summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-14USB: gpio_vbus: fix inconsistent 'dev_id' parameters at free_irq()Shinya Kuribayashi
'dev_id' has to be the same with the one passed to request_irq(). Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14usb: Kconfig: remove unneeded default valueDavid Herrmann
If no default value is specified, then 'n' is used so the default value used here is not needed. Furthermore, we should never change default values depending on EXPERT mode. EXPERT mode should only make options visible, not change them. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14USB: ohci-omap: Use usb_put_transceiver instead of put_deviceJarkko Nikula
Currently usb_put_transceiver calls put_device so this is a no-op but it is better to keep API usage consistent as ohci->transceiver is allocated with usb_get_transceiver. While at there remove one extra ohci->transceiver test as the code block has already tested it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14USB: ehci-fsl: Use usb_put_transceiver instead of put_deviceJarkko Nikula
Currently usb_put_transceiver calls put_device so this is a no-op but it is better to keep API usage consistent as ehci->transceiver is allocated with usb_get_transceiver. While at there remove one extra ehci->transceiver test as the code block has already tested it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12Linux 3.4-rc7v3.4-rc7Linus Torvalds
.. and this should hopefully be the last -rc before final 3.4 release.
2012-05-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers
2012-05-12Merge branch 'v3.4-samsung-fixes-5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board
2012-05-13ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1Kukjin Kim
It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: EXYNOS: use s5p-timer for UniversalC210 boardMarek Szyprowski
Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki: "[...] urgent fixes for Renesas ARM-based platforms. Four of these commits are fixes of regressions new in 3.4-rc and the last one is necessary for SMP to work on those systems in general." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12ARM / mach-shmobile: Invalidate caches when booting secondary coresMagnus Damm
Make sure L1 caches are invalidated when booting secondary cores. Needed to boot all mach-shmobile SMP systems that are using Cortex-A9 including sh73a0, r8a7779 and EMEV2. Thanks to imx and tegra guys for actual code. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM / mach-shmobile: sh73a0 SMP TWD boot regression fixKuninori Morimoto
Fix SMP TWD boot regression on sh73a0 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on sh73a0 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. This patch removed shmobile_twd_init() which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM / mach-shmobile: r8a7779 SMP TWD boot regression fixMagnus Damm
Fix SMP TWD boot regression on r8a7779 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on r8a7779 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helperGuennadi Liakhovetski
This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd': pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helperGuennadi Liakhovetski
This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd': pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor qla and virto fixes plus one major regression fix (oops in all legacy host drivers)." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio_scsi: fix TMF use-after-free [SCSI] fix oops in all legacy host adapters caused by 6f381fa [SCSI] qla2xxx: Update version number to 8.04.00.03-k. [SCSI] qla2xxx: Properly check for current state after the fabric-login request. [SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy. [SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx. [SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request.
2012-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ...
2012-05-12Merge tag 'dm-3.4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes from Alasdair G Kergon: "Fix a couple of serious memory leaks in device-mapper thin provisioning and tidy its MODULE_DESCRIPTION. Mitigate occasional reported hangs associated with multipath scsi_dh module loading." * tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton
2012-05-12MAINTAINERS: Add myself as the cpufreq maintainerRafael J. Wysocki
Since cpufreq has no official maintainer at the moment, I'm willing to maintain it along some other power management core code I've been maintaining already. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-12dm mpath: check if scsi_dh module already loaded before trying to loadMike Snitzer
If the requested scsi_dh module is already loaded then skip request_module(). Multipath table loads can hang in an unnecessary __request_module. Reported-by: Ben Marzinski <bmarzins@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-12dm thin: correct module descriptionAlasdair G Kergon
Remove duplicate copy of string "device-mapper" (DM_NAME) from MODULE_DESCRIPTION. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-12dm thin: fix unprotected use of prepared_discards listMike Snitzer
Fix two places in commit 104655fd4dce ("dm thin: support discards") that didn't use pool->lock to protect against concurrent changes to the prepared_discards list. Without this fix, thin_endio() can race with process_discard(), leading to concurrent list_add()s that result in the processes locking up with an error like the following: WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0() ... list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0). ... Pid: 17205, comm: kworker/u:1 Tainted: G W O 3.4.0-rc3.snitm+ #1 Call Trace: [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50 [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool] [<ffffffff8124ff3f>] __list_add+0x8f/0xa0 [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool] [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool] [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool] [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool] [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool] [<ffffffff81056fa9>] process_one_work+0x129/0x450 [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0 [<ffffffff81059a20>] ? manage_workers+0x120/0x120 [<ffffffff8105eabe>] kthread+0x9e/0xb0 [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff814ceda0>] ? gs_change+0x13/0x13 ---[ end trace 7e0a523bc5e52692 ]--- Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-12dm thin: reinstate missing mempool_free in cell_release_singletonMike Snitzer
Fix a significant memory leak inadvertently introduced during simplification of cell_release_singleton() in commit 6f94a4c45a6f744383f9f695dde019998db3df55 ("dm thin: fix stacked bi_next usage"). A cell's hlist_del() must be accompanied by a mempool_free(). Use __cell_release() to do this, like before. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-11gpio/exynos: Fix compiler warnings when non-exynos machines are selectedSachin Kamat
Fixes the following compiler warnings: drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’: drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable] drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-11gpio: pch9: Use proper flow type handlersThomas Gleixner
Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-11usb: move struct usb_device->children to struct usb_hub_port->childLan Tianyu
Move child's pointer to the struct usb_hub_port since the child device is directly associated with the port. Provide usb_get_hub_child_device() to get child's pointer. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: add struct usb_hub_port to store port related members.Lan Tianyu
Add struct usb_hub_port pointer port_data in the struct usb_hub and allocate struct usb_hub_port perspectively for each ports to store private data. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: Set device removable state based on ACPI USB dataMatthew Garrett
ACPI offers two methods that allow us to infer whether or not a USB port is removable. The _PLD method gives us information on whether the port is "user visible" or not. If that's not present then we can fall back to the _UPC method which tells us whether or not a port is connectable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: Bind devices to ACPI devices when possibleMatthew Garrett
Built-in USB devices will typically have a representation in the system ACPI tables. Add support for binding the two together so the USB code can make use of the associated methods. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11ACPI: Add _PLD supportMatthew Garrett
Add a simple helper function to allow drivers to obtain the physical device location data. Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11ACPI: Add stubs for (un)register_acpi_bus_typeMatthew Garrett
It's unreasonable to have CONFIG_ACPI for these in drivers, so add some stub functions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11MAINTAINERS: Add an entry for ChipIdea USB driverAlexander Shishkin
Now that the ChipIdea driver and related platform code has its own location in the kernel and more contributions from the interested parties are anticipated, add a new maintainer for it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: remove langwell_udcAlexander Shishkin
We have the chipidea driver now that supports both langwell and penwell, so there is no need for this one any more. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: drop unused field "device" from ci13xxx_epAlexander Shishkin
It was used as a shorthand for gadget's device in request mapping/unmapping code, but now it's not used any more. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: use generic map/unmap routinesAlexander Shishkin
We're one of the remaining drivers to map/unmap requests by hand. Switch to using generic gadget routines for that instead. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add power_budget limit for ehci to platform dataAlexander Shishkin
Some implementations need this limitation to work correctly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull GPIO omap bug fix from Grant Likely. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/omap: fix incorrect initialization of omap_gpio_mod_init
2012-05-11Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull another powerpc irq fix from Benjamin Herrenschmidt: "It looks like my previous fix for the lazy irq masking problem wasn't quite enough. There was another problem related to performance monitor interrupts acting as NMIs leaving the flags in an incorrect state. Here's a fix that finally seems to make perf solid again." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/irq: Fix another case of lazy IRQ state getting out of sync
2012-05-11usb: chipidea: add host roleAlexander Shishkin
This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: use common definition for USBMODE bitsAlexander Shishkin
Some of the bits of USBMODE register are defined in <usb/ehci_def.h>, use them instead of having our own definitions. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: drop unused msm register definitionsAlexander Shishkin
These definitions are unused, and the same registers are also defined in <linux/usb/msm_hsusb_hw.h>. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: drop redundant NULL checkAlexander Shishkin
Currently, gadget can't be NULL in _gadget_stop_activity(). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: isr_reset_handler fix missing lockingMichael Grzeschik
Move spin_lock under the done label, so the lock will also be pulled in the error paths. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [rebased on top of the patchset] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: brush up structure definitionsAlexander Shishkin
Get rid of trailing comments in the structure definitions in favor of kernel-doc. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: remove unused field "regs" from ci13xxxAlexander Shishkin
The old implementation used global hw_bank, the new implementation uses udc-local hw_bank. This field seems to be a leftover from previous coding experiments. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add support for rolesAlexander Shishkin
Add some generic code for roles and implement simple role switching based on ID pin state and/or a sysfs file. At this, we also rename the device to ci_hdrc, which is what it is. The "manual" switch is made into a sysfs file and not debugfs, because it might be useful even in non-debug context. For some boards, like sheevaplug, it seems to be the only way to switch roles without modifying the hardware, since the ID pin is always grounded. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: split the driver code into unitsAlexander Shishkin
Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11Merge branch '3.4-urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fix from Nicholas Bellinger: "This patch removes some incorrect legacy code to free se_lun_acl memory in the NodeACL release path that could potentially trigger an OOPS during shutdown once dynamic -> explicit initiator NodeACL conversion has occurred. That said, we've been able to trigger an OOPS in v4.0 code for this special case when the associated MappedLUNs had not also been made explicit based on active TPG LUN layout during the conversion, so it really makes senses to go ahead and drop this extra cruft to avoid any possible issues here. This ends up only effecting iscsi-target module code (it's the only user) and is CC'ed to stable." * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion
2012-05-11usb: move ci13xxx and related code to drivers/usb/chipideaAlexander Shishkin
Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-25 02:49:44 +0000