| Age | Commit message (Collapse) | Author |
|---|
|
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Override the hardware strap configuration for MDI-X mode to ensure a
predictable initial state for the driver. The initial mode of the LAN87xx
PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no
documented way to read its latched status.
This unpredictability means the driver cannot know if the PHY has
initialized with Auto-MDIX enabled or disabled, preventing it from
providing a reliable interface to the user.
This patch introduces a `config_init` hook that forces the PHY into a
known state by explicitly enabling Auto-MDIX.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
in level-triggered mode. However, in this configuration, the DMA does not
assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
This creates a functional regression where the condition
if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
never evaluate to true, preventing proper interrupt handling for
level-triggered mode. The hardware specification explicitly states that
"The DMA does not assert the NIS status bit for the Rx or Tx interrupt
events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
The fix ensures correct handling of both edge and level-triggered
interrupts while maintaining backward compatibility with existing
configurations. It has been tested on the hardware device (not publicly
available), and it can properly trigger the RX and TX interrupt handling
in both the INTM=0 and INTM=2 configurations.
Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Tested-by: EricChan <chenchuangyu@xiaomi.com>
Signed-off-by: EricChan <chenchuangyu@xiaomi.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Introduce SO_INQ & SCM_INQ.
We have an application that uses almost the same code for TCP and
AF_UNIX (SOCK_STREAM).
The application uses TCP_INQ for TCP, but AF_UNIX doesn't have it
and requires an extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO)
as an alternative.
Also, ioctl(SIOCINQ) for AF_UNIX SOCK_STREAM is more expensive because
it needs to iterate all skb in the receive queue.
This series adds a cached field for SIOCINQ to speed it up and introduce
SO_INQ, the generic version of TCP_INQ to get the queue length as cmsg in
each recvmsg().
====================
Link: https://patch.msgid.link/20250702223606.1054680-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's add a simple test to check the basic functionality of SO_INQ.
The test does the following:
1. Create socketpair in self->fd[]
2. Enable SO_INQ
3. Send data via self->fd[0]
4. Receive data from self->fd[1]
5. Compare the SCM_INQ cmsg with ioctl(SIOCINQ)
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have an application that uses almost the same code for TCP and
AF_UNIX (SOCK_STREAM).
TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an
extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an
alternative.
Let's introduce the generic version of TCP_INQ.
If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that
contains the exact value of ioctl(SIOCINQ). The cmsg is also
included when msg->msg_get_inq is non-zero to make sockets
io_uring-friendly.
Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to
override setsockopt() for SOL_SOCKET.
By having the flag in struct unix_sock, instead of struct sock, we
can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq.
Note also that supporting custom getsockopt() for SOL_SOCKET will need
preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP).
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In unix_stream_read_generic(), state->msg is fetched multiple times.
Let's cache it in a local variable.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compared to TCP, ioctl(SIOCINQ) for AF_UNIX SOCK_STREAM socket is more
expensive, as unix_inq_len() requires iterating through the receive queue
and accumulating skb->len.
Let's cache the value for SOCK_STREAM to a new field during sendmsg()
and recvmsg().
The field is protected by the receive queue lock.
Note that ioctl(SIOCINQ) for SOCK_DGRAM returns the length of the first
skb in the queue.
SOCK_SEQPACKET still requires iterating through the queue because we do
not touch functions shared with unix_dgram_ops. But, if really needed,
we can support it by switching __skb_try_recv_datagram() to a custom
version.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_stream_read_skb() calls skb_recv_datagram() with MSG_DONTWAIT,
which is mostly equivalent to sock_error(sk) + skb_dequeue().
In the following patch, we will add a new field to cache the number
of bytes in the receive queue. Then, we want to avoid introducing
atomic ops in the fast path, so we will reuse the receive queue lock.
As a preparation for the change, let's not use skb_recv_datagram()
in unix_stream_read_skb().
Note that sock_error() is now moved out of the u->iolock mutex as
the mutex does not synchronise the peer's close() at all.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_stream_read_skb() checks SOCK_DEAD only when the dequeued skb is
OOB skb.
unix_stream_read_skb() is called for a SOCK_STREAM socket in SOCKMAP
when data is sent to it.
The function is invoked via sk_psock_verdict_data_ready(), which is
set to sk->sk_data_ready().
During sendmsg(), we check if the receiver has SOCK_DEAD, so there
is no point in checking it again later in ->read_skb().
Also, unix_read_skb() for SOCK_DGRAM does not have the test either.
Let's remove the SOCK_DEAD test in unix_stream_read_skb().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When __skb_try_recv_datagram() returns NULL in __unix_dgram_recvmsg(),
we hold unix_state_lock() unconditionally.
This is because SOCK_SEQPACKET sk needs to return EOF in case its peer
has been close()d concurrently.
This behaviour totally depends on the timing of the peer's close() and
reading sk->sk_shutdown, and taking the lock does not play a role.
Let's drop the lock from __unix_dgram_recvmsg() and use READ_ONCE().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lee Trager says:
====================
eth: fbnic: Add firmware logging support
Firmware running on fbnic generates device logs. These logs contain useful
information about the device which may or may not be related to the host.
Logs are stored in a ring buffer and accessible through DebugFS.
====================
Link: https://patch.msgid.link/20250702192207.697368-1-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow reading the firmware log in DebugFS by accessing the fw_log file.
Buffer is read while a spinlock is acquired.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-7-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The firmware log buffer is enabled during probe and freed during remove.
Early versions of firmware do not support sending logs. Once the mailbox is
up driver will enable logging when supported firmware versions are detected.
Logging is disabled before the mailbox is freed.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-6-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default firmware will not send logs to the host. This must be explicitly
enabled by the driver. The mailbox has the concept of a flag which is a u32
used as a boolean. Lack of flag defaults to a value of false. When enabling
logging historical logs may be optionally requested. These are log messages
generated by the NIC before the driver was loaded. The driver also sends a
log version to support changing the logging format in the future.
[SEND_LOGS_REQ] = {
[SEND_LOGS] /* flag to request log reporting */
[SEND_LOGS_HISTORY] /* flag to request historical logs */
[SEND_LOGS_VERSION] /* u32 indicating the log format version */
}
Logs may be sent to the user either one at a time, or when historical logs
are requested in bulk. Firmware may not send more than 14 messages in bulk
to prevent flooding the mailbox.
[LOG_MSG] = {
[LOG_INDEX] /* entry 0 - u64 index of log */
[LOG_MSEC] /* entry 0 - u32 timestamp of log */
[LOG_MSG] /* entry 0 - char log message up to 256 */
[LOG_LENGTH] /* u32 of remaining log items in arrays */
[LOG_INDEX_ARRAY] = {
[LOG_INDEX] /* entry 1 - u64 index of log */
[LOG_INDEX] /* entry 2 - u64 index of log */
...
}
[LOG_MSEC_ARRAY] = {
[LOG_MSEC] /* entry 1 - u32 timestamp of log */
[LOG_MSEC] /* entry 2 - u32 timestamp of log */
...
}
[LOG_MSG_ARRAY] = {
[LOG_MSG] /* entry 1 - char log message up to 256 */
[LOG_MSG] /* entry 2 - char log message up to 256 */
...
}
}
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-5-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When enabled, firmware may send logs messages which are specific to the
device and not the host. Create a ring buffer to store these messages
which are read by a user through DebugFS. Buffer access is protected by
a spinlock.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-4-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new macro based on FIELD_PREP to generate easily readable minimum
firmware version ints. This macro will prevent the mistake from the
previous patch from happening again.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-3-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The full minimum version is 0.10.6-0. The six is now correctly defined as
patch and shifted appropriately. 0.10.6-0 is a preproduction version of
firmware which was released over a year and a half ago. All production
devices meet this requirement.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-2-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-07-08
The following pull-request contains common mlx5 updates
for your *net-next* tree.
v2: https://lore.kernel.org/1751574385-24672-1-git-send-email-tariqt@nvidia.com
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Check device memory pointer before usage
net/mlx5: fs, fix RDMA TRANSPORT init cleanup flow
net/mlx5: Add IFC bits for PCIe Congestion Event object
net/mlx5: Small refactor for general object capabilities
net/mlx5: fs, add multiple prios to RDMA TRANSPORT steering domain
====================
Link: https://patch.msgid.link/1752002102-11316-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes for v6.16-rc6
The first patch fixes an embarrassing bug in the pwm core. I really
wonder this wasn't found earlier since it's introduction in v6.11-rc1
as it greatly disturbs driving a PWM via sysfs.
The second and last patch fixes a clock balance issue in an error path
of the Mediatek PWM driver"
* tag 'pwm/for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: mediatek: Ensure to disable clocks in error path
pwm: Fix invalid state detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Daniel Gomez:
"This includes two fixes: one introduced in the current release cycle
and another introduced back in v6.4-rc1. Additionally, as Petr and
Luis mentioned in previous pull requests, add myself (Daniel Gomez) to
the list of modules maintainers.
The first was reported by Intel's kernel test robot, and it addresses
a crash exposed by Sebastian's commit c50d295c37f2 ("rds: Use
nested-BH locking for rds_page_remainder") by allowing relocations for
the per-CPU section even if it lacks the SHF_ALLOC flag.
Petr and Sebastian went down to the archive history (before Git) and
found the commit that broke it at [1] / [2] ("Don't relocate
non-allocated regions in modules.").
The second fix, reported and fixed by Petr (with additional cleanup),
resolves a memory leak by ensuring proper deallocation if module
loading fails.
We couldn't find a reproducer other than forcing it manually or
leveraging eBPF. So, I tested it by enabling error injection in the
codetag functions through the error path that produces the leak and
made it fail until execmem is unable to allocate more memory"
Link: https://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux-fullhistory.git/commit/?id=b3b91325f3c7 [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=1a6100caae [2]
* tag 'modules-6.16-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
MAINTAINERS: update Daniel Gomez's role and email address
module: Make sure relocations are applied to the per-CPU section
module: Avoid unnecessary return value initialization in move_module()
module: Fix memory deallocation on error path in move_module()
|
|
Under some circumstances, the compiler will emit the following warning for
rxrpc_send_response():
net/rxrpc/output.c: In function 'rxrpc_send_response':
net/rxrpc/output.c:974:1: warning: the frame size of 1160 bytes is larger than 1024 bytes
This occurs because the local variables include a 16-element scatterlist
array and a 16-element bio_vec array. It's probably not actually a problem
as this function is only called by the rxrpc I/O thread function in a
kernel thread and there won't be much on the stack before it.
Fix this by overlaying the bio_vec array over the kvec array in the
rxrpc_local struct. There is one of these per I/O thread and the kvec
array is intended for pointing at bits of a packet to be transmitted,
typically a DATA or an ACK packet. As packets for a local endpoint are
only transmitted by its specific I/O thread, there can be no race, and so
overlaying this bit of memory should be no problem.
Fixes: 5800b1cf3fd8 ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506240423.E942yKJP-lkp@intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250707102435.2381045-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bitops UAPI fix from Yury Norov:
"Fix BITS_PER_LONG merge error
Tomas' fix for __BITS_PER_LONG was effectively reverted by a wrong
merge. Fix it and add the related files to MAINTAINERS"
* tag 'bitmap-for-6.16-rc6' of https://github.com/norov/linux:
MAINTAINERS: bitmap: add UAPI headers
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again (2)
|
|
Jakub Kicinski says:
====================
net: migrate remaining drivers to dedicated _rxfh_context ops
Around a year ago Ed added dedicated ops for managing RSS contexts.
This significantly improved the clarity of the driver facing API.
Migrate the remaining 3 drivers and remove the old way of muxing
the RSS context operations via .set_rxfh().
v2: https://lore.kernel.org/20250702030606.1776293-1-kuba@kernel.org
v1: https://lore.kernel.org/20250630160953.1093267-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250707184115.2285277-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we don't have the compat code we can reduce the indent
a little. No functional changes.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All drivers are now converted to dedicated _rxfh_context ops.
Remove the use of >set_rxfh() to manage additional contexts.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert mlx5 to dedicated RXFH ops. This is a fairly shallow
conversion, TBH, most of the driver code stays as is, but we
let the core allocate the context ID for the driver.
mlx5e_rx_res_rss_get_rxfh() and friends are made void, since
core only calls the driver for context 0. The second call
is right after context creation so it must exist (tm).
Tested with drivers/net/hw/rss_ctx.py on MCX6.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250707184115.2285277-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICE appears to have some odd form of rss_context use plumbed
in for .get_rxfh. The .set_rxfh side does not support creating
contexts, however, so this must be dead code. For at least a year
now (since commit 7964e7884643 ("net: ethtool: use the tracking
array for get_rxfh on custom RSS contexts")) we have not been
calling .get_rxfh with a non-zero rss_context. We just get
the info from the RSS XArray under dev->ethtool.
Remove what must be dead code in the driver, clear the support flags.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
otx2 only supports additional indirection tables (no separate keys
etc.) so the conversion to dedicated callbacks and core-allocated
context is mostly removing the code which stores the extra tables
in the driver. Core already stores the indirection tables for
additional contexts, and doesn't call .get for them.
One subtle change here is that we'll now start with the table
covering all queues, not directing all traffic to queue 0.
This is what core expects if the user doesn't pass the initial
indir table explicitly (there's a WARN_ON() in the core trying
to make sure driver authors don't forget to populate ctx to
defaults).
Drivers implementing .create_rxfh_context don't have to set
cap_rss_ctx_supported, so remove it.
Tested-by: Geetha Sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update Daniel Gomez's modules reviewer role to maintainer. This is
according to the plan [1][2][3] of scaling with more reviewers for
modules (for the incoming Rust support [4]) and rotate [5] every 6
months.
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/linux-modules/ZsPANzx4-5DrOl5m@bombadil.infradead.org [1]
Link: https://lore.kernel.org/linux-modules/20240821174021.2371547-1-mcgrof@kernel.org [2]
Link: https://lore.kernel.org/linux-modules/458901be-1da8-4987-9c72-5aa3da6db15e@suse.com [3]
Link: https://lore.kernel.org/linux-modules/20250702-module-params-v3-v14-0-5b1cc32311af@kernel.org [4]
Link: https://lore.kernel.org/linux-modules/Z3gDAnPlA3SZEbgl@bombadil.infradead.org [5]
Acked-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The per-CPU data section is handled differently than the other sections.
The memory allocations requires a special __percpu pointer and then the
section is copied into the view of each CPU. Therefore the SHF_ALLOC
flag is removed to ensure move_module() skips it.
Later, relocations are applied and apply_relocations() skips sections
without SHF_ALLOC because they have not been copied. This also skips the
per-CPU data section.
The missing relocations result in a NULL pointer on x86-64 and very
small values on x86-32. This results in a crash because it is not
skipped like NULL pointer would and can't be dereferenced.
Such an assignment happens during static per-CPU lock initialisation
with lockdep enabled.
Allow relocation processing for the per-CPU section even if SHF_ALLOC is
missing.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506041623.e45e4f7d-lkp@intel.com
Fixes: 1a6100caae425 ("Don't relocate non-allocated regions in modules.") #v2.6.1-rc3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250610163328.URcsSUC1@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250610163328.URcsSUC1@linutronix.de>
|
|
All error conditions in move_module() set the return value by updating the
ret variable. Therefore, it is not necessary to the initialize the variable
when declaring it.
Remove the unnecessary initialization.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-3-petr.pavlu@suse.com>
|
|
The function move_module() uses the variable t to track how many memory
types it has allocated and consequently how many should be freed if an
error occurs.
The variable is initially set to 0 and is updated when a call to
module_memory_alloc() fails. However, move_module() can fail for other
reasons as well, in which case t remains set to 0 and no memory is freed.
Fix the problem by initializing t to MOD_MEM_NUM_TYPES. Additionally, make
the deallocation loop more robust by not relying on the mod_mem_type_t enum
having a signed integer as its underlying type.
Fixes: c7ee8aebf6c0 ("module: add stop-grap sanity check on module memcpy()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-2-petr.pavlu@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix an uninitialized variable in the s390 optimized SHA-1 and SHA-2.
Note that my librarification changes also fix this by greatly
simplifying how the s390 optimized SHA code is integrated. However, we
need this separate fix for 6.16 and older versions"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: s390/sha - Fix uninitialized variable in SHA-1 and SHA-2
|
|
Vhost net need to know the exact virtio net hdr size to be able
to copy such header correctly. Teach it about the newly defined
UDP tunnel-related option and update the hdr size computation
accordingly.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new tun features to represent the newly introduced virtio
GSO over UDP tunnel offload. Allows detection and selection of
such features via the existing TUNSETOFFLOAD ioctl and compute
the expected virtio header size and tunnel header offset using
the current netdev features, so that we can plug almost seamless
the newly introduced virtio helpers to serialize the extended
virtio header.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
v6 -> v7:
- rebased
v4 -> v5:
- encapsulate the guest feature guessing in a tun helper
- dropped irrelevant check on xdp buff headroom
- do not remove unrelated black line
- avoid line len > 80 char
v3 -> v4:
- virtio tnl-related fields are at fixed offset, cleanup
the code accordingly.
- use netdev features instead of flags bit to check for
the configured offload
- drop packet in case of enabled features/configured hdr
size mismatch
v2 -> v3:
- cleaned-up uAPI comments
- use explicit struct layout instead of raw buf.
|
|
If the related virtio feature is set, enable transmission and reception
of gso over UDP tunnel packets.
Most of the work is done by the previously introduced helper, just need
to determine the UDP tunnel features inside the virtio_net_hdr and
update accordingly the virtio net hdr size.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtio specification are introducing support for GSO over UDP
tunnel.
This patch brings in the needed defines and the additional virtio hdr
parsing/building helpers.
The UDP tunnel support uses additional fields in the virtio hdr, and such
fields location can change depending on other negotiated features -
specifically VIRTIO_NET_F_HASH_REPORT.
Try to be as conservative as possible with the new field validation.
Existing implementation for plain GSO offloads allow for invalid/
self-contradictory values of such fields. With GSO over UDP tunnel we can
be more strict, with no need to deal with legacy implementation.
Since the checksum-related field validation is asymmetric in the driver
and in the device, introduce a separate helper to implement the new checks
(to be used only on the driver side).
Note that while the feature space exceeds the 64-bit boundaries, the
guest offload space is fixed by the specification of the
VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command to a 64-bit size.
Prior to the UDP tunnel GSO support, each guest offload bit corresponded
to the feature bit with the same value and vice versa.
Due to the limited 'guest offload' space, relevant features in the high
64 bits are 'mapped' to free bits in the lower range. That is simpler
than defining a new command (and associated features) to exchange an
extended guest offloads set.
As a consequence, the uAPIs also specify the mapped guest offload value
corresponding to the UDP tunnel GSO features.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
--
v4 -> v5:
- avoid lines above 80 chars
v3 -> v4:
- fixed offset for UDP GSO tunnel, update accordingly the helpers
- tried to clarified vlan_hlen semantic
- virtio_net_chk_data_valid() -> virtio_net_handle_csum_offload()
v2 -> v3:
- add definitions for possible vnet hdr layouts with tunnel support
v1 -> v2:
- 'relay' -> 'rely' typo
- less unclear comment WRT enforced inner GSO checks
- inner header fields are allowed only with 'modern' virtio,
thus are always le
- clarified in the commit message the need for 'mapped features'
defines
- assume little_endian is true when UDP GSO is enabled.
- fix inner proto type value
|
|
The virtio_net driver needs it to implement GSO over UDP tunnel
offload.
The only missing piece is mapping them to/from the extended
features.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the extended feature type for 'acked_features' and implement
two new ioctls operation allowing the user-space to set/query an
unbounded amount of features.
The actual number of processed features is limited by VIRTIO_FEATURES_MAX
and attempts to set features above such limit fail with
EOPNOTSUPP.
Note that: the legacy ioctls implicitly truncate the negotiated
features to the lower 64 bits range and the 'acked_backend_features'
field don't need conversion, as the only negotiated feature there
is in the low 64 bit range.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtio specifications allows for up to 128 bits for the
device features. Soon we are going to use some of the 'extended'
bits features (above 64) for the virtio_net driver.
Extend the virtio pci modern driver to support configuring the full
virtio features range, replacing the unrolled loops reading and
writing the features space with explicit one bounded to the actual
features space size in word and implementing the get_extended_features
callback.
Note that in vp_finalize_features() we only need to cache the lower
64 features bits, to process the transport features.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtio specifications allows for up to 128 bits for the
device features. Soon we are going to use some of the 'extended'
bits features (above 64) for the virtio_net driver.
Introduce extended features as a fixed size array of u64. To minimize
the diffstat allows legacy driver to access the low 64 bits via a
transparent union.
Introduce an extended get_extended_features configuration callback
that devices supporting the extended features range must implement in
place of the traditional one.
Note that legacy and transport features don't need any change, as
they are always in the low 64 bit range.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mentioned macro introduce by the next patch will foul kdoc;
fully expand the mentioned macro to avoid the issue.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As RACK-TLP was published as a standards-track RFC8985,
so the outdated ref draft-ietf-tcpm-rack need to be updated.
Signed-off-by: Xin Guo <guoxin0309@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250705163647.301231-1-guoxin0309@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
is enabled
Now that we have an own config symbol for the PHY package module,
we can use it to reduce size of these structs if it isn't enabled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/f0daefa4-406a-4a06-a4f0-7e31309f82bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refine qdisc_pkt_len_init to include headers up through
the inner transport header when computing header size
for encapsulations. Also refine net/sched/sch_cake.c
borrowed from qdisc_pkt_len_init().
Signed-off-by: Fengyuan Gong <gfengyuan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250702160741.1204919-1-gfengyuan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are device-specific small fixes, including HD-audio, USB-audio
and ASoC Intel quirks, as well as ASoC fsl, Cirrus codec and the
legacy AD driver fixes.
All look safe and easy"
* tag 'sound-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset Mic on Positivo K116J
ALSA: hda/tas2781: Fix calibration data parser issue
ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp()
ASoC: cs35l56: probe() should fail if the device ID is not recognized
ALSA: hda/realtek: Add quirk for ASUS ExpertBook B9403CVAR
ASoC: Intel: sof_sdw: Add quirks for Lenovo P1 and P16
ALSA: usb-audio: Improve filtering of sample rates on Focusrite devices
ASoC: Intel: soc-acpi: arl: Correct order of cs42l43 matches
MAINTAINERS: update Qualcomm audio codec drivers list
ASoC: fsl_sai: Force a software reset when starting in consumer mode
ASoC: Intel: SND_SOC_INTEL_SOF_BOARD_HELPERS select SND_SOC_ACPI_INTEL_MATCH
ASoC: fsl_asrc: use internal measured ratio for non-ideal ratio mode
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fb2xxx
ALSA: hda: Add missing NVIDIA HDA codec IDs
|
|
Jijie Shao says:
====================
Support some features for the HIBMCGE driver
v4: https://lore.kernel.org/20250701125446.720176-1-shaojijie@huawei.com
v3: https://lore.kernel.org/20250626020613.637949-1-shaojijie@huawei.com
v2: https://lore.kernel.org/20250623034129.838246-1-shaojijie@huawei.com
v1: https://lore.kernel.org/20250619144423.2661528-1-shaojijie@huawei.com
====================
Link: https://patch.msgid.link/20250702125716.2875169-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
