; ddebug_change() prints changes, once per modified callsite. Since queries like "+p" will enable ~2300 callsites in a typical laptop, a user probably doesn't need to see them often. ddebug_exec_queries() still summarizes with verbose=1. ddebug_(add|remove)_module() also print 1 line per action on a module, not needed by typical modprobe user. This leaves verbose=1 better focussed on the >control parsing process. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-5-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg: drop obsolete comment on ddebug_proc_openJim Cromie
commit 4bad78c55002 ("lib/dynamic_debug.c: use seq_open_private() instead of seq_open()")' The commit was one of a tree-wide set which replaced open-coded boilerplate with a single tail-call. It therefore obsoleted the comment about that boilerplate, clean that up now. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-4-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg-docs: initialization is done early, not archJim Cromie
since cf964976484 in 2012, initialization is done with early_initcall, update the Docs, which still say arch_initcall. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-3-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24dyndbg-docs: eschew file /full/path query in docsJim Cromie
Regarding: commit 2b6783191da7 ("dynamic_debug: add trim_prefix() to provide source-root relative paths") commit a73619a845d5 ("kbuild: use -fmacro-prefix-map to make __FILE__ a relative path") 2nd commit broke dynamic-debug's "file $fullpath" query form, but nobody noticed because 1st commit had trimmed prefixes from control-file output, so the click-copy-pasting of fullpaths into new queries had ceased; that query form became unused. Removing the function is cleanest, but it could be useful in old-compiler corner cases, where __FILE__ still has /full/path, and it safely does nothing otherwize. So instead, quietly deprecate "file /full/path" query form, by removing all /full/paths examples in the docs. I skipped adding a back-compat note. Acked-by: <jbaron@akamai.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-2-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24hwmon: (sparx5) Make symbol 's5_temp_match' staticWei Yongjun
The sparse tool complains as follows: drivers/hwmon/sparx5-temp.c:150:27: warning: symbol 's5_temp_match' was not declared. Should it be static? This variable is not used outside of sparx5-temp.c, this commit marks it static. Fixes: c2cb4b5777e1 ("hwmon: sparx5: Add Sparx5 SoC temperature driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200721134919.34033-1-weiyongjun1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (corsair-cpro) add reading pwm valuesMarius Zachmann
This adds the possibility for reading pwm values. These can not be read if the device is controlled via fan_target or a fan curve and will return an error in this case. Since an error is expected, this adds some rudimentary error handling. Changes: - add CTL_GET_FAN_PWM and use it via get_data - pwm returns -ENODATA if the device returns error 0x12 - fan_target now returns -ENODATA when the driver is started or a pwm value is set. - add ccp_get_errno to determine errno from device error. - get_data now has a parameter to determine whether to read one or two bytes of data. - update documentation - fix missing surname in MAINTAINERS Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: sparx5: Add Sparx5 SoC temperature driverLars Povlsen
This patch adds a temperature sensor driver to the Sparx5 SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200618135951.25441-4-lars.povlsen@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24dt-bindings: hwmon: Add Sparx5 temperature sensorLars Povlsen
This add the DT binding specification for the Sparx5 temperature sensor. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200618135951.25441-2-lars.povlsen@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (tmp401) Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719192544.61247-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (lm95234) Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719191534.61181-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-23 13:47:15 +0000