| Age | Commit message (Collapse) | Author |
|---|
|
To pick up the changes in:
acea9943271b6290 ("vdso: Address variable shadowing in macros")
Addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/unaligned.h include/linux/unaligned.h
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peng Jiang <jiang.peng9@zte.com.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250519214126.1652491-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Indirect Target Selection (ITS) bits
To pick the changes from:
24ee8d9432b5744f ("x86/CPU/AMD: Add X86_FEATURE_ZEN6")
2665281a07e19550 ("x86/its: Add "vmexit" option to skip mitigation on some CPUs")
8754e67ad4ac692c ("x86/its: Add support for ITS-safe indirect thunk")
159013a7ca18c271 ("x86/its: Enumerate Indirect Target Selection (ITS) bug")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20250519214126.1652491-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from these csets:
159013a7ca18c271 ("x86/its: Enumerate Indirect Target Selection (ITS) bug")
That cause no changes to tooling as it doesn't include a new MSR to be
captured by the tools/perf/trace/beauty/tracepoints/x86_msr.sh script,
for instance:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh | head
static const char * const x86_MSRs[] = {
[0x00000000] = "IA32_P5_MC_ADDR",
[0x00000001] = "IA32_P5_MC_TYPE",
[0x00000010] = "IA32_TSC",
[0x00000017] = "IA32_PLATFORM_ID",
[0x0000001b] = "IA32_APICBASE",
[0x00000020] = "KNC_PERFCTR0",
[0x00000021] = "KNC_PERFCTR1",
[0x00000028] = "KNC_EVNTSEL0",
[0x00000029] = "KNC_EVNTSEL1",
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for further details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250519214126.1652491-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
a940e0a685575424 ("vhost: fix VHOST_*_OWNER documentation")
That just changed lines in comments
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Please see tools/include/uapi/README for further details.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250519214126.1652491-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit 611851010c74046c ("fs: dedup handling of struct filename
init and refcounts bumps"), the kernel has been refactored to use a new
inline function initname(), moving name initialization into it.
As a result, the perf probe test can no longer find the source line that
matches the defined regular expressions. This causes the script to fail
when attempting to add probes.
Add a regular expression to search for the call site of initname(). This
provides a valid source line number for adding the probe. Keeps the
older regular expressions for passing test on older kernels.
Fixes: 611851010c74046c ("fs: dedup handling of struct filename init and refcounts bumps")
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Brnak <jbrnak@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250519082755.1669187-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com
|
|
There'll be possible race scenario for coresight config:
CPU0 CPU1
(perf enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
<iterating config_csdev_list> cscfg_remove_owned_csdev_configs()
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
iterating config_csdev_list could be raced with config_csdev_list's
entry delete.
To resolve this race , hold csdev->cscfg_csdev_lock() while
cscfg_remove_owned_csdev_configs()
Fixes: 02bd588e12df ("coresight: configuration: Update API to permit dynamic load/unload")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-3-yeoreum.yun@arm.com
|
|
When etm4 device is disabled via sysfs, it should disable its active
count.
Fixes: 7ebd0ec6cf94 ("coresight: configfs: Allow configfs to activate configuration")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-2-yeoreum.yun@arm.com
|
|
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/88967.1743099372@localhost
Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In sunxi_nfc_hw_ecc_read_chunk(), the sunxi_nfc_randomizer_enable() is
called without the config of randomizer. A proper implementation can be
found in sunxi_nfc_hw_ecc_read_chunks_dma().
Add sunxi_nfc_randomizer_config() before the start of randomization.
Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support")
Cc: stable@vger.kernel.org # v4.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Block devices can be opened read-write even if they can't be written to
for historic reasons. Remove the check requiring file->f_op->write_iter
when the block devices was opened in loop_configure. The call to
loop_check_backing_file just below ensures the ->write_iter is present
for backing files opened for writing, which is the only check that is
actually needed.
Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter")
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250520135420.1177312-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Timestamps in the trace data appear as all zeros on recent kernels,
although the feature works correctly on old kernels (e.g., v6.12).
Since commit c382ee674c8b ("arm64/sysreg/tools: Move TRFCR definitions
to sysreg"), the TRFCR_ELx_TS_{VIRTUAL|GUEST_PHYSICAL|PHYSICAL} macros
were updated to remove the bit shift. As a result, the driver no longer
shifts bits when operates the timestamp field.
Fix this by using the FIELD_PREP() and FIELD_GET() helpers.
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Fixes: c382ee674c8b ("arm64/sysreg/tools: Move TRFCR definitions to sysreg")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250519174945.2245271-2-leo.yan@arm.com
|
|
Fix errno typo in kernel-doc comments.
Fixes: 7cbebc86c72a ("PCI: dwc: ep: Add Kernel-doc comments for APIs")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250506095138.482485-2-cassel@kernel.org
|
|
A late commit to 6.14-rc7! broke orangefs. 665575cf seems like a
good change, but maybe should have been introduced during the merge
window. This patch adjusts the counting code associated with
writing out pages so that orangefs works in a 665575cf world.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Whenever there is a change in the country code settings from the
user, driver does an intersection of the regulatory rules for this
new country with the original regulatory rules which were reported
during initialization time.
There is also similar logic running in firmware with a difference
that the intersection in firmware is only done when the country code
is configuration during boot up time (BDF/OTP). Firmware logic does
not kick in when no country code is configured during device bring
up time as the device is always expected to have the country code
configured properly in the deployment.
There is a debug/test use case that requires absolute regulatory
rules to be used for a user configured country code when the device
is not configured with a particular country code during boot up time.
To support the above test use case, remove the redundant regulatory
rules intersection logic in the host driver. Depend on the
intersection logic in firmware when the device comes up with
pre-configured country code.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aishwarya R <quic_aisr@quicinc.com>
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Link: https://patch.msgid.link/20250505034351.1365914-1-quic_rajson@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
During association, firmware will use this MCS15 flag to enable or
disable the reception of PPDU with EHT-MCS15 capability.
Send MCS15 support to firmware through WMI command during peer assoc.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505153536.3275145-1-quic_mkumarg@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Remove intermediate scatter-gather table completely and
enable new DMA link API.
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/f71638d50c9c79a462f2e0423501b1de77617656.1747747694.git.leon@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Change the creation of mkey to be performed in multiple steps:
data allocation, DMA setup and actual call to HW to create that mkey.
In this new flow, the whole input to MKEY command is saved to eliminate
the need to keep array of pointers for DMA addresses for receive list
and in the future patches for send list too.
In addition to memory size reduce and elimination of unnecessary data
movements to set MKEY input, the code is prepared for future reuse.
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/d4ad0384fbd1e23a607cbbe9e5756748f3a761d9.1747747694.git.leon@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
allocated_length is a multiple of page size and number of pages,
so let's change the functions to accept number of pages. This improves
code readability, simplifies buffer handling, and enables combining DMA
send/receive operations, as will be introduced in the next patches.
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/76f39993d2ca0311b3bcfe56038a669d03926815.1747747694.git.leon@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux into v6.16/vfio/next
Merge two step DMA mapping API as basis for mlx5-vfio-pci uses.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
fstest generic/388 occasionally reproduces a crash that looks as
follows:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
ext4_block_zero_page_range+0x30c/0x380 [ext4]
ext4_truncate+0x436/0x440 [ext4]
ext4_process_orphan+0x5d/0x110 [ext4]
ext4_orphan_cleanup+0x124/0x4f0 [ext4]
ext4_fill_super+0x262d/0x3110 [ext4]
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x26/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4ed/0x6b0
do_syscall_64+0x82/0x170
...
This occurs when processing a symlink inode from the orphan list. The
partial block zeroing code in the truncate path calls
ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls
mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an
a_ops vector in ext4, hence the crash.
To avoid this problem, update the ext4_dirty_journalled_data() helper to
only mark the folio dirty on regular files (for which a_ops is
assigned). This also matches the journaling logic in the ext4_symlink()
creation path, where ext4_handle_dirty_metadata() is called directly.
Fixes: d84c9ebdac1e ("ext4: Mark pages with journalled data dirty")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20250516173800.175577-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
Add an initial documentation around atomic writes support in ext4.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/d3893b9f5ad70317abae72046e81e4c180af91bf.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Last couple of patches added the needed support for multi-fsblock atomic
writes using bigalloc. This patch ensures that filesystem advertizes the
needed atomic write unit min and max values for enabling multi-fsblock
atomic write support with bigalloc.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Co-developed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/5e45d7ed24499024b9079436ba6698dae5298e29.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
EXT4 supports bigalloc feature which allows the FS to work in size of
clusters (group of blocks) rather than individual blocks. This patch
adds atomic write support for bigalloc so that systems with bs = ps can
also create FS using -
mkfs.ext4 -F -O bigalloc -b 4096 -C 16384 <dev>
With bigalloc ext4 can support multi-fsblock atomic writes. We will have to
adjust ext4's atomic write unit max value to cluster size. This can then support
atomic write of size anywhere between [blocksize, clustersize]. This
patch adds the required changes to enable multi-fsblock atomic write
support using bigalloc in the next patch.
In this patch for block allocation:
we first query the underlying region of the requested range by calling
ext4_map_blocks() call. Here are the various cases which we then handle
depending upon the underlying mapping type:
1. If the underlying region for the entire requested range is a mapped extent,
then we don't call ext4_map_blocks() to allocate anything. We don't need to
even start the jbd2 txn in this case.
2. For an append write case, we create a mapped extent.
3. If the underlying region is entirely a hole, then we create an unwritten
extent for the requested range.
4. If the underlying region is a large unwritten extent, then we split the
extent into 2 unwritten extent of required size.
5. If the underlying region has any type of mixed mapping, then we call
ext4_map_blocks() in a loop to zero out the unwritten and the hole regions
within the requested range. This then provide a single mapped extent type
mapping for the requested range.
Note: We invoke ext4_map_blocks() in a loop with the EXT4_GET_BLOCKS_ZERO
flag only when the underlying extent mapping of the requested range is
not entirely a hole, an unwritten extent, or a fully mapped extent. That
is, if the underlying region contains a mix of hole(s), unwritten
extent(s), and mapped extent(s), we use this loop to ensure that all the
short mappings are zeroed out. This guarantees that the entire requested
range becomes a single, uniformly mapped extent. It is ok to do so
because we know this is being done on a bigalloc enabled filesystem
where the block bitmap represents the entire cluster unit.
Note having a single contiguous underlying region of type mapped,
unwrittn or hole is not a problem. But the reason to avoid writing on
top of mixed mapping region is because, atomic writes requires all or
nothing should get written for the userspace pwritev2 request. So if at
any point in time during the write if a crash or a sudden poweroff
occurs, the region undergoing atomic write should read either complete
old data or complete new data. But it should never have a mix of both
old and new data.
So, we first convert any mixed mapping region to a single contiguous
mapped extent before any data gets written to it. This is because
normally FS will only convert unwritten extents to written at the end of
the write in ->end_io() call. And if we allow the writes over a mixed
mapping and if a sudden power off happens in between, we will end up
reading mix of new data (over mapped extents) and old data (over
unwritten extents), because unwritten to written conversion never went
through.
So to avoid this and to avoid writes getting torned due to mixed
mapping, we first allocate a single contiguous block mapping and then
do the write.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Co-developed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/c4965ac3407cbc773f0bc954d0966d9696f5038a.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There can be a case where there are contiguous extents on the adjacent
leaf nodes of on-disk extent trees. So when someone tries to write to
this contiguous range, ext4_map_blocks() call will split by returning
1 extent at a time if this is not already cached in extent_status tree
cache (where if these extents when cached can get merged since they are
contiguous).
This is fine for a normal write however in case of atomic writes, it
can't afford to break the write into two. Now this is also something
that will only happen in the slow write case where we call
ext4_map_blocks() for each of these extents spread across different leaf
nodes. However, there is no guarantee that these extent status cache
cannot be reclaimed before the last call to ext4_map_blocks() in
ext4_map_blocks_atomic_write_slow().
Hence this patch adds support of EXT4_GET_BLOCKS_QUERY_LEAF_BLOCKS.
This flag checks if the requested range can be fully found in extent
status cache and return. If not, it looks up in on-disk extent
tree via ext4_map_query_blocks(). If the found extent is the last entry
in the leaf node, then it goes and queries the next lblk to see if there
is an adjacent contiguous extent in the adjacent leaf node of the
on-disk extent tree.
Even though there can be a case where there are multiple adjacent extent
entries spread across multiple leaf nodes. But we only read an adjacent
leaf block i.e. in total of 2 extent entries spread across 2 leaf nodes.
The reason for this is that we are mostly only going to support atomic
writes with upto 64KB or maybe max upto 1MB of atomic write support.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Co-developed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/6bb563e661f5fbd80e266a9e6ce6e29178f555f6.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Let's make ext4_meta_trans_blocks() non-static for use in later
functions during ->end_io conversion for atomic writes.
We will need this function to estimate journal credits for a special
case. Instead of adding another wrapper around it, let's make this
non-static.
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/23ce80d4286f792831ce99d13558182ee228fedb.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
EXT4 only supports doing atomic write on inodes which uses extents, so
add a check in ext4_inode_can_atomic_write() which gets called during
open.
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/86bb502c979398a736ab371d8f35f6866a477f6c.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_iomap_overwrite_begin() clears the flag for IOMAP_WRITE before
calling ext4_iomap_begin(). Document this above ext4_map_blocks() call
as it is easy to miss it when focusing on write paths alone.
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/fd50ba05440042dff77d555e463a620a79f8d0e9.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since jbd2_superblock_csum() no longer uses its journal_t argument,
remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250513053809.699974-5-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since jbd2_chksum() no longer uses its journal_t argument, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250513053809.699974-4-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since ext4_superblock_csum() no longer uses its sb argument, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250513053809.699974-3-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since ext4_chksum() no longer uses its sbi argument, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250513053809.699974-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Besides fsverity, fscrypt, and the data=journal mode, ext4 now supports
large folios for regular files. Enable this feature by default. However,
since we cannot change the folio order limitation of mappings on active
inodes, setting the journal=data mode via ioctl on an active inode will
not take immediate effect in non-delalloc mode.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
move_extent_per_page() currently assumes that each folio is the size of
PAGE_SIZE and only copies data for one page. ext4_move_extents() should
call move_extent_per_page() for each page. To support larger folios,
simply modify the calculations for the block start and end offsets
within the folio based on the provided range of 'data_offset_in_page'
and 'block_len_in_page'. This function will continue to handle PAGE_SIZE
of data at a time and will not convert this function to manage an entire
folio. Additionally, we use the source folio to copy data, so it doesn't
matter if the source and dest folios are different in size.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In mpage_map_and_submit_buffers(), the 'lblk' is now aligned to
PAGE_SIZE. Convert it to be aligned to folio size. Additionally, modify
the wbc->nr_to_write update to reduce the number of pages in a single
folio, ensuring that the entire writeback path can support large folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The journal credits calculation in ext4_ext_index_trans_blocks() is
currently inadequate. It only multiplies the depth of the extents tree
and doesn't account for the blocks that may be required for adding the
leaf extents themselves.
After enabling large folios, we can easily run out of handle credits,
triggering a warning in jbd2_journal_dirty_metadata() on filesystems
with a 1KB block size. This occurs because we may need more extents when
iterating through each large folio in
ext4_do_writepages()->mpage_map_and_submit_extent(). Therefore, we
should modify ext4_ext_index_trans_blocks() to include a count of the
leaf extents in the worst case as well.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
jbd2_journal_blocks_per_page() returns the number of blocks in a single
page. Rename it to jbd2_journal_blocks_per_folio() and make it returns
the number of blocks in the largest folio, preparing for the calculation
of journal credits blocks when allocating blocks within a large folio in
the writeback path.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The partial block zero range helper __ext4_block_zero_page_range()
currently only supports folios of PAGE_SIZE in size. The calculations
for the start block and the offset within a folio for the given range
are incorrect. Modify the implementation to use offset_in_folio()
instead of directly masking PAGE_SIZE - 1, which will be able to support
for large folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The current buffered write path in ext4 can only allocate and handle
folios of PAGE_SIZE size. To support larger folios, modify
ext4_da_write_begin() and ext4_write_begin() to allocate higher-order
folios, and trim the write length if it exceeds the folio size.
Additionally, in ext4_da_do_write_end(), use offset_in_folio() instead
of PAGE_SIZE.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mpage_readpages() currently assumes that each folio is the size of
PAGE_SIZE. Modify it to atomically calculate the number of blocks per
folio and iterate through the blocks in each folio, which would allow
for support of larger folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250512063319.3539411-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The inode i_size cannot be larger than maxbytes, check it while loading
inode from the disk.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
There are several locations that get the correct maxbytes value based on
the inode's block type. It would be beneficial to extract a common
helper function to make the code more clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
For the extents based inodes, the maxbytes should be sb->s_maxbytes
instead of sbi->s_bitmap_maxbytes. Additionally, for the calculation of
max_end, the -sb->s_blocksize operation is necessary only for
indirect-block based inodes. Correct the maxbytes and max_end value to
correct the behavior of punch hole.
Fixes: 2da376228a24 ("ext4: limit length to bitmap_maxbytes - blocksize in punch_hole")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Punching a hole with a start offset that exceeds max_end is not
permitted and will result in a negative length in the
truncate_inode_partial_folio() function while truncating the page cache,
potentially leading to undesirable consequences.
A simple reproducer:
truncate -s 9895604649994 /mnt/foo
xfs_io -c "pwrite 8796093022208 4096" /mnt/foo
xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo
kernel BUG at include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110
RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287
RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000
RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000
RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000
R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005
R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000
FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
truncate_inode_partial_folio+0x3dd/0x620
truncate_inode_pages_range+0x226/0x720
? bdev_getblk+0x52/0x3e0
? ext4_get_group_desc+0x78/0x150
? crc32c_arch+0xfd/0x180
? __ext4_get_inode_loc+0x18c/0x840
? ext4_inode_csum+0x117/0x160
? jbd2_journal_dirty_metadata+0x61/0x390
? __ext4_handle_dirty_metadata+0xa0/0x2b0
? kmem_cache_free+0x90/0x5a0
? jbd2_journal_stop+0x1d5/0x550
? __ext4_journal_stop+0x49/0x100
truncate_pagecache_range+0x50/0x80
ext4_truncate_page_cache_block_range+0x57/0x3a0
ext4_punch_hole+0x1fe/0x670
ext4_fallocate+0x792/0x17d0
? __count_memcg_events+0x175/0x2a0
vfs_fallocate+0x121/0x560
ksys_fallocate+0x51/0xc0
__x64_sys_fallocate+0x24/0x40
x64_sys_call+0x18d2/0x4170
do_syscall_64+0xa7/0x220
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by filtering out cases where the punching start offset exceeds
max_end.
Fixes: 982bf37da09d ("ext4: refactor ext4_punch_hole()")
Reported-by: Liebes Wang <wanghaichi0403@gmail.com>
Closes: https://lore.kernel.org/linux-ext4/ac3a58f6-e686-488b-a9ee-fc041024e43d@huawei.com/
Tested-by: Liebes Wang <wanghaichi0403@gmail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Since handle->h_transaction may be a NULL pointer, so we should change it
to call is_handle_aborted(handle) first before dereferencing it.
And the following data-race was reported in my fuzzer:
==================================================================
BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata
write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1:
jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556
__ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358
ext4_do_update_inode fs/ext4/inode.c:5220 [inline]
ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869
__ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074
ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103
....
read to 0xffff888011024104 of 4 bytes by task 10880 on cpu 0:
jbd2_journal_dirty_metadata+0xf2/0x770 fs/jbd2/transaction.c:1512
__ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358
ext4_do_update_inode fs/ext4/inode.c:5220 [inline]
ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869
__ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074
ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103
....
value changed: 0x00000000 -> 0x00000001
==================================================================
This issue is caused by missing data-race annotation for jh->b_modified.
Therefore, the missing annotation needs to be added.
Reported-by: syzbot+de24c3fe3c4091051710@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=de24c3fe3c4091051710
Fixes: 6e06ae88edae ("jbd2: speedup jbd2_journal_dirty_metadata()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250514130855.99010-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Use writeback_iter directly instead of write_cache_pages for a nicer
code structure and less indirect calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250505091604.3449879-1-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Luis and David are reporting that after running generic/750 test for 90+
hours on 2k ext4 filesystem, they are able to trigger a warning in
jbd2_journal_dirty_metadata() complaining that there are not enough
credits in the running transaction started in ext4_do_writepages().
Indeed the code in ext4_do_writepages() is racy and the extent tree can
change between the time we compute credits necessary for extent tree
computation and the time we actually modify the extent tree. Thus it may
happen that the number of credits actually needed is higher. Modify
ext4_ext_index_trans_blocks() to count with the worst case of maximum
tree depth. This can reduce the possible number of writers that can
operate in the system in parallel (because the credit estimates now won't
fit in one transaction) but for reasonably sized journals this shouldn't
really be an issue. So just go with a safe and simple fix.
Link: https://lore.kernel.org/all/20250415013641.f2ppw6wov4kn4wq2@offworld
Reported-by: Davidlohr Bueso <dave@stgolabs.net>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops@lists.linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250429175535.23125-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
New HP ZBook with Realtek HDA codec ALC3247 needs the quirk
ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520132101.120685-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP Agusta.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
strcpy() is deprecated; use strscpy() instead.
Both the destination and source buffer are of fixed length
so strscpy with 2-arguments is used.
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Siddarth Gundu <siddarthsgml@gmail.com>
Link: https://patch.msgid.link/20250520113012.70270-1-siddarthsgml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
