| Age | Commit message (Collapse) | Author |
|---|
|
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes that have come in since
the merge window, nothing too major here but all good to have"
* tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-dspi: fix wrong pointer in suspend/resume
spi: bcm2835: fix gpio cs level inversion
spi: imx: fix runtime pm support for !CONFIG_PM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"An addition to MAINTAINERS plus a fix for a nasty bootstrapping
problem which caused problems when we need to read the voltage of a
regulator that is not yet available during initialization, we were not
correctly distinguishing between this case and the case where a
regulator is put into a bypass mode"
* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: defer probe when trying to get voltage from unresolved supply
MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull highmem initialization fix from Mike Rapoport:
"Fix highmem initialization on arm and xtensa
Recent refactoring of memblock iterators has broken initialization of
highmem on arm and xtensa because it changed the way beginning and end
of memory regions are rounded to PFNs. This fix restores the original
behaviour"
* tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Wake up when sd_glock_disposal becomes zero
gfs2: Don't call cancel_delayed_work_sync from within delete work function
gfs2: check for live vs. read-only file system in gfs2_fitrim
gfs2: don't initialize statfs_change inodes in spectator mode
gfs2: Split up gfs2_meta_sync into inode and rgrp versions
gfs2: init_journal's undo directive should also undo the statfs inodes
gfs2: Add missing truncate_inode_pages_final for sd_aspace
gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix ACS regression that broke device pass-through (Rajat Jain)
- Revert DesignWare ATU memory resource to use last entry to fix
Tegra194 regression (Rob Herring)
- Remove duplicate mvebu resource requests to fix regression on Turris
Omnia (Rob Herring)
* tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: mvebu: Fix duplicate resource requests
PCI: dwc: Restore ATU memory resource setup to use last entry
PCI: Always enable ACS even if no ACS Capability
|
|
Check for corner case of port_init failure before using
the port_info pointer.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RISC-V limits the physical memory size by -PAGE_OFFSET. Any memory beyond
that size from DRAM start is unusable. Just remove any memblock pointing
to those memory region without worrying about computing the maximum size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A batch of driver specific fixes that have come up since the merge
window, nothing particularly major here but all good to have.
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Makefile already contains -D_GNU_SOURCE, so we can remove it from the
*.c files.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Previous commit changed how we index the registered credentials, but
neglected to update one spot that is used when the personalities are
iterated through ->show_fdinfo(). Ensure we use the right struct type
for the iteration.
Reported-by: syzbot+a6d494688cdb797bdfce@syzkaller.appspotmail.com
Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow user to request action terse dump with new flag value
TCA_FLAG_TERSE_DUMP. Only output essential action info in terse dump (kind,
stats, index and cookie, if set by the user when creating the action). This
is different from filter terse dump where index is excluded (filter can be
identified by its own handle).
Move tcf_action_dump_terse() function to the beginning of source file in
order to call it from tcf_dump_walker().
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201102201243.287486-1-vlad@buslov.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is a long-standing request of one task locking up execution of
deferred requests, and the defer list contains requests of another task
(all files-less), then a potential execution of __io_uring_task_cancel()
by that another task will sleep until that first long-standing request
completion, and that may take long.
E.g.
tsk1: req1/read(empty_pipe) -> tsk2: req(DRAIN)
Then __io_uring_task_cancel(tsk2) waits for req1 completion.
It seems we even can manufacture a complicated case with many tasks
sharing many rings that can lock them forever.
Cancel deferred requests for __io_uring_task_cancel() as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for 5.10:
- revert a nvme_queue size optimization (Keith Bush)
- fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"
* tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme:
nvme-tcp: avoid repeated request completion
nvme-rdma: avoid repeated request completion
nvme-tcp: avoid race between time out and tear down
nvme-rdma: avoid race between time out and tear down
nvme: introduce nvme_sync_io_queues
Revert "nvme-pci: remove last_sq_tail"
|
|
When _PAGE_ACCESSED is not set, a minor fault is expected.
To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED
into the L2 entry valid bit.
To simplify the processing and reduce the number of instructions in
TLB miss exceptions, manage it as an APG bit and get it next to
_PAGE_GUARDED bit to allow a copy in one go. Then declare the
corresponding groups as handling all accesses as user accesses.
As the PP bits always define user as No Access, it will generate
a fault.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu
|
|
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.
Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.
Fixes: d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes: 5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes: e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes: 5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
|
|
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes: 2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02ca2ed2d3676a096219b48c0f69ec982a75bcf.1602342801.git.christophe.leroy@csgroup.eu
|
|
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes: 84de6ab0e904 ("powerpc/603: don't handle PAGE_ACCESSED in TLB miss handlers.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44367744de54e2315b2f1a8cbbd7f88488072e0.1602342806.git.christophe.leroy@csgroup.eu
|
|
* pm-cpufreq:
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
* pm-cpuidle:
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
* pm-opp:
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
* powercap:
powercap/intel_rapl: remove unneeded semicolon
|
|
There is one error handling path that does not free ref, which may cause
a minor memory leak.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
panic+0x347/0x7c0 kernel/panic.c:231
__warn.cold+0x20/0x46 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
btrfs_fill_super fs/btrfs/super.c:1316 [inline]
btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672
The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).
CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Based on user feedback update the message printed when scrub fails to
start due to write requirements. To make a distinction add a device id
to the messages.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Smatch complains that this code dereferences "entry" before checking
whether it's NULL on the next line. Fortunately, rb_entry() will never
return NULL so it doesn't cause a problem. We can clean up the NULL
checking a bit to silence the warning and make the code more clear.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The minimum reserve size was adjusted to take into account the height of
the tree we are merging, however we can have a root with a level == 0.
What we want is root_level + 1 to get the number of nodes we may have to
cow. This fixes the enospc_debug warning pops with btrfs/101.
Nikolay: this fixes failures on btrfs/060 btrfs/062 btrfs/063 and
btrfs/195 That I was seeing, the call trace was:
[ 3680.515564] ------------[ cut here ]------------
[ 3680.515566] BTRFS: block rsv returned -28
[ 3680.515585] WARNING: CPU: 2 PID: 8339 at fs/btrfs/block-rsv.c:521 btrfs_use_block_rsv+0x162/0x180
[ 3680.515587] Modules linked in:
[ 3680.515591] CPU: 2 PID: 8339 Comm: btrfs Tainted: G W 5.9.0-rc8-default #95
[ 3680.515593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 3680.515595] RIP: 0010:btrfs_use_block_rsv+0x162/0x180
[ 3680.515600] RSP: 0018:ffffa01ac9753910 EFLAGS: 00010282
[ 3680.515602] RAX: 0000000000000000 RBX: ffff984b34200000 RCX: 0000000000000027
[ 3680.515604] RDX: 0000000000000027 RSI: 0000000000000000 RDI: ffff984b3bd19e28
[ 3680.515606] RBP: 0000000000004000 R08: ffff984b3bd19e20 R09: 0000000000000001
[ 3680.515608] R10: 0000000000000004 R11: 0000000000000046 R12: ffff984b264fdc00
[ 3680.515609] R13: ffff984b13149000 R14: 00000000ffffffe4 R15: ffff984b34200000
[ 3680.515613] FS: 00007f4e2912b8c0(0000) GS:ffff984b3bd00000(0000) knlGS:0000000000000000
[ 3680.515615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3680.515617] CR2: 00007fab87122150 CR3: 0000000118e42000 CR4: 00000000000006e0
[ 3680.515620] Call Trace:
[ 3680.515627] btrfs_alloc_tree_block+0x8b/0x340
[ 3680.515633] ? __lock_acquire+0x51a/0xac0
[ 3680.515646] alloc_tree_block_no_bg_flush+0x4f/0x60
[ 3680.515651] __btrfs_cow_block+0x14e/0x7e0
[ 3680.515662] btrfs_cow_block+0x144/0x2c0
[ 3680.515670] merge_reloc_root+0x4d4/0x610
[ 3680.515675] ? btrfs_lookup_fs_root+0x78/0x90
[ 3680.515686] merge_reloc_roots+0xee/0x280
[ 3680.515695] relocate_block_group+0x2ce/0x5e0
[ 3680.515704] btrfs_relocate_block_group+0x16e/0x310
[ 3680.515711] btrfs_relocate_chunk+0x38/0xf0
[ 3680.515716] btrfs_shrink_device+0x200/0x560
[ 3680.515728] btrfs_rm_device+0x1ae/0x6a6
[ 3680.515744] ? _copy_from_user+0x6e/0xb0
[ 3680.515750] btrfs_ioctl+0x1afe/0x28c0
[ 3680.515755] ? find_held_lock+0x2b/0x80
[ 3680.515760] ? do_user_addr_fault+0x1f8/0x418
[ 3680.515773] ? __x64_sys_ioctl+0x77/0xb0
[ 3680.515775] __x64_sys_ioctl+0x77/0xb0
[ 3680.515781] do_syscall_64+0x31/0x70
[ 3680.515785] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 44d354abf33e ("btrfs: relocation: review the call sites which can be interrupted by signal")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To help with debugging, print the type of the block rsv when we fail to
use our target block rsv in btrfs_use_block_rsv.
This now produces:
[ 544.672035] BTRFS: block rsv 1 returned -28
which is still cryptic without consulting the enum in block-rsv.h but I
guess it's better than nothing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: stable@vger.kernel.org # 4.4+
Fixes: df480633b891 ("btrfs: extent-tree: Switch to new delalloc space reserve and release")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ define the variable instead of repeating the shift ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104115717.GA19046@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Move existing bridge packet reject infra to nf_reject_{ipv4,ipv6}.c
from Jose M. Guisado.
2) Consolidate nft_reject_inet initialization and dump, also from Jose.
3) Add the netdev reject action, from Jose.
4) Allow to combine the exist flag and the destroy command in ipset,
from Joszef Kadlecsik.
5) Expose bucket size parameter for hashtables, also from Jozsef.
6) Expose the init value for reproducible ipset listings, from Jozsef.
7) Use __printf attribute in nft_request_module, from Andrew Lunn.
8) Allow to use reject from the inet ingress chain.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nft_reject_inet: allow to use reject from inet ingress
netfilter: nftables: Add __printf() attribute
netfilter: ipset: Expose the initval hash parameter to userspace
netfilter: ipset: Add bucketsize parameter to all hash types
netfilter: ipset: Support the -exist flag with the destroy command
netfilter: nft_reject: add reject verdict support for netdev
netfilter: nft_reject: unify reject init and dump into nft_reject
netfilter: nf_reject: add reject skbuff creation helpers
====================
Link: https://lore.kernel.org/r/20201104141149.30082-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Miscellaneous MPTCP fixes
This is a collection of small fixup and minor enhancement patches that
have accumulated in the MPTCP tree while net-next was closed. These are
prerequisites for larger changes we have queued up.
Patch 1 refines receive buffer autotuning.
Patches 2 and 4 are some minor locking and refactoring changes.
Patch 3 improves GRO and RX coalescing with MPTCP skbs.
Patches 5-7 add a sysctl for tuning ADD_ADDR retransmission timeout,
corresponding test code, and documentation.
v2: Add sysctl documentation and fix signoff tags.
====================
Link: https://lore.kernel.org/r/20201103190509.27416-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.
Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.
We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.
Since we added the netfilter rules in this test case, we need to update
the "config" file.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe the two MPTCP sysctls, what the values mean, and the default
settings.
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch added a new sysctl, named add_addr_timeout, to control the
timeout value (in seconds) of the ADD_ADDR retransmission.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_clean_una() will wake writers in case memory could be reclaimed.
When called from mptcp_sendmsg the wakeup code isn't needed.
Move the wakeup to a new helper and then use that from the mptcp worker.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the TCP stack splits a packet on the write queue, the tail
half currently lose the associated skb extensions, and will not
carry the DSM on the wire.
The above does not cause functional problems and is allowed by
the RFC, but interact badly with GRO and RX coalescing, as possible
candidates for aggregation will carry different TCP options.
This change tries to improve the MPTCP behavior, propagating the
skb extensions on split.
Additionally, we must prevent the MPTCP stack from updating the
mapping after the split occur: that will both violate the RFC and
fool the reader.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function is short and won't sleep, so this can use the _fast version.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to tcp autotuning during read, it may also increase the
receive buffer in tcp_clamp_window().
In this case, mptcp should adjust its receive buffer size as well so
it can move all pending skbs from the subflow socket to the mptcp socket.
At this time, TCP can have more skbs ready for processing than what the
mptcp receive buffer size allows.
In the mptcp case, the receive window announced is based on the free
space of the mptcp parent socket instead of the individual subflows.
Following the subflow allows mptcp to grow its receive buffer.
This is especially noticeable for loopback traffic where two skbs are
enough to fill the initial receive window.
In mptcp_data_ready() we do not hold the mptcp socket lock, so modifying
mptcp_sk->sk_rcvbuf is racy. Do it when moving skbs from subflow to
mptcp socket, both sockets are locked in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's no reason to flush an entire file when we're unsharing part of
a file. Therefore, only initiate writeback on the selected range.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
|
|
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tx checksumming has been defeatured and completely removed
from the h/w reference manual. Made a little cleanup for the
TSE case as this is complementary code.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201103140213.3294-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix coccicheck warnings:
./dpaa_eth.c:2549:2-22: WARNING: Assignment of 0/1 to bool variable
./dpaa_eth.c:2562:2-22: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1604405100-33255-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ADIN1300/ADIN1200 support cable diagnostics using TDR.
The cable fault detection is automatically run on all four pairs looking at
all combinations of pair faults by first putting the PHY in standby (clear
the LINK_EN bit, PHY_CTRL_3 register, Address 0x0017) and then enabling the
diagnostic clock (set the DIAG_CLK_EN bit, PHY_CTRL_1 register, Address
0x0012).
Cable diagnostics can then be run (set the CDIAG_RUN bit in the
CDIAG_RUN register, Address 0xBA1B). The results are reported for each pair
in the cable diagnostics results registers, CDIAG_DTLD_RSLTS_0,
CDIAG_DTLD_RSLTS_1, CDIAG_DTLD_RSLTS_2, and CDIAG_DTLD_RSLTS_3, Address
0xBA1D to Address 0xBA20).
The distance to the first fault for each pair is reported in the cable
fault distance registers, CDIAG_FLT_DIST_0, CDIAG_FLT_DIST_1,
CDIAG_FLT_DIST_2, and CDIAG_FLT_DIST_3, Address 0xBA21 to Address 0xBA24).
This change implements support for this using phylib's cable-test support.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201103074436.93790-2-alexandru.ardelean@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the PHY powers up, the diagnostics clock isn't enabled (bit 2 in
register PHY_CTRL_1 (0x0012)).
Also, the PHY is not in standby mode, so bit 13 in PHY_CTRL_3 (0x0017) is
always set at power up.
The standby mode and the diagnostics clock are both meant to be for the
cable diagnostics feature of the PHY (in phylib this would be equivalent to
the cable-test support), and for the frame-generator feature of the PHY.
In standby mode, the PHY doesn't negotiate links or manage links.
To use the cable diagnostics/test (or frame-generator), the PHY must be
first set in standby mode, so that the link operation doesn't interfere.
Then, the diagnostics clock must be enabled.
For the cable-test feature, when the operation finishes, the PHY goes into
PHY_UP state, and the config_aneg hook is called.
For the ADIN PHY, we need to make sure that during autonegotiation
configuration/setup the PHY is removed from standby mode and the
diagnostics clock is disabled, so that normal operation is resumed.
This change does that by moving the set of the ADIN1300_LINKING_EN bit (2)
in the config_aneg (to disable standby mode).
Previously, this was set in the downshift setup, because the downshift
retry value and the ADIN1300_LINKING_EN are in the same register.
And the ADIN1300_DIAG_CLK_EN bit (13) is cleared, to disable the
diagnostics clock.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201103074436.93790-1-alexandru.ardelean@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nikolay Aleksandrov says:
====================
selftests: net: bridge: add tests for MLDv2
This is the second selftests patch-set for the new multicast functionality
which adds tests for the bridge's MLDv2 support. The tests use full
precooked packets which are sent via mausezahn and the resulting state
after each test is checked for proper X,Y sets, (*,G) source list, source
list entry timers, (S,G) existence and flags, packet forwarding and
blocking, exclude group expiration and (*,G) auto-add. The first 3 patches
factor out common functions which are used by IGMPv3 tests in lib.sh and
add support for IPv6 test UDP packet, then patch 4 adds the first test with
the initial MLDv2 setup.
The following new tests are added:
- base case: MLDv2 report ff02::cc is_include
- include -> allow report
- include -> is_include report
- include -> is_exclude report
- include -> to_exclude report
- exclude -> allow report
- exclude -> is_include report
- exclude -> is_exclude report
- exclude -> to_exclude report
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port
The variable names and set notation are the same as per RFC 3810,
for more information check RFC 3810 sections 2.3 and 7.
====================
Link: https://lore.kernel.org/r/20201103172412.1044840-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we have *,G ports in exclude mode and a new S,G,port is added
the kernel has to automatically create an S,G entry for each exclude
port to get proper forwarding.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that when a group in exclude mode expires it changes mode to
include and the blocked entries are deleted.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
