summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-21Merge tag 'mac80211-next-for-net-next-2020-09-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * some AP-side infrastructure for FILS discovery and unsolicited probe resonses * a major rework of the encapsulation/header conversion offload from Felix, to fit better with e.g. AP_VLAN interfaces * performance fix for VHT A-MPDU size, don't limit to HT * some initial patches for S1G (sub 1 GHz) support, more will come in this area * minor cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge tag 'mac80211-for-net-2020-09-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * fix using HE on 2.4 GHz * AQL (airtime queue limit) estimation & VHT160 fix * do not oversize A-MPDUs if local capability is smaller than peer's * fix radiotap on 6 GHz to not put 2.4 GHz flag * fix Kconfig for lib80211 * little fixlet for 6 GHz channel number / frequency conversion ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: natsemi: Remove set but not used variableZheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/natsemi/ns83820.c: In function ns83820_get_link_ksettings: drivers/net/ethernet/natsemi/ns83820.c:1210:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] `tanar` is never used, so remove it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21ipv6: route: convert comma to semicolonXu Wang
Replace a comma between expression statements by a semicolon. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: unix: remove redundant assignment to variable 'err'Jing Xiangfeng
After commit 37ab4fa7844a ("net: unix: allow bind to fail on mutex lock"), the assignment to err is redundant. So remove it. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: phy: realtek: enable ALDPS to save power for RTL8211FJisheng Zhang
Enable ALDPS(Advanced Link Down Power Saving) to save power when link down. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: rtl8366rb: Support all 4096 VLANsLinus Walleij
There is an off-by-one error in rtl8366rb_is_vlan_valid() making VLANs 0..4094 valid while it should be 1..4095. Fix it. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: mt7530: Add some return-value checksAlex Dewar
In mt7531_cpu_port_config(), if the variable port is neither 5 nor 6, then variable interface will be used uninitialised. Change the function to return -EINVAL in this case. As the return value of mt7531_cpu_port_config() is never checked (even though it returns an int) add a check in the correct place so that the error can be passed up the call stack. Now that we correctly handle errors thrown in this function, also check the return value of mt7531_mac_config() in case an error occurs here. Also add misisng checks to mt7530_setup() and mt7531_setup(), which are another level further up the call stack. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Addresses-Coverity: 1496993 ("Uninitialized variables") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net-sysfs: add backlog len and CPU id to softnet dataPaolo Abeni
Currently the backlog status in not exposed to user-space. Since long backlogs (or simply not empty ones) can be a source of noticeable latency, -RT deployments need some way to inspect it. Additionally, there isn't a direct match between 'softnet_stat' lines and the related CPU - sd for offline CPUs are not dumped - so this patch also includes the CPU id into such entry. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21sfc: Fix error code in probeDan Carpenter
This failure path should return a negative error code but it currently returns success. Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge branch 'Update-license-and-polish-ENA-driver-code'David S. Miller
Shay Agroskin says: ==================== Update license and polish ENA driver code This series adds the following: - Change driver's license into SPDX format - Capitalize all log prints in ENA driver - Fix issues raised by static checkers - Improve code readability by adding functions, fix spelling mistakes etc. - Update driver's documentation Changed from previous version: v1->v2: dropped patch that transforms pr_* log prints into dev_* prints ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: update ena documentationShay Agroskin
The PCI vendor IDs in the documentation inaccurately describe the ENA devices. For example, the 1d0f:ec20 can have LLQ support. The driver loads in LLQ mode by default, and a message is printed to the kernel ring if the mode isn't supported by the device, so the device table isn't needed. Also, LLQ can support various entry sizes, so the documentation is updated to reflect that. Interrupt moderation description is also updated to be more accurate. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Fix all static chekers' warningsShay Agroskin
After running Sparse checker on the driver using make C=1 M=drivers/net/ethernet/amazon/ena the only error that is thrown is: sparse: sparse: Using plain integer as NULL pointer about the line struct ena_calc_queue_size_ctx calc_queue_ctx = { 0 }; This patch fixes this warning, thus making our driver free (for now) of Sparse errors/warnings. To make a more complete work, this patch also fixes all static warnings that were found using an internal static checker. Signed-off-by: Ido Segev <idose@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Change RSS related macros and variables namesShay Agroskin
The formal name changes to "ENA_ADMIN_RSS_INDIRECTION_TABLE_CONFIG". Indirection is the ability to reference "something" using "something else" instead of the value itself. Indirection table, as the name implies, is the ability to reference CPU/Queue value using hash-to-CPU table instead of CPU/Queue itself. This patch renames the variable keys_num, which describes the number of words in the RSS hash key, to key_parts which makes its purpose clearer in RSS context. Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Remove redundant print of placement policyShay Agroskin
The placement policy is printed in the process of queue creation in ena_up(). No need to print it in ena_probe(). Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Capitalize all log strings and improve code readabilityShay Agroskin
Capitalize all log strings printed by the ena driver to make their format uniform across it. Also fix indentation, spelling mistakes and comments to improve code readability. This also includes adding comments to macros/enums whose purpose might be difficult to understand. Separate some code into functions to make it easier to understand the purpose of these lines. Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Change log message to netif/dev functionShay Agroskin
Make log prints in ena_netdev use the same log functions as the rest of the driver. For the sake of consistency, all prints in ena_netdev file were converted into netif_* format except where netdev struct isn't yet defined. For these places, dev_* log functions are used (similar to the patch for ena_com files). This commit leaves some corner cases which would be changed in a future patch. Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: ena: Change license into format to SPDX in all filesShay Agroskin
All ena files should now use SPDX format in their license string. This doesn't change the license of the files, but rather states the same license in fewer words. Also update the license years in some of the files. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21chelsio: simplify the return expression of t3_ael2020_phy_prep()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21connector: simplify the return expression of cn_add_callback()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21enetc: simplify the return expression of enetc_vf_set_mac_addr()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21ice: simplify the return expression of ice_finalize_update()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21mlxsw: spectrum_router: simplify the return expression of ↵Qinglang Miao
__mlxsw_sp_router_init() Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: hns3: simplify the return expression of hclgevf_client_start()Qinglang Miao
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: qlcnic: simplify the return expression of qlcnic_83xx_shutdownQinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge branch 'rcu/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This contains a single commit that fixes a bug that was introduced in the last merge window. This bug causes a compiler warning complaining about show_rcu_tasks_classic_gp_kthread() being an unused static function in !SMP kernels. The fix is straightforward, just adding an 'inline' to make this a static inline function, thus avoiding the warning. This bug was reported by Laurent Pinchart, who would like it fixed sooner rather than later" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
2020-09-21bpf: Fix potential call bpf_link_free() in atomic contextMuchun Song
The in_atomic() macro cannot always detect atomic context, in particular, it cannot know about held spinlocks in non-preemptible kernels. Although, there is no user call bpf_link_put() with holding spinlock now, be on the safe side, so we can avoid this in the future. Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200917074453.20621-1-songmuchun@bytedance.com
2020-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - fix fault on page table writes during instruction fetch s390: - doc improvement x86: - The obvious patches are always the ones that turn out to be completely broken. /me hangs his head in shame" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Revert "KVM: Check the allocation of pv cpu mask" KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite() KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch docs: kvm: add documentation for KVM_CAP_S390_DIAG318
2020-09-21Merge tag 'libnvdimm-fixes-5.9-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "Fix compilation for the new dax_supported() exported helper" * tag 'libnvdimm-fixes-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX
2020-09-21dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAXJan Kara
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-21io_uring: fix openat/openat2 unified prep handlingJens Axboe
A previous commit unified how we handle prep for these two functions, but this means that we check the allowed context (SQPOLL, specifically) later than we should. Move the ring type checking into the two parent functions, instead of doing it after we've done some setup work. Fixes: ec65fea5a8d7 ("io_uring: deduplicate io_openat{,2}_prep()") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: mark statx/files_update/epoll_ctl as non-SQPOLLJens Axboe
These will naturally fail when attempted through SQPOLL, but either with -EFAULT or -EBADF. Make it explicit that these are not workable through SQPOLL and return -EINVAL, just like other ops that need to use ->files. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21tools/io_uring: fix compile breakageDouglas Gilbert
It would seem none of the kernel continuous integration does this: $ cd tools/io_uring $ make Otherwise it may have noticed: cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o io_uring-bench.c io_uring-bench.c:133:12: error: static declaration of ‘gettid’ follows non-static declaration 133 | static int gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from io_uring-bench.c:27: /usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ make: *** [<builtin>: io_uring-bench.o] Error 1 The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h already defines gettid(). So prefix the local definition with "lk_". Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't use retry based buffered reads for non-async bdevJens Axboe
Some block devices, like dm, bubble back -EAGAIN through the completion handler. We check for this in io_read(), but don't honor it for when we have copied the iov. Return -EAGAIN for this case before retrying, to force punt to io-wq. Fixes: bcf5a06304d6 ("io_uring: support true async buffered reads, if file provides it") Reported-by: Zorro Lang <zlang@redhat.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't re-setup vecs/iter in io_resumit_prep() is already thereJens Axboe
If we already have mapped the necessary data for retry, then don't set it up again. It's a pointless operation, and we leak the iovec if it's a large (non-stack) vec. Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21wcn36xx: Remove dead code in wcn36xx_smd_config_bss()Bryan O'Donoghue
wcn36xx_smd_config_bss_v0() and wcn36xx_smd_config_bss_v1() have been designed to operate in standalone fashion. As a result we can drop the dead code now present in wcn36xx_smd_config_bss() and happily remove one kzalloc from the BSS config path as we do so. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-8-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Convert to using wcn36xx_smd_config_bss_v0()Bryan O'Donoghue
A previous patch added wcn36xx_smd_config_bss_v0() this patch converts the version 0 data-path in wcn36xx_smd_config_bss() to use wcn36xx_smd_config_bss_v0(). Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-7-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_config_bss_v0Bryan O'Donoghue
This commit adds wcn36xx_smd_config_bss_v0() as a step along the road of functionally decomposing wcn36xx_smd_config_bss(). Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internallyBryan O'Donoghue
This patch updates wcn36xx_smd_config_bss_v1() to update on internally derived parameters only, specifically making use of STA v1 wrapper routines previously added. Once done we no longer need to pass a struct wcn36xx_hal_config_bss_req_msg which gives us options in later patches to eliminate the kzalloc() in wcn36xx_smd_config_bss entirely. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()Bryan O'Donoghue
This commit moves BSS parameter setup to a separate function wcn36xx_smd_set_bss_params(). This will allow for further functional decomposition and fewer kzalloc() operations in subsequent patches. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()Bryan O'Donoghue
In order to facilitate functional decomposition of wcn36xx_smd_config_bss() we need to move wcn36xx_smd_set_sta_params() later in function. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Functionally decompose wcn36xx_smd_config_sta()Bryan O'Donoghue
This commit functionally decomposes wcn36xx_smd_config_sta into a clearly defined wcn36xx_smd_config_sta_v0 and wcn36xx_smd_config_sta_v1 path. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()Bryan O'Donoghue
This commit adds a wrapper function wcn36xx_smd_set_sta_params_v1() which calls into wcn36xx_smd_set_sta_params() and then subsequently sets version-1 specific parameters. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-8-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_bss_vht_params()Bryan O'Donoghue
This commit adds wcn36xx_smd_set_bss_vht_params(). The job of this function is to decide if the BSS is VHT capable and if so set the appropriate bit in the BSS parameter structure for passing to the firmware. VHT Channel width set is not set since we don't support 160MHz. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-7-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()Bryan O'Donoghue
Adds a routine to allow setting the LDPC bit for HT parameter passing inside the version 1 STA parameters data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_vht_params()Bryan O'Donoghue
This commit adds support for setting VHT parameters based on the declared VHT capability bits in the VHT capability structure. We cannot do 160MHz so VHT Channel width set should be zero. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()Bryan O'Donoghue
Toggling the LDPC enabled bit is possible only via the extended V1 data-structure. This function provides a means of setting the default depending on chip-type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()Bryan O'Donoghue
This commit adds support for setting default VHT parameters, which are exposed by the extended version 1 STA parameter type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_set_default_rates_v1Bryan O'Donoghue
Add a routine to set some additional default parameters associated with the V1 data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Use V1 data structure to store supported ratesBryan O'Donoghue
This patch converts the internal data structure used to store data-rates from version 0 to version 1. This allows us to extend out the internal storage to represent VHT parameters. Using the extended version 1 data-structure allows us to avoid a whole raft of version 1 specific fixup functions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-3-bryan.odonoghue@linaro.org
generated by cgit (git 2.34.1) at 2025-09-14 10:25:59 +0000