summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-07PM: <linux/device.h>: fix @em_pd kernel-doc warningRandy Dunlap
Fix kernel-doc warning in <linux/device.h>: ../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device' Fixes: 1bc138c62295 ("PM / EM: add support for other devices than CPUs in Energy Model") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/d97f40ad-3033-703a-c3cb-2843ce0f6371@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-07openrisc: Fix cache API compile issue when not inliningStafford Horne
I found this when compiling a kbuild random config with GCC 11. The config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS -fno-inline-functions-called-once. This causes the call to cache_loop in cache.c to not be inlined causing the below compile error. In file included from arch/openrisc/mm/cache.c:13: arch/openrisc/mm/cache.c: In function 'cache_loop': ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm' 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1 The asm constraint "K" requires a immediate constant argument to mtspr, however because of no inlining a register argument is passed causing a failure. Fix this by using __always_inline. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2020-09-07openrisc: Reserve memblock for initrdStafford Horne
Recently OpenRISC added support for external initrd images, but I found some instability when using larger buildroot initrd images. It turned out that I forgot to reserve the memblock space for the initrd image. This patch fixes the instability issue by reserving memblock space. Fixes: ff6c923dbec3 ("openrisc: Add support for external initrd images") Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
2020-09-07spi: stm32: Rate-limit the 'Communication suspended' messageMarek Vasut
The 'spi_stm32 44004000.spi: Communication suspended' message means that when using PIO, the kernel did not read the FIFO fast enough and so the SPI controller paused the transfer. Currently, this is printed on every single such event, so if the kernel is busy and the controller is pausing the transfers often, the kernel will be all the more busy scrolling this message into the log buffer every few milliseconds. That is not helpful. Instead, rate-limit the message and print it every once in a while. It is not possible to use the default dev_warn_ratelimited(), because that is still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every 5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more than enough and the cycles saved on printing are better left to the CPU to handle the SPI. However, dev_warn_once() is also not useful, as the user should be aware that this condition is possibly recurring or ongoing. Thus the custom rate-limit policy. Finally, turn the message from dev_warn() to dev_dbg(), since the system does not suffer any sort of malfunction if this message appears, it is just slowing down. This further reduces the printing into the log buffer and frees the CPU to do useful work. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-07ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failureCezary Rojewski
Introduce for_each_rtd_dais_rollback macro which behaves exactly like for_each_codec_dais_rollback and its cpu_dais equivalent but for all dais instead. Use newly added macro to fix soc_pcm_open error path and prevent uninitialized dais from being cleaned-up. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Fixes: 5d9fa03e6c35 ("ASoC: soc-pcm: tidyup soc_pcm_open() order") Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-07rbd: require global CAP_SYS_ADMIN for mapping and unmappingIlya Dryomov
It turns out that currently we rely only on sysfs attribute permissions: $ ll /sys/bus/rbd/{add*,remove*} --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove --w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major This means that images can be mapped and unmapped (i.e. block devices can be created and deleted) by a UID 0 process even after it drops all privileges or by any process with CAP_DAC_OVERRIDE in its user namespace as long as UID 0 is mapped into that user namespace. Be consistent with other virtual block devices (loop, nbd, dm, md, etc) and require CAP_SYS_ADMIN in the initial user namespace for mapping and unmapping, and also for dumping the configuration string and refreshing the image header. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-09-07xfrm: clone whole liftime_cur structure in xfrm_do_migrateAntony Antony
When we clone state only add_time was cloned. It missed values like bytes, packets. Now clone the all members of the structure. v1->v3: - use memcpy to copy the entire structure Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-09-07xfrm: clone XFRMA_SEC_CTX in xfrm_do_migrateAntony Antony
XFRMA_SEC_CTX was not cloned from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - return -ENOMEM on error v2->v3: - fix return type to int Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-09-07xfrm: clone XFRMA_REPLAY_ESN_VAL in xfrm_do_migrateAntony Antony
XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - move curleft cloning to a separate patch Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-09-07xfrm: clone XFRMA_SET_MARK in xfrm_do_migrateAntony Antony
XFRMA_SET_MARK and XFRMA_SET_MARK_MASK was not cloned from the old to the new. Migrate these two attributes during XFRMA_MSG_MIGRATE Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-09-07arm64: perf: Add general hardware LLC events for PMUv3Leo Yan
This patch is to add the general hardware last level cache (LLC) events for PMUv3: one event is for LLC access and another is for LLC miss. With this change, perf tool can support last level cache profiling, below is an example to demonstrate the usage on Arm64: $ perf stat -e LLC-load-misses -e LLC-loads -- \ perf bench mem memcpy -s 1024MB -l 100 -f default [...] Performance counter stats for 'perf bench mem memcpy -s 1024MB -l 100 -f default': 35,534,262 LLC-load-misses # 2.16% of all LL-cache hits 1,643,946,443 LLC-loads [...] Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200811053505.21223-1-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07arm64: traps: Add str of description to panic() in die()Yue Hu
Currently, there are different description strings in die() such as die("Oops",,), die("Oops - BUG",,). And panic() called by die() will always show "Fatal exception" or "Fatal exception in interrupt". Note that panic() will run any panic handler via panic_notifier_list. And the string above will be formatted and placed in static buf[] which will be passed to handler. So panic handler can not distinguish which Oops it is from the buf if we want to do some things like reserve the string in memory or panic statistics. It's not benefit to debug. We need to add more codes to troubleshoot. Let's utilize existing resource to make debug much simpler. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200804085347.10720-1-zbestahu@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07kobject: Drop unneeded conditional in __kobject_del()Andy Shevchenko
__kobject_del() is called from two places, in one where kobj is dereferenced before and thus can't be NULL, and in the other the NULL check is done before call. Drop unneeded conditional in __kobject_del(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200803083520.5460-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-07m68k: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200826185212.3139-1-grandmaster@al2klimov.de Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-09-07m68k: mm: Remove superfluous memblock_alloc*() castsGeert Uytterhoeven
The return type of memblock_alloc*() is a void pointer, so there is no need to cast it to "void *" or some other pointer type, before assigning it to a pointer variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/20200826130444.25618-1-geert@linux-m68k.org
2020-09-07m68k: mm: Use PAGE_ALIGNED() helperGeert Uytterhoeven
Use the existing PAGE_ALIGNED() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200826130103.25381-1-geert@linux-m68k.org
2020-09-07m68k: Sort selects in main KconfigGeert Uytterhoeven
Sort the list of select statements in the main Kconfig file for the m68k architecture, to avoid conflicts when modifying this list. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200826125259.24069-1-geert@linux-m68k.org
2020-09-07m68k: amiga: Clean up Amiga hardware configurationGeert Uytterhoeven
Move the generic Amiga hardware configuration section out of the switch statement, which allows to replace all ugly jumps by break statements. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200826125124.23863-1-geert@linux-m68k.org
2020-09-07m68k: Revive _TIF_* masksGeert Uytterhoeven
While the core m68k code does not use the _TIF_* masks anymore, there exists generic code that relies on their presence. Fortunately none of that code is used on m68k, currently. Re-add the various _TIF_* masks, which were removed in commit cddafa3500fde4a0 ("m68k/m68knommu: merge MMU and non-MMU thread_info.h"), to avoid future nasty surprises. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/20200826122923.22821-1-geert@linux-m68k.org
2020-09-07Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver"Mauro Carvalho Chehab
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore: with it applied, WiFi stops working, and the Kernel starts printing this message every second: wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186 Hardware name: HiKey970 (DT) Workqueue: events_freezable ieee80211_restart_work [mac80211] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore] sp : ffff8000126c3a60 x29: ffff8000126c3a60 x28: 00000000000025de x27: 0000000000000010 x26: 0000000000000005 x25: ffff0001a5d49e80 x24: ffff8000092cf580 x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8 x21: ffff0001b7e46200 x20: 00000000fffffffb x19: ffff0001a78e6400 x18: 0000000000000030 x17: 0000000000000001 x16: 0000000000000001 x15: ffff0001b7e46670 x14: ffffffffffffffff x13: ffff8000926c37d7 x12: ffff8000126c37e0 x11: ffff800011e01000 x10: ffff8000120526d0 x9 : 0000000000000000 x8 : 3431206572756c69 x7 : 6166206574756365 x6 : 0000000000000c2c x5 : 0000000000000000 x4 : ffff0001bf1361e8 x3 : ffff0001bf1790b0 x2 : 0000000000000000 x1 : ffff0001a5d49e80 x0 : 0000000000000001 Call trace: wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] wl12xx_queue_recovery_work+0x24/0x30 [wlcore] wl1271_cmd_set_sta_key+0x258/0x25c [wlcore] wl1271_set_key+0x7c/0x2dc [wlcore] wlcore_set_key+0xe4/0x360 [wlcore] wl18xx_set_key+0x48/0x1d0 [wl18xx] wlcore_op_set_key+0xa4/0x180 [wlcore] ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211] ieee80211_reenable_keys+0x70/0x110 [mac80211] ieee80211_reconfig+0xa00/0xca0 [mac80211] ieee80211_restart_work+0xc4/0xfc [mac80211] process_one_work+0x1cc/0x350 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x30 ---[ end trace b1f722abf9af5919 ]--- wlcore: WARNING could not set keys wlcore: ERROR Could not add or replace key wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5) wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79 wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39 wlcore: down wlcore: down ieee80211 phy0: Hardware restart was requested mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ Tested on Hikey 970. This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
2020-09-07ALSA: hda: fixup headset for ASUS GX502 laptopLuke D Jones
The GX502 requires a few steps to enable the headset i/o: pincfg, verbs to enable and unmute the amp used for headpone out, and a jacksense callback to toggle output via internal or jack using a verb. Signed-off-by: Luke D Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208005 Link: https://lore.kernel.org/r/20200907081959.56186-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-07mmc: sdio: Use mmc_pre_req() / mmc_post_req()Adrian Hunter
SDHCI changed from using a tasklet to finish requests, to using an IRQ thread i.e. commit c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet"). Because this increased the latency to complete requests, a preparatory change was made to complete the request from the IRQ handler if possible i.e. commit 19d2f695f4e827 ("mmc: sdhci: Call mmc_request_done() from IRQ handler if possible"). That alleviated the situation for MMC block devices because the MMC block driver makes use of mmc_pre_req() and mmc_post_req() so that successful requests are completed in the IRQ handler and any DMA unmapping is handled separately in mmc_post_req(). However SDIO was still affected, and an example has been reported with up to 20% degradation in performance. Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared to be a possible candidate for making use of asynchronous requests within its I/O loops, but analysis revealed that these loops almost never iterate more than once, so the complexity of the change would not be warrented. Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has the potential benefit of reducing the duration of interrupt handlers, as well as addressing the latency issue for SDHCI. It also seems a more reasonable solution than forcing drivers to do everything in the IRQ handler. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-of-esdhc: Don't walk device-tree on every interruptChris Packham
Commit b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") added code to check for a specific compatible string in the device-tree on every esdhc interrupat. Instead of doing this record the quirk in struct sdhci_esdhc and lookup the struct in esdhc_irq. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200903012029.25673-1-chris.packham@alliedtelesis.co.nz Fixes: b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unsetUlf Hansson
The commit cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU") made CONFIG_NO_DMA to be set for some platforms, for good reasons. Consequentially, CONFIG_HAS_DMA doesn't get set, which makes the DMA mapping interface to be built as stub functions, but also prevent the mmc_spi driver from being built as it depends on CONFIG_HAS_DMA. It turns out that for some odd cases, the driver still relied on the DMA mapping interface, even if the DMA was not actively being used. To fixup the behaviour, let's drop the build dependency for CONFIG_HAS_DMA. Moreover, as to allow the driver to succeed probing, let's move the DMA initializations behind "#ifdef CONFIG_HAS_DMA". Fixes: cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU") Reported-by: Rich Felker <dalias@libc.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20200901150438.228887-1-ulf.hansson@linaro.org
2020-09-07mmc: sdhci-msm: Add retries when all tuning phases are found validDouglas Anderson
As the comments in this patch say, if we tune and find all phases are valid it's _almost_ as bad as no phases being found valid. Probably all phases are not really reliable but we didn't detect where the unreliable place is. That means we'll essentially be guessing and hoping we get a good phase. This is not just a problem in theory. It was causing real problems on a real board. On that board, most often phase 10 is found as the only invalid phase, though sometimes 10 and 11 are invalid and sometimes just 11. Some percentage of the time, however, all phases are found to be valid. When this happens, the current logic will decide to use phase 11. Since phase 11 is sometimes found to be invalid, this is a bad choice. Sure enough, when phase 11 is picked we often get mmc errors later in boot. I have seen cases where all phases were found to be valid 3 times in a row, so increase the retry count to 10 just to be extra sure. Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-acpi: Clear amd_sdhci_host on resetRaul E Rangel
The commit 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") broke resume for eMMC HS400. When the system suspends the eMMC controller is powered down. So, on resume we need to reinitialize the controller. Although, amd_sdhci_host was not getting cleared, so the DLL was never re-enabled on resume. This results in HS400 being non-functional. To fix the problem, this change clears the tuned_clock flag, clears the dll_enabled flag and disables the DLL on reset. Fixes: 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-06cifs: fix DFS mount with cifsacl/modefromsidRonnie Sahlberg
RHBZ: 1871246 If during cifs_lookup()/get_inode_info() we encounter a DFS link and we use the cifsacl or modefromsid mount options we must suppress any -EREMOTE errors that triggers or else we will not be able to follow the DFS link and automount the target. This fixes an issue with modefromsid/cifsacl where these mountoptions would break DFS and we would no longer be able to access the share. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-09-06Linux 5.9-rc4v5.9-rc4Linus Torvalds
2020-09-06net: dsa: rtl8366: Properly clear member configLinus Walleij
When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06Merge tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more io_uring fixes from Jens Axboe: "Two followup fixes. One is fixing a regression from this merge window, the other is two commits fixing cancelation of deferred requests. Both have gone through full testing, and both spawned a few new regression test additions to liburing. - Don't play games with const, properly store the output iovec and assign it as needed. - Deferred request cancelation fix (Pavel)" * tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block: io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files io_uring: fix explicit async read/write mapping for large segments
2020-09-06net: macb: fix for pause frame receive enable bitParshuram Thombare
PAE bit of NCFGR register, when set, pauses transmission if a non-zero 802.3 classic pause frame is received. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06Merge tag 'iommu-fixes-v5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL pointer dereference bug and serialize a hardware register access as required by the VT-d spec. - two patches for AMD IOMMU to force AMD GPUs into translation mode when memory encryption is active and disallow using IOMMUv2 functionality. This makes the AMDGPU driver work when memory encryption is active. - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping Table Entries. - MAINTAINERS file update for the Qualcom IOMMU driver. * tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Handle 36bit addressing for x86-32 iommu/amd: Do not use IOMMUv2 functionality when SME is active iommu/amd: Do not force direct mapping when SME is active iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE iommu/amd: Restore IRTE.RemapEn bit after programming IRTE iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() iommu/vt-d: Serialize IOMMU GCMD register modifications MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move
2020-09-06Merge tag 'x86-urgent-2020-09-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - more generic entry code ABI fallout - debug register handling bugfixes - fix vmalloc mappings on 32-bit kernels - kprobes instrumentation output fix on 32-bit kernels - fix over-eager WARN_ON_ONCE() on !SMAP hardware - NUMA debugging fix - fix Clang related crash on !RETPOLINE kernels * tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Unbreak 32bit fast syscall x86/debug: Allow a single level of #DB recursion x86/entry: Fix AC assertion tracing/kprobes, x86/ptrace: Fix regs argument order for i386 x86, fakenuma: Fix invalid starting node ID x86/mm/32: Bring back vmalloc faulting on x86_32 x86/cmdline: Disable jump tables for cmdline.c
2020-09-06irqchip/gic-v2, v3: Prevent SW resends entirelyValentin Schneider
The GIC irqchips can now use a HW resend when a retrigger is invoked by check_irq_resend(). However, should the HW resend fail, check_irq_resend() will still attempt to trigger a SW resend, which is still a bad idea for the GICs. Prevent this from happening by setting IRQD_HANDLE_ENFORCE_IRQCTX on all GIC IRQs. Technically per-cpu IRQs do not need this, as their flow handlers never set IRQS_PENDING, but this aligns all IRQs wrt context enforcement: this also forces all GIC IRQ handling to happen in IRQ context (as defined by in_irq()). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-3-valentin.schneider@arm.com
2020-09-06irqchip/git-v3-its: Implement irq_retrigger callback for device-triggered LPIsMarc Zyngier
It is pretty easy to provide a retrigger callback for the ITS, as it we already have the required support in terms of irq_set_irqchip_state(). Note that this only works for device-generated LPIs, and not the GICv4 doorbells, which should never have to be retriggered anyway. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()Valentin Schneider
While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come to my attention that the IRQ resend situation seems a bit precarious for the GIC(s). When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out and issue an irq_eoi(). Should the IRQ in question be re-enabled, check_irq_resend() will trigger a SW resend, which will go through the flow handler again and issue *another* irq_eoi() on the *same* IRQ activation. This is something the GIC spec clearly describes as a bad idea: any EOI must match a previous ACK. Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC pending bit of the relevant IRQ. After being called by check_irq_resend(), this will eventually trigger a *new* interrupt which we will handle as usual. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-2-valentin.schneider@arm.com
2020-09-06genirq: Walk the irq_data hierarchy when resending an interruptMarc Zyngier
On resending an interrupt, we only check the outermost irqchip for a irq_retrigger callback. However, this callback could be implemented at an inner level. Use irq_chip_retrigger_hierarchy() in this case. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06Merge tag 'for-linus-5.9-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A small series for fixing a problem with Xen PVH guests when running as backends (e.g. as dom0). Mapping other guests' memory is now working via ZONE_DEVICE, thus not requiring to abuse the memory hotplug functionality for that purpose" * tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: add helpers to allocate unpopulated memory memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC xen/balloon: add header guard
2020-09-05cxgb4: Fix offset when clearing filter byte countersGanji Aravind
Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-05Merge branch 'hinic-BugFixes'Jakub Kicinski
Luo bin says: ==================== hinic: BugFixes The bugs fixed in this patchset have been present since the following commits: patch #1: Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation") patch #2: Fixes: 5e126e7c4e52 ("hinic: add firmware update support") ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-05hinic: bump up the timeout of UPDATE_FW cmdLuo bin
Firmware erases the entire flash region which may take several seconds before flashing, so we bump up the timeout to ensure this cmd won't return failure. Fixes: 5e126e7c4e52 ("hinic: add firmware update support") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-05hinic: bump up the timeout of SET_FUNC_STATE cmdLuo bin
We free memory regardless of the return value of SET_FUNC_STATE cmd in hinic_close function to avoid memory leak and this cmd may timeout when fw is busy with handling other cmds, so we bump up the timeout of this cmd to ensure it won't return failure. Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-05io_uring: fix linked deferred ->files cancellationPavel Begunkov
While looking for ->files in ->defer_list, consider that requests there may actually be links. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-05io_uring: fix cancel of deferred reqs with ->filesPavel Begunkov
While trying to cancel requests with ->files, it also should look for requests in ->defer_list, otherwise it might end up hanging a thread. Cancel all requests in ->defer_list up to the last request there with matching ->files, that's needed to follow drain ordering semantics. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-05Merge tags 'auxdisplay-for-linus-v5.9-rc4', ↵Linus Torvalds
'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux Pull misc fixes from Miguel Ojeda: "A trivial patch for auxdisplay: - Replace HTTP links with HTTPS ones (Alexander A. Klimov) The usual clang-format trivial update: - Update with the latest for_each macro list (Miguel Ojeda) And Luc requested me to pick a sparse fix on my queue, so here it goes along with other two trivial Compiler Attributes ones (also from Luc). - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van Oostenryck) - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van Oostenryck) - Compiler Attributes: remove comment about sparse not supporting __has_attribute (Luc Van Oostenryck)" * tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: auxdisplay: Replace HTTP links with HTTPS ones * tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list * tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: sparse: use static inline for __chk_{user,io}_ptr() Compiler Attributes: fix comment concerning GCC 4.6 Compiler Attributes: remove comment about sparse not supporting __has_attribute
2020-09-05Merge tag 'arc-5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - HSDK-4xd Dev system: perf driver updates for sampling interrupt - HSDK* Dev System: Ethernet broken [Evgeniy Didin] - HIGHMEM broken (2 memory banks) [Mike Rapoport] - show_regs() rewrite once and for all - Other minor fixes * tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id arc: fix memory initialization for systems with two memory banks irqchip/eznps: Fix build error for !ARC700 builds ARC: show_regs: fix r12 printing and simplify ARC: HSDK: wireup perf irq ARC: perf: don't bail setup if pct irq missing in device-tree ARC: pgalloc.h: delete a duplicated word + other fixes
2020-09-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: MAINTAINERS, ipc, fork, checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration, hugetlb)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() mm: memcg: fix memcg reclaim soft lockup memcg: fix use-after-free in uncharge_batch
2020-09-05include/linux/log2.h: add missing () around n in roundup_pow_of_two()Jason Gunthorpe
Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-05mm/khugepaged.c: fix khugepaged's request size in collapse_fileDavid Howells
collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to be read to page_cache_sync_readahead(). The intent was probably to read a single page. Fix it to use the number of pages to the end of the window instead. Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yang Shi <shy828301@gmail.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-05mm/hugetlb: fix a race between hugetlb sysctl handlersMuchun Song
There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-24 03:00:55 +0000