summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-21crypto: picoxcell - Update to the current clk APIMichael van der Westhuizen
The picoXcell hardware crypto accelerator driver was using an older version of the clk framework, and not (un)preparing the clock before enabling/disabling it. This change uses the handy clk_prepare_enable function to interact with the current clk framework correctly. Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-21crypto: nx - Check for bogus firmware propertiesHerbert Xu
The nx driver reads two crucial paramters from the firmware for each crypto algorithm, the maximum SG list length and byte limit. Unfortunately those two parameters may be bogus, or worse they may be absent altogether. When this happens the algorithms will still register successfully but will fail when used or tested. This patch adds checks to report any firmware entries which are found to be bogus, and avoid registering algorithms which have bogus parameters. A warning is also printed when an algorithm is not registered because of this as there may have been no firmware entries for it at all. Reported-by: Ondrej Moriš <omoris@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-21ext4: prevent ext4_quota_write() from failing due to ENOSPCTheodore Ts'o
In order to prevent quota block tracking to be inaccurate when ext4_quota_write() fails with ENOSPC, we make two changes. The quota file can now use the reserved block (since the quota file is arguably file system metadata), and ext4_quota_write() now uses ext4_should_retry_alloc() to retry the block allocation after a commit has completed and released some blocks for allocation. This fixes failures of xfstests generic/270: Quota error (device vdc): write_blk: dquota write failed Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-20ext4: call sync_blockdev() before invalidate_bdev() in put_super()Theodore Ts'o
Normally all of the buffers will have been forced out to disk before we call invalidate_bdev(), but there will be some cases, where a file system operation was aborted due to an ext4_error(), where there may still be some dirty buffers in the buffer cache for the device. So try to force them out to memory before calling invalidate_bdev(). This fixes a warning triggered by generic/081: WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f() Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-20jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara
It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Apologies for the late pull request. Here are the outstanding target-pending fixes for v4.1 code. The series contains three patches from Sagi + Co that address a few iser-target issues that have been uncovered during recent testing at Mellanox. Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix possible use-after-free iser-target: release stale iser connections iser-target: Fix variable-length response error completion
2015-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains a final Netfilter pull request for net-next 4.2. This mostly addresses some fallout from the previous pull request, small netns updates and a couple of new features for nfnetlink_log and the socket match that didn't get in time for the previous pull request. More specifically they are: 1) Add security context information to nfnetlink_queue, from Roman Kubiak. 2) Add support to restore the sk_mark into skb->mark through xt_socket, from Harout Hedeshian. 3) Force alignment of 16 bytes of per cpu xt_counters, from Eric Dumazet. 4) Rename br_netfilter.c to br_netfilter_hooks.c to prepare split of IPv6 code into a separated file. 5) Move the IPv6 code in br_netfilter into a separated file. 6) Remove unused RCV_SKB_FAIL() in nfnetlink_queue and nfetlink_log, from Eric Biederman. 7) Two liner to simplify netns logic in em_ipset_match(). 8) Add missing includes to net/net_namespace.h to avoid compilation problems that result from not including linux/netfilter.h in netns headers. 9) Use a forward declaration instead of including linux/proc_fs.h from netns/netfilter.h 10) Add a new linux/netfilter_defs.h to replace the linux/netfilter.h inclusion in netns headers. 11) Remove spurious netfilter.h file included in the net tree, also from Eric Biederman. 12) Fix x_tables compilation warnings on 32 bits platforms that resulted from recent changes in x_tables counters, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A smattering of fixes, mgag200: don't accept modes that aren't aligned properly as hw can't do it i915: two regression fixes radeon: one query to allow userspace fixes one oops fixer for older hw with new options enabled" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query drm/mgag200: Reject non-character-cell-aligned mode widths Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
2015-06-20Merge tag 'tegra-for-4.2-clk' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.2-rc1 This contains the EMC clock driver that's been exhaustively reviewed and tested. It also includes a change to the clock core that allows a clock provider to perform low-level reparenting of clocks. This is required by the EMC clock driver because the reparenting needs to be done at a very specific point in time during the EMC frequency switch.
2015-06-20Merge branch 'clk-exynos-cpu-clk' into clk-nextMichael Turquette
Folded into this merge commit is a build error fix: s/clk/core in clk_change_rate due to the new struct clk_core
2015-06-20SUNRPC: Set the TCP user timeout option on client socketsTrond Myklebust
Use the TCP_USER_TIMEOUT socket option to advertise to the server how long we will keep the connection open if there is unacknowledged data. See RFC5482. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-20cpufreq: exynos: remove Exynos4210 specific cpufreq driver supportThomas Abraham
Exynos4210 based platforms have switched over to use generic cpufreq driver for cpufreq functionality. So the Exynos specific cpufreq support for these platforms can be removed. Changes by Bartlomiej: - dropped Exynos5250 support removal for now - updated exynos-cpufreq.[c,h] Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20ARM: Exynos: switch to using generic cpufreq driver for Exynos4210Thomas Abraham
The new CPU clock type allows the use of generic CPUfreq driver. Switch Exynos4210 to using generic cpufreq driver. Changes by Bartlomiej: - removed non-Exynos4210 support for now Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu ↵Thomas Abraham
clock With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos4210. Changes by Bartlomiej: - fixed issue with wrong dividers being setup by Common Clock Framework (by an addition of CLK_RECALC_NEW_RATES clock flag to mout_apll clock, without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board), this was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags") but using these flags is not sufficient to fix the issue observed - removed Exynos5250 and Exynos5420 support for now Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: samsung: add infrastructure to register cpu clocksThomas Abraham
The CPU clock provider supplies the clock to the CPU clock domain. The composition and organization of the CPU clock provider could vary among Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers and gates. This patch defines a new clock type for CPU clock provider and adds infrastructure to register the CPU clock providers for Samsung platforms. Changes by Bartlomiej: - fixed issue with setting lower dividers before the parent clock speed was lowered (the issue resulted in lockup on Exynos4210 SoC based Origen board when "ondemand" cpufreq governor was stress tested) - fixed missing spin_unlock on error in exynos_cpuclk_post_rate_change() problem by moving cfg_data search outside of the spin locked area - removed leftover kfree() in exynos_register_cpu_clock() that could result in dereferencing the NULL pointer on error - moved spin_lock earlier in exynos_cpuclk_pre_rate_change() to cover reading of E4210_SRC_CPU and E4210_DIV_CPU1 registers - added missing "last chance" checks to wait_until_divider_stable() and wait_until_mux_stable() (needed in case that IRQ handling took long time to proceed and resulted in function printing incorrect error message about timeout) - moved E4210_CPU_DIV[0,1]() macros just before their only users, this resulted in moving them from patch #2 to patch #3/6 ("clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock") - removed E5250_CPU_DIV[0,1](), E5420_EGL_DIV0() and E5420_KFC_DIV() macros for now - added my Copyrights to drivers/clk/samsung/clk-cpu.c Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock supportBartlomiej Zolnierkiewicz
This flag is needed to fix the issue with wrong dividers being setup by Common Clock Framework when using the new Exynos cpu clock support. The issue happens because clk_core_set_rate_nolock() calls clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have a chance to run. In case of Exynos cpu clock support pre/post clock notifiers are registered for mout_apll clock which is a parent of armclk cpu clock and dividers are modified in both pre and post clock notifier. This results in wrong dividers values being later programmed by clk_change_rate(top). To workaround the problem CLK_RECALC_NEW_RATES flag is added and it is set for mout_apll clock later so the correct divider values are re-calculated after both pre and post clock notifiers had run. For example when using "performance" governor on Exynos4210 Origen board the cpufreq-dt driver requests to change the frequency from 1000MHz to 1200MHz and after the change state of the relevant clocks is following: Without use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 300000000 div_hpm rate: 300000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 300000000 div_pclk_dbg rate: 150000000 sclk_apll rate: 1200000000 sclk_apll_div_2 rate: 600000000 With use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 200000000 div_hpm rate: 200000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 240000000 div_pclk_dbg rate: 120000000 sclk_apll rate: 150000000 sclk_apll_div_2 rate: 75000000 Without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board. This issue was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags" patch) but usage of these flags is not sufficient to fix the issue observed. Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20Merge branch 'irq/for-x86' into irq/coreThomas Gleixner
Get the infrastructure patches which are required for x86/apic into core
2015-06-20genirq: Remove bogus restriction in irq_move_mask_irq()Thomas Gleixner
If an interrupt is marked with the no balancing flag, we still allow setting the affinity for such an interrupt from the kernel itself, but for interrupts which move the affinity from interrupt context via irq_move_mask_irq() this runs into a check for the no balancing flag, which in turn ends up with an endless storm of stack dumps because the move pending flag is not reset. Allow the move for interrupts which have the no balancing flag set and clear the move pending bit before checking for interrupts with the per cpu flag set. Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1506201002570.4107@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-20block: nvme-scsi: Catch kcalloc failureAxel Lin
res variable was initialized to -ENOMEM, but it's override by nvme_trans_copy_from_user(). So current code returns 0 if kcalloc fails. Fix it to return proper error code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-20cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULLJens Axboe
Commit 9470e4a693db only covered the initial bug report, there are other spots in CFQ where we need to check that we actually have a valid cfq_group_data structure. Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data") Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-20x86/hpet: Check for irq==0 when allocating hpet MSI interruptsJiang Liu
irq == 0 is not a valid irq for a irqdomain MSI allocation, but hpet code checks only for negative return values. Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/558447AF.30703@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-20ALSA: hda-beep: Update authors dead email addressMatt Ranostay
Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-19snic: driver for Cisco SCSI HBANarsimhulu Musini
Cisco has developed a new PCI HBA interface called sNIC, which stands for SCSI NIC. This is a new storage feature supported on specialized network adapter. The new PCI function provides a uniform host interface and abstracts backend storage. [jejb: fix up checkpatch errors] Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-19SUNRPC: Ensure we release the TCP socket once it has been closedTrond Myklebust
This fixes a regression introduced by commit caf4ccd4e88cf2 ("SUNRPC: Make xs_tcp_close() do a socket shutdown rather than a sock_release"). Prior to that commit, the autoclose feature would ensure that an idle connection would result in the socket being both disconnected and released, whereas now only gets disconnected. While the current behaviour is harmless, it does leave the port bound until either RPC traffic resumes or the RPC client is shut down. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-20Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Replace CTRL+z with 'f' as hotkey for enable/disable events (Arnaldo Carvalho de Melo) - Do not exit when 'f' is pressed in 'report' mode (Arnaldo Carvalho de Melo) - Tell the user how to unfreeze events after pressing 'f' in 'perf top' (Arnaldo Carvalho de Melo) - React to unassigned hotkey pressing in 'top/report' (Arnaldo Carvalho de Melo) - Display total number of samples with --show-total-period in 'annotate' (Martin Liška) - Add timeout to make procfs mmap processing more robust (Kan Liang) - Fix sort__sym_cmp to also compare end of symbol (Yannick Brosseau) Infrastructure changes: - Ensure thread-stack is flushed (Adrian Hunter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build breakage if prefix= is specified, this introduced a regression for a build idiom used by the Debian "linux-tools" package, that does: MAKE_PERF := $(MAKE) prefix=/usr V=1 ARCH=$(KERNEL_ARCH_PERF) ... Fix it. (Lukas Wunner) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-19perf tools: Configurable per thread proc map processing time outKan Liang
The time out to limit the individual proc map processing was hard code to 500ms. This patch introduce a new option --proc-map-timeout to make the time limit configurable. Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf tools: Add time out to force stop proc map processingKan Liang
System wide sampling like 'perf top' or 'perf record -a' read all threads /proc/xxx/maps before sampling. If there are any threads which generating a keeping growing huge maps, perf will do infinite loop during synthesizing. Nothing will be sampled. This patch fixes this issue by adding per-thread timeout to force stop this kind of endless proc map processing. PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that the mmap record are truncated by time out. User will get warning notification when truncated mmap records are detected. Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf report: Fix sort__sym_cmp to also compare end of symbolYannick Brosseau
When using a map file from a JIT, due to memory reuse, we can obtain multiple symbols with the same start address but a different length. The symbols__find does check for the end so not doing it in sort__sym_cmp was causing the hist_entry in the annotate part of a report to match to the wrong entry, causing a fatal error. Signed-off-by: Yannick Brosseau <scientist@fb.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf hists browser: React to unassigned hotkey pressingArnaldo Carvalho de Melo
When that happens we were just ignoring the key press, now this message is presented in the bottom line (the help line): "Press '?' for help on key bindings" Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf top: Tell the user how to unfreeze events after pressing 'f'Arnaldo Carvalho de Melo
When the user presses 'f' to disable events the visual cues are, well, the percentages not changing and the number of events freezing. Be more explicit by changing the help line at the bottom of the screen to show the following messages when 'f' is pressed: "Press 'f' again to re-enable the events" And then, when 'f' is pressed again: "Press 'f' to disable the events or 'h' Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf hists browser: Honour the help line provided by builtin-{top,report}.cArnaldo Carvalho de Melo
The hists_browser was replacing whatever helpline provided by 'top' or 'report' with a static "Press '?' for help on key bindings", fix it. Now the message passed by top appears at the bottom of the screen: "For a higher level overview, try: perf top --sort comm,dso" As well the message that will be added when the user presses 'f' to disable the events, something along the lines of "press f again to re-enable...". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf hists browser: Do not exit when 'f' is pressed in 'report' modeArnaldo Carvalho de Melo
The 'f' hotkey is only used when in 'top', dynamic mode, to enable/disable events, currently not making sense in the 'report', static mode, where we can't go from showing the histogram entries created from a perf.data file to adding more events after recreating the evlist created from the perf.data file, albeit possible, this is not implemented right now. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf top: Replace CTRL+z with 'f' as hotkey for enable/disable eventsArnaldo Carvalho de Melo
I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known action, i.e. suspend the app, perf needs to follow that convention, that will be done on a separate patch, tho. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19nfsd: refactor nfs4_preprocess_stateid_opChristoph Hellwig
Split out two self contained helpers to make the function more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-19nfsd: clean up raparams handlingChristoph Hellwig
Refactor the raparam hash helpers to just deal with the raparms, and keep opening/closing files separate from that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-19nfsd: use swap() in sort_pacl_range()Fabian Frederick
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-19perf tools: Fix build breakage if prefix= is specifiedLukas Wunner
Invoking Makefile.perf with prefix= breaks the build since Makefile.perf hands that variable down to Makefile.build where it overrides prefix := $(subst ./,,$(OUTPUT)$(dir)/) leading to errors like this: No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o' Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Fixes: c819e2cf2eb6f65d3208d195d7a0edef6108d5 Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf annotate: Rename source_line_percent to source_line_samplesArnaldo Carvalho de Melo
To better reflect the purpose of this struct, that is to hold info about samples, its total number and is percentage. Cc: Martin Liska <mliska@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf annotate: Display total number of samples with --show-total-periodMartin Liška
To compare two records on an instruction base, with --show-total-period option provided, display total number of samples that belong to a line in assembly language. New hot key 't' is introduced for 'perf annotate' TUI. Signed-off-by: Martin Liska <mliska@suse.cz> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19locking/rtmutex: Update stale plist commentsDavidlohr Bueso
... as of fb00aca4744 (rtmutex: Turn the plist into an rb-tree) we no longer use plists for queuing any waiters. Update stale comments. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1432056298-18738-4-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19futex: Lower the lock contention on the HB lock during wake upSebastian Andrzej Siewior
wake_futex_pi() wakes the task before releasing the hash bucket lock (HB). The first thing the woken up task usually does is to acquire the lock which requires the HB lock. On SMP Systems this leads to blocking on the HB lock which is released by the owner shortly after. This patch rearranges the unlock path by first releasing the HB lock and then waking up the task. [ tglx: Fixed up the rtmutex unlock path ] Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Link: http://lkml.kernel.org/r/20150617083350.GA2433@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19NVMe: Fix IO for extended metadata formatsKeith Busch
This fixes io submit ioctl handling when using extended metadata formats. When these formats are used, the user provides a single virtually contiguous buffer containing both the block and metadata interleaved, so the metadata size needs to be added to the total length and not mapped as a separate transfer. The command is also driver generated, so this patch does not enforce blk-integrity extensions provide the metadata buffer. Reported-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-19perf tools: Ensure thread-stack is flushedAdrian Hunter
The thread-stack represents a thread's current stack. When a thread exits there can still be many functions on the stack e.g. exit() can be called many levels deep, so all the callers will never return. To get that information output, the thread-stack must be flushed. Previously it was assumed the thread-stack would be flushed when the struct thread was deleted. With thread ref-counting it is no longer clear when that will be, if ever. So instead explicitly flush all the thread-stacks at the end of a session. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19rtc: imxdi: when locked, do not fail silentlyJuergen Borleis
If the DryICE unit is locked it is impossible to set the time. Provide an error message for this case. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Robert Schwebel <rsc@pengutronix.de> [rsc: got NDA clearance from Freescale] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: imxdi: monitor a security violation at runtimeJuergen Borleis
Maybe the unit enters the hardware related state at runtime and not at system boot time (after a power cycle). Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Robert Schwebel <rsc@pengutronix.de> [rsc: got NDA clearance from Freescale] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: imxdi: add the unit recovery codeJuergen Borleis
This code is required to recover the unit from a security violation. Hopefully this code can recover the unit from a hardware related invalid state as well. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Robert Schwebel <rsc@pengutronix.de> [rsc: got NDA clearance from Freescale] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: imxdi: add some background info about the states the machine can be inJuergen Borleis
Document the i.MX DryIce machine states. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Robert Schwebel <rsc@pengutronix.de> [rsc: got NDA clearance from Freescale] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: imxdi: avoid the __raw* register access functionsJuergen Borleis
Be independent of the endianness of the kernel. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: s3c: Integrate Exynos3250 into S3C6410Krzysztof Kozlowski
There are now no differences between RTC on Exynos3250 and S3C6410. Merge everything into one so duplicated code could be removed. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-09-18 14:52:05 +0000