| Age | Commit message (Collapse) | Author |
|---|
|
The compiler will add padding after the last member, make that explicit.
The size of a request is always 24 bytes. The size of a response always
10 bytes. Add compile-time checks.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200515101402.16597-1-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Right now, we always try to unplug single subblocks when processing an
online memory block. Let's try to unplug the complete online memory block
first, in case it is fully plugged and the unplug request is large
enough. Fallback to single subblocks in case the memory block cannot get
unplugged as a whole.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-16-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's be able to distinguish if the device or if memory is busy.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-15-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We unplug blocks right-to-left, let's also unplug subblocks within a block
right-to-left.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-14-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Registering our parent resource will fail if any memory is still present
(e.g., because somebody unloaded the driver and tries to reload it). No
need for the manual check.
Move our "unplug all" handling to after registering the resource.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-13-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's add a parent resource, named after the virtio device (inspired by
drivers/dax/kmem.c). This allows user space to identify which memory
belongs to which virtio-mem device.
With this change and two virtio-mem devices:
:/# cat /proc/iomem
00000000-00000fff : Reserved
00001000-0009fbff : System RAM
[...]
140000000-333ffffff : virtio0
140000000-147ffffff : System RAM
148000000-14fffffff : System RAM
150000000-157ffffff : System RAM
[...]
334000000-3033ffffff : virtio1
338000000-33fffffff : System RAM
340000000-347ffffff : System RAM
348000000-34fffffff : System RAM
[...]
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-12-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
|
|
Let's start with a retry interval of 5 seconds and double the time until
we reach 5 minutes, in case we keep getting errors. Reset the retry
interval in case we succeeded.
The two main reasons for having to retry are
- The hypervisor is busy and cannot process our request
- We cannot reach the desired requested_size (esp., not enough memory can
get unplugged because we can't allocate any subblocks).
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-11-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's offline+remove memory blocks once all subblocks are unplugged. We
can use the new Linux MM interface for that. As no memory is in use
anymore, this shouldn't take a long time and shouldn't fail. There might
be corner cases where the offlining could still fail (especially, if
another notifier NACKs the offlining request).
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-10-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio-mem wants to offline and remove a memory block once it unplugged
all subblocks (e.g., using alloc_contig_range()). Let's provide
an interface to do that from a driver. virtio-mem already supports to
offline partially unplugged memory blocks. Offlining a fully unplugged
memory block will not require to migrate any pages. All unplugged
subblocks are PageOffline() and have a reference count of 0 - so
offlining code will simply skip them.
All we need is an interface to offline and remove the memory from kernel
module context, where we don't have access to the memory block devices
(esp. find_memory_block() and device_offline()) and the device hotplug
lock.
To keep things simple, allow to only work on a single memory block.
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-9-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Dropping the reference count of PageOffline() pages during MEM_GOING_ONLINE
allows offlining code to skip them. However, we also have to clear
PG_reserved, because PG_reserved pages get detected as unmovable right
away. Take care of restoring the reference count when offlining is
canceled.
Clarify why we don't have to perform any action when unloading the
driver. Also, let's add a warning if anybody is still holding a
reference to unplugged pages when offlining.
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-8-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio-mem wants to allow to offline memory blocks of which some parts
were unplugged (allocated via alloc_contig_range()), especially, to later
offline and remove completely unplugged memory blocks. The important part
is that PageOffline() has to remain set until the section is offline, so
these pages will never get accessed (e.g., when dumping). The pages should
not be handed back to the buddy (which would require clearing PageOffline()
and result in issues if offlining fails and the pages are suddenly in the
buddy).
Let's allow to do that by allowing to isolate any PageOffline() page
when offlining. This way, we can reach the memory hotplug notifier
MEM_GOING_OFFLINE, where the driver can signal that he is fine with
offlining this page by dropping its reference count. PageOffline() pages
with a reference count of 0 can then be skipped when offlining the
pages (like if they were free, however they are not in the buddy).
Anybody who uses PageOffline() pages and does not agree to offline them
(e.g., Hyper-V balloon, XEN balloon, VMWare balloon for 2MB pages) will not
decrement the reference count and make offlining fail when trying to
migrate such an unmovable page. So there should be no observable change.
Same applies to balloon compaction users (movable PageOffline() pages), the
pages will simply be migrated.
Note 1: If offlining fails, a driver has to increment the reference
count again in MEM_CANCEL_OFFLINE.
Note 2: A driver that makes use of this has to be aware that re-onlining
the memory block has to be handled by hooking into onlining code
(online_page_callback_t), resetting the page PageOffline() and
not giving them to the buddy.
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-7-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Unplugging subblocks of memory blocks that are offline is easy. All we
have to do is watch out for concurrent onlining activity.
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-5-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We want to allow to specify (similar as for a DIMM), to which node a
virtio-mem device (and, therefore, its memory) belongs. Add a new
virtio-mem feature flag and export pxm_to_node, so it can be used in kernel
module context.
Acked-by: Michal Hocko <mhocko@suse.com> # for the export
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> # for the export
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-4-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's make sure patches/bug reports find the right person.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix below warnings reported by coccicheck:
drivers/vdpa/vdpa_sim/vdpa_sim.c:104:1-10: WARNING: Assignment of 0/1 to bool variable
drivers/vdpa/vdpa_sim/vdpa_sim.c:164:7-11: WARNING: Unsigned expression compared with zero: read <= 0
drivers/vdpa/vdpa_sim/vdpa_sim.c:169:7-12: WARNING: Unsigned expression compared with zero: write <= 0
1. The 'ready' variable in vdpasim_virtqueue struct is bool type.
It is better to initialize vq->ready to false
2. Modify 'read' and 'write' variables type from size_t to ssize_t.
And preserve the reverse christmas tree ordering of local variables.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588990802-28451-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit move IRQ request and free operations from probe()
to VIRTIO status change handler to comply with VIRTIO spec.
VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field
The device MUST NOT consume buffers or send any used buffer
notifications to the driver before DRIVER_OK.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/1589270444-3669-1-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Even the compiler is able to figure out that in this case the
initialisation is superfluous.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200527180541.5570-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.
For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.
SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
(pp: plaintext cc:ciphertext)
Fix this issue by limit the length of dest buffer.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.
In crypto_authenc_init_tfm(), the reqsize is set to:
[PART 1] sizeof(authenc_request_ctx) +
[PART 2] ictx->reqoff +
[PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.
When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.
However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.
The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
__virtio_crypto_skcipher_do_req()
The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).
Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
enabled
We should disable free page reporting if page poisoning is enabled but we
cannot report it via the balloon interface. This way we can avoid the
possibility of corrupting guest memory. Normally the page poisoning feature
should always be present when free page reporting is enabled on the
hypervisor, however this allows us to correctly handle a case of the
virtio-balloon device being possibly misconfigured.
Fixes: 5d757c8d518d ("virtio-balloon: add support for providing free page reports to host")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200508173732.17877.85060.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There could be ways to support doorbell mapping with !MMU, but things
like pgprot_noncached are not universally supported.
Fixable, but just disable this for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the doorbell is relayed via eventfd which may have
significant overhead because of the cost of vmexits or syscall. This
patch introduces mmap() based doorbell mapping which can eliminate the
overhead caused by vmexit or syscall.
To ease the userspace modeling of the doorbell layout (usually
virtio-pci), this patch starts from a doorbell per page
model. Vhost-vdpa only support the hardware doorbell that sit at the
boundary of a page and does not share the page with other registers.
Doorbell of each virtqueue must be mapped separately, pgoff is the
index of the virtqueue. This allows userspace to map a subset of the
doorbell which may be useful for the implementation of software
assisted virtqueue (control vq) in the future.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch introduces a new method in the vdpa_config_ops which
reports the physical address and the size of the doorbell for a
specific virtqueue.
This will be used by the future patches that maps doorbell to
userspace.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For the device that doesn't use vhost worker and use_mm(), mmget() is
too heavy weight and it may brings troubles for implementing mmap()
support for vDPA device.
This is because, an reference to the address space was held via
mm_get() in vhost_dev_set_owner() and an reference to the file was
held in mmap(). This means when process exits, the mm can not be
released thus we can not release the file.
This patch tries to use mmgrab() instead of mmget(), which allows the
address space to be destroy in process exit without releasing the mm
structure itself. This is sufficient for vDPA device which pin user
pages and does not depend on the address space to work.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vDPA device currently relays the eventfd via vhost worker. This is
inefficient due the latency of wakeup and scheduling, so this patch
tries to introduce a use_worker attribute for the vhost device. When
use_worker is not set with vhost_dev_init(), vhost won't try to
allocate a worker thread and the vhost_poll will be processed directly
in the wakeup function.
This help for vDPA since it reduces the latency caused by vhost worker.
In my testing, it saves 0.2 ms in pings between VMs on a mutual host.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To 2.27
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
first steps in trying to make channels properly reconnect.
* add cifs_ses_find_chan() function to find the enclosing cifs_chan
struct it belongs to
* while we have the session lock and are redoing negprot and
sess.setup in smb2_reconnect() redo the binding of channels.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a cifs_chan pointer in struct cifs_ses that points to the channel
currently being bound if ses->binding is true.
Previously it was always the channel past the established count.
This will make reconnecting (and rebinding) a channel easier later on.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove static checker warning pointed out by Dan Carpenter:
The patch feeaec621c09: "cifs: multichannel: move channel selection
above transport layer" from Apr 24, 2020, leads to the following
static checker warning:
fs/cifs/smb2pdu.c:149 smb2_hdr_assemble()
error: we previously assumed 'tcon->ses' could be null (see line 133)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Aurelien Aptel <aptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:
- credit handling is done with the server that will actually be used
to send.
* ->wait_mtu_credit
* ->set_credits / set_credits
* ->add_credits / add_credits
* add_credits_and_wake_if
- potential reconnection (smb2_reconnect) done when initializing a
request is checked and done with the server that will actually be
used to send.
To do this:
- remove the cifs_pick_channel() call out of compound_send_recv()
- select channel and pass it down by adding a cifs_pick_channel(ses)
call in:
- smb311_posix_mkdir
- SMB2_open
- SMB2_ioctl
- __SMB2_close
- query_info
- SMB2_change_notify
- SMB2_flush
- smb2_async_readv (if none provided in context param)
- SMB2_read (if none provided in context param)
- smb2_async_writev (if none provided in context param)
- SMB2_write (if none provided in context param)
- SMB2_query_directory
- send_set_info
- SMB2_oplock_break
- SMB311_posix_qfs_info
- SMB2_QFS_info
- SMB2_QFS_attr
- smb2_lockv
- SMB2_lease_break
- smb2_compound_op
- smb2_set_ea
- smb2_ioctl_query_info
- smb2_query_dir_first
- smb2_query_info_comound
- smb2_query_symlink
- cifs_writepages
- cifs_write_from_iter
- cifs_send_async_read
- cifs_read
- cifs_readpages
- add TCP_Server_Info *server param argument to:
- cifs_send_recv
- compound_send_recv
- SMB2_open_init
- SMB2_query_info_init
- SMB2_set_info_init
- SMB2_close_init
- SMB2_ioctl_init
- smb2_iotcl_req_init
- SMB2_query_directory_init
- SMB2_notify_init
- SMB2_flush_init
- build_qfs_info_req
- smb2_hdr_assemble
- smb2_reconnect
- fill_small_buf
- smb2_plain_req_init
- __smb2_plain_req_init
The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:
- cifs_writepages (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages (rdata)
- cifs_send_async_read (rdata)
The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.
Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.
- SMB2_negotiate (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo (uses provided one)
- SMB2_logoff (uses master)
- SMB2_tdis (uses master)
(list not exhaustive)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2_read/SMB2_write check and use cifs_io_parms->server, which might
be uninitialized memory.
This change makes all callers zero-initialize the struct.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently the end user is unaware with what sec type the
cifs share is mounted if no sec=<type> option is parsed.
With this patch one can easily check from DebugData.
Example:
1) Name: x.x.x.x Uses: 1 Capability: 0x8001f3fc Session Status: 1 Security type: RawNTLMSSP
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
|
|
In case a compressed file is getting overwritten, the current retry
logic doesn't include the current page to be retried now as it sets
the new start index as 0 and new end index as writeback_index - 1.
This causes the corresponding cluster to be uncompressed and written
as normal pages without compression. Fix this by allowing writeback to
be retried for the current page as well (in case of compressed page
getting retried due to index mismatch with cluster index). So that
this cluster can be written compressed in case of overwrite.
Also, align f2fs_write_cache_pages() according to the change -
<64081362e8ff>("mm/page-writeback.c: fix range_cyclic writeback vs
writepages deadlock").
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- hid-mcp2221 GPIO support, from Rishi Gupta
- MT_CLS_WIN_8_DUAL obsolete quirk removal from hid-multitouch, from
Kai-Heng Feng
- a bunch of new hardware support to hid-asus driver, from Hans de
Goede
- other assorted small fixes, cleanups and device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Remove MT_CLS_WIN_8_DUAL
HID: multitouch: enable multi-input as a quirk for some devices
HID: sony: Fix for broken buttons on DS3 USB dongles
HID: Add quirks for Trust Panora Graphic Tablet
HID: apple: Swap the Fn and Left Control keys on Apple keyboards
HID: asus: Add depends on USB_HID to HID_ASUS Kconfig option
HID: asus: Fix mute and touchpad-toggle keys on Medion Akoya E1239T
HID: asus: Add support for multi-touch touchpad on Medion Akoya E1239T
HID: asus: Add report_size to struct asus_touchpad_info
HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check
HID: asus: Simplify skipping of mappings for Asus T100CHI keyboard-dock
HID: asus: Only set EV_REP if we are adding a mapping
HID: i2c-hid: add Schneider SCL142ALM to descriptor override
HID: intel-ish-hid: avoid bogus uninitialized-variable warning
HID: mcp2221: add GPIO functionality support
HID: fix typo in Kconfig
HID: logitech: drop outdated references to unifying receivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was another busy development cycle, and the majority of changes are
found in ASoC side. Below are Some highlights.
ASoC core:
- Lots of core cleanups and refactorings, still on-going work by
Morimoto-san
ASoC drivers:
- Continued work on cleaning up and improving the Intel SOF stuff,
along with new platform support including SoundWire
- Fixes to make the Marvell SSPA driver work upstream
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
USB-audio:
- Improvement for sync and implicit feedback streams with the more
accurate frame size calculation and full-duplex support
- Support for RME Babyface Pro and Prioneer DJ DJM
HD-audio:
- Fixes for Mic mute LED on HP machines
- Re-enable support of Intel SST driver for SKL/KBL platforms
FireWire:
- Lots of refactoring, add support for RME FireFace and MOTU
UltraLite-mk3"
* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
ALSA: es1688: Add the missed snd_card_free()
ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
ASoC: qcom: q6asm-dai: kCFI fix
ASoC: soc-card: add snd_soc_card_remove_dai_link()
ASoC: soc-card: add snd_soc_card_add_dai_link()
ASoC: soc-card: add snd_soc_card_set_bias_level_post()
ASoC: soc-card: add snd_soc_card_set_bias_level()
ASoC: soc-card: add snd_soc_card_remove()
ASoC: soc-card: add snd_soc_card_late_probe()
ASoC: soc-card: add snd_soc_card_probe()
ASoC: soc-card: add probed bit field to snd_soc_card
ASoC: soc-card: add snd_soc_card_resume_post()
ASoC: soc-card: add snd_soc_card_resume_pre()
ASoC: soc-card: add snd_soc_card_suspend_post()
ASoC: soc-card: add snd_soc_card_suspend_pre()
ASoC: soc-card: move snd_soc_card_subclass to soc-card
ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia updates from Dominik Brodowski:
"Two minor PCMCIA odd fixes: one replacing zero-length arrays with a
flexible-array member, and one making a local function static"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: make pccard_loop_tuple() static
pcmcia: Replace zero-length array with flexible-array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"New drivers: aw2013, sgm3140, some fixes
Nothing much to see here, next release should be more interesting"
* tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: add aw2013 driver
dt-bindings: leds: Add binding for aw2013
leds: trigger: remove redundant assignment to variable ret
leds: netxbig: Convert to use GPIO descriptors
leds: add sgm3140 driver
dt-bindings: leds: Add binding for sgm3140
leds: ariel: Add driver for status LEDs on Dell Wyse 3020
leds: pwm: check result of led_pwm_set() in led_pwm_add()
leds: tlc591xxt: hide error on EPROBE_DEFER
leds: tca6507: Include the right header
leds: lt3593: Drop surplus include
leds: lp3952: Include the right header
leds: lm355x: Drop surplus include
|
|
- Fix vmd resource address calculation using Host Physical Address shadow
register (Jon Derrick)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Filter resource type bits from shadow register
|
|
- Fix memory leak in probe error paths (Christophe JAILLET)
* remotes/lorenzo/pci/v3-semi:
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
|
|
- Fix error message for failure to get reset GPIO from DT (Pali Rohár)
- Fix runtime PM imbalance on error path (both tegra and tegra194)
(Dinghao Liu)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Fix runtime PM imbalance on error
PCI: tegra194: Fix runtime PM imbalance on error
PCI: tegra: Fix reporting GPIO error value
|
|
- Fix rcar OB window programming (Andrew Murray)
- Add rcar suspend/resume support (Kazufumi Ikeda)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
- Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode
(Lad Prabhakar)
- Move shareable code to pcie-rcar.c (Lad Prabhakar)
- Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar)
- Add endpoint support for multiple outbound memory windows (Lad
Prabhakar)
- Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar)
* remotes/lorenzo/pci/rcar:
MAINTAINERS: Add file patterns for rcar PCI device tree bindings
PCI: rcar: Add endpoint mode support
dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
PCI: endpoint: Add support to handle multiple base for mapping outbound memory
PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
PCI: rcar: Fix calculating mask for PCIEPAMR register
PCI: rcar: Move shareable code to a common file
PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
dt-bindings: pci: rcar: add r8a77961 support
PCI: rcar: Add suspend/resume
PCI: rcar: Fix incorrect programming of OB windows
|
|
- Fix conflicts in pci-bridge-emul descriptions of Device Status and Slot
Control (Jon Derrick)
- Add emulation for more Device Status, Link Control, and Slot Control
bits (Jon Derrick)
- Improve emulation of reserved bits (Jon Derrick)
* remotes/lorenzo/pci/pci-bridge-emul:
PCI: pci-bridge-emul: Eliminate the 'reserved' member
PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0
PCI: pci-bridge-emul: Fix Root Cap/Status comment
PCI: pci-bridge-emul: Fix PCIe bit conflicts
|
|
- Correct MAINTAINERS typo for NXP LAYERSCAPE GEN4 (Lukas Bulwahn)
- Make PCI endpoint doc section labels unique (Bryce Willey)
* remotes/lorenzo/pci/misc:
Documentation: PCI: Give unique labels to sections
MAINTAINERS: correct typo in new NXP LAYERSCAPE GEN4
|
|
- Release resource in probe failure path (Wei Hu)
- Retry PCI bus D0 entry if device state is invalid (Wei Hu)
- Use struct_size() to help avoid type mistakes (Gustavo A. R. Silva)
* remotes/lorenzo/pci/hv:
PCI: hv: Use struct_size() helper
PCI: hv: Retry PCI bus D0 entry on invalid device state
PCI: hv: Fix the PCI HyperV probe failure path to release resource properly
|
|
- Constify struct pci_ecam_ops (Rob Herring)
- Support building as modules (Rob Herring)
- Eliminate wrappers for pci_host_common_probe() by using DT match table
data (Rob Herring)
* remotes/lorenzo/pci/host-generic:
PCI: host-generic: Eliminate pci_host_common_probe wrappers
PCI: host-generic: Support building as modules
PCI: Constify struct pci_ecam_ops
# Conflicts:
# drivers/pci/controller/dwc/pcie-hisi.c
|
|
- Avoid NULL pointer dereference in dma_release_channel() (Kunihiko
Hayashi)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: functions/pci-epf-test: Fix DMA channel release
|
