summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-04Merge tag 'amd-drm-fixes-5.9-2020-09-03' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-03: amdgpu: - Fix for 32bit systems - SW CTF fix - Update for Sienna Cichlid - CIK bug fixes radeon: - PLL fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903050022.3960-1-alexander.deucher@amd.com
2020-09-03Merge branch 'smc-fixes'David S. Miller
Karsten Graul says: ==================== net/smc: fixes 2020-09-03 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes the toleration of older SMC implementations. Patch 2 takes care of a problem that happens when SMCR is used after SMCD initialization failed. Patch 3 fixes a problem with freed send buffers, and patch 4 corrects refcounting when SMC terminates due to device removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: fix sock refcounting in case of terminationUrsula Braun
When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: reset sndbuf_desc if freedUrsula Braun
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: set rx_off for SMCR explicitlyUrsula Braun
SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net/smc: fix toleration of fake add_link messagesKarsten Graul
Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04interconnect: qcom: Fix small BW votes being truncated to zeroMike Tipton
Small BW votes that translate to less than a single BCM unit are currently truncated to zero. Ensure that non-zero BW requests always result in at least a vote of 1 to BCM. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03drm/tve200: Stabilize enable/disableLinus Walleij
The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
2020-09-03perf tools: Add bpf image check to __map__is_kmoduleJiri Olsa
When validating kcore modules the do_validate_kcore_modules function checks on every kernel module dso against modules record. The __map__is_kmodule check is used to get only kernel module dso objects through. Currently the bpf images are slipping through the check and making the validation to fail, so report falls back from kcore usage to kallsyms. Adding __map__is_bpf_image check for bpf image and adding it to __map__is_kmodule check. Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03perf record/stat: Explicitly call out event modifiers in the documentationKim Phillips
Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03perf bench: The do_run_multi_threaded() function must use ↵YueHaibing
IS_ERR(perf_session__new()) In case of error, the function perf_session__new() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR() Committer notes: This wasn't compiling due to an extraneous '{' not matched by a '}', fix it. Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03perf stat: Turn off summary for interval mode by defaultJin Yao
There's a risk that outputting interval mode summaries by default breaks CSV consumers. It already broke pmu-tools/toplev. So now we turn off the summary by default but we create a new option '--summary' to enable the summary. This is active even when not using CSV mode. Before: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized 1.000265904 601 context-switches # 0.075 K/sec 1.000265904 10 cpu-migrations # 0.001 K/sec 1.000265904 0 page-faults # 0.000 K/sec 1.000265904 66,746,521 cycles # 0.008 GHz 1.000265904 71,874,398 instructions # 1.08 insn per cycle 1.000265904 13,356,781 branches # 1.668 M/sec 1.000265904 298,756 branch-misses # 2.24% of all branches 2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized 2.001857667 164 context-switches # 0.020 K/sec 2.001857667 10 cpu-migrations # 0.001 K/sec 2.001857667 2 page-faults # 0.000 K/sec 2.001857667 5,822,188 cycles # 0.001 GHz 2.001857667 2,186,170 instructions # 0.38 insn per cycle 2.001857667 442,378 branches # 0.055 M/sec 2.001857667 44,750 branch-misses # 10.12% of all branches Performance counter stats for 'system wide': 16,018.25 msec cpu-clock # 7.993 CPUs utilized 765 context-switches # 0.048 K/sec 20 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 72,568,709 cycles # 0.005 GHz 74,060,568 instructions # 1.02 insn per cycle 13,799,159 branches # 0.861 M/sec 343,506 branch-misses # 2.49% of all branches 2.004118489 seconds time elapsed After: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized 1.001336393 82 context-switches # 0.010 K/sec 1.001336393 8 cpu-migrations # 0.001 K/sec 1.001336393 0 page-faults # 0.000 K/sec 1.001336393 4,199,121 cycles # 0.001 GHz 1.001336393 1,373,991 instructions # 0.33 insn per cycle 1.001336393 270,681 branches # 0.034 M/sec 1.001336393 31,659 branch-misses # 11.70% of all branches 2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized 2.003905006 184 context-switches # 0.023 K/sec 2.003905006 8 cpu-migrations # 0.001 K/sec 2.003905006 2 page-faults # 0.000 K/sec 2.003905006 5,446,190 cycles # 0.001 GHz 2.003905006 2,312,547 instructions # 0.42 insn per cycle 2.003905006 451,691 branches # 0.056 M/sec 2.003905006 37,925 branch-misses # 8.40% of all branches root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary # time counts unit events 1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized 1.001313128 83 context-switches # 0.010 K/sec 1.001313128 8 cpu-migrations # 0.001 K/sec 1.001313128 0 page-faults # 0.000 K/sec 1.001313128 4,470,950 cycles # 0.001 GHz 1.001313128 1,440,045 instructions # 0.32 insn per cycle 1.001313128 283,222 branches # 0.035 M/sec 1.001313128 33,576 branch-misses # 11.86% of all branches 2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized 2.003857385 154 context-switches # 0.019 K/sec 2.003857385 8 cpu-migrations # 0.001 K/sec 2.003857385 2 page-faults # 0.000 K/sec 2.003857385 4,515,676 cycles # 0.001 GHz 2.003857385 2,180,449 instructions # 0.48 insn per cycle 2.003857385 435,254 branches # 0.054 M/sec 2.003857385 31,179 branch-misses # 7.16% of all branches Performance counter stats for 'system wide': 16,033.53 msec cpu-clock # 7.992 CPUs utilized 237 context-switches # 0.015 K/sec 16 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 8,986,626 cycles # 0.001 GHz 3,620,494 instructions # 0.40 insn per cycle 718,476 branches # 0.045 M/sec 64,755 branch-misses # 9.01% of all branches 2.006124542 seconds time elapsed Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03libtraceevent: Fix build warning on 32-bit archesTzvetomir Stoyanov (VMware)
Fixed a compilation warning for casting to pointer from integer of different size on 32-bit platforms. Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03perf jevents: Fix suspicious code in fixregex()Namhyung Kim
The new string should have enough space for the original string and the back slashes IMHO. Fixes: fbc2844e84038ce3 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03perf parse-events: Use uintptr_t when casting numbers to pointersArnaldo Carvalho de Melo
To address these errors found when cross building from x86_64 to MIPS little endian 32-bit: CC /tmp/build/perf/util/parse-events-bison.o util/parse-events.y: In function 'parse_events_parse': util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 514 | (void *) $2, $6, $4); | ^ util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 531 | (void *) $2, NULL, $4)) { | ^ util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 547 | (void *) $2, $4, 0); | ^ util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 564 | (void *) $2, NULL, 0)) { | ^ Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03dax: fix detection of dax support for non-persistent memory block devicesColy Li
When calling __generic_fsdax_supported(), a dax-unsupported device may not have dax_dev as NULL, e.g. the dax related code block is not enabled by Kconfig. Therefore in __generic_fsdax_supported(), to check whether a device supports DAX or not, the following order of operations should be performed: - If dax_dev pointer is NULL, it means the device driver explicitly announce it doesn't support DAX. Then it is OK to directly return false from __generic_fsdax_supported(). - If dax_dev pointer is NOT NULL, it might be because the driver doesn't support DAX and not explicitly initialize related data structure. Then bdev_dax_supported() should be called for further check. If device driver desn't explicitly set its dax_dev pointer to NULL, this is not a bug. Calling bdev_dax_supported() makes sure they can be recognized as dax-unsupported eventually. Fixes: c2affe920b0e ("dax: do not print error message for non-persistent memory block device") Cc: Jan Kara <jack@suse.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Reviewed-and-tested-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20200903161625.19524-1-colyli@suse.de
2020-09-03doc: net: dsa: Fix typo in config code samplePaul Barker
In the "single port" example code for configuring a DSA switch without tagging support from userspace the command to bring up the "lan2" link was typo'd. Signed-off-by: Paul Barker <pbarker@konsulko.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03Merge tag 'fixes-2020-09-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull misc build failure fixes from Mike Rapoport: "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze. Some configurations of ia64 and microblaze use min_low_pfn and max_low_pfn in pfn_valid(). This causes build failures for modules that use pfn_valid(). The fix is to add EXPORT_SYMBOL() for these variables on ia64 and microblaze" * tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix min_low_pfn/max_low_pfn build errors microblaze: fix min_low_pfn/max_low_pfn build errors
2020-09-03Merge tag 'affs-for-5.9-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fix from David Sterba: "One fix to make permissions work the same way as on AmigaOS" * tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix basic permission bits to actually work
2020-09-03xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt filesDarrick J. Wong
The realtime flag only applies to the data fork, so don't use the realtime block number checks on the attr fork of a realtime file. Fixes: 30b0984d9117 ("xfs: refactor bmap record validation") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2020-09-03Merge tag 'media/v5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
2020-09-03dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in ↵Krzysztof Kozlowski
kerneldoc Fix W=1 compile warnings (invalid kerneldoc): drivers/dma-buf/dma-fence-chain.c:233: warning: Function parameter or member 'seqno' not described in 'dma_fence_chain_init' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819175134.19261-2-krzk@kernel.org
2020-09-03dma-buf: Fix kerneldoc of dma_buf_set_name()Krzysztof Kozlowski
Fix W=1 compile warnings (invalid kerneldoc): drivers/dma-buf/dma-buf.c:328: warning: Function parameter or member 'dmabuf' not described in 'dma_buf_set_name' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819175134.19261-1-krzk@kernel.org
2020-09-03ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th GenTakashi Iwai
There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-03MIPS: SNI: Fix SCSI interruptThomas Bogendoerfer
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt line. Commit 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared request_irq()") accidently dropped the IRQF_SHARED bit, which breaks registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for ISA interrupt. Fixes: 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared request_irq()") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-03MIPS: add missing MSACSR and upper MSA initializationHuang Pei
In cc97ab235f3f ("MIPS: Simplify FP context initialization), init_fp_ctx just initialize the fp/msa context, and own_fp_inatomic just restore FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for MSA, so MSACSR and MSA upper regs's value from previous task on current cpu can leak into current task and cause unpredictable behavior when MSA context not initialized. Fixes: cc97ab235f3f ("MIPS: Simplify FP context initialization") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-03Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled"Josh Poimboeuf
Use of the new -flive-patching flag was introduced with the following commit: 43bd3a95c98e ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled") This flag has several drawbacks: - It disables some optimizations, so it can have a negative effect on performance. - According to the GCC documentation it's not compatible with LTO, which will become a compatibility issue as LTO support gets upstreamed in the kernel. - It was intended to be used for source-based patch generation tooling, as opposed to binary-based patch generation tooling (e.g., kpatch-build). It probably should have at least been behind a separate config option so as not to negatively affect other livepatch users. - Clang doesn't have the flag, so as far as I can tell, this method of generating patches is incompatible with Clang, which like LTO is becoming more mainstream. - It breaks GCC's implicit noreturn detection for local functions. This is the cause of several "unreachable instruction" objtool warnings. - The broken noreturn detection is an obvious GCC regression, but we haven't yet gotten GCC developers to acknowledge that, which doesn't inspire confidence in their willingness to keep the feature working as optimizations are added or changed going forward. - While there *is* a distro which relies on this flag for their distro livepatch module builds, there's not a publicly documented way to create safe livepatch modules with it. Its use seems to be based on tribal knowledge. It serves no benefit to those who don't know how to use it. (In fact, I believe the current livepatch documentation and samples are misleading and dangerous, and should be corrected. Or at least amended with a disclaimer. But I don't feel qualified to make such changes.) Also, we have an idea for using objtool to detect function changes, which could potentially obsolete the need for this flag anyway. At this point the flag has no benefits for upstream which would counteract the above drawbacks. Revert it until it becomes more ready. This reverts commit 43bd3a95c98e1a86b8b55d97f745c224ecff02b9. Fixes: 43bd3a95c98e ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/696262e997359666afa053fe7d1a9fb2bb373964.1595010490.git.jpoimboe@redhat.com
2020-09-03x86/mm/32: Bring back vmalloc faulting on x86_32Joerg Roedel
One can not simply remove vmalloc faulting on x86-32. Upstream commit: 7f0a002b5a21 ("x86/mm: remove vmalloc faulting") removed it on x86 alltogether because previously the arch_sync_kernel_mappings() interface was introduced. This interface added synchronization of vmalloc/ioremap page-table updates to all page-tables in the system at creation time and was thought to make vmalloc faulting obsolete. But that assumption was incredibly naive. It turned out that there is a race window between the time the vmalloc or ioremap code establishes a mapping and the time it synchronizes this change to other page-tables in the system. During this race window another CPU or thread can establish a vmalloc mapping which uses the same intermediate page-table entries (e.g. PMD or PUD) and does no synchronization in the end, because it found all necessary mappings already present in the kernel reference page-table. But when these intermediate page-table entries are not yet synchronized, the other CPU or thread will continue with a vmalloc address that is not yet mapped in the page-table it currently uses, causing an unhandled page fault and oops like below: BUG: unable to handle page fault for address: fe80c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 33183067 *pte = a8648163 Oops: 0002 [#1] SMP CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G ... Call Trace: ldt_dup_context+0x66/0x80 dup_mm+0x2b3/0x480 copy_process+0x133b/0x15c0 _do_fork+0x94/0x3e0 __ia32_sys_clone+0x67/0x80 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7eef549 So the arch_sync_kernel_mappings() interface is racy, but removing it would mean to re-introduce the vmalloc_sync_all() interface, which is even more awful. Keep arch_sync_kernel_mappings() in place and catch the race condition in the page-fault handler instead. Do a partial revert of above commit to get vmalloc faulting on x86-32 back in place. Fixes: 7f0a002b5a21 ("x86/mm: remove vmalloc faulting") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org
2020-09-03x86/cmdline: Disable jump tables for cmdline.cArvind Sankar
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the switch statement in cmdline_find_option (jump tables are disabled when CONFIG_RETPOLINE is enabled). This function is called very early in boot from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time, the kernel is still executing out of the identity mapping, but the jump table will contain virtual addresses. Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is enabled. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200903023056.3914690-1-nivedita@alum.mit.edu
2020-09-03soundwire: fix double free of dangling pointerTom Rix
clang static analysis flags this problem stream.c:844:9: warning: Use of memory after it is freed kfree(bus->defer_msg.msg->buf); ^~~~~~~~~~~~~~~~~~~~~~~ This happens in an error handler cleaning up memory allocated for elements in a list. list_for_each_entry(m_rt, &stream->master_list, stream_node) { bus = m_rt->bus; kfree(bus->defer_msg.msg->buf); kfree(bus->defer_msg.msg); } And is triggered when the call to sdw_bank_switch() fails. There are a two problems. First, when sdw_bank_switch() fails, though it frees memory it does not clear bus's reference 'defer_msg.msg' to that memory. The second problem is the freeing msg->buf. In some cases msg will be NULL so this will dereference a null pointer. Need to check before freeing. Fixes: 99b8a5d608a6 ("soundwire: Add bank switch routine") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03interconnect: Show bandwidth for disabled paths as zero in debugfsMatthias Kaehlcke
For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0Peter Ujfalusi
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support SR2. Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip update, we need to also update the am654 rchan_oes_offset. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bugBen Skeggs
Thanks to NVIDIA for confirming this workaround, and clarifying which HW is affected. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
2020-09-03drm/nouveau/kms/nv50-gp1xx: disable notifies again after core updateBen Skeggs
This was lost during the header conversion. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03drm/nouveau/kms/nv50-: add some whitespace before debug messageBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03drm/nouveau/kms/gv100-: Include correct push header in crcc37d.cLyude Paul
Looks like when we converted everything over to Nvidia's class headers, we mistakenly included the nvif/push507b.h instead of nvif/pushc37b.h, which resulted in breaking CRC reporting for volta+: nouveau 0000:1f:00.0: disp: chid 0 stat 10003361 reason 3 [RESERVED_METHOD] mthd 0d84 data 00000000 code 00000000 nouveau 0000:1f:00.0: disp: chid 0 stat 10003360 reason 3 [RESERVED_METHOD] mthd 0d80 data 00000000 code 00000000 nouveau 0000:1f:00.0: DRM: CRC notifier ctx for head 3 not finished after 50ms So, fix that. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: c4b27bc8682c ("drm/nouveau/kms/nv50-: convert core crc_set_src() to new push macros") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03drm/radeon: Prefer lower feedback dividersKai-Heng Feng
Commit 2e26ccb119bd ("drm/radeon: prefer lower reference dividers") fixed screen flicker for HP Compaq nx9420 but breaks other laptops like Asus X50SL. Turns out we also need to favor lower feedback dividers. Users confirmed this change fixes the regression and doesn't regress the original fix. Fixes: 2e26ccb119bd ("drm/radeon: prefer lower reference dividers") BugLink: https://bugs.launchpad.net/bugs/1791312 BugLink: https://bugs.launchpad.net/bugs/1861554 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03drm/amdgpu: Fix bug in reporting voltage for CIKSandeep Raghuraman
On my R9 390, the voltage was reported as a constant 1000 mV. This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor() function, where some magic constants were used in a condition, to determine whether the voltage should be read from PLANE2_VID or PLANE1_VID. The VDDC mask was incorrectly used, instead of the VDDGFX mask. This patch changes the code to use the correct defined constants (and apply the correct bitshift), thus resulting in correct voltage reporting. Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03drm/amdgpu: Specify get_argument function for ci_smu_funcsSandeep Raghuraman
Starting in Linux 5.8, the graphics and memory clock frequency were not being reported for CIK cards. This is a regression, since they were reported correctly in Linux 5.7. After investigation, I discovered that the smum_send_msg_to_smc() function, attempts to call the corresponding get_argument() function of ci_smu_funcs. However, the get_argument() function is not defined in ci_smu_funcs. This patch fixes the bug by specifying the correct get_argument() function. Fixes: a0ec225633d9f6 ("drm/amd/powerplay: unified interfaces for message issuing and response checking") Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-09-03drm/amd/pm: enable MP0 DPM for sienna_cichlidJiansong Chen
Enable MP0 clock DPM for sienna_cichlid. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp settingEvan Quan
Normally softwareshutdowntemp should be greater than Thotspotlimit. However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while Thotspotlimit is 105C. This seems not right and may trigger some false alarms. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-09-03drm/amd/pm: fix is_dpm_running() run error on 32bit systemKevin Wang
v1: the C type "unsigned long" size is 32bit on 32bit system, it will cause code logic error, so replace it with "uint64_t". v2: remove duplicate cast operation. Signed-off-by: Kevin <kevin1.wang@amd.com> Suggest-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03kconfig: remove redundant assignment prompt = promptDenis Efremov
Semi-automatic removing of localization macros changed the line from "prompt = _(prompt);" to "prompt = prompt;". Drop the reduntand assignment. Fixes: 694c49a7c01c ("kconfig: drop localization support") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-03kbuild: Documentation: clean up makefiles.rstRandy Dunlap
This is a general cleanup of kbuild/makefiles.rst: * Use "Chapter" for major heading references and use "section" for the next-level heading references, for consistency. * Section 3.8 was deleted long ago. * Drop the ending ':' in section names in the contents list. * Correct some section numbering references. * Correct verb agreement typo. * Fix run-on sentence punctuation. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-03kconfig: streamline_config.pl: check defined(ENV variable) before using itRandy Dunlap
A user reported: 'Use of uninitialized value $ENV{"LMC_KEEP"} in split at ./scripts/kconfig/streamline_config.pl line 596.' so first check that $ENV{LMC_KEEP} is defined before trying to use it. Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-02block: allow for_each_bvec to support zero len bvecMing Lei
Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02scsi: mpt3sas: Don't call disable_irq from IRQ poll handlerTomas Henzl
disable_irq() might sleep, replace it with disable_irq_nosync(). For synchronisation 'irq_poll_scheduled' is sufficient Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: megaraid_sas: Don't call disable_irq from process IRQ pollTomas Henzl
disable_irq() might sleep. Replace it with disable_irq_nosync() which is sufficient as irq_poll_scheduled protects against concurrently running complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion(). Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com Fixes: a6ffd5bf681 scsi: megaraid_sas: Call disable_irq from process IRQ poll Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-02scsi: target: iscsi: Fix hang in iscsit_access_np() when getting ↵Hou Pu
tpg->np_login_sem The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-09 20:29:13 +0000