summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-18bonding: Fix netconsole to not deadlock on rmmodNeil Horman
Netconsole calls netpoll_cleanup on receipt of a NETDEVICE_UNREGISTER event. The notifier subsystem calls these event handlers with rtnl_lock held, which netpoll_cleanup also takes, resulting in deadlock. Fix this by calling the __netpoll_cleanup interior function instead, and fixing up the additional pointers. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix napi poll for bonding driverNeil Horman
Usually the netpoll path, when preforming a napi poll can get away with just polling all the napi instances of the configured device. Thats not the case for the bonding driver however, as the napi instances which may wind up getting flagged as needing polling after the poll_controller call don't belong to the bonded device, but rather to the slave devices. Fix this by checking the device in question for the IFF_MASTER flag, if set, we know we need to check the full poll list for this cpu, rather than just the devices napi instance list. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix deadlock in bonding driver resulting from internal locking when ↵Neil Horman
using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix bonding drivers improper modification of netpoll structureNeil Horman
The bonding driver currently modifies the netpoll structure in its xmit path while sending frames from netpoll. This is racy, as other cpus can access the netpoll structure in parallel. Since the bonding driver points np->dev to a slave device, other cpus can inadvertently attempt to send data directly to slave devices, leading to improper locking with the bonding master, lost frames, and deadlocks. This patch fixes that up. This patch also removes the real_dev pointer from the netpoll structure as that data is really only used by bonding in the poll_controller, and we can emulate its behavior by check each slave for IS_UP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18Merge branch 'for-spi' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin into spi/next
2010-10-18e1000e: Fix for offline diag test failure at first callCarolyn Wyborny
Move link test call to later in the offline sequence, move the restore settings block to afterwards and add another reset to ensure the hardware is in a known state afterwards. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18igbvf: Remove unneeded pm_qos* callsGreg Rose
Power Management Quality of Service is not supported or used by the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18igb: fix stats handlingEric Dumazet
There are currently some problems with igb. - On 32bit arches, maintaining 64bit counters without proper synchronization between writers and readers. - Stats updated every two seconds, as reported by Jesper. (Jesper provided a patch for this) - Potential problem between worker thread and ethtool -S This patch uses u64_stats_sync, and convert everything to be 64bit safe, SMP safe, even on 32bit arches. It integrates Jesper idea of providing accurate stats at the time user reads them. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18tracing: Remove parent recording in latency tracer graph optionsSteven Rostedt
Even though the parent is recorded with the normal function tracing of the latency tracers (irqsoff and wakeup), the function graph recording is bogus. This is due to the function graph messing with the return stack. The latency tracers pass in as the parent CALLER_ADDR0, which works fine for plain function tracing. But this causes bogus output with the graph tracer: 3) <idle>-0 | d.s3. 0.000 us | return_to_handler(); 3) <idle>-0 | d.s3. 0.000 us | _raw_spin_unlock_irqrestore(); 3) <idle>-0 | d.s3. 0.000 us | return_to_handler(); 3) <idle>-0 | d.s3. 0.000 us | trace_hardirqs_on(); The "return_to_handle()" call is the trampoline of the function graph tracer, and is meaningless in this context. Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing: Use one prologue for the preempt irqs off tracer function tracersSteven Rostedt
The preempt and irqsoff tracers have three types of function tracers. Normal function tracer, function graph entry, and function graph return. Each of these use a complex dance to prevent recursion and whether to trace the data or not (depending if interrupts are enabled or not). This patch moves the duplicate code into a single routine, to prevent future mistakes with modifying duplicate complex code. Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing: Use one prologue for the wakeup tracer function tracersSteven Rostedt
The wakeup tracer has three types of function tracers. Normal function tracer, function graph entry, and function graph return. Each of these use a complex dance to prevent recursion and whether to trace the data or not (depending on the wake_task variable). This patch moves the duplicate code into a single routine, to prevent future mistakes with modifying duplicate complex code. Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing: Graph support for wakeup tracerJiri Olsa
Add function graph support for wakeup latency tracer. The graph output is enabled by setting the 'display-graph' trace option. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1285243253-7372-4-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing: Make graph related irqs/preemptsoff functions globalJiri Olsa
Move trace_graph_function() and print_graph_headers_flags() functions to the trace_function_graph.c to be globaly available. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing: Add proper check for irq_depth routinesJiri Olsa
The check_irq_entry and check_irq_return could be called from graph event context. In such case there's no graph private data allocated. Adding checks to handle this case. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <20100924154102.GB1818@jolsa.brq.redhat.com> [ Fixed some grammar in the comments ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18tracing/trivial: Remove cast from void*matt mooney
Unnecessary cast from void* in assignment. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18netxen: mask correctable erroramit salecha
HW workaround: Disable logging of correctable error for some NX3031 based adapter. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18netxen: fix race in tx stop queueRajesh Borundia
There is race between netif_stop_queue and netif_stopped_queue check.So check once again if buffers are available to avoid race. With above logic we can also get rid of tx lock in process_cmd_ring. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18qlcnic: update ethtool statsamit salecha
Added statistics for Nic Partition supported adapter. These statistics are maintined in device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18IPv4: route.c: Change checks against 0xffffffff to ipv4_is_lbcast()Andy Walls
Change a few checks against the hardcoded broadcast address, 0xffffffff, to ipv4_is_lbcast(). Remove some existing checks using ipv4_is_lbcast() that are now obviously superfluous. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
2010-10-18Merge branch 'can/mcp251x-for-net-next' of ↵David S. Miller
git://git.pengutronix.de/git/mkl/linux-2.6
2010-10-18bnx2x: update version to 1.60.00-2Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: remove unnecessary FUNC_FLG_RSS flag and relatedDmitry Kravkov
As suggested by: Joe Perches <joe@perches.com> Although RSS is meaningless when there is a single HW queue we still need it enabled in order to have HW Rx hash generated. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Use correct FW constant for header paddingDmitry Kravkov
the value of the constant is the same, but it's clearer to use original constant provided by HSI Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: do not deal with power if no capabilityDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: remove redundant commands during error handlingDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Optimized the branching in the bnx2x_rx_int()Vladislav Zolotarov
Optimized the branching in the bnx2x_rx_int() based on the fact that FP CQE will always have at least one of START or STOP flags set, so if not both bits are set and START bit is not set, then it's a STOP bit that is set. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18GFS2: fixed typoAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-10-18can: mcp251x: optimize 2515, rx int gets cleared automaticallyMarc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: define helper functions mcp251x_is_2510, mcp251x_is_2515Marc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: Don't use pdata->model for chip selection anymoreMarc Kleine-Budde
Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1, the mcp251x chip model can be selected via the modalias member in the struct spi_board_info. The driver stores the actual model in the struct mcp251x_platform_data. From the driver point of view the platform_data should be read only. Since all in-tree users of the mcp251x have already been converted to the modalias method, this patch moves the "model" member from the struct mcp251x_platform_data to the driver's private data structure. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Marc Zyngier <maz@misterjones.org>
2010-10-18ARM: S5P64X0: Bug fix on errors of build with CONFIG_PREEMPT_NONESeungChull Suh
This patch adds header <linux/sched.h> into the below files for build with CONFIG_PREEMPT_NONE. arch/arm/mach-s5p64x0/cpu.c Signed-off-by: Seung-Chull Suh <sc.suh@samsung.com> [kgene.kim@samsung.com: edited title and message] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Fix GPIO rbank supportAtul Dahiya
The patch removes s3c_gpio_lock/unlock to avoid acquiring the lock recursively as lock is already acquired by calling function. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: removed useless variable due to this] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Replace the 6440 system device class definition with 64x0Abhilash Kesavan
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: FIX typo in the ADC device nameNaveen Krishna Ch
Fix the touch screen device name from s3c64x0-adc to s3c64xx-adc. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: s5p64x0_defconfig: Update for support S5P6440 and S5P6450Kukjin Kim
This patch updates s5p64x0_defconfig and changes the name from s5p6440_defconfig so that can support S5P6440 and S5P6450 with one kernel. Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Add UART serial support for S5P6450Kukjin Kim
This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-10-18ARM: S5P64X0: Move SMDK6440 board file and Add SMDK6450 board fileKukjin Kim
This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Move GPIO support files for merge S5P64X0Kukjin Kim
This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Add S5P6450 I2C supportKukjin Kim
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Move DMA support for S5P64X0Kukjin Kim
This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
2010-10-18ARM: S5P64X0: Update Audio supportKukjin Kim
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
2010-10-18ARM: S5P64X0: Update Timer supportKukjin Kim
This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Update IRQ supportKukjin Kim
This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Update Clock for S5P6440 and S5P6450Kukjin Kim
This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization supportKukjin Kim
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18netfilter: install missing ebtables headers for userspaceNick Bowler
The ebt_ip6.h and ebt_nflog.h headers are not not known to Kbuild and therefore not installed by make headers_install. Fix that up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-18can: mcp251x: write intf only when neededMarc Kleine-Budde
This patch introduces a variable "clear_intf" that hold the bits that should be cleared. Only read-modify-write register if "clear_intf" is set. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: read-modify-write eflag only when neededSascha Hauer
Use read-modify-write instead of a simple write to change the register contents, to close existing the race window between the original manual read and write. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: allow to read two registers in one spi transferSascha Hauer
This patch bases on work done earlier by David Jander. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
generated by cgit (git 2.34.1) at 2025-09-19 09:54:31 +0000