| Age | Commit message (Collapse) | Author |
|---|
|
The reserved_mem_init() implementations in the R5, DSP and M4 remoteproc
drivers initialize the reserved memory regions associated with the
remote processor.
Refactor these functions into the ti_k3_common.c driver as
k3_reserved_mem_init() and use this common function throughout in R5,
DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-36-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The mem_release() implementations in the TI K3 R5, DSP and M4 remoteproc
drivers release the reserved memory of the device, which get auto
triggered upon device removal.
Refactor these functions into ti_k3_common.c driver as k3_mem_release()
and use this common function in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-35-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The of_get_memories() implementations in the TI K3 R5, DSP and M4
remoteproc drivers initialize and assign memory regions used by the
remote processor in the same way. Refactor these implementations into
ti_k3_common.c driver as k3_rproc_of_get_memories() use this common
function for mem initialization in R5, DSP and M4 drivers.
Note: The TCM addresses for R5 core are configurable based on the
'loczrama' setting. Therefore, override the bus_addr assignment done by
the common function for TCMs of R5 remote processors by reading the
'loczrama' DT property in k3_r5_core_of_get_internal_memories().
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-34-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .da_to_va rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers return the Kernel virtual address for a
corresponding rproc device address.
Refactor the implementations into the ti_k3_common.c driver as
k3_rproc_da_to_va and use this common function for address translation
of DDR and internal memory regions in R5, DSP and M4 drivers.
Note: The R5 SRAM memory translations are still handled in the .da_to_va
ops of the R5 remoteproc driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-33-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .get_loaded_rsc_table rproc ops implementations in TI K3 R5, DSP and
M4 remoteproc drivers return a pointer to the resource table that was
pre-loaded at the base address of the DDR region reserved for firmware
usage.
Refactor the implementations into ti_k3_common.c driver as
k3_get_loaded_rsc_table() and register this common function as
.get_loaded_rsc_table ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-32-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .detach rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers are NOPs. Refactor the implementations into
ti_k3_common.c driver as k3_rproc_detach() and register this common
function as .detach ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-31-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .attach rproc ops implementations in TI K3 R5, DSP and M4 drivers
are NOPs. Refactor the implementations into ti_k3_common.c driver
as k3_rproc_attach() and register this common function as .attach ops in
R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-30-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .stop rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers put the remote processor into reset. Refactor the
implementations into ti_k3_common.c driver as k3_rproc_stop() and
register this common function as .stop ops in DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-29-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_start() function sets the boot vector and releases the
reset on the remote processor. Whereas, the k3_m4_rproc_start() function
only needs to release the reset.
Refactor the k3_m4_rproc_start() into ti_k3_common.c as k3_rproc_start()
and align the DSP and M4 drivers to invoke this common function when
releasing the reset on the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-28-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .unprepare rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers assert the module reset on the remote processor. Refactor the
implementations into ti_k3_common.c driver as k3_rproc_unprepare() and
register this common function as .unprepare ops in DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-27-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .prepare rproc ops implementations in TI K3 DSP and M4 remoteproc
drivers deasserts the local and module reset of the processor to allow
firmware loading into internal memory.
Refactor the implementations into the ti_k3_common.c driver as
k3_rproc_prepare() and register this common function as .prepare ops in
the DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-26-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The ti_k3_dsp_remoteproc.c driver asserts the local reset in probe
and releases the module reset in .prepare callback. This is done to
ensure the core does not execute bogus code when module reset is
deasserted.
Put both of these operations together in .prepare callback, which is
more suitable as it ensures local reset is asserted for subsequent core
start operations from sysfs. This is done to align the .prepare callback
of DSP with the M4 driver which can be factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-25-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the driver overrides the rproc ops when booting in IPC-only
mode. Remove these overrides and register the ops unconditionally. This
requires to have IPC-only mode checks in the .prepare and .unprepare ops
and returning early. The other rproc ops are invoked when booting either
in IPC-only mode or in remoteproc mode but not both.
This is done to align the rproc ops implementations of DSP driver with
M4 driver and can be factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-24-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_request_mbox() implementations in TI K3 R5, DSP and M4
remoteproc drivers acquire the mailbox channel and send the same message
through the acquired channel.
Refactor the above function into the ti_k3_common.c driver as
k3_rproc_request_mbox() and use it throughout R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-23-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The TI K3 M4 remoteproc driver acquires the mailbox channel in probe but
sends a message through the acquired channel later in .attach()/.start()
callbacks.
Put both the things together in the form of 'k3_m4_rproc_request_mbox()'
function and invoke that in the probe routine. This is done to align the
rproc_request_mbox() implementation with R5 and DSP drivers which can be
factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-22-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_release() implementations in TI K3 DSP and M4 remoteproc
drivers deassert reset in the same way. Refactor the above function into
the ti_k3_common.c driver as k3_rproc_release() and use it throughout
DSP and M4 drivers for releasing the reset from the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-21-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the TI K3 M4 remoteproc driver assumes all of the M4 devices
have local resets. Even though its true for all existing M4 devices,
keep room for future devices which possibly may not have local resets
and only have a module reset.
Therefore introduce a central function, k3_m4_rproc_release() which
handles both type of devices (with and without local resets), and use it
throughout the driver to release the remote processor from reset. Also,
for devices with local reset, Assert the module reset back in case the
local reset deassert operation failed.
This is done to align the reset release implementation with DSP
remoteproc driver and can be factored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-20-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_release() function erroneously deasserts the local
reset even for devices which do not support it. Even though it results
in a no-operation, Update the logic to explicitly deassert only the
global reset for devices that do not have a local reset.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-19-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_reset() implementations in TI K3 DSP and M4 remoteproc drivers
assert reset in the same way. Refactor the above function into the
ti_k3_common.c driver as k3_rproc_reset() and use it throughout DSP and
M4 drivers for resetting the remote processor.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-18-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, the TI K3 M4 remoteproc driver assumes all of the M4 devices
have local resets. Even though its true for all existing M4 devices,
keep room for future devices which possibly may not have local resets
and only have a module reset.
Therefore introduce a central function, k3_m4_rproc_reset() which
handles both type of devices (with and without local resets), and use it
throughout the driver to put the remote processor into reset. This is
done to align the reset implementation with DSP remoteproc driver and
can be factored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-17-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The k3_dsp_rproc_reset() function erroneously asserts the local reset
even for devices which do not support it. Even though it results in a
no-operation, Update the logic to explicitly assert the local reset for
devices that support it and only the global reset for those that do not.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-16-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .kick rproc ops implementations in TI K3 R5, DSP and M4 remoteproc
drivers sends a mailbox message to the remote processor in the same
way. Refactor the implementations into a common function
'k3_rproc_kick()' in the ti_k3_common.c driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-15-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The mailbox .rx_callback implementations in TI K3 R5, DSP and M4
remoteproc drivers handle inbound mailbox messages in the same way.
Introduce a common driver 'ti_k3_common.c' and refactor the
implementations into a common function 'k3_rproc_mbox_callback'() in it.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-14-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The TI K3 R5, DSP and M4 remoteproc drivers share the same data
structure definitions. Refactor the shared data structures into a new
common header file, 'ti_k3_common.h', and update the drivers to use the
unified data structures.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-13-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The ti_k3_m4_remoteproc.c driver previously hardcoded device memory
region addresses and names. Change this to use the k3_rproc_mem_data
structure to store memory information. This aligns with DSP and R5
drivers, and can be refactored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-12-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Add a pointer to the rproc struct within k3_m4_rproc internal struct.
This is done to align the M4 internal rproc data structure with R5
driver which can be factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-11-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Introduce a void pointer in the k3_{m4/dsp}_rproc internal data
structure which can be used to point to any private data needed by the
driver. Currently, the M4/DSP drivers do not have any private data, so
the pointer can be left pointing to NULL.
This is done to align the data structures with R5 driver which can be
factored out at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-10-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The ti_k3_r5_remoteproc.c driver previously hardcoded device memory
region addresses and names. Change this to use the k3_r5_rproc_mem_data
structure to store memory information. This aligns with K3 DSP and M4
drivers, and can be refactored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-9-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently, struct members such as mem, num_mems, reset, tsp, ti_sci and
ti_sci_id are part of the k3_r5_core structure. To align the rproc->priv
data structure of the R5 remote processor with that of the DSP and M4,
move the above members from k3_r5_core to k3_r5_rproc struct.
Additionally, introduce a void *priv pointer in k3_r5_rproc that can be
typecasted to point to the k3_r5_core structure. This abstraction is
done to ensure common functionalities across R5, DSP and M4 drivers can
be refactored at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-8-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The TI-SCI processor control handle, 'tsp', will be refactored from
k3_r5_core struct into k3_r5_rproc struct in a future commit. So, the
'tsp' pointer will be initialized inside k3_r5_cluster_rproc_init() now.
Move the k3_r5_release_tsp() function, which releases the tsp handle,
above k3_r5_cluster_rproc_init(), so that the later can register the
former as a devm action.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-7-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The internal memory struct pointer, 'mem', will be refactored from
k3_r5_core struct into k3_r5_rproc struct in a future commit.
Therefore, move the internal memory initialization function,
k3_r5_core_of_get_internal_memories() above k3_r5_cluster_rproc_init()
so that the former can be invoked by the later.
While at it, also re-order the k3_r5_core_of_get_sram_memories() to keep
all the internal memory initialization functions at one place.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-6-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The rproc_detach() function invokes __rproc_detach() before
rproc_unprepare_device(). The __rproc_detach() function sets the
rproc->state to "RPROC_DETACHED".
However, the TI K3 M4 driver erroneously looks for "RPROC_ATTACHED"
state in its .unprepare ops to identify IPC-only mode; which leads to
resetting the rproc in detach routine.
Therefore, correct the IPC-only mode detection logic to look for
"RPROC_DETACHED" in k3_m4_rproc_unprepare() function.
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250513054510.3439842-5-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The existing implementation of the waiting mechanism in
"k3_r5_cluster_rproc_init()" waits for the "released_from_reset" flag to
be set as part of the firmware boot process in "k3_r5_rproc_start()".
The "k3_r5_cluster_rproc_init()" function is invoked in the probe
routine which causes unexpected failures in cases where the firmware is
unavailable at boot time, resulting in probe failure and removal of the
remoteproc handles in the sysfs paths.
To address this, the waiting mechanism is refactored out of the probe
routine into the appropriate "k3_r5_rproc_{prepare/unprepare}()"
functions. This allows the probe routine to complete without depending
on firmware booting, while still maintaining the required
power-synchronization between cores.
Further, this wait mechanism is dropped from
"k3_r5_rproc_{start/stop}()" functions as they deal with Core Run/Halt
operations, and as such, there is no constraint in Running or Halting
the cores of a cluster in order.
Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Commit ea1d6fb5b571 ("remoteproc: k3-dsp: Acquire mailbox handle during
probe routine") introduced a check in the "k3_dsp_rproc_mbox_callback()"
and "k3_dsp_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates the
state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_dsp_rproc_kick()" and "k3_dsp_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: ea1d6fb5b571 ("remoteproc: k3-dsp: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Commit f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Add test for covering UBLK_AUTO_BUF_REG_FALLBACK:
- pass '--auto_zc_fallback' to null target, which requires both F_AUTO_BUF_REG
and F_SUPPORT_ZERO_COPY for handling UBLK_AUTO_BUF_REG_FALLBACK
- add ->buf_index() method for returning invalid buffer index to trigger
UBLK_AUTO_BUF_REG_FALLBACK
- add generic_09 for running the test
- add --auto_zc_fallback test in stress_03/stress_04/stress_05
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Enable UBLK_F_AUTO_BUF_REG support for ublk utility by argument `--auto_zc`,
meantime support this feature in null, loop and stripe target code.
Add function test generic_08 for covering basic UBLK_F_AUTO_BUF_REG feature.
Also cover UBLK_F_AUTO_BUF_REG in stress_03, stress_04 and stress_05 test too.
'fio/t/io_uring -p0 /dev/ublkb0' shows that F_AUTO_BUF_REG can improve
IOPS by 50% compared with F_SUPPORT_ZERO_COPY in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For UBLK_F_AUTO_BUF_REG, buffer is registered to uring_cmd context
automatically with the provided buffer index. User may provide one wrong
buffer index, or the specified buffer is registered by application already.
Add UBLK_AUTO_BUF_REG_FALLBACK for supporting to auto buffer registering
fallback by completing the uring_cmd and telling ublk server the
register failure via UBLK_AUTO_BUF_REG_FALLBACK, then ublk server still
can register the buffer from userspace.
So we can provide reliable way for supporting auto buffer register.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_AUTO_BUF_REG
Add UBLK_F_AUTO_BUF_REG for supporting to register buffer automatically
to local io_uring context with provided buffer index.
Add UAPI structure `struct ublk_auto_buf_reg` for holding user parameter
to register request buffer automatically, one 'flags' field is defined, and
there is still 32bit available for future extension, such as, adding one
io_ring FD field for registering buffer to external io_uring.
`struct ublk_auto_buf_reg` is populated from ublk uring_cmd's sqe->addr,
and all existing ublk commands are data-less, so it is just fine to reuse
sqe->addr for this purpose.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_SUPPORT_ZERO_COPY requires ublk server to issue explicit buffer
register/unregister uring_cmd for each IO, this way is not only inefficient,
but also introduce dependency between buffer consumer and buffer register/
unregister uring_cmd, please see tools/testing/selftests/ublk/stripe.c
in which backing file IO has to be issued one by one by IOSQE_IO_LINK.
Prepare for adding feature UBLK_F_AUTO_BUF_REG for addressing the existing
zero copy limitation:
- register request buffer automatically to ublk uring_cmd's io_uring
context before delivering io command to ublk server
- unregister request buffer automatically from the ublk uring_cmd's
io_uring context when completing the request
- io_uring will unregister the buffer automatically when uring is
exiting, so we needn't worry about accident exit
For using this feature, ublk server has to create one sparse buffer table
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to refcount_t and prepare for supporting to register bvec buffer
automatically, which needs to initialize reference counter as 2, and
kref doesn't provide this interface, so convert to refcount_t.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__run_io_and_remove() is used in several stress tests for running heavy
IO vs. removing device meantime.
However, sequential `readwrite` is taken in the fio script, which isn't
correct, we should take random IO for saturating ublk device.
Also turns out '--num_jobs=4' isn't stressful enough, so change it to
'--num_jobs=$(nproc)'.
Finally we don't cover single queue test in `test_stress_02.sh`, so add
single queue test which can trigger request tag recycling easier.
With above change the issue in #1 can be reproduced reliably in stress_02.sh.
Link:https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/ #1
Cc: Jared Holzman <jholzman@nvidia.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250519031620.245749-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
for-6.16/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.16
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally support
the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes Reinecke,
Leon Romanovsky, Gustavo A. R. Silva)"
* tag 'nvme-6.16-2025-05-20' of git://git.infradead.org/nvme: (42 commits)
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
nvme-pci: add a symolic name for the small pool size
nvme-pci: use a better encoding for small prp pool allocations
nvme-pci: rename the descriptor pools
nvme-pci: remove struct nvme_descriptor
nvme-pci: store aborted state in flags variable
nvme-pci: don't try to use SGLs for metadata on the admin queue
nvme-pci: make PRP list DMA pools per-NUMA-node
nvme-pci: factor out a nvme_init_hctx_common() helper
dmapool: add NUMA affinity support
nvme-fc: do not reference lsrsp after failure
nvmet-fcloop: don't wait for lport cleanup
nvmet-fcloop: add missing fcloop_callback_host_done
nvmet-fc: take tgtport refs for portentry
nvmet-fc: free pending reqs on tgtport unregister
nvmet-fcloop: drop response if targetport is gone
...
|
|
Executing 'perf ftrace' commands 'ftrace', 'profile' and 'latency' leave
tracing disabled as can seen in this output:
# echo 1 > /sys/kernel/debug/tracing/tracing_on
# cat /sys/kernel/debug/tracing/tracing_on
1
# perf ftrace trace --graph-opts depth=5 sleep 0.1 > /dev/null
# cat /sys/kernel/debug/tracing/tracing_on
0
#
The 'tracing_on' file is not restored to its value before the command.
To fix that this patch uses the .../tracing/instances/XXX subdirectory
feature.
Each 'perf ftrace' invocation creates its own session/process
specific subdirectory and does not change the global state
in the .../tracing directory itself.
Use rmdir(../tracing/instances/dir) to stop process/session specific
tracing and delete all process/session specific setings.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20250520093726.2009696-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This adds a compatible string for the SPI controller on RK3528.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250520100102.1226725-2-amadeus@jmu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fix from Mike Marshall:
"Fix for orangefs page writeout counting"
* tag 'for-linus-6.15-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: adjust counting code to recover from 665575cf
|
|
The decompressor is built with the default C dialect, which is now gnu23
on gcc-15, and this clashes with the kernel's bool type definition:
In file included from include/uapi/linux/posix_types.h:5,
from arch/parisc/boot/compressed/misc.c:7:
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
Add the -std=gnu11 argument here, as we do for all other architectures.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
To pick up the changes in this cset:
0312e94abe484b9e ("treewide: fix typo 'unsigned __init128' -> 'unsigned __int128'")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
This required picking the const_true() define in linux/compiler.h as a
prep patch as that macro is used in the new linux/bits.h
Please see tools/include/uapi/README for further details.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250519214126.1652491-8-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The sync of include/linux/bits.h with the kernel sources will make use
of this define, so add it to the tools/include/linux/compiler. variant
used to build tools/ living code.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250519214126.1652491-7-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in this cset:
1e7933a575ed8af4 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/bits.h include/uapi/linux/bits.h
Please see tools/include/uapi/README for further details.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: I Hsin Cheng <richard120310@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250519214126.1652491-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
