summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-01vringh: IOTLB supportJason Wang
This patch implements the third memory accessor for vringh besides current kernel and userspace accessors. This idea is to allow vringh to do the address translation through an IOTLB which is implemented via vhost_map interval tree. Users should setup and IOVA to PA mapping in this IOTLB. This allows us to: - Use vringh to access virtqueues with vIOMMU - Use vringh to implement software virtqueues for vDPA devices Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-5-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-01vhost: factor out IOTLBJason Wang
This patch factors out IOTLB into a dedicated module in order to be reused by other modules like vringh. User may choose to enable the automatic retiring by specifying VHOST_IOTLB_FLAG_RETIRE flag to fit for the case of vhost device IOTLB implementation. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-01vhost: allow per device message handlerJason Wang
This patch allow device to register its own message handler during vhost_dev_init(). vDPA device will use it to implement its own DMA mapping logic. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-3-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-01vhost: refine vhost and vringh kconfigJason Wang
Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is not necessarily for VM since it's a generic userspace and kernel communication protocol. Such dependency may prevent archs without virtualization support from using vhost. To solve this, a dedicated vhost menu is created under drivers so CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION. While at it, also squash Kconfig.vringh into vhost Kconfig file. This avoids the trick of conditional inclusion from VOP or CAIF. Then it will be easier to introduce new vringh users and common dependency for both vringh and vhost. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-01kdb: Censor attempts to set PROMPT without ENABLE_MEM_READDaniel Thompson
Currently the PROMPT variable could be abused to provoke the printf() machinery to read outside the current stack frame. Normally this doesn't matter becaues md is already a much better tool for reading from memory. However the md command can be disabled by not setting KDB_ENABLE_MEM_READ. Let's also prevent PROMPT from being modified in these circumstances. Whilst adding a comment to help future code reviewers we also remove the #ifdef where PROMPT in consumed. There is no problem passing an unused (0) to snprintf when !CONFIG_SMP. argument Reported-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2020-04-01kdb: Eliminate strncpy() warnings by replacing with strscpy()Daniel Thompson
Currently the code to manage the kdb history buffer uses strncpy() to copy strings to/and from the history and exhibits the classic "but nobody ever told me that strncpy() doesn't always terminate strings" bug. Modern gcc compilers recognise this bug and issue a warning. In reality these calls will only abridge the copied string if kdb_read() has *already* overflowed the command buffer. Thus the use of counted copies here is only used to reduce the secondary effects of a bug elsewhere in the code. Therefore transitioning these calls into strscpy() (without checking the return code) is appropriate. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2020-04-01NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()Trond Myklebust
When we detach a subrequest from the list, we must also release the reference it holds to the parent. Fixes: 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-01io_uring: add missing finish_wait() in io_sq_thread()Hillf Danton
Add it to pair with prepare_to_wait() in an attempt to avoid anything weird in the field. Fixes: b41e98524e42 ("io_uring: add per-task callback handler") Reported-by: syzbot+0c3370f235b74b3cfd97@syzkaller.appspotmail.com Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-01arm64: Kconfig: ptrauth: Add binutils version check to fix mismatchAmit Daniel Kachhap
Recent addition of ARM64_PTR_AUTH exposed a mismatch issue with binutils. 9.1+ versions of gcc inserts a section note .note.gnu.property but this can be used properly by binutils version greater than 2.33.1. If older binutils are used then the following warnings are generated, aarch64-linux-ld: warning: arch/arm64/kernel/vdso/vgettimeofday.o: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000 aarch64-linux-objdump: warning: arch/arm64/lib/csum.o: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000 aarch64-linux-nm: warning: .tmp_vmlinux1: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000 This patch enables ARM64_PTR_AUTH when gcc and binutils versions are compatible with each other. Older gcc which do not insert such section continue to work as before. This scenario may not occur with clang as a recent commit 3b446c7d27ddd06 ("arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH") masks binutils version lesser then 2.34. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> [catalin.marinas@arm.com: slight adjustment to the comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-01init/kconfig: Add LD_VERSION KconfigAmit Daniel Kachhap
This option can be used in Kconfig files to compare the ld version and enable/disable incompatible config options if required. This option is used in the subsequent patch along with GCC_VERSION to filter out an incompatible feature. Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-01Merge branch 'for-5.7/mcp2221' into for-linusJiri Kosina
2020-04-01Merge branch 'for-5.7/logitech' into for-linusJiri Kosina
- Logitech HID++ protocol support improvement from Filipe Laíns
2020-04-01Merge branch 'for-5.7/ish' into for-linusJiri Kosina
- C99 code purification in intel-ish-hid from Gustavo A. R. Silva
2020-04-01Merge branch 'for-5.7/glorious' into for-linusJiri Kosina
- report descriptor fix for Glorious PC Gaming Race device from Samuel Čavoj
2020-04-01thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDsGayatri Kammela
Tiger Lake's new unique ACPI device IDs for Intel thermal driver are not valid because of missing 'C' in the IDs. Fix the IDs by updating them. After the update, the new IDs should now look like INT1040 --> INTC1040 INT1043 --> INTC1043 Fixes: 9b1b5535dfc9 ("thermal: int340x_thermal: Add Tiger Lake ACPI device IDs") Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01platform/x86: intel-hid: fix: Update Tiger Lake ACPI device IDGayatri Kammela
Tiger Lake's new unique ACPI device IDs for intel-hid driver is not valid because of missing 'C' in the ID. Fix the ID by updating it. After the update, the new ID should now look like INT1051 --> INTC1051 Fixes: bdd11b654035 ("platform/x86: intel-hid: Add Tiger Lake ACPI device ID") Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01ACPI: Update Tiger Lake ACPI device IDsGayatri Kammela
Tiger Lake's new unique ACPI device IDs for DPTF and fan drivers are not valid as the IDs are missing 'C'. Fix the IDs by updating them. After the update, the new IDs should now look like INT1047 --> INTC1047 INT1040 --> INTC1040 INT1043 --> INTC1043 INT1044 --> INTC1044 Fixes: 55cfe6a5c582 ("ACPI: DPTF: Add Tiger Lake ACPI device IDs") Fixes: c248dfe7e0ca ("ACPI: fan: Add Tiger Lake ACPI device ID") Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01hrtimer: Don't dereference the hrtimer pointer after the callbackSebastian Andrzej Siewior
A hrtimer can be released in its callback, but lockdep_hrtimer_exit() dereferences the pointer after the callback returns, i.e. a potential use after free. Retrieve the context in which the hrtimer expires before the callback is invoked and use it in lockdep_hrtimer_exit(). Fixes: 40db173965c0 ("lockdep: Add hrtimer context tracing bits") Reported-by: syzbot+62c155c276e580cfb606@syzkaller.appspotmail.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200331201849.fkp2siy3vcdqvqlz@linutronix.de
2020-04-01ASoC: topology: use name_prefix for new kcontrol이경택
Current topology doesn't add prefix of component to new kcontrol. Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com> Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-01ASoC: rt5682: Fix build error without CONFIG_I2CYueHaibing
If I2C is n but SoundWire is m, building fails: sound/soc/codecs/rt5682.c:3716:1: warning: data definition has no type or storage class module_i2c_driver(rt5682_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/rt5682.c:3716:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] sound/soc/codecs/rt5682.c:3716:1: warning: parameter names (without types) in function declaration Guard this use #ifdef CONFIG_I2C. Fixes: 5549ea647997 ("ASoC: rt5682: fix unmet dependencies") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200401091055.34112-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-01ASoC: dpcm: allow start or stop during pause for backend이경택
soc_compr_trigger_fe() allows start or stop after pause_push. In dpcm_be_dai_trigger(), however, only pause_release is allowed command after pause_push. So, start or stop after pause in compress offload is always returned as error if the compress offload is used with dpcm. To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed for start or stop command. Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-01rtc: ds1307: add support for watchdog timer on ds1388Chris Packham
The DS1388 variant has watchdog timer capabilities. When using a DS1388 and having enabled CONFIG_WATCHDOG_CORE register a watchdog device for the DS1388. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200330025500.6991-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-01rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64Alexandre Belloni
Call the 64bit versions of rtc_tm time conversion. Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200306073548.57579-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-01rtc: da9052: set rangeAlexandre Belloni
The da9052 is an rtc valid from 2000 to 2063 (max year is 63). Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200306073548.57579-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-01rtc: da9052: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200329224240.776568-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-01Merge branch 'for-5.7/core' into for-linusJiri Kosina
- device-specific (ITE 8595) fix from Hans de Goede
2020-04-01Merge branch 'for-5.7/appleir' into for-linusJiri Kosina
- small code cleanups in hid-appleir from Lucas Tanure
2020-04-01Merge branch 'for-5.6/upstream-fixes' into for-linusJiri Kosina
- probe fix for Logitech-G* devices from Hans de Goede - error handling imrovement in hid-rmi from Christophe JAILLET
2020-04-01Merge tag 'irqchip-fixes-5.7-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip fixes from Marc Zygnier: - Partially revert Xilinx changes that break PPC systems
2020-04-01PM: sleep: core: Drop racy and redundant checks from device_prepare()Rafael J. Wysocki
Alan Stern points out that the WARN_ON() check in device_prepare() is racy (because the PM-runtime API can be disabled briefly for any device at any time and system suspend can start at any time too) and the pm_runtime_suspended() check in the computation of the direct_complete flag value is redundant (because it will be repeated later anyway). Drop both these checks accordingly. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01PM: hibernate: Propagate the return value of hibernation_restore()Dexuan Cui
If hibernation_restore() fails, the 'error' should not be zero. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01watchdog: Add K3 RTI watchdog supportTero Kristo
Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module which can be used as a watchdog. This IP provides a support for windowed watchdog mode, in which the watchdog must be petted within a certain time window. If it is petted either too soon, or too late, a watchdog error will be triggered. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200312095808.19907-4-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01dt-bindings: watchdog: Add support for TI K3 RTI watchdogTero Kristo
TI K3 SoCs contain an RTI (Real Time Interrupt) module which can be used to implement a windowed watchdog functionality. Windowed watchdog will generate an error if it is petted outside the time window, either too early or too late. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200312095808.19907-2-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01watchdog: ziirave_wdt: change name to be more specificLucas Stach
The RAVE watchdog is not a full system watchdog, but is used to reset ethernet switch when required. Change the name to better reflect this usage. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313101138.25915-1-l.stach@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01watchdog: orion: use 0 for unset heartbeatChris Packham
If the heartbeat module param is not specified we would get an error message watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range watchdog: f1020300.watchdog: falling back to default timeout (171) This is because we were initialising heartbeat to -1. By removing the initialisation (thus letting the C run time initialise it to 0) we silence the warning message and the default timeout is still used. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01ACPI: video: Use native backlight on Acer Aspire 5783zHans de Goede
The Acer Aspire 5783z shipped with Windows 7 and as such does not trigger our "win8 ready" heuristic for prefering the native backlight interface. Still ACPI backlight control doesn't work on this model, where as the native (intel_video) backlight interface does work. Add a quirk to force using native backlight control on this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01ACPI: video: Docs update for "acpi_backlight" kernel parameter optionsRandy Dunlap
Update the Documentation for "acpi_backlight" by adding 2 new options (native and none). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01nvme-tcp: fix possible crash in recv error flowSagi Grimberg
If the target misbehaves and sends us unexpected payload we need to make sure to fail the controller and stop processing the input stream. We clear the rd_enabled flag and stop the io_work, but we may still requeue it if we still have pending sends and then in the next invocation we will process the input stream as the check is only in the .data_ready upcall. To fix this we need to make sure not to self-requeue io_work upon a recv flow error. This fixes the crash: nvme nvme2: receive failed: -22 BUG: unable to handle page fault for address: ffffbeb5816c3b48 nvme_ns_head_make_request: 29 callbacks suppressed block nvme0n5: no usable path - requeuing I/O block nvme0n5: no usable path - requeuing I/O block nvme0n7: no usable path - requeuing I/O block nvme0n7: no usable path - requeuing I/O block nvme0n3: no usable path - requeuing I/O block nvme0n3: no usable path - requeuing I/O block nvme0n3: no usable path - requeuing I/O block nvme0n7: no usable path - requeuing I/O block nvme0n3: no usable path - requeuing I/O block nvme0n3: no usable path - requeuing I/O #PF: supervisor read access inkernel mode #PF: error_code(0x0000) - not-present page PGD 1039157067 P4D 1039157067 PUD 103915a067 PMD 102719f067 PTE 0 Oops: 0000 [#1] SMP PTI CPU: 8 PID: 411 Comm: kworker/8:1H Not tainted 5.3.0-40-generic #32~18.04.1-Ubuntu Hardware name: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015 Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] RIP: 0010:nvme_tcp_recv_skb+0x2ae/0xb50 [nvme_tcp] RSP: 0018:ffffbeb5806cfd10 EFLAGS: 00010246 RAX: ffffbeb5816c3b48 RBX: 00000000000003d0 RCX: 0000000000000008 RDX: 00000000000003d0 RSI: 0000000000000001 RDI: ffff9a3040684b40 RBP: ffffbeb5806cfd90 R08: 0000000000000000 R09: ffffffff946e6900 R10: ffffbeb5806cfce0 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9a2ff86501c0 R14: 00000000000003d0 R15: ffff9a30b85f2798 FS: 0000000000000000(0000) GS:ffff9a30bf800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffbeb5816c3b48 CR3: 000000088400a006 CR4: 00000000003626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp_read_sock+0x8c/0x290 ? __release_sock+0x9d/0xe0 ? nvme_tcp_write_space+0xb0/0xb0 [nvme_tcp] nvme_tcp_io_work+0x4b4/0x830 [nvme_tcp] ? finish_task_switch+0x163/0x270 process_one_work+0x1fd/0x3f0 worker_thread+0x34/0x410 kthread+0x121/0x140 ? process_one_work+0x3f0/0x3f0 ? kthread_park+0xb0/0xb0 ret_from_fork+0x35/0x40 Reported-by: Roy Shterman <roys@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-04-01Revert "irqchip/xilinx: Enable generic irq multi handler"Marc Zyngier
This reverts commit a0789993bf8266e62fea6b4613945ba081c71e7d, which breaks a number of PPC platforms. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/44b64be7-9240-fd52-af90-e0245220f38b@xilinx.com
2020-04-01Revert "irqchip/xilinx: Do not call irq_set_default_host()"Marc Zyngier
This reverts commit 9c2d4f525c002591f4e0c14a37663663aaba1656, which breaks a number of PPC platforms. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/44b64be7-9240-fd52-af90-e0245220f38b@xilinx.com
2020-04-01Revert "driver core: platform: Initialize dma_parms for platform devices"Greg Kroah-Hartman
This reverts commit 7c8978c0837d40c302f5e90d24c298d9ca9fc097, a new version will come in the next release cycle. Cc: <stable@vger.kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01Revert "amba: Initialize dma_parms for amba devices"Greg Kroah-Hartman
This reverts commit 5caf6102e32ead7ed5d21b5309c1a4a7d70e6a9f. It still needs some more work and that will happen for the next release cycle, not this one. Cc: <stable@vger.kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01gpio: export of_pinctrl_get to modulesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200401151904.6948af20@canb.auug.org.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-01powerpc: Make setjmp/longjmp signature standardClement Courbet
Declaring setjmp()/longjmp() as taking longs makes the signature non-standard, and makes clang complain. In the past, this has been worked around by adding -ffreestanding to the compile flags. The implementation looks like it only ever propagates the value (in longjmp) or sets it to 1 (in setjmp), and we only call longjmp with integer parameters. This allows removing -ffreestanding from the compilation flags. Fixes: c9029ef9c957 ("powerpc: Avoid clang warnings around setjmp and longjmp") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Clement Courbet <courbet@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
2020-04-01powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_typeLeonardo Bras
Before checking for cpu_type == NULL, this same copy happens, so doing it here will just write the same value to the t->oprofile_type again. Remove the repeated copy, as it is unnecessary. Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200215053637.280880-1-leonardo@linux.ibm.com
2020-04-01powerpc: Suppress .eh_frame generationNaveen N. Rao
GCC v8 defaults to enabling -fasynchronous-unwind-tables due to https://gcc.gnu.org/r259298, which results in .eh_frame section being generated. This results in additional disk usage by the build, as well as the kernel modules. Since the kernel has no use for this, this section is discarded. Add -fno-asynchronous-unwind-tables to KBUILD_CFLAGS to suppress generation of .eh_frame section. Note that our VDSOs need .eh_frame, but are not affected by this change since our VDSO code are all in assembly. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1ed7cd84a7d1a3180b30c0c60e70eed8bb8b40c3.1583415544.git.naveen.n.rao@linux.vnet.ibm.com
2020-04-01powerpc: Drop -fno-dwarf2-cfi-asmNaveen N. Rao
The original commit/discussion adding -fno-dwarf2-cfi-asm refers to R_PPC64_REL32 relocations not being handled by our module loader: http://lkml.kernel.org/r/20090224065112.GA6690@bombadil.infradead.org However, that is now handled thanks to commit 9f751b82b491d ("powerpc/module: Add support for R_PPC64_REL32 relocations"). So, drop this flag from our Makefile. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9b22a064de6eb1301d92177eb3a38559df7005d3.1583415544.git.naveen.n.rao@linux.vnet.ibm.com
2020-04-01powerpc/32: drop unused ISA_DMA_THRESHOLDMike Rapoport
The ISA_DMA_THRESHOLD variable is set by several platforms but never referenced. Remove it. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191125092033.20014-1-rppt@kernel.org
2020-04-01powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfacesShilpasri G Bhat
Commit bf9571550f52 ("powerpc/powernv: Add support to clear sensor groups data") added a mechanism to clear sensor-group data via a sysfs interface. However, the ABI for that interface has not been documented. This patch documents the ABI for the sysfs interface for sensor-groups and clearing the sensor-groups. This patch was originally sent by Shilpasri G Bhat on the mailing list: https://lkml.org/lkml/2018/8/1/85 Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1574776274-22355-1-git-send-email-ego@linux.vnet.ibm.com
2020-04-01selftests/powerpc: Fix try-run when source tree is not writableMichael Ellerman
We added a usage of try-run to pmu/ebb/Makefile to detect if the toolchain supported the -no-pie option. This fails if we build out-of-tree and the source tree is not writable, as try-run tries to write its temporary files to the current directory. That leads to the -no-pie option being silently dropped, which leads to broken executables with some toolchains. If we remove the redirect to /dev/null in try-run, we see the error: make[3]: Entering directory '/linux/tools/testing/selftests/powerpc/pmu/ebb' /usr/bin/ld: cannot open output file .54.tmp: Read-only file system collect2: error: ld returned 1 exit status make[3]: Nothing to be done for 'all'. And looking with strace we see it's trying to use a file that's in the source tree: lstat("/linux/tools/testing/selftests/powerpc/pmu/ebb/.54.tmp", 0x7ffffc0f83c8) We can fix it by setting TMPOUT to point to the $(OUTPUT) directory, and we can verify with strace it's now trying to write to the output directory: lstat("/output/kselftest/powerpc/pmu/ebb/.54.tmp", 0x7fffd1bf6bf8) And also see that the -no-pie option is now correctly detected. Fixes: 0695f8bca93e ("selftests/powerpc: Handle Makefile for unrecognized option") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200327095319.2347641-1-mpe@ellerman.id.au
generated by cgit (git 2.34.1) at 2025-09-14 09:09:03 +0000