summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-16Bluetooth: Add another AR3012 04ca:3018 deviceDmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-02-16Bluetooth: hci_bcm: Add support for BCM2E95 and BCM2E96Daniel Drake
The BCM2E96 ID is used by the ECS EF20 laptop, and BCM2E95 is present in the Weibu F3C. Both are now logged as: hci0: BCM: chip id 82 hci0: BCM43341B0 (002.001.014) build 0000 hci0: BCM (002.001.014) build 0158 The ECS vendor kernel predates the host-wakeup support in hci_bcm but it explicitly has a comment saying that the GPIO assignment needs to be reordered for BCM2E96: 1. (not used in vendor driver) 2. Device wakeup 3. Shutdown For both devices in question, the DSDT has these GPIOs listed in order of GpioInt, GpioIo, GpioIo. And if we use the first one listed (GpioInt) as the host wakeup, that interrupt handler fires while doing bluetooth I/O. I am assuming the convention of GPIO ordering has been changed for these new device IDs, so lets use the new ordering on such devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btbcm: Add a delay for module resetWen-chien Jesse Sung
Some btbcm devices require more time to complete its reset process. They won't reply any hci command until reset is done. [ 17.218554] Bluetooth: hci0 command 0x1001 tx timeout [ 25.214999] Bluetooth: hci0: BCM: Reading local version info failed (-110) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add support for 413c:8143Wen-chien Jesse Sung
This is a Boardcom module and requires patchram to work. T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8143 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=20689D1FAF94 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: use dt's irqflags for wakeup pinJeffy Chen
Use irqflags parsed from dt. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: set irq_bt to -1 when failed to parse itJeffy Chen
The irq_of_parse_and_map will return 0 as a invalid irq. Set irq_bt to -1 in this case, so that the btmrvl resume/suspend code would not try to enable/disable it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: avoid double-disable_irq() raceJeffy Chen
It's much the same as what we did for mwifiex in: b9da4d2 mwifiex: avoid double-disable_irq() race "We have a race where the wakeup IRQ might be in flight while we're calling mwifiex_disable_wake() from resume(). This can leave us disabling the IRQ twice. Let's disable the IRQ and enable it in case if we have double-disabled it." Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: Fix NULL pointer dereference in bt_sock_recvmsgEzequiel Garcia
As per the comment in include/linux/net.h, the recvfrom handlers should expect msg_name to be NULL. However, bt_sock_recvmsg() is currently not checking it, which could lead to a NULL pointer dereference. The following NULL pointer dereference was produced while testing L2CAP datagram reception. Note that the kernel is tainted due to the r8723bs module being inserted. However, it seems the fix still applies. $ l2test -r -G l2test[326]: Receiving ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ee008000 [00000000] *pgd=7f896835 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: r8723bs(O) CPU: 0 PID: 326 Comm: l2test Tainted: G O 4.8.0 #1 Hardware name: Allwinner sun7i (A20) Family task: ef1c6880 task.stack: eea70000 PC is at __memzero+0x58/0x80 LR is at l2cap_skb_msg_name+0x1c/0x4c pc : [<c02c47d8>] lr : [<c0506278>] psr: 00070013 sp : eea71e60 ip : 00000000 fp : 00034e1c r10: 00000000 r9 : 00000000 r8 : eea71ed4 r7 : 000002a0 r6 : eea71ed8 r5 : 00000000 r4 : ee4a5d80 r3 : 00000000 r2 : 00000000 r1 : 0000000e r0 : 00000000 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7600806a DAC: 00000051 Process l2test (pid: 326, stack limit = 0xeea70210) Stack: (0xeea71e60 to 0xeea72000) 1e60: ee4a5d80 eeac2800 000002a0 c04d7114 173eefa0 00000000 c06ca68e 00000000 1e80: 00000001 eeac2800 eef23500 00000000 000002a0 eea71ed4 eea70000 c0504d50 1ea0: 00000000 00000000 eef23500 00000000 00000000 c044e8a0 eea71edc eea9f904 1ec0: bef89aa0 fffffff7 00000000 00035008 000002a0 00000000 00000000 00000000 1ee0: 00000000 00000000 eea71ed4 00000000 00000000 00000000 00004000 00000000 1f00: 0000011b c01078c4 eea70000 c044e5e4 00000000 00000000 642f0001 6c2f7665 1f20: 0000676f 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 ffffffff 00000001 bef89ad8 1f60: 000000a8 c01078c4 eea70000 00000000 00034e1c c01e6c74 00000000 00000000 1f80: 00034e1c 000341f8 00000000 00000123 c01078c4 c044e90c 00000000 00000000 1fa0: 000002a0 c0107700 00034e1c 000341f8 00000003 00035008 000002a0 00000000 1fc0: 00034e1c 000341f8 00000000 00000123 00000000 00000000 00011ffc 00034e1c 1fe0: 00000000 bef89aa4 0001211c b6eebb60 60070010 00000003 00000000 00000000 [<c02c47d8>] (__memzero) from [<c0506278>] (l2cap_skb_msg_name+0x1c/0x4c) [<c0506278>] (l2cap_skb_msg_name) from [<c04d7114>] (bt_sock_recvmsg+0x128/0x160) [<c04d7114>] (bt_sock_recvmsg) from [<c0504d50>] (l2cap_sock_recvmsg+0x98/0x134) [<c0504d50>] (l2cap_sock_recvmsg) from [<c044e8a0>] (SyS_recvfrom+0x94/0xec) [<c044e8a0>] (SyS_recvfrom) from [<c044e90c>] (SyS_recv+0x14/0x1c) [<c044e90c>] (SyS_recv) from [<c0107700>] (ret_fast_syscall+0x0/0x3c) Code: e3110010 18a0500c e49de004 e3110008 (18a0000c) ---[ end trace 224e35e79fe06b42 ]--- Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeupRajat Jain
The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add out-of-band wakeup supportRajat Jain
Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Use an error label for error pathsRajat Jain
Use a label to remove the repetetive cleanup, for error cases. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btqcomsmd: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias $ After this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias alias: of:N*T*Cqcom,wcnss-btC* alias: of:N*T*Cqcom,wcnss-bt Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: add support for 0bb4:0306Christoph Haag
It's a custom USB ID for the broadcom bt adapter in the HTC Vive. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bb4 ProdID=0306 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM2045A0 S: SerialNumber=AC3743E110CE C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) dmesg: Bluetooth: hci0: BCM: chip id 102 Bluetooth: hci0: c-l Bluetooth: hci0: BCM (001.001.005) build 0000 Bluetooth: hci0: BCM (001.001.005) build 0481 Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU Signed-off-by: Christoph Haag <haagch@frickel.club> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursorMichel Dänzer
The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds") Cc: stable@vger.kernel.org Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-16ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()Kees Cook
The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16ARM: 8657/1: uaccess: consistently check object sizesKees Cook
In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"), the object size checks are moved outside the access_ok() so that bad destinations are detected before hitting the "memset(dest, 0, size)" in the copy_from_user() failure path. This makes the same change for arm, with attention given to possibly extracting the uaccess routines into a common header file for all architectures in the future. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16cfq-iosched: don't call wbt_disable_default() with IRQs disabledJens Axboe
wbt_disable_default() calls del_timer_sync() to wait for the wbt timer to finish before disabling throttling. We can't do this with IRQs disable. This fixes a lockdep splat on boot, if non-root cgroups are used. Reported-by: Gabriel C <nix.or.die@gmail.com> Fixes: 87760e5eef35 ("block: hook up writeback throttling") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-16hwmon: (sht15) Add device tree supportMarco Franchi
Allow the driver to work with device tree support. Based on initial patch submission from Peter Fox. Tested on a imx7d-sdb board connected to a SHT15 board via Mikro Bus. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-16EDAC, mce_amd: Print IPID and Syndrome on a separate lineYazen Ghannam
Currently, the IPID and Syndrome are printed on the same line as the Address. There are cases when we can have a valid Syndrome but not a valid Address. For example, the MCA_SYND register can be used to hold more detailed error info that the hardware folks can use. It's not just DRAM ECC syndromes. There are some error types that aren't related to memory that may have valid syndromes, like some errors related to links in the Data Fabric, etc. In these cases, the IPID and Syndrome are not printed at the same log level as the rest of the stanza, so users won't see them on the console. Console: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Dmesg: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b , Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Print the IPID first and on a new line. The IPID should always be printed on SMCA systems. The Syndrome will then be printed with the IPID and at the same log level when valid: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-16genirq: Clarify logic calculating bogus irqreturn_t valuesJeremy Kerr
Although irqreturn_t is an enum, we treat it (and its enumeration constants) as a bitmask. However, bad_action_ret() uses a less-than operator to determine whether an irqreturn_t falls within allowable bit values, which means we need to know the signededness of an enum type to read the logic, which is implementation-dependent. This change explicitly uses an unsigned type for the comparison. We do this instead of changing to a bitwise test, as the latter compiles to increased instructions in this hot path. It looks like we get the correct behaviour currently (bad_action_ret(-1) returns 1), so this is purely a readability fix. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Link: http://lkml.kernel.org/r/1487219049-4061-1-git-send-email-jk@ozlabs.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msgArnd Bergmann
A bug fix to the MSIx handling in vfio added references to functions that may not be defined if MSI is disabled in the kernel, resulting in this link error: drivers/built-in.o: In function `vfio_msi_set_vector_signal': :(.text+0x450808): undefined reference to `get_cached_msi_msg' :(.text+0x45080c): undefined reference to `write_msi_msg' As suggested by Alex Williamson, add stub implementations for get_cached_msi_msg() and pci_write_msi_msg(). In case this bugfix gets backported, please note that the #ifdef has changed over time, originally both functions were implemented in drivers/pci/msi.c and controlled by CONFIG_PCI_MSI, while nowadays get_cached_msi_msg() is part of the generic MSI support and can be used without PCI. Fixes: b8f02af096b1 ("vfio/pci: Restore MSIx message prior to enabling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Link: http://lkml.kernel.org/r/1413190208.4202.34.camel@ul30vt.home Link: http://lkml.kernel.org/r/20170214215343.3307861-1-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16x86/cpufeature: Move RING3MWAIT feature to avoid conflictsThomas Gleixner
The original feature bit is used in a different branch already. Move it to scattered bits. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Cc: <stable@vger.kernel.org> # 4.9+
2017-02-16regulator: Fix regulator_summary for deviceless consumersLeonard Crestez
It is allowed to call regulator_get with a NULL dev argument (_regulator_get explicitly checks for it) but this causes an error later when printing /sys/kernel/debug/regulator_summary. Fix this by explicitly handling "deviceless" consumers in the debugfs code. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-02-16ixgbe: Don't bother clearing buffer memory for descriptor ringsAlexander Duyck
This patch makes it so that we don't need to bother with clearing the memory out for the descriptor rings. The general idea is to only free buffers associated with buffers in use which are located between the next_to_clean and next_to_use or next_to_alloc values. Everything outside of those regions can be safely ignored since they should have no buffers associated with them. The advantage to doing things this way is that is should speed up bring-up and tear-down of the rings. Specifically we can avoid the 512 or more cycles required to memset the rings in tear-down. In the bring-up phase we then clear the memory as a part of initialization. The general idea is that the clearing in initialization can act as a prefetch of sorts for the buffer info structures so they are in the local CPU when we go to populate them. This should help to improve overall time needed to perform a suspend/resume. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for build_skbAlexander Duyck
This patch adds build_skb support to the Rx path. There are several advantages to this change. 1. It avoids the memcpy and skb->head allocation for small packets which improves performance by about 5% in my tests. 2. It avoids the memcpy, skb->head allocation, and eth_get_headlen for larger packets improving performance by about 10% in my tests. 3. For VXLAN packets it allows the full header to be in skb->data which improves the performance by as much as 30% in some of my tests. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add private flag to control buffer modeAlexander Duyck
Since there are potential drawbacks to the new Rx allocation approach I thought it best to add a "chicken bit" so that we can turn the feature off if in the event that a problem is found. It also provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add support for padding packetAlexander Duyck
This patch adds support for providing a buffer with headroom and tailroom to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this combined with the DMA changes we can start using build_skb to build frames around an incoming Rx buffer instead of having to memcpy the headers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Break out Rx buffer page managementAlexander Duyck
We are going to be expanding the number of Rx paths in the driver. Instead of duplicating all that code I am pulling it apart into separate functions so that we don't have so much code duplication. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Use length to determine if descriptor is doneAlexander Duyck
This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Make use of order 1 pages and 3K buffers independent of FCoEAlexander Duyck
In order to support build_skb with jumbo frames it will be necessary to use 3K buffers for the Rx path with 8K pages backing them. This is needed on architectures that implement 4K pages because we can't support 2K buffers plus padding in a 4K page. In the case of systems that support page sizes larger than 4K the 3K attribute will only be applied to FCoE as we can fall back to using just 2K buffers and adding the padding. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update code to better handle incrementing page countAlexander Duyck
Batch the page count updates instead of doing them one at a time. By doing this we can improve the overall performance as the atomic increment operations can be expensive due to the fact that on x86 they are locked operations which can cause stalls. By doing bulk updates we can consolidate the stall which should help to improve the overall receive performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update driver to make use of DMA attributes in Rx pathAlexander Duyck
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Only DMA sync frame lengthAlexander Duyck
On some platforms, syncing a buffer for DMA is expensive. Rather than sync the whole 2K receive buffer, only synchronise the length of the frame, which will typically be the MTU, or a much smaller TCP ACK. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add function for checking to see if we can reuse pageAlexander Duyck
This patch consolidates the code for the ixgbe driver so that it is more inline with what is already in igb. The general idea is to just consolidate functions that represent logical steps in the Rx process so we can later update them more easily. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Update version to reflect added functionalityMark Rustad
Update the driver version to reflect the new devices that it supports. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: prefix Data Center Bridge ops structStephen Hemminger
Since dcbnl_ops is global, it should be prefixed by ixgbe_ Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Support 2.5Gb and 5Gb speedTony Nguyen
Though not advertised through ethtool, if the link partner advertises a 2.5Gb or 5Gb connection, and the adapter supports it, allow the speed to be used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16x86/platform/UV/NMI: Fix uneccessary kABI breakagetravis@sgi.com
The addition of support for UV Hubless systems unneccessarily broke the kABI for a symbol that is not used by external kernel modules. Remove the symbol from the EXPORT list. Signed-off-by: Mike Travis <mike.travis@hpe.com> Reviewed-by: Russ Anderson <russ.anderson@hpe.com> Link: http://lkml.kernel.org/r/20170215001129.068078379@asylum.americas.sgi.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-16async_tx: deprecate broken support for channel switchingDan Williams
Back in 2011, Russell pointed out that the "async_tx channel switch" capability was violating expectations of the dma mapping api [1]. At the time the existing uses were reviewed as still usable, but that longer term we needed a rework of the raid offload implementation. While some of the framework for a fixed implementation was introduced in 2012 [2], the wider rewrite never materialized. There continues to be interest in raid offload with new dma/raid engine drivers being submitted. Those drivers must not build on top of the broken channel switching capability. Prevent async_tx from using an offload engine if the channel switching capability is enabled. This still allows the engine to be used for other purposes, but the broken way async_tx uses these engines for raid will be disabled. For configurations where this causes a performance regression the only solution is to start the work of eliminating the async_tx api and moving channel management into the raid code directly where it can manage marshalling an operation stream between multiple dma channels. [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2011-January/036753.html [2]: https://lkml.org/lkml/2012/12/6/71 Cc: Anatolij Gustschin <agust@denx.de> Cc: Anup Patel <anup.patel@broadcom.com> Cc: Rameshwar Prasad Sahu <rsahu@apm.com> Cc: Saeed Bishara <saeed.bishara@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-02-15rhashtable: Revert nested table changes.David S. Miller
This reverts commits: 6a25478077d987edc5e2f880590a2bc5fcab4441 9dbbfb0ab6680c6a85609041011484e6658e7d3c 40137906c5f55c252194ef5834130383e639536f It's too risky to put in this late in the release cycle. We'll put these changes into the next merge window instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge tag 'drm-misc-fixes-2017-02-15' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes dp/mst oops fix for v4.10 * tag 'drm-misc-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc: drm/dp/mst: fix kernel oops when turning off secondary monitor
2017-02-16powerpc/64: Disable use of radix under a hypervisorPaul Mackerras
Currently, if the kernel is running on a POWER9 processor under a hypervisor, it may try to use the radix MMU even though it doesn't have the necessary code to do so (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). If the hypervisor supports both radix and HPT, then it will set up the guest to use HPT (since the guest doesn't request radix in the CAS call), but if the radix feature bit is set in the ibm,pa-features property (which is valid, since ibm,pa-features is defined to represent the capabilities of the processor) the guest will try to use radix, resulting in a crash when it turns the MMU on. This makes the minimal fix for the current code, which is to disable radix unless we are running in hypervisor mode. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15scsi: megaraid_sas: handle dma_addr_t right on 32-bitArnd Bergmann
When building with a dma_addr_t that is different from pointer size, we get this warning: drivers/scsi/megaraid/megaraid_sas_fusion.c: In function 'megasas_make_prp_nvme': drivers/scsi/megaraid/megaraid_sas_fusion.c:1654:17: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] It's better to not pretend that the dma address is a pointer and instead use a dma_addr_t consistently. Fixes: 33203bc4d61b ("scsi: megaraid_sas: NVME fast path io support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-15scsi: megaraid_sas: array overflow in megasas_dump_frame()Dan Carpenter
The "sz" variable is in terms of bytes, but we're treating the buffer as an array of __le32 so we have to divide by 4. Fixes: def0eab3af86 ("scsi: megaraid_sas: enhance debug logs in OCR context") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-15scsi: snic: switch to pci_irq_alloc_vectorsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-16cpufreq: CPPC: add ACPI_PROCESSOR dependencyArnd Bergmann
Without the Kconfig dependency, we can get this warning: warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR) Fixes: 5477fb3bd1e8 (ACPI / CPPC: Add a CPUFreq driver for use with CPPC) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-16cpufreq: make ti-cpufreq explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/cpufreq/Kconfig.arm:config ARM_TI_CPUFREQ drivers/cpufreq/Kconfig.arm: bool "Texas Instruments CPUFreq support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-16cpufreq: Do not clear real_cpus mask on policy initRafael J. Wysocki
If new_policy is set in cpufreq_online(), the policy object has just been created and its real_cpus mask has been zeroed on allocation, and the driver's ->init() callback should not touch it. It doesn't need to be cleared again, so don't do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2017-02-16tools/power/x86: Debug utility for intel_pstate driverDoug Smythies
This utility can be used to debug and tune the performance of the intel_pstate driver. This utility can be used in two ways: - If there is Linux trace file with pstate_sample events enabled, then this utility can parse the trace file and generate performance plots. - If user has not specified a trace file as input via command line parameters, then this utility enables and collects trace data for a user-specified interval and generates performance plots. Signed-off-by: Doug Smythies <dsmythies@telus.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 20:06:19 +0000