Age | Commit message (Collapse) | Author |
|
Kees noted that IBT sealing could be extended to kCFI.
Fundamentally it is the list of functions that do not have their
address taken and are thus never called indirectly. It doesn't matter
that objtool uses IBT infrastructure to determine this list, once we
have it it can also be used to clobber kCFI hashes and avoid kCFI
indirect calls.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20230622144321.494426891%40infradead.org
|
|
The current name doesn't reflect what it does very well.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20230622144321.427441595%40infradead.org
|
|
With the introduction of kCFI these helpers are no longer equivalent
to C indirect calls and should be used with care.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20230622144321.360957723%40infradead.org
|
|
On SPR, the load latency event needs an auxiliary event in the same
group to work properly. There's a check in intel_pmu_hw_config()
for this to iterate sibling events and find a mem-loads-aux event.
The for_each_sibling_event() has a lockdep assert to make sure if it
disabled hardirq or hold leader->ctx->mutex. This works well if the
given event has a separate leader event since perf_try_init_event()
grabs the leader->ctx->mutex to protect the sibling list. But it can
cause a problem when the event itself is a leader since the event is
not initialized yet and there's no ctx for the event.
Actually I got a lockdep warning when I run the below command on SPR,
but I guess it could be a NULL pointer dereference.
$ perf record -d -e cpu/mem-loads/uP true
The code path to the warning is:
sys_perf_event_open()
perf_event_alloc()
perf_init_event()
perf_try_init_event()
x86_pmu_event_init()
hsw_hw_config()
intel_pmu_hw_config()
for_each_sibling_event()
lockdep_assert_event_ctx()
We don't need for_each_sibling_event() when it's a standalone event.
Let's return the error code directly.
Fixes: f3c0eba28704 ("perf: Add a few assertions")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230704181516.3293665-1-namhyung@kernel.org
|
|
Current codebase contained the usage of two different names for this
driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users
to use, especially when trying to bind or unbind the driver manually.
The corresponding kernel module is registered with the name of `gve`.
It's more reasonable to align the name of the driver with the module.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Cc: csully@google.com
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for the return value of skb_copy in order to avoid NULL pointer
dereference.
Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While there is probably only ever a single instance of such a pcmtst
device, it's still bad style to use a static variable to store per
device data. Make use of platform_get_drvdata() and
platform_set_drvdata() which fixes a data corruption if there should be
two or more such devices (or this driver is used as a template for
another driver).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230707075058.3402832-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230707075058.3402832-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With commit 0d940a9b270b ("mm/pgtable: allow pte_offset_map[_lock]() to
fail") the kernel is now using pmd_same to compare pmd values that are
pointing to a level 4 page table page. Move the functions out of #ifdef
CONFIG_TRANSPARENT_HUGEPAGE and add a variant that can work with both 4K
and 64K page size.
kernel BUG at arch/powerpc/include/asm/book3s/64/hash-4k.h:141!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
.....
NIP [c00000000048aee0] __pte_offset_map_lock+0xf0/0x164
LR [c00000000048ae78] __pte_offset_map_lock+0x88/0x164
Call Trace:
0xc0003f000009a340 (unreliable)
__handle_mm_fault+0x1340/0x1980
handle_mm_fault+0xbc/0x380
__get_user_pages+0x320/0x550
get_user_pages_remote+0x13c/0x520
get_arg_page+0x80/0x1d0
copy_string_kernel+0xc8/0x250
kernel_execve+0x11c/0x270
run_init_process+0xe4/0x10c
kernel_init+0xbc/0x1a0
ret_from_kernel_user_thread+0x14/0x1c
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706022405.798157-1-aneesh.kumar@linux.ibm.com
|
|
Since commit aec0ba7472a7 ("powerpc/64: Use -mprofile-kernel for big
endian ELFv2 kernels"), this file is checked by objtool. Fix warnings
such as:
arch/powerpc/kernel/idle_64e.o: warning: objtool: .text+0x20: unannotated intra-function call
arch/powerpc/kernel/exceptions-64e.o: warning: objtool: .text+0x218: unannotated intra-function call
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230622112451.735268-1-mpe@ellerman.id.au
|
|
Nageswara reported that /proc/self/status was showing "vulnerable" for
the Speculation_Store_Bypass feature on Power10, eg:
$ grep Speculation_Store_Bypass: /proc/self/status
Speculation_Store_Bypass: vulnerable
But at the same time the sysfs files, and lscpu, were showing "Not
affected".
This turns out to simply be a bug in the reporting of the
Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case.
When SEC_FTR_STF_BARRIER was added, so that firmware could communicate
the vulnerability was not present, the code in ssb_prctl_get() was not
updated to check the new flag.
So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than
adding the new check to the existing if block and expanding the comment
to cover both cases, rewrite the three cases to be separate so they can
be commented separately for clarity.
Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517074945.53188-1-mpe@ellerman.id.au
|
|
Lockdep warns that the use of the hpte_lock in native_hpte_remove() is
not safe against an IRQ coming in:
================================
WARNING: inconsistent lock state
6.4.0-rc2-g0c54f4d30ecc #1 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
qemu-system-ppc/93865 [HC0[0]:SC0[0]:HE1:SE1] takes:
c0000000021f5180 (hpte_lock){+.?.}-{0:0}, at: native_lock_hpte+0x8/0xd0
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_insert+0xd4/0x2a0
__hash_page_64K+0x218/0x4f0
hash_page_mm+0x464/0x840
do_hash_fault+0x11c/0x260
data_access_common_virt+0x210/0x220
__ip_select_ident+0x140/0x150
...
net_rx_action+0x3bc/0x440
__do_softirq+0x180/0x534
...
sys_sendmmsg+0x34/0x50
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
...
Possible unsafe locking scenario:
CPU0
----
lock(hpte_lock);
<Interrupt>
lock(hpte_lock);
*** DEADLOCK ***
...
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
print_usage_bug.part.0+0x250/0x278
mark_lock+0xc9c/0xd30
__lock_acquire+0x440/0x1ca0
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_remove+0xb0/0x190
kvmppc_mmu_map_page+0x650/0x698 [kvm_pr]
kvmppc_handle_pagefault+0x534/0x6e8 [kvm_pr]
kvmppc_handle_exit_pr+0x6d8/0xe90 [kvm_pr]
after_sprg3_load+0x80/0x90 [kvm_pr]
kvmppc_vcpu_run_pr+0x108/0x270 [kvm_pr]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x340/0x470 [kvm]
kvm_vcpu_ioctl+0x338/0x8b8 [kvm]
sys_ioctl+0x7c4/0x13e0
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
I suspect kvm_pr is the only caller that doesn't already have IRQs
disabled, which is why this hasn't been reported previously.
Fix it by disabling IRQs in native_hpte_remove().
Fixes: 35159b5717fa ("powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517123033.18430-1-mpe@ellerman.id.au
|
|
This patch handles the regmap settings and re-detects the jack when the system level
suspend/resume.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230705042931.24950-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Select REGMAP_AC97 to fix these build errors:
ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
Fixes: 6bbf787bb70c ("ASoC: stac9766: Convert to regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20230701044836.18789-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the PM8916 analog WCD codec bindings to YAML.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-5-6b4b6cd081e5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Depending on hardware implementaion of DWC I2S controller may support
TDM mode if enabled in SoC at design time.
Unfortunately there is no way to detect TDM capability for DWC by
reading registers. Anyway, if such capability enabled, TDM mode
can be enabled and configured by dai-tdm-slot-* DT options.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230622200031.120168-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove .owner field if calls are used which set it automatically.
to silence the warning:
./sound/soc/codecs/tas2781-i2c.c:746:3-8: No need to set .owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5589
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230625010547.7353-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the NAU8821 audio CODEC bindings to DT schema.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230628085009.1130318-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove redundant sdca mask for clear code.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20230621080750.13511-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dlc->of_node will be set on snd_soc_get_dlc(), but we want
1) protect it by mutex, 2) set only when successed.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rc1kerv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Different PCM devices may have different PCM hardware parameters. It
requires PCM hardware parameters set separately if there is more than
one rpmsg sound card.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230625065412.651870-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a wrapper function to support set_jack component driver callback.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230705042349.24905-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Required CPU/Codec/Platform dlc (snd_soc_dai_link_component) are similar
but not same, and very complex. Current implementation is very confusable
and it will be more complex if multi Component was supported.
This patch cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7l9blsn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current snd_soc_get_dai_id() is initializing dlc *manually*,
but it will might be a problem if dlc had new extra parameter.
This patch uses default initialization, otherwise, non initialized
part will be strange value.
This is prepare for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5pblst.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the read_poll_timeout marco for PSP smn_read calls.
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Link: https://lore.kernel.org/r/20230630070544.2167421-2-Mastan.Katragadda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An additional-devs subnode can be present in the simple-card top node.
This subnode is used to declared some "virtual" additional devices.
Create related devices from this subnode and avoid this subnode presence
to interfere with the already supported subnodes analysis.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-14-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Industrial I/O devices can be present in the audio path.
These devices needs to be used as audio components in order to be
fully integrated in the audio path.
This support allows to consider these Industrial I/O devices as
auxiliary audio devices and allows one to control them using mixer
controls.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-13-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SND_SOC_DAPM_* helpers family are used to build widgets array in a
static way.
Convert them to return a compound literal in order to use them in both
static and dynamic way.
With this conversion, the different SND_SOC_DAPM_* parameters can be
computed by the code and the widget can be built based on this parameter
computation.
static int create_widget(char *input_name)
{
struct snd_soc_dapm_widget widget;
char name*;
...
name = input_name;
if (!name)
name = "default";
widget = SND_SOC_DAPM_INPUT(name);
...
}
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-12-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A helper, iio_read_max_channel_raw() exists to read the available
maximum raw value of a channel but nothing similar exists to read the
available minimum raw value.
This new helper, iio_read_min_channel_raw(), fills the hole and can be
used for reading the available minimum raw value of a channel.
It is fully based on the existing iio_read_max_channel_raw().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-11-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This FIXME comment is more a TODO one.
It is a note when someone will need for this currently unsupported case.
Change from FIXME to TODO.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-10-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use max_array() to get the maximum value from an array instead of a
custom local loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce min_array() (resp max_array()) in order to get the
minimal (resp maximum) of values present in an array.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the mutex.h inclusion order as it seems to be the only one
misplaces.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-7-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The code uses a local variable to initialize a null pointer in order to
avoid accessing this null pointer later on.
Simply removed the 'unused' variable and check for the null pointer just
before accessing it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-6-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The raw values notes mention 'ADC counts' and are not fully accurate.
Reword the notes in order to remove the 'ADC counts' and describe the
conversion needed between a raw value and a value in the standard units.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-5-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current implementation returns the error code as part of the
default switch case.
This can lead to returning an incorrect positive value in case of
iio_avail_type enum entries evolution.
In order to avoid this case, be more strict in error checking.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The additional-devs subnode allows to declared some virtual devices
as sound card children.
These virtual devices can then be used by the sound card and so be
present in the audio path.
The first virtual device supported is the audio IIO auxiliary device
in order to support an IIO device as an audio auxiliary device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@©sgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Industrial I/O devices can be present in the audio path.
These devices needs to be viewed as audio components in order to be
fully integrated in the audio path.
audio-iio-aux allows to consider these Industrial I/O devices as
auxliary audio devices.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@©sgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new dmi sys vendor, product name and product family to
config entry table to enable audio for valve boards.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-5-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add acpi machine id's for vangogh platform and configure
driver data to enable SOF sound card support on newer boards.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In newer platforms max98388 codec as amplifier codec. Add support for
maxim codec in generic machine driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In newer variants nau8821 as primary codec. Add support for nau8821
codec in generic machine driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230707120730.1948445-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the Vangogh machine driver to support a variant based on the
Nuvoton NAU88L21 Codec and the Analog Devices MAX98388 Speaker
Amplifier.
Additionally, enable probing via ACPI match table for this and future
hardware revisions.
Co-developed-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for supporting ACPI probing, move DMI quirk handling
logic at the probe's top, to be able to return as quickly as possible in
case there is no DMI matching.
Additionally, simplify the code by replacing dmi_check_system() and
related callback with dmi_first_match(). While at it, also drop a few
unnecessary empty lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "acp5x_mach" string is provided for both driver name and
MODULE_ALIAS. Since they need to match, ensure DRV_NAME macro is used in
both locations.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230705214800.193244-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the code even references to dvb_math.c, which is now available
as int_log.c, replace its content by the calling respective API.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230619172019.21457-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703135211.87416-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace license boilerplate in udftime.c with SPDX identifier for
LGPL-2.1-or-later.
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230619172019.21457-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703135211.87416-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use ARRAY_SIZE(logtable) where makes sense.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230619172019.21457-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703135211.87416-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some existing and new users may benefit from the intlog2() and
intlog10() APIs, make them wide available.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230619172019.21457-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230703135211.87416-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|