| Age | Commit message (Collapse) | Author |
|---|
|
bnxt_check_rings() is called to ensure that we have the hardware ring
resources before committing to reinitialize with the new number of
rings. MSIX vectors are never checked at this point, because up
until recently we must first disable MSIX before we can allocate the
new set of MSIX vectors.
Now that we support dynamic MSIX allocation, check to make sure we
can dynamically allocate the new MSIX vectors as the last step in
bnxt_check_rings() if dynamic MSIX is supported.
For example, the IOMMU group may limit the number of MSIX vectors
for the device. With this patch, the ring change will fail more
gracefully when there is not enough MSIX vectors.
It is also better to move bnxt_check_rings() to be called as the last
step when changing ethtool rings.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If RocE is supported on the device, set the number of RoCE MSIX vectors
to the number of online CPUs + 1 and capped at these maximums:
VF: 2
NPAR: 5
PF: 64
For the PF, the maximum is now increased from the previous value
of 9 to get better performance for kernel applications.
Remove the unnecessary check for BNXT_FLAG_ROCE_CAP.
bnxt_set_dflt_ulp_msix() will only be called if the flag is set.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20240909172342.487675-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sean Anderson says:
====================
net: xilinx: axienet: Partial checksum offload improvements
Partial checksum offload is not always used when it could be.
Enable it in more cases.
====================
Link: https://patch.msgid.link/20240909161016.1149119-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The partial rx checksum feature computes a checksum over the entire
packet, regardless of the L3 protocol. Remove the check for IPv4.
Additionally, testing with csum.py (from kselftests) shows no anomalies
with 64-byte packets, so we can remove that check as well.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909161016.1149119-5-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When it is supported by hardware, we enable receive checksum offload
unconditionally. Update features to reflect this.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240909161016.1149119-4-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Partial tx chechsumming is completely generic and does not depend on the
L3/L4 protocol. Signal this to the net subsystem by enabling the
more-generic offload feature (instead of restricting ourselves to
TCP/UDP over IPv4 checksumming only like is necessary with full
checksumming).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909161016.1149119-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These variables are set but never used. Remove them.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20240909161016.1149119-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in the struct field tx_underun, rename
it to tx_underrun.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909134612.63912-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in the struct field tx_underun, rename
it to tx_underrun.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sch_cake uses a cache of the first 16 values of the inverse square root
calculation for the Cobalt AQM to save some cycles on the fast path.
This cache is populated when the qdisc is first loaded, but there's
really no reason why it can't just be pre-populated. So change it to be
pre-populated with constants, which also makes it possible to constify
it.
This gives a modest space saving for the module (not counting debug data):
.text: -224 bytes
.rodata: +80 bytes
.bss: -64 bytes
Total: -192 bytes
Signed-off-by: Dave Taht <dave.taht@gmail.com>
[ fixed up comment, rewrote commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20240909091630.22177-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add net/ethtool/pse-pd.c to PSE NETWORK DRIVER to receive emails concerning
modifications to the ethtool part.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909114336.362174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove magic number 7 by introducing a GENMASK macro instead.
Remove magic number 0x80 by using the BIT macro instead.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240909134301.75448-1-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-timestamp-introduce-a-flag-to-filter-out-rx-software-and-hardware-report'
Jason Xing says:
====================
net-timestamp: introduce a flag to filter out rx software and hardware report
When one socket is set SOF_TIMESTAMPING_RX_SOFTWARE which means the
whole system turns on the netstamp_needed_key button, other sockets
that only have SOF_TIMESTAMPING_SOFTWARE will be affected and then
print the rx timestamp information even without setting
SOF_TIMESTAMPING_RX_SOFTWARE generation flag.
How to solve it without breaking users?
We introduce a new flag named SOF_TIMESTAMPING_OPT_RX_FILTER. Using
it together with SOF_TIMESTAMPING_SOFTWARE can stop reporting the
rx software timestamp.
Similarly, we also filter out the hardware case where one process
enables the rx hardware generation flag, then another process only
passing SOF_TIMESTAMPING_RAW_HARDWARE gets the timestamp. So we can set
both SOF_TIMESTAMPING_RAW_HARDWARE and SOF_TIMESTAMPING_OPT_RX_FILTER
to stop reporting rx hardware timestamp after this patch applied.
v6: https://lore.kernel.org/20240906095640.77533-1-kerneljasonxing@gmail.com
v5: https://lore.kernel.org/20240905071738.3725-1-kerneljasonxing@gmail.com
v4: https://lore.kernel.org/20240830153751.86895-1-kerneljasonxing@gmail.com
v3: https://lore.kernel.org/20240828160145.68805-1-kerneljasonxing@gmail.com
v2: https://lore.kernel.org/20240825152440.93054-1-kerneljasonxing@gmail.com
====================
Link: https://patch.msgid.link/20240909015612.3856-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test a few possible cases where we use SOF_TIMESTAMPING_OPT_RX_FILTER
with software or hardware report/generation flag.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.
Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.
Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."
Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.
Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SOF_TIMESTAMPING_RAW_HARDWARE is a report flag which passes the
timestamps generated by either SOF_TIMESTAMPING_TX_HARDWARE or
SOF_TIMESTAMPING_RX_HARDWARE to the userspace all the time.
So let us revise the doc here.
Link: https://lore.kernel.org/all/66d8c21d3042a_163d93294cb@willemb.c.googlers.com.notmuch/
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20240908124141.39628-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Furong Xu says:
====================
net: stmmac: FPE via ethtool + tc
Move the Frame Preemption(FPE) over to the new standard API which uses
ethtool-mm/tc-mqprio/tc-taprio.
====================
Link: https://patch.msgid.link/cover.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool --show-mm can get real-time state of FPE.
fpe_irq_status logs should keep quiet.
tc-taprio can always query driver state, delete unbalanced logs.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/39943d7967f291674a97ef0572878aca273087e9.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc-taprio can select whether traffic classes are express or preemptible.
0) tc qdisc add dev eth1 parent root handle 100 taprio \
num_tc 4 \
map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 1000000000 \
sched-entry S 03 10000000 \
sched-entry S 0e 10000000 \
flags 0x2 fp P E E E
1) After some traffic tests, MAC merge layer statistics are all good.
Local device:
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 0,
"MACMergeFragCountRx": 0,
"MACMergeFragCountTx": 17837,
"MACMergeHoldCount": 18639
}
} ]
Remote device:
[ {
"ifname": "end1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 17189,
"MACMergeFragCountRx": 17837,
"MACMergeFragCountTx": 0,
"MACMergeHoldCount": 0
}
} ]
Tested on DWMAC CORE 5.10a
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/0d21ae356fb3cab77337527e87d46748a4852055.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc-mqprio can select whether traffic classes are express or preemptible.
After some traffic tests, MAC merge layer statistics are all good.
Local device:
ethtool --include-statistics --json --show-mm eth1
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 0,
"MACMergeFragCountRx": 0,
"MACMergeFragCountTx": 35105,
"MACMergeHoldCount": 0
}
} ]
Remote device:
ethtool --include-statistics --json --show-mm end1
[ {
"ifname": "end1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 35105,
"MACMergeFragCountRx": 35105,
"MACMergeFragCountTx": 0,
"MACMergeHoldCount": 0
}
} ]
Tested on DWMAC CORE 5.10a
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/592965ea93ed8240f0a1b8f6f8ebb8914f69419b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ethtool --show-mm and --set-mm callbacks.
NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm,
all tested okay.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/06ed409314fe0ee37b78b800922f2c0cce762532.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop driver defined stmmac_fpe_state, and switch to common
ethtool_mm_verify_status for local TX verification status.
Local side and remote side verification processes are completely
independent. There is no reason at all to keep a local state and
a remote state.
Add a spinlock to avoid races among ISR, timer, link update
and register configuration.
This patch is based on Vladimir Oltean's proposal.
Vladimir Oltean says:
====================
In the INITIAL state, the timer sends MPACKET_VERIFY. Eventually the
stmmac_fpe_event_status() IRQ fires and advances the state to VERIFYING,
then rearms the timer after verify_time ms. If a subsequent IRQ comes in
and modifies the state to SUCCEEDED after getting MPACKET_RESPONSE, the
timer sees this. It must enable the EFPE bit now. Otherwise, it
decrements the verify_limit counter and tries again. Eventually it
moves the status to FAILED, from which the IRQ cannot move it anywhere
else, except for another stmmac_fpe_apply() call.
====================
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/151f86c8428eba967039718c6bf90a7d841e703b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool --set-mm can trigger FPE verification process by calling
stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/42018b1a15eb3ced567fd6a73798c7cd4e08799a.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg
becomes platform-data eventually, instead of a run-time config.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de85600d ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future.
Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make code cleaner, there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-8-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that 'bfqq_already_existing' is only used in one branch, it can be
removed. There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The local variable is used to call bfq_bfqq_resume_state() later,
since 'bfqd->lock' is held, and bfqq status will not change between
setting 'split' and calling bfq_bfqq_resume_state(), move forward
bfq_bfqq_resume_state() so that 'split' can be removed. There are no
functional chagnes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not used, hence can be removed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Because bfq_put_cooperator() is always followed by
bfq_release_process_ref().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Fixes: 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, blk-throttle handle all IO fifo, hence if data IO is
throttled and then meta IO is dispatched, the meta IO will have to wait
for the data IO, causing priority inversion problems.
This patch support to handle metadata first and then pay debt while
throttling data.
Test script: use cgroup v1 to throttle root cgroup, then create new
dir and file while write back is throttled
test() {
mkdir /mnt/test/xxx
touch /mnt/test/xxx/1
sync /mnt/test/xxx
sync /mnt/test/xxx
}
mkfs.ext4 -F /dev/nvme0n1 -E lazy_itable_init=0,lazy_journal_init=0
mount /dev/nvme0n1 /mnt/test
echo "259:0 $((1024*1024))" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device
dd if=/dev/zero of=/mnt/test/foo1 bs=16M count=1 conv=fdatasync status=none &
sleep 4
time test
echo "259:0 0" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device
sleep 1
umount /dev/nvme0n1
Test result: time cost for creating new dir and file
before this patch: 14s
after this patch: 0.1s
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240903135149.271857-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
last_low_overflow_time is not used anymore after commit bf20ab538c81
("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW").
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240903135149.271857-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per the comments, these are variable sized arrays.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531)
Cc: stable@vger.kernel.org
|
|
Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3d5adbdf1d01708777f2eda375227cbf7a98b9fe)
Cc: stable@vger.kernel.org
|
|
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88dcad2d07c8d82e6a097c8e74239eb67333bcf7)
Cc: stable@vger.kernel.org
|
|
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fedf6db3ea9dc5eda0b78cfbbb8f7a88b97e5b24)
|
|
update the features set on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25d48f2eb0af1f0e6f09f54a1a1716f48c0722c9)
|
|
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 578aab4ecc73476393389440724b7a391cc0cea9)
|
|
While arch/*/mem/ptdump handles the kernel pagetable dumping code,
introduce KVM/ptdump to show the guest stage-2 pagetables. The
separation is necessary because most of the definitions from the
stage-2 pagetable reside in the KVM path and we will be invoking
functionality specific to KVM. Introduce the PTDUMP_STAGE2_DEBUGFS config.
When a guest is created, register a new file entry under the guest
debugfs dir which allows userspace to show the contents of the guest
stage-2 pagetables when accessed.
[maz: moved function prototypes from kvm_host.h to kvm_mmu.h]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-6-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ptdump uses the init_mm structure directly to dump the kernel
pagetables. When ptdump is called on the stage-2 pagetables, this mm
argument is not used. Prevent the level from being overwritten by
checking the argument against NULL.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-5-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rename the attributes description array to allow the parsing method
to use the description from a local context. To be able to do this,
store a pointer to the description array in the state structure. This
will allow for the later introduced callers (stage_2 ptdump) to specify
their own page table description format to the ptdump parser.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-4-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Reuse the descriptor parsing functionality to keep the same output format
as the original ptdump code. In order for this to happen, move the state
tracking objects into a common header.
[maz: Fixed note_page() stub as suggested by Will]
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240909124721.1672199-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5)
Cc: stable@vger.kernel.org
|
|
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643)
Cc: stable@vger.kernel.org
|
|
Populate cache line size info in topology based on information from IP
discovery table.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e9fadacddca96a2e6fcee9cc9488b78eb7a6953)
|
