summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-25net: bridge: mcast: remove only S,G port groups from sg_port hashNikolay Aleksandrov
We should remove a group from the sg_port hash only if it's an S,G entry. This makes it correct and more symmetric with group add. Also since *,G groups are not added to that hash we can hide a bug. Fixes: 085b53c8beab ("net: bridge: mcast: add sg_port rhashtable") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: stmmac: Add option for VLAN filter fail queue enableChuah, Kim Tatt
Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail Queuing. This option allows packets that fail VLAN filter to be routed to a specific Rx queue when Receive All is also set. When this option is enabled: - Enable VFFQ only when entering promiscuous mode, because Receive All will pass up all rx packets that failed address filtering (similar to promiscuous mode). - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN filters and get routed to selected VFFQ Rx queue. Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25bpf: Add AND verifier test case where 32bit and 64bit bounds differJohn Fastabend
If we AND two values together that are known in the 32bit subregs, but not known in the 64bit registers we rely on the tnum value to report the 32bit subreg is known. And do not use mark_reg_known() directly from scalar32_min_max_and() Add an AND test to cover the case with known 32bit subreg, but unknown 64bit reg. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-25bpf, verifier: Remove redundant var_off.value ops in scalar known reg casesJohn Fastabend
In BPF_AND and BPF_OR alu cases we have this pattern when the src and dst tnum is a constant. 1 dst_reg->var_off = tnum_[op](dst_reg->var_off, src_reg.var_off) 2 scalar32_min_max_[op] 3 if (known) return 4 scalar_min_max_[op] 5 if (known) 6 __mark_reg_known(dst_reg, dst_reg->var_off.value [op] src_reg.var_off.value) The result is in 1 we calculate the var_off value and store it in the dst_reg. Then in 6 we duplicate this logic doing the op again on the value. The duplication comes from the the tnum_[op] handlers because they have already done the value calcuation. For example this is tnum_and(). struct tnum tnum_and(struct tnum a, struct tnum b) { u64 alpha, beta, v; alpha = a.value | a.mask; beta = b.value | b.mask; v = a.value & b.value; return TNUM(v, alpha & beta & ~v); } So lets remove the redundant op calculation. Its confusing for readers and unnecessary. Its also not harmful because those ops have the property, r1 & r1 = r1 and r1 | r1 = r1. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-25Merge branch 'Devlink-regions-for-SJA1105-DSA-driver'David S. Miller
Vladimir Oltean says: ==================== Devlink regions for SJA1105 DSA driver This series exposes the SJA1105 static config as a devlink region. This can be used for debugging, for example with the sja1105_dump user space program that I have derived from Andrew Lunn's mv88e6xxx_dump: https://github.com/vladimiroltean/mv88e6xxx_dump/tree/sja1105 Changes in v2: - Tear down devlink params on initialization failure. - Add driver identification through devlink. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: implement .devlink_info_getVladimir Oltean
Return the driver name and ASIC ID so that generic user space application are able to know they're looking at sja1105 devlink regions when pretty-printing them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: expose static config as devlink regionVladimir Oltean
As explained in Documentation/networking/dsa/sja1105.rst, this switch has a static config held in the driver's memory and re-uploaded from time to time into the device (after any major change). The format of this static config is in fact described in UM10944.pdf and it contains all the switch's settings (it also contains device ID, table CRCs, etc, just like in the manual). So it is a useful and universal devlink region to expose to user space, for debugging purposes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net: dsa: sja1105: move devlink param code to sja1105_devlink.cVladimir Oltean
We'll have more devlink code soon. Group it together in a separate translation object. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25Merge branch 'drivers-net-warning-clean'David S. Miller
Jesse Brandeburg says: ==================== make drivers/net/ethernet W=1 clean The Goal: move to W=1 being default for drivers/net/ethernet, and then use automation to catch more code issues (warnings) being introduced. The status: Getting much closer but not quite done for all architectures. After applying the patches below, the drivers/net/ethernet directory can be built as modules with W=1 with no warnings (so far on x64_64 arch only!). As Jakub pointed out, there is much more work to do to clean up C=1, but that will be another series of changes. This series removes 1,247 warnings and hopefully allows the ethernet directory to move forward from here without more warnings being added. There is only one objtool warning now. This version drops one of the Intel patches, as I couldn't reproduce the original issue to document the warning. Some of these patches are already sent and tested on Intel Wired Lan, but the rest of the series titled drivers/net/ethernet affects other drivers. The changes are all pretty straightforward. ==================== Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeed@kernel.org>
2020-09-25drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25sfc: fix kdoc warningJesse Brandeburg
kernel-doc script as used by W=1, is confused by the macro usage inside the header describing the efx_ptp_data struct. drivers/net/ethernet/sfc/ptp.c:345: warning: Function parameter or member 'MC_CMD_PTP_IN_TRANSMIT_LENMAX' not described in 'efx_ptp_data' After some discussion on the list, break this patch out to a separate one, and fix the issue through a creative macro declaration. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: remove incorrectly formatted docJesse Brandeburg
As part of the W=1 series for ethernet, these drivers were discovered to be using kdoc style comments but were not actually doing kdoc. The kernel uses kdoc style when documenting code, not doxygen or other styles. Fixed Warnings: drivers/net/ethernet/amazon/ena/ena_com.c:613: warning: Function parameter or member 'ena_dev' not described in 'ena_com_set_llq' drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1540: warning: Cannot understand * @brief Set VLAN filter table drivers/net/ethernet/xilinx/ll_temac_main.c:114: warning: Function parameter or member 'lp' not described in 'temac_indirect_busywait' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'value' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'value' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'lp' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'reg' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'lp' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'reg' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'value' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'value' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'lp' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'op' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'np' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:300: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_release' drivers/net/ethernet/xilinx/ll_temac_main.c:330: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_init' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'ndev' not described in 'temac_setoptions' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'options' not described in 'temac_setoptions' Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: add some basic kdoc tagsJesse Brandeburg
A couple of drivers had a "generic documentation" section that would trigger a "can't understand" message from W=1 compiles. Fix by using correct DOC: tags in the generic sections. Fixed Warnings: drivers/net/ethernet/arc/emac_arc.c:4: info: Scanning doc for c drivers/net/ethernet/cadence/macb_pci.c:3: warning: missing initial short description on line: * Cadence GEM PCI wrapper. drivers/net/ethernet/cadence/macb_pci.c:3: info: Scanning doc for Cadence Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: handle one warning explicitlyJesse Brandeburg
While fixing the W=1 builds, this warning came up because the developers used a very tricky way to get structures initialized to a non-zero value, but this causes GCC to warn about an override. In this case the override was intentional, so just disable the warning for this code with a kernel macro that results in disabling the warning for compiles on GCC versions after 8. It is not appropriate to change the struct to initialize all the values as it will just add a lot more code for no value. The code is completely correct as is, we just want to acknowledge that this code could generate a warning and we're ok with that. NOTE: the __diag_ignore macro currently only accepts a second argument of 8 (version 80000), it's either use this one or open code the pragma. Fixed Warnings example (all the same): drivers/net/ethernet/renesas/sh_eth.c:51:12: warning: initialized field overwritten [-Woverride-init] drivers/net/ethernet/renesas/sh_eth.c:52:12: warning: initialized field overwritten [-Woverride-init] drivers/net/ethernet/renesas/sh_eth.c:53:13: warning: initialized field overwritten [-Woverride-init] + 256 more... Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: rid ethernet of no-prototype warningsJesse Brandeburg
The W=1 builds showed a few files exporting functions (non-static) that were not prototyped. What actually happened is that there were prototypes, but the include file was forgotten in the implementation file. Add the include file and remove the warnings. Fixed Warnings: drivers/net/ethernet/cavium/liquidio/cn68xx_device.c:124:5: warning: no previous prototype for ‘lio_setup_cn68xx_octeon_device’ [-Wmissing-prototypes] drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:159:1: warning: no previous prototype for ‘octeon_pci_read_core_mem’ [-Wmissing-prototypes] drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:168:1: warning: no previous prototype for ‘octeon_pci_write_core_mem’ [-Wmissing-prototypes] drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:176:5: warning: no previous prototype for ‘octeon_read_device_mem64’ [-Wmissing-prototypes] drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:185:5: warning: no previous prototype for ‘octeon_read_device_mem32’ [-Wmissing-prototypes] drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:194:6: warning: no previous prototype for ‘octeon_write_device_mem32’ [-Wmissing-prototypes] drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c:453:6: warning: no previous prototype for ‘hclge_dcb_ops_set’ [-Wmissing-prototypes] Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg
As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25intel: handle unused assignmentsJesse Brandeburg
Remove variables that were storing a return value from a register read or other read, where the return value wasn't used. Those conversions to remove the lvalue of the assignment should be safe because the readl memory mapped reads are marked volatile and should not be optimized out without an lvalue (I suspect a very long time ago this wasn't guaranteed as it is today). These changes are part of a separate patch to make it easier to review. Warnings Fixed: .../intel/e100.c:2596:9: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:101:6: warning: variable ‘icr_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:277:6: warning: variable ‘ctrl_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:952:15: warning: variable ‘temp_reg’ set but not used [-Wunused-but-set-variable] .../intel/ixgb/ixgb_hw.c:1164:7: warning: variable ‘mdio_reg’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:132:6: warning: variable ‘ret_val’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:380:6: warning: variable ‘icr’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2378:6: warning: variable ‘signal’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2374:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:2373:6: warning: variable ‘rxcw’ set but not used [-Wunused-but-set-variable] .../intel/e1000/e1000_hw.c:4678:15: warning: variable ‘temp’ set but not used [-Wunused-but-set-variable] Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25Merge branch 'enable-bpf_skc-cast-for-networking-progs'Alexei Starovoitov
Martin KaFai Lau says: ==================== This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct tcp_sock". Patch 2 has the details on the use case. v3: - Pass arg_btf_id instead of fn into check_reg_type() in Patch 1 (Lorenz) - Move arg_btf_id from func_proto to struct bpf_reg_types in Patch 2 (Lorenz) - Remove test_sock_fields from .gitignore in Patch 8 (Andrii) - Add tests to have better coverage on the modified helpers (Alexei) Patch 13 is added. - Use "void *sk" as the helper argument in UAPI bpf.h v3: - ARG_PTR_TO_SOCK_COMMON_OR_NULL was attempted in v2. The _OR_NULL was needed because the PTR_TO_BTF_ID could be NULL but note that a could be NULL PTR_TO_BTF_ID is not a scalar NULL to the verifier. "_OR_NULL" implicitly gives an expectation that the helper can take a scalar NULL which does not make sense in most (except one) helpers. Passing scalar NULL should be rejected at the verification time. Thus, this patch uses ARG_PTR_TO_BTF_ID_SOCK_COMMON to specify that the helper can take both the btf-id ptr or the legacy PTR_TO_SOCK_COMMON but not scalar NULL. It requires the func_proto to explicitly specify the arg_btf_id such that there is a very clear expectation that the helper can handle a NULL PTR_TO_BTF_ID. v2: - Add ARG_PTR_TO_SOCK_COMMON_OR_NULL (Lorenz) ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-25net: vlan: Avoid using BUG() in vlan_proto_idx()Florian Fainelli
While we should always make sure that we specify a valid VLAN protocol to vlan_proto_idx(), killing the machine when an invalid value is specified is too harsh and not helpful for debugging. All callers are capable of dealing with an error returned by vlan_proto_idx() so check the index value and propagate it accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25bpf: selftest: Add test_btf_skc_cls_ingressMartin KaFai Lau
This patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches: 1. bpf_sk_release() 2. bpf_sk_assign() 3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock() 4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000458.3859627-1-kafai@fb.com
2020-09-25bpf: selftest: Remove enum tcp_ca_state from bpf_tcp_helpers.hMartin KaFai Lau
The enum tcp_ca_state is available in <linux/tcp.h>. Remove it from the bpf_tcp_helpers.h to avoid conflict when the bpf prog needs to include both both <linux/tcp.h> and bpf_tcp_helpers.h. Modify the bpf_cubic.c and bpf_dctcp.c to use <linux/tcp.h> instead. The <linux/stddef.h> is needed by <linux/tcp.h>. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000452.3859313-1-kafai@fb.com
2020-09-25bpf: selftest: Use bpf_skc_to_tcp_sock() in the sock_fields testMartin KaFai Lau
This test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp". Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get(). It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id() with the "ktp". To do that, a parent cgroup and a child cgroup are created. The bpf prog is attached to the child cgroup. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000446.3858975-1-kafai@fb.com
2020-09-25bpf: selftest: Use network_helpers in the sock_fields testMartin KaFai Lau
This patch uses start_server() and connect_to_fd() from network_helpers.h to remove the network testing boiler plate codes. epoll is no longer needed also since the timeout has already been taken care of also. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000440.3858639-1-kafai@fb.com
2020-09-25bpf: selftest: Adapt sock_fields test to use skel and global variablesMartin KaFai Lau
skel is used. Global variables are used to store the result from bpf prog. addr_map, sock_result_map, and tcp_sock_result_map are gone. Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp, listen_sk, srv_sk, and cli_sk are added. Because of that, bpf_addr_array_idx and bpf_result_array_idx are also no longer needed. CHECK() macro from test_progs.h is reused and bail as soon as a CHECK failure. shutdown() is used to ensure the previous data-ack is received. The bytes_acked, bytes_received, and the pkt_out_cnt checks are using "<" to accommodate the final ack may not have been received/sent. It is enough since it is not the focus of this test. The sk local storage is all initialized to 0xeB9F now, so the check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to keep things simple. The next patch will reuse helpers from network_helpers.h to simplify things further. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000434.3858204-1-kafai@fb.com
2020-09-25bpf: selftest: Move sock_fields test into test_progsMartin KaFai Lau
This is a mechanical change to 1. move test_sock_fields.c to prog_tests/sock_fields.c 2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c Minimal change is made to the code itself. Next patch will make changes to use new ways of writing test, e.g. use skel and global variables. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000427.3857814-1-kafai@fb.com
2020-09-25bpf: selftest: Add ref_tracking verifier test for bpf_skc castingMartin KaFai Lau
The patch tests for: 1. bpf_sk_release() can be called on a tcp_sock btf_id ptr. 2. Ensure the tcp_sock btf_id pointer cannot be used after bpf_sk_release(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200925000421.3857616-1-kafai@fb.com
2020-09-25bpf: Change bpf_sk_assign to accept ARG_PTR_TO_BTF_ID_SOCK_COMMONMartin KaFai Lau
This patch changes the bpf_sk_assign() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON does not allow a literal NULL, so another ARG type is required for this purpose and another follow-up patch can be used if there is such need. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000415.3857374-1-kafai@fb.com
2020-09-25bpf: Change bpf_tcp_*_syncookie to accept ARG_PTR_TO_BTF_ID_SOCK_COMMONMartin KaFai Lau
This patch changes the bpf_tcp_*_syncookie() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200925000409.3856725-1-kafai@fb.com
2020-09-25bpf: Change bpf_sk_storage_*() to accept ARG_PTR_TO_BTF_ID_SOCK_COMMONMartin KaFai Lau
This patch changes the bpf_sk_storage_*() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. A micro benchmark has been done on a "cgroup_skb/egress" bpf program which does a bpf_sk_storage_get(). It was driven by netperf doing a 4096 connected UDP_STREAM test with 64bytes packet. The stats from "kernel.bpf_stats_enabled" shows no meaningful difference. The sk_storage_get_btf_proto, sk_storage_delete_btf_proto, btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are no longer needed, so they are removed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200925000402.3856307-1-kafai@fb.com
2020-09-25bpf: Change bpf_sk_release and bpf_sk_*cgroup_id to accept ↵Martin KaFai Lau
ARG_PTR_TO_BTF_ID_SOCK_COMMON The previous patch allows the networking bpf prog to use the bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer, e.g. "struct tcp_sock *". It allows the bpf prog to read all the fields of the tcp_sock. This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. For example, the following will work: sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0); if (!sk) return; tp = bpf_skc_to_tcp_sock(sk); if (!tp) { bpf_sk_release(sk); return; } lsndtime = tp->lsndtime; /* Pass tp to bpf_sk_release() will also work */ bpf_sk_release(tp); Since PTR_TO_BTF_ID could be NULL, the helper taking ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime. A btf_id of "struct sock" may not always mean a fullsock. Regardless the helper's running context may get a non-fullsock or not, considering fullsock check/handling is pretty cheap, it is better to keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID* will be able to handle the minisock situation. In the bpf_sk_*cgroup_id() case, it will try to get a fullsock by using sk_to_full_sk() as its skb variant bpf_sk"b"_*cgroup_id() has already been doing. bpf_sk_release can already handle minisock, so nothing special has to be done. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000356.3856047-1-kafai@fb.com
2020-09-25bpf: Enable bpf_skc_to_* sock casting helper to networking prog typeMartin KaFai Lau
There is a constant need to add more fields into the bpf_tcp_sock for the bpf programs running at tc, sock_ops...etc. A current workaround could be to use bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to do bpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from the tcp_sock. This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose func_proto returns a btf_id. For example, the func_proto of bpf_skc_to_tcp_sock returns the btf_id of the kernel "struct tcp_sock". These helpers are also added to is_ptr_cast_function(). It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id. That will keep the ref-tracking works properly. The bpf_skc_to_* helpers are made available to most of the bpf prog types in filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap. This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will accept pointer obtained from skb->sk. Instead of specifying both arg_type and arg_btf_id in the same func_proto which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is always the same. Discussion in this thread: https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/ The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is expecting a PTR_TO_BTF_ID which could be NULL. This is the same behavior as the existing helper taking ARG_PTR_TO_BTF_ID. The _SOCK_COMMON part means the helper is also expecting the legacy SOCK_COMMON pointer. By excluding the _OR_NULL part, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load. [ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take the PTR_TO_BTF_ID returned by the bpf_skc_to_*() helpers. The only special case is bpf_sk_lookup_assign() which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ] [ When converting the older helpers that take ARG_PTR_TO_SOCK* in the later patch, if the kernel does not support BTF, ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON because no reg->type could have PTR_TO_BTF_ID in this case. It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ] Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000350.3855720-1-kafai@fb.com
2020-09-25bpf: Move the PTR_TO_BTF_ID check to check_reg_type()Martin KaFai Lau
check_reg_type() checks whether a reg can be used as an arg of a func_proto. For PTR_TO_BTF_ID, the check is actually not completely done until the reg->btf_id is pointing to a kernel struct that is acceptable by the func_proto. Thus, this patch moves the btf_id check into check_reg_type(). "arg_type" and "arg_btf_id" are passed to check_reg_type() instead of "compatible". The compatible_reg_types[] usage is localized in check_reg_type() now. The "if (!btf_id) verbose(...); " is also removed since it won't happen. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000344.3854828-1-kafai@fb.com
2020-09-25Merge tag 'wireless-drivers-next-2020-09-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 Second set of patches for v5.10. Biggest change here is wcn3680 support to wcn36xx driver, otherwise smaller features. And naturally the usual fixes and cleanups. Major changes: brcmfmac * support 4-way handshake offloading for WPA/WPA2-PSK in AP mode * support SAE authentication offload in AP mode mt76 * mt7663 runtime power management improvements * mt7915 A-MSDU offload wcn36xx * add support wcn3680 Wi-Fi 5 devices ath11k * spectral scan support for ipq6018 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25Bluetooth: MGMT: Fix not checking if BT_HS is enabledLuiz Augusto von Dentz
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead of always reporting it as supported. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: Disable High Speed by defaultLuiz Augusto von Dentz
Bluetooth High Speed requires hardware support which is very uncommon nowadays since HS has not pickup interest by the industry. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channelLuiz Augusto von Dentz
Only sockets will have the chan->data set to an actual sk, channels like A2MP would have its own data which would likely cause a crash when calling sk_filter, in order to fix this a new callback has been introduced so channels can implement their own filtering if necessary. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: A2MP: Fix not initializing all membersLuiz Augusto von Dentz
This fixes various places where a stack variable is used uninitialized. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25ath11k: fix undefined reference to 'ath11k_debugfs_htt_ext_stats_handler'Kalle Valo
kbuild bot reported than link fails when CONFIG_ATH11K_DEBUGFS is disabled: drivers/net/wireless/ath/ath11k/dp_rx.c:1662: undefined reference to `ath11k_debugfs_htt_ext_stats_handler' This was because I had missed to move the static inline version of the function (which are used when CONFIG_ATH11K_DEBUGFS is disabled) to debufs_htt_stats.h. Also move ath11k_debugfs_htt_stats_req() at the same time. And create a stub also for ath11k_debugfs_htt_stats_init() for consistency, even if it's not needed. Reported-by: kernel test robot <lkp@intel.com> Fixes: 568f06036ee2 ("ath11k: debugfs: move some function declarations to correct header files") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601024241-16594-1-git-send-email-kvalo@codeaurora.org
2020-09-25Bluetooth: Fix update of own_addr_type if ll_privacy supportedSathish Narasimman
During system powercycle when trying to get the random address hci_get_random_address set own_addr_type as 0x01. In which if we enable ll_privacy it is supposed to be 0x03. Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-24Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: updates for -next There are some updates for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: rename macro of pci device id of vfGuangbin Huang
VF devices do not have speed division, its speed is depended on its PF. So macro name of PCI device id of VF is incorrent to have 100G info, it should be renamed by removing 100G info. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: add support for 200G deviceGuangbin Huang
The 200G device has a new device id 0xA228, so adds this device id to pci table, then the driver can probe it. As speed_ability queried from firmware has only 8 bits and already be used up, so firmware adds extra speed_ability_ext to indicate more speed abilities to support 200G and driver needs to parse it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: add debugfs of dumping pf interrupt resourcesYufeng Mo
The pf's interrupt resources will be changed with the number of enabled pf. Dumping this resource information will be helpful for debugging. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: add a hardware error detect typeYufeng Mo
In hns3_process_hw_error(), the hardware error detection of the ROCEE AXI RESP error type is added. When this error occurs, the client needs to be notified of this error and take corresponding operation. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: remove unnecessary variable initializationYufeng Mo
If a variable is assigned a value before it is used, it's no need to assign an initial value to the variable. So remove these redundant operations. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: hns3: refactor the function for dumping tc information in debugfsYufeng Mo
Remove some unnecessary parameters of hclge_title_idx_print(), and rename this function for readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24net: tcp: drop unused function argument from mptcp_incoming_optionsFlorian Westphal
Since commit cfde141ea3faa30e ("mptcp: move option parsing into mptcp_incoming_options()"), the 3rd function argument is no longer used. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24Merge branch 'mptcp-RM_ADDR-ADD_ADDR-enhancements'David S. Miller
Geliang Tang says: ==================== mptcp: RM_ADDR/ADD_ADDR enhancements This series include two enhancements for the MPTCP path management, namely RM_ADDR support and ADD_ADDR echo support, as specified by RFC sections 3.4.1 and 3.4.2. 1 RM_ADDR support include 9 patches (1-3 and 8-13): Patch 1 is the helper for patch 2, these two patches add the RM_ADDR outgoing functions, which are derived from ADD_ADDR's corresponding functions. Patch 3 adds the RM_ADDR incoming logic, when RM_ADDR suboption is received, close the subflow matching the rm_id, and update PM counter. Patch 8 is the main remove routine. When the PM netlink removes an address, we traverse all the existing msk sockets to find the relevant sockets. Then trigger the RM_ADDR signal and remove the subflow which using this local address, this subflow removing functions has been implemented in patch 9. Finally, patches 10-13 are the self-tests for RM_ADDR. 2 ADD_ADDR echo support include 7 patches (4-7 and 14-16). Patch 4 adds the ADD_ADDR echo logic, when the ADD_ADDR suboption has been received, send out the same ADD_ADDR suboption with echo-flag, and no HMAC included. Patches 5 and 6 are the self-tests for ADD_ADDR echo. Patch 7 is a little cleaning up. Patch 14 and 15 are the helpers for patch 16. These three patches add the ADD_ADDR retransmition when no ADD_ADDR echo is received. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24mptcp: retransmit ADD_ADDR when timeoutGeliang Tang
This patch implemented the retransmition of ADD_ADDR when no ADD_ADDR echo is received. It added a timer with the announced address. When timeout occurs, ADD_ADDR will be retransmitted. Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 13:34:35 +0000