summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-30nfp: flower: offload phys port MTU changeJohn Hurley
Trigger a port mod message to request an MTU change on the NIC when any physical port representor is assigned a new MTU value. The driver waits 10 msec for an ack that the FW has set the MTU. If no ack is received the request is rejected and an appropriate warning flagged. Rather than maintain an MTU queue per repr, one is maintained per app. Because the MTU ndo is protected by the rtnl lock, there can never be contention here. Portmod messages from the NIC are also protected by rtnl so we first check if the portmod is an ack and, if so, handle outside rtnl and the cmsg work queue. Acks are detected by the marking of a bit in a portmod response. They are then verfied by checking the port number and MTU value expected by the app. If the expected MTU is 0 then no acks are currently expected. Also, ensure that the packet headroom reserved by the flower firmware is considered when accepting an MTU change on any repr. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30nfp: modify app MTU setting callbacksJohn Hurley
Rename the 'change_mtu' app callback to 'check_mtu'. This is called whenever an MTU change is requested on a netdev. It can reject the change but is not responsible for implementing it. Introduce a new 'repr_change_mtu' app callback that is hit when the MTU of a repr is to be changed. This is responsible for performing the MTU change and verifying it. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge branch 'phylink-API-changes'David S. Miller
Florian Fainelli says: ==================== phylink: API changes This patch series contains two API changes to PHYLINK which will later be used by DSA to migrate to PHYLINK. Because these are API changes that impact other outstanding work (e.g: MVPP2) I would rather get them included sooner to minimize conflicts. Thank you! Changes in v2: - added missing documentation to mac_link_{up,down} that the interface must be configured in mac_config() - added Russell's, Andrew's and my tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30sfp/phylink: move module EEPROM ethtool access into netdev core ethtoolRussell King
Provide a pointer to the SFP bus in struct net_device, so that the ethtool module EEPROM methods can access the SFP directly, rather than needing every user to provide a hook for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: phy: phylink: Provide PHY interface to mac_link_{up, down}Florian Fainelli
In preparation for having DSA transition entirely to PHYLINK, we need to pass a PHY interface type to the mac_link_{up,down} callbacks because we may have to make decisions on that (e.g: turn on/off RGMII interfaces etc.). We do not pass an entire phylink_link_state because not all parameters (pause, duplex etc.) are defined when the link is down, only link and interface are. Update mvneta accordingly since it currently implements phylink_mac_ops. Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30atm: iphase: fix spelling mistake: "Receiverd" -> "Received"Colin Ian King
Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30MAINTAINERS: update vmxnet3 driver maintainerRonak Doshi
Shrikrishna Khare would no longer maintain the vmxnet3 driver. Taking over the role of vmxnet3 maintainer. Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge branch 'net-Broadcom-drivers-coalescing-fixes'David S. Miller
Florian Fainelli says: ==================== net: Broadcom drivers coalescing fixes Following Tal's review of the adaptive RX/TX coalescing feature added to the SYSTEMPORT and GENET driver a number of things showed up: - adaptive TX coalescing is not actually a good idea with the current way the estimator will program the ring, this results in a higher CPU load, NAPI on TX already does a reasonably good job at maintaining the interrupt count low - both SYSTEMPORT and GENET would suffer from the same issues while configuring coalescing parameters where the values would just not be applied correctly based on user settings, so we fix that too Tal, thanks again for your feedback, I would appreciate if you could review that the new behavior appears to be implemented correctly. Thanks! Changes in v2: - added Tal's reviewed-by to the first patch - split DIM initialization from coalescing parameters initialization - avoid duplicating the same code in bcmgenet_set_coalesce() when configuring RX rings - fixed the condition where default DIM parameters would be applied when adaptive RX coalescing would be enabled, do this only if it was disabled before ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: bcmgenet: Fix coalescing settings handlingFlorian Fainelli
There were a number of issues with setting the RX coalescing parameters: - we would not be preserving values that would have been configured across close/open calls, instead we would always reset to no timeout and 1 interrupt per packet, this would also prevent DIM from setting its default usec/pkts values - when adaptive RX would be turned on, we woud not be fetching the default parameters, we would stay with no timeout/1 packet per interrupt until the estimator kicks in and changes that - finally disabling adaptive RX coalescing while providing parameters would not be honored, and we would stay with whatever DIM had previously determined instead of the user requested parameters Fixes: 9f4ca05827a2 ("net: bcmgenet: Add support for adaptive RX coalescing") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: systemport: Fix coalescing settings handlingFlorian Fainelli
There were a number of issues with setting the RX coalescing parameters: - we would not be preserving values that would have been configured across close/open calls, instead we would always reset to no timeout and 1 interrupt per packet, this would also prevent DIM from setting its default usec/pkts values - when adaptive RX would be turned on, we woud not be fetching the default parameters, we would stay with no timeout/1 packet per interrupt until the estimator kicks in and changes that - finally disabling adaptive RX coalescing while providing parameters would not be honored, and we would stay with whatever DIM had previously determined instead of the user requested parameters Fixes: b6e0e875421e ("net: systemport: Implement adaptive interrupt coalescing") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: systemport: Remove adaptive TX coalescingFlorian Fainelli
Adaptive TX coalescing is not currently giving us any advantages and ends up making the CPU spin more frequently until TX completion. Deny and disable adaptive TX coalescing for now and rely on static configuration, we can always add it back later. Reviewed-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: Call add/kill vid ndo on vlan filter feature togglingGal Pressman
NETIF_F_HW_VLAN_[CS]TAG_FILTER features require more than just a bit flip in dev->features in order to keep the driver in a consistent state. These features notify the driver of each added/removed vlan, but toggling of vlan-filter does not notify the driver accordingly for each of the existing vlans. This patch implements a similar solution to NETIF_F_RX_UDP_TUNNEL_PORT behavior (which notifies the driver about UDP ports in the same manner that vids are reported). Each toggling of the features propagates to the 8021q module, which iterates over the vlans and call add/kill ndo accordingly. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30cxgb4: fix error return code in adap_init0()Wei Yongjun
Fix to return a negative error code from the hash filter init error handling case instead of 0, as done elsewhere in this function. Fixes: 5c31254e35a8 ("cxgb4: initialize hash-filter configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30netfilter: ipset: Use is_zero_ether_addr instead of static and memcmpJoe Perches
To make the test a bit clearer and to reduce object size a little. Miscellanea: o remove now unnecessary static const array $ size ip_set_hash_mac.o* text data bss dec hex filename 22822 4619 64 27505 6b71 ip_set_hash_mac.o.allyesconfig.new 22932 4683 64 27679 6c1f ip_set_hash_mac.o.allyesconfig.old 10443 1040 0 11483 2cdb ip_set_hash_mac.o.defconfig.new 10507 1040 0 11547 2d1b ip_set_hash_mac.o.defconfig.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30Revert "netfilter: x_tables: ensure last rule in base chain matches ↵Florian Westphal
underflow/policy" This reverts commit 0d7df906a0e78079a02108b06d32c3ef2238ad25. Valdis Kletnieks reported that xtables is broken in linux-next since 0d7df906a0e78 ("netfilter: x_tables: ensure last rule in base chain matches underflow/policy"), as kernel rejects the (well-formed) ruleset: [ 64.402790] ip6_tables: last base chain position 1136 doesn't match underflow 1344 (hook 1) mark_source_chains is not the correct place for such a check, as it terminates evaluation of a chain once it sees an unconditional verdict (following rules are known to be unreachable). It seems preferrable to fix libiptc instead, so remove this check again. Fixes: 0d7df906a0e78 ("netfilter: x_tables: ensure last rule in base chain matches underflow/policy") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: x_tables: Add note about how to free percpu countersBen Hutchings
Due to the way percpu counters are allocated and freed in blocks, it is not safe to free counters individually. Currently all callers do the right thing, but let's note this restriction. Fixes: ae0ac0ed6fcf ("netfilter: x_tables: pack percpu counter allocations") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: Merge assignment with returnArushi Singhal
Merge assignment with return statement to directly return the value. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: use nft_set_lookup_global from nf_tables_newsetelem()Pablo Neira Ayuso
Replace opencoded implementation of nft_set_lookup_global() by call to this function. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: rename to nft_set_lookup_global()Pablo Neira Ayuso
To prepare shorter introduction of shorter function prefix. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: enable conntrack if NAT chain is registeredPablo Neira Ayuso
Register conntrack hooks if the user adds NAT chains. Users get confused with the existing behaviour since they will see no packets hitting this chain until they add the first rule that refers to conntrack. This patch adds new ->init() and ->free() indirections to chain types that can be used by NAT chains to invoke the conntrack dependency. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: build-in filter chain typePablo Neira Ayuso
One module per supported filter chain family type takes too much memory for very little code - too much modularization - place all chain filter definitions in one single file. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: nft_register_chain_type() returns voidPablo Neira Ayuso
Use WARN_ON() instead since it should not happen that neither family goes over NFPROTO_NUMPROTO nor there is already a chain of this type already registered. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: rename struct nf_chain_typePablo Neira Ayuso
Use nft_ prefix. By when I added chain types, I forgot to use the nftables prefix. Rename enum nft_chain_type to enum nft_chain_types too, otherwise there is an overlap. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebt_stp: Use generic functions for comparisonsJoe Perches
Instead of unnecessary const declarations, use the generic functions to save a little object space. $ size net/bridge/netfilter/ebt_stp.o* text data bss dec hex filename 1250 144 0 1394 572 net/bridge/netfilter/ebt_stp.o.new 1344 144 0 1488 5d0 net/bridge/netfilter/ebt_stp.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30ceph: only dirty ITER_IOVEC pages for direct readYan, Zheng
If a page is already locked, attempting to dirty it leads to a deadlock in lock_page(). This is what currently happens to ITER_BVEC pages when a dio-enabled loop device is backed by ceph: $ losetup --direct-io /dev/loop0 /mnt/cephfs/img $ xfs_io -c 'pread 0 4k' /dev/loop0 Follow other file systems and only dirty ITER_IOVEC pages. Cc: stable@kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-30netfilter: add flowtable documentationPablo Neira Ayuso
This patch adds initial documentation for the Netfilter flowtable infrastructure. Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebtables: Add string filterBernie Harris
This patch is part of a proposal to add a string filter to ebtables, which would be similar to the string filter in iptables. Like iptables, the ebtables filter uses the xt_string module. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebtables: Add support for specifying match revisionBernie Harris
Currently ebtables assumes that the revision number of all match modules is 0, which is an issue when trying to use existing xtables matches with ebtables. The solution is to modify ebtables to allow extensions to specify a revision number, similar to iptables. This gets passed down to the kernel, which is then able to find the match module correctly. To main binary backwards compatibility, the size of the ebt_entry structures is not changed, only the size of the name field is decreased by 1 byte to make room for the revision field. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-29Merge tag 'for-4.16/dm-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix a DM multipath regression introduced in a v4.16-rc6 commit: restore support for loading, and attaching, scsi_dh modules during multipath table load. Otherwise some users may find themselves unable to boot, as was reported today: https://marc.info/?l=linux-scsi&m=152231276114962&w=2 - Fix a DM core ioctl permission check regression introduced in a v4.16-rc5 commit. * tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix dropped return code from dm_get_bdev_for_ioctl dm mpath: fix support for loading scsi_dh modules during table load
2018-03-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "It has been fairly silent lately on our -rc front. Big queue of patches on the mailing list going to for-next though. Bug fixes: - qedr driver bugfixes causing application hangs, wrong uapi errnos, and a race condition - three syzkaller found bugfixes in the ucma uapi Regression fixes for things introduced in 4.16: - Crash on error introduced in mlx5 UMR flow - Crash on module unload/etc introduced by bad interaction of restrack and mlx5 patches this cycle - Typo in a two line syzkaller bugfix causing a bad regression - Coverity report of nonsense code in hns driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/ucma: Introduce safer rdma_addr_size() variants RDMA/hns: ensure for-loop actually iterates and free's buffers RDMA/ucma: Check that device exists prior to accessing it RDMA/ucma: Check that device is connected prior to access it RDMA/rdma_cm: Fix use after free race with process_one_req RDMA/qedr: Fix QP state initialization race RDMA/qedr: Fix rc initialization on CNQ allocation failure RDMA/qedr: fix QP's ack timeout configuration RDMA/ucma: Correct option size check using optlen RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init IB/mlx5: Don't clean uninitialized UMR resources
2018-03-29Merge tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Boris Brezillon: "Two fixes, one in the atmel NAND driver and another one in the CFI/JEDEC code. Summary: - Fix a bug in Atmel ECC engine driver - Fix a bug in the CFI/JEDEC driver" * tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd: mtd: jedec_probe: Fix crash in jedec_read_mfr() mtd: nand: atmel: Fix get_sectorsize() function
2018-03-29dm: fix dropped return code from dm_get_bdev_for_ioctlMike Snitzer
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") reused the variable 'r' to store the return from blkdev_get() that follows prepare_ioctl() -- whereby dropping prepare_ioctl()'s result on the floor. This can lead to an ioctl or persistent reservation being issued to a partition going unnoticed, which implies the extra permission check for CAP_SYS_RAWIO is skipped. Fix this by using a different variable to store blkdev_get()'s return. Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Reported-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkman says: ==================== pull-request: bpf 2018-03-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix nfp to properly check max insn count while emitting instructions in the JIT which was wrongly comparing bytes against number of instructions before, from Jakub. 2) Fix for bpftool to avoid usage of hex numbers in JSON output since JSON doesn't accept hex numbers with 0x prefix, also from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge branch 'bpf-sockmap-ingress'Daniel Borkmann
John Fastabend says: ==================== This series adds the BPF_F_INGRESS flag support to the redirect APIs. Bringing the sockmap API in-line with the cls_bpf redirect APIs. We add it to both variants of sockmap programs, the first patch adds support for tx ulp hooks and the third patch adds support for the recv skb hooks. Patches two and four add tests for the corresponding ingress redirect hooks. Follow on patches can address busy polling support, but next series from me will move the sockmap sample program into selftests. v2: added static to function definition caught by kbuild bot v3: fixed an error branch with missing mem_uncharge in recvmsg op moved receive_queue check outside of RCU region ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30bpf: sockmap, more BPF_SK_SKB_STREAM_VERDICT testsJohn Fastabend
Add BPF_SK_SKB_STREAM_VERDICT tests for ingress hook. While we do this also bring stream tests in-line with MSG based testing. A map for skb options is added for userland to push options at BPF programs. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30bpf: sockmap, BPF_F_INGRESS flag for BPF_SK_SKB_STREAM_VERDICT:John Fastabend
Add support for the BPF_F_INGRESS flag in skb redirect helper. To do this convert skb into a scatterlist and push into ingress queue. This is the same logic that is used in the sk_msg redirect helper so it should feel familiar. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30bpf: sockmap, add BPF_F_INGRESS testsJohn Fastabend
Add a set of tests to verify ingress flag in redirect helpers works correctly with various msg sizes. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30bpf: sockmap redirect ingress supportJohn Fastabend
Add support for the BPF_F_INGRESS flag in sk_msg redirect helper. To do this add a scatterlist ring for receiving socks to check before calling into regular recvmsg call path. Additionally, because the poll wakeup logic only checked the skb recv queue we need to add a hook in TCP stack (similar to write side) so that we have a way to wake up polling socks when a scatterlist is redirected to that sock. After this all that is needed is for the redirect helper to push the scatterlist into the psock receive queue. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-29dm mpath: fix support for loading scsi_dh modules during table loadMike Snitzer
The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29Merge tag 'wireless-drivers-next-for-davem-2018-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.17 Smaller new features to various drivers but nothing really out of ordinary. Major changes: ath10k * enable chip temperature measurement for QCA6174/QCA9377 * add firmware memory dump for QCA9984 * enable buffer STA on TDLS link for QCA6174 * support different beacon internals in multiple interface scenario for QCA988X/QCA99X0/QCA9984/QCA4019 iwlwifi * support for new PCI IDs for the 9000 family * support for a new firmware API version * support for advanced dwell and Optimized Connectivity Experience (OCE) in scanning btrsi * fix kconfig dependencies wil6210 * support multiple virtual interfaces ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29Merge tag 'mac80211-next-for-davem-2018-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a fair number of patches, but many of them are from the first bullet here: * EAPoL-over-nl80211 from Denis - this will let us fix some long-standing issues with bridging, races with encryption and more * DFS offload support from the qtnfmac folks * regulatory database changes for the new ETSI adaptivity requirements * various other fixes and small enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29vhost: validate log when IOTLB is enabledJason Wang
Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29Merge branch 'dsa-Add-ATU-VTU-statistics'David S. Miller
Andrew Lunn says: ==================== Add ATU/VTU statistics Previous patches have added basic support for Address Translation Unit and VLAN translation Unit violation interrupts. Add statistics counters for when these occur, which can be accessed using ethtool. Downgrade one of the particularly spammy warnings from VTU violations to debug only, now that we have a counter for it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: dsa: mv88e6xxx: Make VTU miss violations less spammyAndrew Lunn
VTU miss violations can happen under normal conditions. Don't spam the kernel log, downgrade the output to debug level only. The statistics counter will indicate it is happening, if anybody not debugging is interested. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: dsa: mv88e6xxx: Keep ATU/VTU violation statisticsAndrew Lunn
Count the numbers of various ATU and VTU violation statistics and return them as part of the ethtool -S statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29sctp: fix unused lable warningArnd Bergmann
The proc file cleanup left a label possibly unused: net/sctp/protocol.c: In function 'sctp_defaults_init': net/sctp/protocol.c:1304:1: error: label 'err_init_proc' defined but not used [-Werror=unused-label] This adds an #ifdef around it to match the respective 'goto'. Fixes: d47d08c8ca05 ("sctp: use proc_remove_subtree()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: cavium: use module_pci_driver to simplify the codeWei Yongjun
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: bcmgenet: return NULL instead of plain integerWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/broadcom/genet/bcmgenet.c:1351:16: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29test_bpf: Fix NULL vs IS_ERR() check in test_skb_segment()Dan Carpenter
The skb_segment() function returns error pointers on error. It never returns NULL. Fixes: 76db8087c4c9 ("net: bpf: add a test for skb_segment in test_bpf module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Do not drop rx-checksum invalidated packets.Manish Chopra
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 04:59:03 +0000