summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-04serial: bfin_5xx: fix typo in IER checkSonic Zhang
This most likely won't cause problems on systems as people don't typically enable GPIO RTS/CTS if they don't actually use it. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04serial: bfin_5xx: IRDA is not affected by anomaly 05000230Graf Yang
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when the peripheral is operating in UART mode. So drop the anomaly handling when the UART is in IRDA mode. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04serial_cs: add and sort IDs for serial and modem cardsAlexander Kurz
Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04msm_serial: fix serial on troutAbhijeet Dharmapurikar
Set the mnd counter based on uartclk. This fixes a problem on 7x30 where the uartclk is 19.2Mhz rather than the usual 4.8Mhz. Trout incorrectly reports uartclk to be running at 19.2Mhz It is actually running at 4.8Mhz. For trout force mnd counter values as if uartclk was fed by tcxo/4. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> [dwalker@codeaurora.org: inlined, moved into header, added comments.] Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04fix setattr error handling in sysfs, configfsNick Piggin
sysfs and configfs setattr functions have error cases after the generic inode's attributes have been changed. Fix consistency by changing the generic inode attributes only when it is guaranteed to succeed. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04kobject: free memory if netlink_kernel_create() failsDan Carpenter
There is a kfree(ue_sk) missing on the error path if netlink_kernel_create() fails. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04lib/kobject_uevent.c: fix CONIG_NET=n warningAndrew Morton
lib/kobject_uevent.c:87: warning: 'kobj_bcast_filter' defined but not used Repairs "hotplug: netns aware uevent_helper" Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: unbind all interfaces before rebinding themAlan Stern
This patch (as1387) fixes a bug introduced during the changeover to the runtime PM framework. When a driver doesn't support resume or reset-resume, and consequently its interfaces need to be unbound and rebound, we have to unbind all the interfaces before trying to rebind any of them. Otherwise the driver's probe method for one interface could try to claim a different interface and fail, because that other interface hasn't been unbound yet. This fixes Bugzilla #15788. The symptom is that some USB sound cards don't work after hibernation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: François Valenduc <francois.valenduc@tvcablenet.be> Cc: stable <stable@kernel.org> [.34] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: serial: digi_acceleport: Eliminate a NULL pointer dereferenceJulia Lawall
If port is NULL, then the call to dev_err will dereference a value that is a small offset from NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04usb: fix ehci_hcd build failure when both generic-OF and xilinx is selectedGrant Likely
This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: cdc-acm: fix resource reclaim in error path of acm_probeAxel Lin
This patch fixes resource reclaim in error path of acm_probe: 1. In the case of "out of memory (read urbs usb_alloc_urb)\n")", there is no need to call acm_read_buffers_free(acm) here. Fix it by goto alloc_fail6 instead of alloc_fail7. 2. In the case of "out of memory (write urbs usb_alloc_urb)", usb_alloc_urb may fail in any iteration of the for loop. Current implementation does not properly free allocated snd->urb. Fix it by goto alloc_fail8 instead of alloc_fail7. 3. In the case of device_create_file(&intf->dev,&dev_attr_iCountryCodeRelDate) fail, acm->country_codes is kfreed. As a result, device_remove_file for dev_attr_wCountryCodes will not be executed in acm_disconnect. Fix it by calling device_remove_file for dev_attr_wCountryCodes before goto skip_countries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: ftdi_sio: fix DTR/RTS line modesDaniel Mack
Call set_mctrl() and clear_mctrl() according to the flow control mode selected. This makes serial communication for FT232 connected devices work when CRTSCTS is not set. This fixes a regression introduced by 4175f3e31 ("tty_port: If we are opened non blocking we still need to raise the carrier"). This patch calls the low-level driver's dtr_rts() function which consequently sets TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in cflags, however, does not reset these bits, and so data is not actually sent out on the serial wire. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: s3c-hsotg: Ensure FIFOs are fully flushed after layoutBen Dooks
According to the design guide, if the FIFO layout is changed, then the FIFOs must be flushed to ensure all FIFO pointers are correct. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: s3c-hsotg: SoftDisconnect minimum 3msBen Dooks
The shortest period SoftDisconnect can be asserted for is 3 milliseconds according to the V210 datasheet, so ensure that we add an msleep() to the registration code to enforce this. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOsBen Dooks
Some versions of the S3C HS OtG block startup with overlapping TX FIFO information, so change the fifo_init code to ensure that known values are set into the FIFO registers at initialisation/reset time. This also ensures that the FIFO RAM pointers are in a known state before use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: s3c_hsotg: define USB_GADGET_DUALSPEED in KconfigMaurus Cuelenaere
The s3c_hsotg driver sets usb_gadget->is_dualspeed to 1, yet it doesn't define USB_GADGET_DUALSPEED in Kconfig. This triggers a NULL pointer dereference in the composite driver (which is fixed in another patch). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: s3c: Enable soft disconnect during initializationThomas Abraham
Enable soft disconnect bit the OTG core during initialization. Without this, the host sees that a gadget is connected and tries to enumerate. The soft disconnect should be enabled until the USB gadget driver is registered with this otg driver. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: xhci: Print NEC firmware version.Sarah Sharp
The NEC xHCI host controller firmware version can be found by putting a vendor-specific command on the command ring and extracting the BCD encoded-version out of the vendor-specific event TRB. The firmware version debug line in dmesg will look like: xhci_hcd 0000:05:00.0: NEC firmware version 30.21 (NEC merged with Renesas Technologies and became Renesas Electronics on April 1, 2010. I have their OK to merge this vendor-specific code.) Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Satoshi Otani <satoshi.otani.xm@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: xhci: Wait for host to start running.Sarah Sharp
When the run bit is set in the xHCI command register, it may take a few microseconds for the host to start running. We cannot ring any doorbells until the host is actually running, so wait until the status register says the host is running. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Shinya Saito <shinya.saito.sx@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: xhci: Wait for controller to be ready after reset.Sarah Sharp
After software resets an xHCI host controller, it must wait for the "Controller Not Ready" (CNR) bit in the status register to be cleared. Software is not supposed to ring any doorbells or write to any registers except the status register until this bit is cleared. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: isp1362: fix inw warning on Blackfin systemsMike Frysinger
The Blackfin code is incorrectly casting the argument to inw() to a pointer. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04USB: mos7840: fix null-pointer dereferenceJohan Hovold
Fix null-pointer dereference on error path. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Eliminate us to pm ticks conversion in common path ACPI: Fix the incorrect calculation about C-state idle time ACPI: update feature-removal.txt to reflect deleted acpi=ht option ACPI / EC / PM: Fix names of functions that block/unblock EC transactions ACPI / EC / PM: Fix race between EC transactions and system suspend
2010-06-04ath5k: retain promiscuous settingBob Copeland
Commit 56d1de0a21db28e41741cfa0a66e18bc8d920554, "ath5k: clean up filter flags setting" introduced a regression in monitor mode such that the promisc filter flag would get lost. Although we set the promisc flag when it changed, we did not preserve it across subsequent calls to configure_filter. This patch restores the original functionality. Cc: stable@kernel.org Bisected-by: weedy2887@gmail.com Tested-by: weedy2887@gmail.com Tested-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ath5k: depend on CONFIG_PM_SLEEP for suspend/resume functionsTobias Doerffel
When building a kernel with CONFIG_PM=y but neither suspend nor hibernate support, the compiler complains about the static functions ath5k_pci_suspend() and ath5k_pci_resume() not being used: drivers/net/wireless/ath/ath5k/base.c:713:12: warning: ‘ath5k_pci_suspend’ defined but not used drivers/net/wireless/ath/ath5k/base.c:722:12: warning: ‘ath5k_pci_resume’ defined but not used Depending on CONFIG_PM_SLEEP rather than CONFIG_PM fixes the issue. Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04mac80211: process station blockack action frames from workJohannes Berg
Processing an association response could take a bit of time while we set up the hardware etc. During that time, the AP might already send a blockack request. If this happens very quickly on a fairly slow machine, we can end up processing the blockack request before the association processing has finished. Since the blockack processing cannot sleep right now, we also cannot make it wait in the driver. As a result, sometimes on slow machines the iwlagn driver gets totally confused, and no traffic can pass when the aggregation setup was done before the assoc setup completed. I'm working on a proper fix for this, which involves queuing all blockack category action frames from a work struct, and also allowing the ampdu_action driver callback to sleep, which will generally clean up the code and make things easier. However, this is a very involved and complex change. To fix the problem at hand in a way that can also be backported to stable, I've come up with this patch. Here, I simply process all aggregation action frames from the managed interface skb queue, which means their processing will be serialized with processing the association response, thereby fixing the problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04Revert "wireless: hostap, fix oops due to early probing interrupt"John W. Linville
This reverts commit 15920d8afc87861672e16fa95ae2764b065d6dd3. This patch was discovered to cause some hostap devices to fail to initialized. https://bugzilla.kernel.org/show_bug.cgi?id=16111 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04Merge branch 'acpi-idle' into releaseLen Brown
2010-06-04Merge branch 'sfi-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 * 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: do not return freed pointer
2010-06-04ACPI: Eliminate us to pm ticks conversion in common pathVenkatesh Pallipadi
acpi_enter_[simple|bm] routines does us to pm tick conversion on every idle wakeup and the value is only used in /proc/acpi display. We can store the time in us and convert it into pm ticks before printing instead and avoid the conversion in the common path. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-04ACPI: Fix the incorrect calculation about C-state idle timeZhao Yakui
The C-state idle time is not calculated correctly, which will return the wrong residency time in C-state. It will have the following effects: 1. The system can't choose the deeper C-state when it is idle next time. Of course the system power is increased. E.g. On one server machine about 40W idle power is increased. 2. The powertop shows that it will stay in C0 running state about 95% time although the system is idle at most time. 2.6.35-rc1 regression caused-by: 2da513f582a96c053aacc2c92873978d2ea7abff (ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion) Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reported-by: Yu Zhidong <zhidong.yu@intel.com> Tested-by: Yu Zhidong <zhidong.yu@intel.com> Acked-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-04Merge branch 'master' into for-linusAlex Elder
2010-06-04ceph: fix lease revocation when seq doesn't matchSage Weil
If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda-intel - fix wallclk variable update and condition ALSA: asihpi - Fix uninitialized variable ALSA: hda: Use LPIB for ASUS M2V usb/gadget: Replace the old USB audio FU definitions in f_audio.c ASoC: MX31ads sound support should depend on MACH_MX31ADS_WM1133_EV1 ASoC: Add missing Kconfig entry for Phytec boards ALSA: usb-audio: export UAC2 clock selectors as mixer controls ALSA: usb-audio: clean up find_audio_control_unit() ALSA: usb-audio: add UAC2 sepecific Feature Unit controls ALSA: usb-audio: unify constants from specification ALSA: usb-audio: parse clock topology of UAC2 devices ALSA: usb-audio: fix selector unit string index accessor include/linux/usb/audio-v2.h: add more UAC2 details ALSA: usb-audio: support partially write-protected UAC2 controls ALSA: usb-audio: UAC2: clean up parsing of bmaControls ALSA: hda: Use LPIB for another mainboard ALSA: hda: Use mb31 quirk for an iMac model ALSA: hda: Use LPIB for an ASUS device
2010-06-04Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2010-06-04block: make blk_init_free_list and elevator_init idempotentMike Snitzer
blk_init_allocated_queue_node may fail and the caller _could_ retry. Accommodate the unlikely event that blk_init_allocated_queue_node is called on an already initialized (possibly partially) request_queue. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-04block: avoid unconditionally freeing previously allocated request_queueMike Snitzer
On blk_init_allocated_queue_node failure, only free the request_queue if it is wasn't previously allocated outside the block layer (e.g. blk_init_queue_node was blk_init_allocated_queue_node caller). This addresses an interface bug introduced by the following commit: 01effb0 block: allow initialization of previously allocated request_queue Otherwise the request_queue may be free'd out from underneath a caller that is managing the request_queue directly (e.g. caller uses blk_alloc_queue + blk_init_allocated_queue_node). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-04perf symbols: Set the DSO long name when using symbol_conf.vmlinux_nameArnaldo Carvalho de Melo
We need to set the long name to the name specified via, for instance, 'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as '[kernel.kallsyms]' and that will make annotate fail when passing this as the vmlinux name in the call to objdump. The way this is setup grew unwieldly and dso__load_vmlinux is the function that should allocate space for the long name, with callers not assuming that filenames should be allocated somehow by then (strdup, dso__build_id_filename, etc). For now this is the minimalistic patch, a proper fix for .36 will be made. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100604003900.GD10469@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-04Input: i8042 - remove SPRUCE supportChristoph Egger
CONFIG_SPRUCE was removed from kernel around 2.6.26; let's remove the last remaining piece. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-04Input: wacom - add Cintiq 21UX2 and Intuos4 WLPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-03Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement on-demand HPA unlocking libata: use the enlarged capacity after late HPA unlock SCSI: implement sd_unlock_native_capacity() libata-sff: trivial corrections to Kconfig help text sata_nv: don't diddle with nIEN on mcp55 sata_via: magic vt6421 fix for transmission problems w/ WD drives
2010-06-03Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched, trace: Fix sched_switch() prev_state argument sched: Fix wake_affine() vs RT tasks sched: Make sure timers have migrated before killing the migration_thread
2010-06-03Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, smpboot: Fix cores per node printing on boot x86/amd-iommu: Fall back to GART if initialization fails x86/amd-iommu: Fix crash when request_mem_region fails x86/mm: Remove unused DBG() macro arch/x86/kernel: Add missing spin_unlock
2010-06-03Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/macio: Fix probing of macio devices by using the right of match table agp/uninorth: Fix oops caused by flushing too much powerpc/pasemi: Update MAINTAINERS file powerpc/cell: Fix integer constant warning powerpc/kprobes: Remove resume_execution() in kprobes powerpc/macio: Don't dereference pointer before null check
2010-06-03Merge branch 'for-linus/bugfixes' of ↵Linus Torvalds
git://xenbits.xensource.com/people/ianc/linux-2.6 * 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6: xen: avoid allocation causing potential swap activity on the resume path xen: ensure timer tick is resumed even on CPU driving the resume
2010-06-03Merge branch 'perf-fixes-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix crash in swevents perf buildid-list: Fix --with-hits event processing perf scripts python: Give field dict to unhandled callback perf hist: fix objdump output parsing perf-record: Check correct pid when forking perf: Do the comm inheritance per thread in event__process_task perf: Use event__process_task from perf sched perf: Process comm events by tid blktrace: Fix new kernel-doc warnings perf_events: Fix unincremented buffer base on partial copy perf_events: Fix event scheduling issues introduced by transactional API perf_events, trace: Fix perf_trace_destroy(), mutex went missing perf_events, trace: Fix probe unregister race perf_events: Fix races in group composition perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
2010-06-03Merge branch 'virtio' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: console: Fix crash when port is unplugged and blocked for write virtio: console: Fix crash when hot-unplugging a port and read is blocked virtio-blk: fix minimum number of S/G elements
2010-06-03Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Remove all i2c_set_clientdata(client, NULL) in drivers i2c/busses: Move two drivers to embedded section i2c: Rename i2c_check_addr to i2c_check_addr_busy i2c: Document reserved I2C addresses i2c: Check for address validity on client registration i2c: Share the I2C device presence detection code Documentation/i2c: Checkpatch cleanup
2010-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: crypto4xx - Fix build breakage n2_crypto: Plumb fallback ahash requests properly. n2_crypto: Fix MAU kmem_cache name. n2_crypto: Fix build after of_device/of_platform_driver changes.
2010-06-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
generated by cgit (git 2.34.1) at 2025-09-11 22:10:11 +0000