summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-01i2c: rcar: reuse status bits as enable bitsWolfram Sang
Status register and enable register are identical regarding their layout. Use the bit definitions for both. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: remove spinlockWolfram Sang
The i2c core has per-adapter locks, so no need to protect again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor status bit handlingWolfram Sang
The old macros made it harder to see what was actually happening. Replace them with something more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor setting up msgWolfram Sang
Setting up a read or write message is similar enough to be done in one function. Also, move a helper function into the new function since it is only used here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: check bus free before first messageWolfram Sang
We should always check if the bus is free, independently if it is a read or write. It should be done before the first message, though. After that, we ourselves keep the bus busy. Remove a 'ret' assignment which only silenced a build warning. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor irq state machineWolfram Sang
Remove the seperate functions and use designated constants. As readable but less overhead. Actually, this is even more readable since the old function used a mix of "=" and "|=". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor bus state machineWolfram Sang
Remove the seperate functions and use designated constants. As readable but less overhead. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: no need to store irq numberWolfram Sang
We use devm, so irq number is only needed during probe. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: not everything needs to be a functionWolfram Sang
Very basic operations, just called once, can also go to the caller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: sh_mobile: add compatibles for additional SoCWolfram Sang
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: add compatibles for additional SoCWolfram Sang
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01ASoC: add RT5677 CODEC driverOder Chiou
This patch adds the Realtek ALC5677 codec driver. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: intel: The Baytrail/MAX98090 driver depends on I2CMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared supportOder Chiou
The patch adds the function "get_clk_info" to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared ↵Oder Chiou
support The patch adds the function of the PLL clock calculation to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and ↵Oder Chiou
RT5651 The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231
2014-06-01ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'reg_size' will always be none zero here, and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'reg_size' zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01staging: lustre: Fix coding styleJosep Puigdemont
The if block should be placed in a new line rather than after the if statement. Blank line required between variable declarations and code. Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01staging: android: binder.c: Use more appropriate functions for euid retrievalTair Rzayev
Instead of getting the reference to whole credential structure, use task_euid() and current_euid() to get it. Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01regulator: core: Fix the init of DT defined fixed regulatorsAlban Bedel
When a regulator is defined using DT and it has a single voltage the regulator init always tries to apply this voltage. However it fails if the regulator isn't settable because it is using an internal low level function. To overcome this we now first query the regulator and only set it if needed. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01ASoC: Add helper functions to cast from DAPM context to CODEC/platformLars-Peter Clausen
This is useful if we have a pointer to a DAPM context and know that it is a CODEC or platform DAPM context and want to get a pointer to the CODEC or platform. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01regulator: core: Disable unused regulators after deferred probing is doneSaravana Kannan
regulator_init_complete does a scan of regulators which dont have always-on or consumers are automatically disabled as being unused. However, with deferred probing, late_initcall() is too soon to declare a regulator as unused as the regulator itself might not have registered due to defferal - Example: A regulator deffered due to i2bus not available which in turn is deffered due to pinctrl availability. Since deferred probing is done in late_initcall(), do the cleanup of unused regulators by regulator_init_complete in late_initcall_sync instead of late_initcall. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [nm@ti.com: minor rewording] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01regulator: Don't disable unused regulators we don't have permission forMark Brown
In the spirit of conservatism that governs our general approach to permissions it is better if we don't touch regulators we weren't explicitly given permissions to control. This avoids the need to explicitly specify unknown regulators in DT as always on, if a regulator is not otherwise involved in software control it can be omitted from the DT. Regulators explicitly given constraints in DT still need to have an always on constraint specified as before. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01dmaengine: Kconfig: Update MXS_DMA help text to include MX6Q/MX6DLFabio Estevam
The APBX-DMA block is also found on MX6Q/MX6DL chips. Update the help text accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01of: dma: Grammar s/requests/request/, s/used required/required/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdma: Enable driver compilation with COMPILE_TESTLaurent Pinchart
This helps increasing build testing coverage. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: rcar-hpbdma: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: sudmac: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: sudmac: Keep #include sorted alphabeticallyLaurent Pinchart
This helps detecting duplicate includes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdmac: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdmac: Keep #include sorted alphabeticallyLaurent Pinchart
This helps detecting duplicate includes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-02drm/exynos/fimd: allow multiplatform configurationAndrzej Hajda
The patch removes dependency on !ARCH_MULTIPLATFORM. This dependency seems to be not longer valid. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: add hdmiphy power on/off sequenceShirish S
This patch implements the power on/off sequence of HDMI PHY in exynos5420 and exynos5250 as provided by the hardware team. This has been verified for mulitple iterations of S2R. Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: remove description of non-existing fieldAndrzej Hajda
ipp_id field is removed from exynos_drm_ippdrv struct. The patch removes its description as well. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: update comment for struct drm_ipp_buf_infoYoungJun Cho
The attribute gem_objs in struct drm_exynos_ipp_buf_info was changed to handles. So the comment needs to be updated also. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rearrange c_node->event_lock using routineYoungJun Cho
The c_node->event_list should be protected with c_node->event_lock. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rearrange c_node->mem_lock using routinesYoungJun Cho
The c_node->mem_list[] should be protected with c_node->mem_lock. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: add ipp_remove_id()YoungJun Cho
This patch adds ipp_remove_id() for idr resource free. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: add cmd_lock for cmd_listYoungJun Cho
This patch adds cmd_lock for cmd_list synchronization. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rename cmd_lock to lockYoungJun Cho
The ippdrv->cmd_list requires cmd_lock. So renames cmd_lock to lock for context. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: remove duplicated settingYoungJun Cho
This patch removes duplicated setting. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.cho@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: remove usless list_empty() functionsYoungJun Cho
list_for_each_entry() handles empty lists, so there is no need to check whether the list is empty first. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Use PTR_ERR_OR_ZERO in exynos_dp_core.cSachin Kamat
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: remove hardware overlays disable from fimd probeRahul Sharma
System hangs when FIMD registers are accessed to disable hardware overlays. This is because of the clocks which are not enabled before register access. 'Hardware overlay disable' is cleaned from the FIMD probe. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Fix checkpatch warning in exynos_dp_reg.cSachin Kamat
Silences the following warning: WARNING: space prohibited before semicolon Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: add fimd dependency to fimd related encodersAndrzej Hajda
DPI, DSI and DP drivers will not work without FIMD. The patch adds appropriate dependencies in Kconfig. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: remove redundant mutex_unlockAndrzej Hajda
The patch fixes unlocking in exynos_drm_component_del. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos/fimc: simplify and rename fimc_dst_get_buf_seqAndrzej Hajda
fimc_dst_get_buf_seq returns number of buffers so the name should be fimc_dst_get_buf_count. Function body has been simplified. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos/fimc: replace mutex by spinlockAndrzej Hajda
Function fimc_dst_set_buf_seq is called by irq handler so it should not use mutexes. This patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>