summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-14net:ethernet:cadence: Replace dev_kfree_skb_any by dev_consume_skb_anyHuang Zijiang
The skb should be freed by dev_consume_skb_any() in macb_pad_and_fcs() when *skb is still used. The *skb is be replaced by nskb, so the original *skb should be consumed(not drop). Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net:dl2k: Replace dev_kfree_skb_irq by dev_consume_skb_irqHuang Zijiang
dev_consume_skb_irq() should be called when skb xmit done.It makes drop profiles more friendly. Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net:dl2k: Modify the code style escaping the warningHuang Zijiang
modify the code style in order to removing the following warning when excute the script checkpatch.pl WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14isdn:hisax: Replace dev_kfree_skb_any by dev_consume_skb_anyHuang Zijiang
The skb should be freed by dev_consume_skb_any() in hfcpci_fill_fifo() when bcs->tx_skb is still used. The bcs->tx_skb is be replaced by skb_dequeue(&bcs->squeue), so the original bcs->tx_skb should be consumed(not drop). Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocsJann Horn
The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used. However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`. Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing. To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14Merge branch 'net-phy-fix-locking-issue'David S. Miller
Heiner Kallweit says: ==================== net: phy: fix locking issue Russell pointed out that the locking used in phy_is_started() isn't needed and misleading. This locking also contributes to a race fixed with patch 2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: phy: fix potential race in the phylib state machineHeiner Kallweit
Russell reported the following race in the phylib state machine (quoting from his mail): if (phy_polling_mode(phydev) && phy_is_started(phydev)) phy_queue_state_machine(phydev, PHY_STATE_TIME); state = PHY_UP thread 0 thread 1 phy_disconnect() +-phy_is_started() phy_is_started() | `-phy_stop() +-phydev->state = PHY_HALTED `-phy_stop_machine() `-cancel_delayed_work_sync() phy_queue_state_machine() `-mod_delayed_work() At this point, the phydev->state_queue() has been added back onto the system workqueue despite phy_stop_machine() having been called and cancel_delayed_work_sync() called on it. Fix this by protecting the complete operation in thread 0. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: phy: don't use locking in phy_is_startedHeiner Kallweit
Russell suggested to remove the locking from phy_is_started() because the read is atomic anyway and actually the locking may be more misleading. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14selftests: fix timestamping MakefileDeepa Dinamani
The clean target in the makefile conflicts with the generic kselftests lib.mk, and fails to properly remove the compiled test programs. Remove the redundant rule, the TEST_GEN_FILES will be already removed by the CLEAN macro in lib.mk. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: ipvlan_l3s: fix kconfig dependency warningRandy Dunlap
Fix the kconfig warning in IPVLAN_L3S when neither INET nor IPV6 is enabled: WARNING: unmet direct dependencies detected for NET_L3_MASTER_DEV Depends on [n]: NET [=y] && (INET [=n] || IPV6 [=n]) Selected by [y]: - IPVLAN_L3S [=y] && NETDEVICES [=y] && NET_CORE [=y] && NETFILTER [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: nuvoton: w90p910_ether: replace dev_kfree_skb_irq by ↵Yang Wei
dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in w90p910_ether_start_xmit() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: natsemi: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: micrel: ks8695net: replace dev_kfree_skb_irq by dev_consume_skb_irq for ↵Yang Wei
drop profiles dev_consume_skb_irq() should be called in ks8695_tx_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: sgi: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: myri10ge: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop ↵Yang Wei
profiles dev_consume_skb_irq() should be called in myri10ge_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: amd: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: dlink: sundance: replace dev_kfree_skb_irq by dev_consume_skb_irq for ↵Yang Wei
drop profiles dev_consume_skb_irq() should be called in intr_handler() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Remove a redundant blank line in intr_handler(). Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14Merge branch 'uapi-Add-a-new-header-for-time-types'David S. Miller
Deepa Dinamani says: ==================== uapi: Add a new header for time types The series aims at adding a new time header: time_types.h. This header is what will eventually hold all the uapi time types that we plan to leave across the interfaces after the y2038 cleanup. The series was discussed with Arnd Bergmann. The second patch fixes the errqueue.h header, which has a dependency on these types. Note that there may be a trivial merge conflict with linux-next c70a772fda11 ("y2038: remove struct definition redirects"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14errqueue.h: Include time_types.hDeepa Dinamani
Now that we have a separate header for struct __kernel_timespec, include it directly without relying on userspace to do it. Reported-by: Ran Rozenstein <ranro@mellanox.com> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14time: Add time_types.hDeepa Dinamani
sys/time.h is the mandated include for many time related defines. However, linux/time.h overlaps sys/time.h significantly and this makes including both from userspace or one from the other impossible. This also means that userspace can get away with including sys/time.h whenever it needs linux/time.h and this is what's been happening in the user world usually. But, we have new data types that we plan to use in the uapi time interfaces also defined in the linux/time.h. But, we are unable to use these types when sys/time.h is included. Hence, move the new types to a new header, time_types.h. We intend to eventually have all the uapi defines that the kernel uses defined in this header. Note that the plan is to replace uapi interfaces with timeval to use __kernel_old_timeval, timespec to use __kernel_old_timespec etc. Reported-by: Ran Rozenstein <ranro@mellanox.com> Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14Merge branch 'devlink-region-read-fixes'David S. Miller
Parav Pandit says: ==================== devlink: 2 fixes for devlink region read This 2 patches consist of fixes for devlink region read handling. v0->v1: - Fixed typo from user to use v1->v2: - Rebased ==================== Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14devlink: Fix list access without lock while reading regionParav Pandit
While finding the devlink device during region reading, devlink device list is accessed and devlink device is returned without holding a lock. This could lead to use-after-free accesses. While at it, add lockdep assert to ensure that all future callers hold the lock when calling devlink_get_from_attrs(). Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command") Signed-off-by: Parav Pandit <parav@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14devlink: Return right error code in case of errors for region readParav Pandit
devlink_nl_cmd_region_read_dumpit() misses to return right error code on most error conditions. Return the right error code on such errors. Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14bonding: check slave set command firstlyTonghao Zhang
This patch is a little improvement. If user use the command shown as below, we should print the info [1] instead of [2]. The eth0 exists actually, and it may confuse user. $ echo "eth0" > /sys/class/net/bond4/bonding/slaves [1] "bond4: no command found in slaves file - use +ifname or -ifname" [2] "write error: No such device" Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge branch 'mlxsw-hwmon-and-thermal-extensions'David S. Miller
Ido Schimmel says: ==================== mlxsw: hwmon and thermal extensions Vadim says: This patchset contains various improvements to hwmon and thermal code in mlxsw. The most significant improvement is the ability to read modules' temperature attributes (input, fault, critical and emergency thresholds) as well as fans' fault indication. These new attributes will improve the ability to monitor the system. Patches #1-#4 add the necessary device registers and APIs to read modules' temperature attributes and fans' fault indication. Patches #5-#8 perform small improvements in hwmon and thermal code such as using a more indicative name for cooling devices. Patch #9 exposes fans' fault indication via hwmon. Patch #10 exposes modules' temperature attributes via hwmon. Patch #11 adds an hwmon label to modules' temperature sensor. This helps to parse the output of utilities such as "sensors". Patch #12 allows to bind an external cooling device ("mlxreg-fan") to mlxsw thermal zone. This will allow the mlxsw thermal zone to change the cooling level of cooling devices not programmed via switch registers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Allow thermal zone binding to an external cooling deviceVadim Pasternak
Allow thermal zone binding to an external cooling device from the cooling devices white list. It provides support for Mellanox next generation systems on which cooling device logic is not controlled through the switch registers. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Add QSFP module temperature label attribute to hwmonVadim Pasternak
Add label attribute to hwmon object for exposing QSFP module's temperature sensor name. Modules are labeled as "front panel xxx". The label is used by utilities such as "sensors": front panel 001: +0.0C (crit = +0.0C, emerg = +0.0C) .. front panel 020: +31.0C (crit = +70.0C, emerg = +80.0C) .. front panel 056: +41.0C (crit = +70.0C, emerg = +80.0C) Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Extend hwmon interface with QSFP module temperature attributesVadim Pasternak
Add new attributes to hwmon object for exposing QSFP module temperature input, fault indication, critical and emergency thresholds. Temperature input and fault indication are read from Management Temperature Bulk Register. Temperature thresholds are read from Management Cable Info Access Register. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Extend hwmon interface with fan fault attributeVadim Pasternak
Add new fan hwmon attribute for exposing fan faults (fault indication is read from Fan Out of Range Event Register). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Rename cooling deviceVadim Pasternak
Rename cooling device from "Fan" to "mlxsw_fan". Name "Fan" is too common name, and such name is misleading, while it's interpreted by user. For example name "Fan" could be used by ACPI. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Replace thermal temperature trips with definesVadim Pasternak
Replace thermal hardcoded temperature trip values with defines. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Modify thermal zone definitionVadim Pasternak
Modify thermal zone trip points setting for better alignment with system thermal requirement. Add hysteresis thresholds for thermal trips in order to avoid throttling around thermal trip point. If hysteresis temperature is not considered, PWM can have side effect of flip up/down on thermal trip point boundary. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Set different thermal polling time based on bus frequency ↵Vadim Pasternak
capability Add low frequency bus capability in order to allow core functionality separation based on bus type. Driver could run over PCIe, which is considered as high frequency bus or I2C, which is considered as low frequency bus. In the last case time setting, for example, for thermal polling interval, should be increased. Use different thermal monitoring based on bus type. For I2C bus time is set to 20 seconds, while for PCIe 1 second polling interval is used. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Add API for QSFP module temperature thresholds readingVadim Pasternak
Add new API to read QSFP module's temperature thresholds - warning and critical. New internal API reads the temperature thresholds from the modules, which are equipped with the thermal sensor. These thresholds will be exposed via hwmon subsystem. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: reg: Add Fan Out of Range Event RegisterVadim Pasternak
Add FORE (Fan Out of Range Event Register), which is used for fan fault reading. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: reg: Add Management Temperature Bulk RegisterVadim Pasternak
Add MTBR (Management Temperature Bulk Register), which is used for port temperature reading in a bulk mode. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: spectrum: Move QSFP EEPROM definitions to common locationVadim Pasternak
Move QSFP EEPROM definitions to common location from the spectrum driver in order to make them available for other mlxsw modules. They are common for all kind of chips and have relation to SFF specifications 8024, 8436, 8472, 8636, rather than to chip type. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge tag 'batadv-next-for-davem-20190213' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt - fix typo, by Sven Eckelmann - netlink restructuring patch series (part 2), by Sven Eckelmann (19 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13test_objagg: Uninitialized variable in error handlingDan Carpenter
We need to set the error message on this path otherwise some of the callers, such as test_hints_case(), print from an uninitialized pointer. We had a similar bug earlier and set "errmsg" to NULL in the caller, test_delta_action_item(). That code is no longer required so I have removed it. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13test_objagg: Test the correct variableDan Carpenter
There is a typo here. We intended to check "objagg2" but we instead test "objagg" which is not an error pointer. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13lib: objagg: Fix an error code in objagg_hints_get()Dan Carpenter
We need to set the error code on this path otherwise we return ERR_PTR(0) which would result in a NULL dereference in the caller. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()Dan Carpenter
The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13cxgb4vf: Few more link management changes.Vishal Kulkarni
CR4_QSFP 10G Speed technology should be 10000baseKR_Full And also report available FEC modes. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge branch 'pagepool-api-and-dma-address-storage'David S. Miller
Jesper Dangaard Brouer says: ==================== Fix page_pool API and dma address storage As pointed out by David Miller in [1] the current page_pool implementation stores dma_addr_t in page->private. This won't work on 32-bit platforms with 64-bit DMA addresses since the page->private is an unsigned long and the dma_addr_t a u64. Since no driver is yet using the DMA mapping capabilities of the API let's fix this by storing the information in 'struct page' and use that to store and retrieve DMA addresses from network drivers. As long as the addresses returned from dma_map_page() are aligned the first bit, used by the compound pages code should not be set. Ilias tested the first two patches on Espressobin driver mvneta, for which we have patches for using the DMA API of page_pool. [1]: https://lore.kernel.org/netdev/20181207.230655.1261252486319967024.davem@davemloft.net/ ==================== Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13page_pool: use DMA_ATTR_SKIP_CPU_SYNC for DMA mappingsJesper Dangaard Brouer
As pointed out by Alexander Duyck, the DMA mapping done in page_pool needs to use the DMA attribute DMA_ATTR_SKIP_CPU_SYNC. As the principle behind page_pool keeping the pages mapped is that the driver takes over the DMA-sync steps. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: page_pool: don't use page->private to store dma_addr_tIlias Apalodimas
As pointed out by David Miller the current page_pool implementation stores dma_addr_t in page->private. This won't work on 32-bit platforms with 64-bit DMA addresses since the page->private is an unsigned long and the dma_addr_t a u64. A previous patch is adding dma_addr_t on struct page to accommodate this. This patch adapts the page_pool related functions to use the newly added struct for storing and retrieving DMA addresses from network drivers. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mm: add dma_addr_t to struct pageJesper Dangaard Brouer
The page_pool API is using page->private to store DMA addresses. As pointed out by David Miller we can't use that on 32-bit architectures with 64-bit DMA This patch adds a new dma_addr_t struct to allow storing DMA addresses Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: sched: remove duplicated include from cls_api.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13flow_offload: fix block statsJohn Hurley
With the introduction of flow_stats_update(), drivers now update the stats fields of the passed tc_cls_flower_offload struct, rather than call tcf_exts_stats_update() directly to update the stats of offloaded TC flower rules. However, if multiple qdiscs are registered to a TC shared block and a flower rule is applied, then, when getting stats for the rule, multiple callbacks may be made. Take this into consideration by modifying flow_stats_update to gather the stats from all callbacks. Currently, the values in tc_cls_flower_offload only account for the last stats callback in the list. Fixes: 3b1903ef97c0 ("flow_offload: add statistics retrieval infrastructure and use it") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: sched: flower: only return error from hw offload if skip_swVlad Buslov
Recently introduced tc_setup_flow_action() can fail when parsing tcf_exts on some unsupported action commands. However, this should not affect the case when user did not explicitly request hw offload by setting skip_sw flag. Modify tc_setup_flow_action() callers to only propagate the error if skip_sw flag is set for filter that is being offloaded, and set extack error message in that case. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Fixes: 3a7b68617de7 ("cls_api: add translator to flow_action representation") Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 00:56:15 +0000