summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-24Merge tag 'mvebu-dt64-5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.9 (part 1) Add SMMU support for the Marvell AP806 based SoCs (Armada 70xx and Armada 80xx) * tag 'mvebu-dt64-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: add SMMU support
2020-07-24Merge tag 'mvebu-dt-5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.9 (part 1) - Fix the reg-init PHY for the dlink-dns327l (Armada 370) - Replace HTTP links with HTTPS one in device tree of the Excito Bubba B3 (Kirkwood) * tag 'mvebu-dt-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: dlink-dns327l: fix reg-init PHY ARM: dts: kirkwood: Replace HTTP links with HTTPS ones Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24Merge tag 'ti-k3-dt-for-v5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC DT updates for v5.9 - Add platforms chipid nodes for am65x and j721e - Update latest data sheet values for MMC on am65x - Add serdes and usb3 support for j721e - Add analog audio support for j721e - Add SD card support for am65x - Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e - HTTP links replaced with HTTPS ones * tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to msi-controller arm64: dts: ti: k3-j721e-main: rename smmu node to iommu arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones arm64: dts: ti: k3-am654-base-board: Add support for SD card arm64: dts: ti: k3-am65-main: Add support for sdhci1 arm64: dts: ti: j721e-common-proc-board: Analog audio support arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated main_i2c1_exp4_pins_default arm64: dts: ti: k3-am654-main: Update otap-del-sel values arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module node arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node Link: https://lore.kernel.org/r/3b3b9214-769d-ba1b-db5e-44414a8c5756@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24ASoC: qcom: common: Avoid printing errors for -EPROBE_DEFERStephan Gerhold
qcom_snd_parse_of() tends to produce lots of error messages during bootup: MultiMedia1: error getting cpu dai name This happens because the DAIs are not probed until the ADSP remoteproc has booted, which takes a while. Until it is ready, snd_soc_of_get_dai_name() returns -EDEFER_PROBE to retry probing later. This is perfectly normal, so cleanup the kernel log a bit by not printing in case of -EPROBE_DEFER. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-8-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: qcom: apq8016_sbc: Use qcom_snd_parse_of()Stephan Gerhold
Now that we have updated qcom_snd_parse_of() to handle the device tree bindings used for apq8016_sbc, update the apq8016_sbc driver to use the common function and remove the duplicated code. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-7-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: qcom: common: Parse properties with "qcom," prefixStephan Gerhold
The apq8016_sbc device tree binding uses a "qcom," vendor prefix for all device tree properties, while qcom_snd_parse_of() uses the same properties without a prefix. In the future it would be nice to make this consistent, however, for backwards compatibility we need to parse both names to allow apq8016_sbc to use the common qcom_snd_parse_of() function. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-6-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: qcom: common: Support parsing links without DPCMStephan Gerhold
So far qcom_snd_parse_of() was only used to parse the device tree for boards using the QDSP6 driver together with DPCM. apq8016_sbc uses an almost identical version (apq8016_sbc_parse_of()) which parses links without DPCM. Given the similarity of the two functions it is useful to combine these two. To allow using qcom_snd_parse_of() in apq8016_sbc we need to support parsing links without DPCM as well. This is pretty simple: A DPCM link in the device tree is defined using: - DPCM frontend: "cpu" - DPCM backend: "cpu", "platform" and "codec" ... while a link without DPCM has "cpu" and "codec" (but no "platform"). Add a few more if conditions to handle links without DPCM correctly. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-5-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: q6afe: Remove unused q6afe_is_rx_port() functionStephan Gerhold
This reverts commit 4a95737440d ("ASoc: q6afe: add support to get port direction"), since the function is not needed anymore. q6afe-dai already exposes the possible directions for a DAI through the DAI capabilities (playback/capture-only DAI). Now we use snd_soc_dai_link_set_capabilities() to infer the information directly from the DAI capabilities. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-4-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: qcom: common: Use snd_soc_dai_link_set_capabilities()Stephan Gerhold
Commit a2120089251f ("ASoC: qcom: common: set correct directions for dailinks") introduced a call to q6afe_is_rx_port() to set the dpcm_playback/capture parameters correctly. This is necessary because those parameters are now validated to match the capabilities of the DAIs. [1] The disadvantage of introducing the call to q6afe_is_rx_port() is that it makes the qcom_snd_parse_of() helper dependent on the QDSP6 driver. When the ADSP is bypassed (e.g. in apq8016-sbc) QDSP6 is not used. There is a generic solution for this now: The correct direction for the links is already defined by the DAI capabilities (e.g. rx ports only support playback). Commit 25612477d20b ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") introduced the snd_soc_dai_link_set_capabilities() function that we can use to set dpcm_playback/dpcm_capture according to the capabilities of the DAIs. Use that for both FE/BE DAI links to avoid the dependency on the QDSP6 driver. [1]: https://lore.kernel.org/alsa-devel/20200616085409.GA110999@gerhold.net/ Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-3-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24ASoC: qcom: Use devm for resource managementStephan Gerhold
Simplify the machine drivers for newer SoCs a bit by using the devm_* function calls that automatically release the resources when the driver is removed or when probing fails. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200723183904.321040-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-24arm64: dts: amazon: add Amazon's Annapurna Labs Alpine v3 supportRonen Krupnik
This patch adds the initial support for the Amazon's Annapurna Labs Alpine v3 Soc and Evaluation Platform (EVP). Link: https://lore.kernel.org/r/20200724132654.16549-7-hhhawa@amazon.com Signed-off-by: Ronen Krupnik <ronenk@amazon.com> Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24dt-bindings: arm: amazon: add Amazon Annapurna Labs Alpine V3Hanna Hawa
This patch adds DT bindings info for Amazon Annapurna Labs Alpine V3. Link: https://lore.kernel.org/r/20200724132654.16549-6-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24dt-bindings: arm: amazon: add missing alpine-v2 DT bindingHanna Hawa
Amazon Annapurna Labs Alpine family includes: Alpine-v1, Alpine-v2. This patch adds the missing DT binding of Alpine-v2 in amazon,al.yaml. Link: https://lore.kernel.org/r/20200724132654.16549-5-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24dt-bindings: arm: amazon: update maintainers of amazon,al DT bindingsHanna Hawa
Update maintainers of amazon,al DT bindings. Link: https://lore.kernel.org/r/20200724132654.16549-4-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24arm64: dts: amazon: rename al folder to be amazonHanna Hawa
As preparation to add device tree binding for Amazon's Annapurna Labs Alpine v3 support. Rename al device tree folder to be amazon. Link: https://lore.kernel.org/r/20200724132654.16549-3-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24dt-bindings: arm: amazon: rename al,alpine DT binding to amazon,alHanna Hawa
As preparation to add device tree binding for Amazon's Annapurna Labs Alpine v3 support. Rename al,alpine DT binding to amazon,al. Link: https://lore.kernel.org/r/20200724132654.16549-2-hhhawa@amazon.com Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24usb: dwc3: gadget: when the started list is empty stop the active xferMichael Grzeschik
When we have nothing left to be queued after handling the last trb we have to stop the current transfer. This way we can ensure that the next request will be queued with a new and valid timestamp and will not directly run into an missed xfer. Reviewed-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: dwc3: gadget: make starting isoc transfers more robustMichael Olbrich
Currently __dwc3_gadget_start_isoc must be called very shortly after XferNotReady. Otherwise the frame number is outdated and start transfer will fail, even with several retries. DSTS provides the lower 14 bit of the frame number. Use it in combination with the frame number provided by XferNotReady to guess the current frame number. This will succeed unless more than one 14 rollover has happened since XferNotReady. Start transfer might still fail if the frame number is increased immediately after DSTS is read. So retries are still needed. Don't drop the current request if this happens. This way it is not lost and can be used immediately to try again with the next frame number. With this change, __dwc3_gadget_start_isoc is still not successfully in all cases bit it increases the acceptable delay after XferNotReady significantly. Reviewed-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: dwc3: gadget: add frame number maskMichael Grzeschik
This patch adds a define DWC3_FRNUMBER_MASK for the commonly used 0x3fff mask and uses it. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: function: printer: Interface is disabled and returns errorZqiang
After the device is disconnected from the host side, the interface of the device is reset. If the userspace operates the device again, an error code should be returned. Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: f_uac2: fix AC Interface Header Descriptor wTotalLengthRuslan Bilovol
As per UAC2 spec (ch. 4.7.2), wTotalLength of AC Interface Header Descriptor "includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors." Thus add its size to its wTotalLength. Also after recent changes wTotalLength is calculated dynamically, update static definition of uac2_ac_header_descriptor accordingly Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24dt-bindings: usb: ti,keystone-dwc3.yaml: Improve schemaRoger Quadros
There were some review comments after the patch was integrated. Address those. Fixes: 1883a934e156 ("dt-bindings: usb: convert keystone-usb.txt to YAML") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: bdc: Use devm_clk_get_optional()Florian Fainelli
The BDC clock is optional and we may get an -EPROBE_DEFER error code which would not be propagated correctly, fix this by using devm_clk_get_optional(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: bdc: Halt controller on suspendDanesh Petigara
GISB bus error kernel panics have been observed during S2 transition tests on the 7271t platform. The errors are a result of the BDC interrupt handler trying to access BDC register space after the system's suspend callbacks have completed. Adding a suspend hook to the BDC driver that halts the controller before S2 entry thus preventing unwanted access to the BDC register space during this transition. Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: bdc: driver runs out of buffer descriptors on large ADB transfersAl Cooper
Version v1.0.40 of the Android host ADB software increased maximum transfer sizes from 256K to 1M. Since the STB ADB gadget driver requests only 16K at a time, the BDC driver ran out of buffer descriptors (BDs) if the queuing happens faster than the incoming 16K transfers. This issue is fixed by doubling the number of BDs that can be queued so that the entire 1M request can be queued without running out of buffers. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: bdc: Adb shows offline after resuming from S2Al Cooper
On Android systems, After temporarily putting device to S2 by short pressing the power button on the remote, the display turns off. Then press the power button to turn the display back up. Adb devices would show the devices is offline. It needs a physical disconnect of the usb cable or power cycle to bring the device back online. The device is operational otherwise. The problem is that during S2 resume, the ADB gadget driver could not link back with the BDC driver because the endpoint flags were cleared. The fix is to clear the endpoint flags for the disconnect case only and not for S2 exit. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24bdc: Fix bug causing crash after multiple disconnectsSasi Kumar
Multiple connects/disconnects can cause a crash on the second disconnect. The driver had a problem where it would try to send endpoint commands after it was disconnected which is not allowed by the hardware. The fix is to only allow the endpoint commands when the endpoint is connected. This will also fix issues that showed up when using configfs to create gadgets. Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: bdc: Add compatible string for new style USB DT nodesAl Cooper
Add compatible string for some newer boards that only have this as their match sting. Remove unused compatible string "brcm,bdc-v0.16". Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24dt-bindings: usb: bdc: Update compatible stringsAl Cooper
Remove "brcm,bdc-v0.16" because it was never used on any system. Add "brcm,bdc-udc-v2" which exists for any STB system with BDC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24USB: PHY: JZ4770: Reformat the code to align it.周琰杰 (Zhou Yanjie)
Reformat the code (add one level of indentation before the values), to align the code in the macro definition section. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24USB: PHY: JZ4770: Add support for new Ingenic SoCs.周琰杰 (Zhou Yanjie)
Add support for probing the phy-jz4770 driver on the JZ4780 SoC, the X1000 SoC and the X1830 SoC from Ingenic. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24USB: PHY: JZ4770: Unify code style and simplify code.周琰杰 (Zhou Yanjie)
1.Modify the macro definition to unify "#define USBPCR_XXXX n" into the "#define USBPCR_XXXX (n << USBPCR_XXXX_LSB)" style, so as to unify the code style in the "jz4770_phy_init()" and simplify the code. 2.Remove unused macro definitions to simplify the code. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Suggested-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24dt-bindings: USB: Add bindings for new Ingenic SoCs.周琰杰 (Zhou Yanjie)
Add the USB PHY bindings for the JZ4780 SoC, the X1000 SoC and the X1830 SoC from Ingenic. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: net2280: fix memory leak on probe error handling pathsEvgeny Novikov
Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet. The patch fixes the bug like in other similar drivers. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: drd: simplify *switch_gadet and *switch_hostPawel Laszczak
Patch split function cdns3_drd_switch_gadget and cdns3_drd_switch_host into: - cdns3_drd_host_on - cdns3_drd_host_off - cdns3_drd_gadget_on - cdns3_drd_gadgett_off These functions don't have any shared code so it's better to have smaller, faster and easier functions. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: core: removed overwriting some error codePawel Laszczak
Some error code can be preserved, so we can remove overwriting error code returned by some functions. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: core: removed 'goto not_otg'Pawel Laszczak
Patch removes 'goto not_otg' instruction from cdns3_hw_role_state_machine function. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: Added CDNS3_ID_PERIPHERAL and CDNS3_ID_HOSTPawel Laszczak
Patch adds 2 definitions that make it easier to understand the code. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: drd: changed return type from int to boolPawel Laszczak
Patch changes return type from int to bool for cdns3_is_host and cdns3_is_device functions. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: drd: return IRQ_NONE explicitly.Pawel Laszczak
IRQ_NONE can be returned indirect. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cnds3: drd: deleted !=Pawel Laszczak
Patch deletes unnecessary != from condition statement in cdns3_drd_init function. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: drd: removed not needed variables initializationPawel Laszczak
Patch remove some variables initialization from core.c and drd.c file. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: core: removed cdns3_get_current_role_driver functionPawel Laszczak
Function is not used in driver so it can be removed. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: gadget: always zeroed TRB buffer when enable endpointPeter Chen
During the endpoint dequeue operation, it changes dequeued TRB as link TRB, when the endpoint is disabled and re-enabled, the DMA fetches the TRB before the link TRB, after it handles current TRB, the DMA pointer will advance to the TRB after link TRB, but enqueue and dequene variables don't know it due to no hardware interrupt at the time, when the next TRB is added to link TRB position, the DMA will not handle this TRB due to its pointer is already at the next TRB. See the trace log like below: file-storage-675 [001] d..1 86.585657: usb_ep_queue: ep0: req 00000000df9b3a4f length 0/0 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 86.585663: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 file-storage-675 [001] d..1 86.585671: cdns3_prepare_trb: ep1out: trb 000000007f770303, dma buf: 0xbd195800, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 86.585676: cdns3_ring: Ring contents for ep1out: Ring deq index: 0, trb: 000000007f770303 (virt), 0xc4003000 (dma) Ring enq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 80020400 00000425 @0x00000000c400300c c4003018 80020400 00001811 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... irq/144-5b13000-698 [000] d... 87.619286: usb_gadget_giveback_request: ep1in: req 0000000031b832eb length 13/13 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 87.619287: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr 0x80020400c400300c], flags:0 SID: 0 file-storage-675 [001] d..1 87.619294: cdns3_prepare_trb: ep1out: trb 0000000049c1ba21, dma buf: 0xbd198000, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 87.619297: cdns3_ring: Ring contents for ep1out: Ring deq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) Ring enq index: 2, trb: 0000000059b34b67 (virt), 0xc4003018 (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 0000001f 00000427 @0x00000000c400300c bd198000 80020400 00000425 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... file-storage-675 [001] d..1 87.619305: cdns3_doorbell_epx: ep1out, ep_trbaddr c4003018 file-storage-675 [001] .... 87.619308: usb_ep_queue: ep1out: req 000000002ebce364 length 0/1024 sgs 0/0 stream 0 zsI status -115 --> 0 irq/144-5b13000-698 [000] d..1 87.619315: cdns3_epx_irq: IRQ for ep1out: 01000c80 TRBERR , ep_traddr: c4003018 ep_last_sid: 00000000 use_streams: 0 irq/144-5b13000-698 [000] d..1 87.619395: cdns3_usb_irq: IRQ 00000008 = Hot Reset Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: ep0: delete the unnecessary operationPeter Chen
It doesn't need to enable/disable L1 on the fly for EP0 transfer, we only need to enable L1 after SET_CONFIGURATION. This code may be introduced by careless. Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: net2272: skip BAR1 on error handling paths in probeEvgeny Novikov
net2272_rdk1_probe() skips "i == 1" (BAR1) during allocation of resources. The patch does this on error hanling paths as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: bdc: use readl_poll_timeout() to simplify codeChunfeng Yun
Use readl_poll_timeout() to poll register status Cc: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: dwc2: Fix error path in gadget registrationMarek Szyprowski
When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: udc: atmel: implement .pullup callbackMichał Mirosław
Implement udc->pullup callback, so that udc_connect/disconnect work. This is needed for composite gadget, as it assumes udc_disconnect() actually works and calls its ->disconnect callback. Acked-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: gadget: udc: Flush pending work also in error pathMarek Szyprowski
When binding an UDC driver to the pending gadget fails in check_pending_gadget_drivers(), the usb_add_gadget_udc_release() function ends without waiting for the usb_gadget_state_work to finish, what in turn might cause the whole struct usb_gadget being freed by the caller before the usb_gadget_state_work being executed. This can be observed on some boards with USB Mass Storage gadget compiled-in and kernel booted without the needed module parameters: dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 dwc2: probe of 12480000.hsotg failed with error -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = (ptrval) [00000004] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 88 Comm: kworker/1:2 Not tainted 5.8.0-rc5-next-20200715-00062-gc5bb489ae825-dirty #8792 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: 0x0 (rcu_gp) PC is at process_one_work+0x44/0x7dc ... Process kworker/1:2 (pid: 88, stack limit = 0x(ptrval)) Stack: (0xed9f1f00 to 0xed9f2000) ... [<c0148590>] (process_one_work) from [<c0148d6c>] (worker_thread+0x44/0x51c) [<c0148d6c>] (worker_thread) from [<c01500c0>] (kthread+0x158/0x1a0) [<c01500c0>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xed9f1fb0 to 0xed9f1ff8) ... ---[ end trace 5033c1326a62e5f3 ]--- note: kworker/1:2[88] exited with preempt_count 1 Fix this by flushing pending work in error path. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 05:30:01 +0000