| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade.
With setting up NR_PORTS to 16 to be able to use serial2 and higher
aliases and don't loose functionality which was intended by these changes.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ab262666018de6f4e206b021386b93ed0c164316.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RGB RAPIDFIRE
The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and
USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not
respond on boot, just like other Corsair keyboards
Signed-off-by: Jonathan Cox <jonathan@jdcox.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200410212427.2886-1-jonathan@jdcox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb_get_maximum_speed() function is part of the usb-common module,
so enable it by selecting the corresponding Kconfig symbol.
While at it, also make sure to depend on USB_SUPPORT because USB_PHY
requires that. This can lead to Kconfig conflicts if USB_SUPPORT is not
enabled while attempting to enable PHY_TEGRA_XUSB.
Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200330101038.2422389-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After PORT_RESET, the port is set to the appropriate
default_state. Ignore processing CC changes here as this
could cause the port to be switched into sink states
by default.
echo source > /sys/class/typec/port0/port_type
Before:
[ 154.528547] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms
[ 154.528560] CC1: 0 -> 0, CC2: 3 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 154.528564] state change PORT_RESET -> SNK_UNATTACHED
After:
[ 151.068814] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[ 151.072440] CC1: 3 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 151.172117] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 151.172136] pending state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED @ 870 ms [rev3 NONE_AMS]
[ 152.060106] state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED [delayed 870 ms]
[ 152.060118] Start toggling
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200402215947.176577-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For userspace functions using OS Descriptors, if a function also supplies
Extended Property descriptors currently the counts and lengths stored in
the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not
getting reset to 0 during an unbind or when the epfiles are closed. If
the same function is re-bound and the descriptors are re-written, this
results in those count/length variables to monotonically increase
causing the VLA allocation in _ffs_func_bind() to grow larger and larger
at each bind/unbind cycle and eventually fail to allocate.
Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in
ffs_data_reset().
Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support")
Cc: stable@vger.kernel.org
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Reviewed-by: Manu Gautam <mgautam@codeaurora.org>
Link: https://lore.kernel.org/r/20200402044521.9312-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Immediate submission in case of a babbling device can lead
to a busy loop. Introducing a delayed work.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Jonas Karlsson <jonas.karlsson@actia.se>
Link: https://lore.kernel.org/r/20200415151358.32664-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Suspend increments a counter, then kills the URBs,
then kills the scheduled work. The scheduled work, however,
may reschedule the URBs. Fix this by having the work
check the counter.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Jonas Karlsson <jonas.karlsson@actia.se>
Link: https://lore.kernel.org/r/20200415151358.32664-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A SCSI error handler and block runtime PM must not allocate
memory with GFP_KERNEL. Furthermore they must not wait for
tasks allocating memory with GFP_KERNEL.
That means that they cannot share a workqueue with arbitrary tasks.
Fix this for UAS using a private workqueue.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: f9dc024a2da1f ("uas: pre_reset and suspend: Fix a few races")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once a device is gone, the internal state does not matter anymore.
There is no need to spam the logs.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 326349f824619 ("uas: add dead request list")
Link: https://lore.kernel.org/r/20200415141750.811-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If queue->size check in raw_event_queue_fetch() fails (which normally
shouldn't happen, that check is a fail-safe), the function returns
without reenabling interrupts. This patch fixes that issue, along with
propagating the cause of failure to the function caller.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/9f7ce7a1472cfb9447f6c5a494186fa1f2670f6f.1586270396.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The copy_to/from_user() functions return the number of bytes remaining
but we want to return negative error codes. I changed a couple checks
in raw_ioctl_ep_read() and raw_ioctl_ep0_read() to show that we still
we returning zero on error.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20200406145119.GG68494@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit ef441dd6af91 ("usb: typec: mux: Allow the muxes to be named")
the typec_switch_desc and typec_mux_desc structs contain a name field.
The pi3usb30532 driver allocates these structs on the stack and so far did
not explicitly zero the mem used for the structs. This causes the new name
fields to point to a random memory address, which in my test case happens
to be a valid address leading to "interesting" mux / switch names:
[root@localhost ~]# ls -l /sys/class/typec_mux/
total 0
lrwxrwxrwx. 1 root root 0 Apr 14 12:55 ''$'\r''-switch' -> ...
lrwxrwxrwx. 1 root root 0 Apr 14 12:55 ''$'\320\302\006''2'$'...
Explicitly initialize the structs to zero when declaring them on the stack
so that any unused fields get set to 0, fixing this.
Fixes: ef441dd6af91 ("usb: typec: mux: Allow the muxes to be named")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200414133313.131802-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes a bug that causes the USB3 early console to freeze after
printing a single line on AMD machines because it can't parse the
Transfer TRB properly.
The spec at
https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
says in section "4.5.1 Device Context Index" that the Context Index,
also known as Endpoint ID according to
section "1.6 Terms and Abbreviations", is normally computed as
`DCI = (Endpoint Number * 2) + Direction`, which matches the current
definitions of XDBC_EPID_OUT and XDBC_EPID_IN.
However, the numbering in a Debug Capability Context data structure is
supposed to be different:
Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a
Debug Capability Context data structure has the endpoints mapped to indices
0 and 1.
Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add
XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and
let xdbc_handle_tx_event() handle both.
I have verified that with this patch applied, the USB3 early console works
on both an Intel and an AMD machine.
Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20200401074619.8024-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug
in the USB scatter-gather library:
BUG: KASAN: use-after-free in atomic_read
include/asm-generic/atomic-instrumented.h:26 [inline]
BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170
drivers/usb/core/hcd.c:1607
Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27
CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Workqueue: scsi_tmf_2 scmd_eh_abort_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x153/0x1cb mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192
__kasan_check_read+0x11/0x20 mm/kasan/common.c:95
atomic_read include/asm-generic/atomic-instrumented.h:26 [inline]
usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607
usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657
usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602
usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937
This bug occurs when cancellation of the S-G transfer races with
transfer completion. When that happens, usb_sg_cancel() may continue
to access the transfer's URBs after usb_sg_wait() has freed them.
The bug is caused by the fact that usb_sg_cancel() does not take any
sort of reference to the transfer, and so there is nothing to prevent
the URBs from being deallocated while the routine is trying to use
them. The fix is to take such a reference by incrementing the
transfer's io->count field while the cancellation is in progres and
decrementing it afterward. The transfer's URBs are not deallocated
until io->complete is triggered, which happens when io->count reaches
zero.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Matthias Blankertz <matthias.blankertz@cetitec.com>:
This fixes two issues in the snd-soc-rcar driver blocking multichannel
HDMI audio out: The parent SSI in a multi-SSI configuration is not
correctly set up and started, and the SSI->HDMI channel mapping is
wrong.
With these patches, the following device tree snippet can be used on an
r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on
HDMI0:
rsnd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi0 &ssi1 &ssi2 &ssi9>;
};
};
With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1)
and 8ch audio output should work.
Matthias Blankertz (2):
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
sound/soc/sh/rcar/ssi.c | 8 ++++----
sound/soc/sh/rcar/ssiu.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
base-commit: 7111951b8d4973bda27ff663f2cf18b663d15b48
--
2.26.0
|
|
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
conf.listen_interval can sometimes be zero causing wake_up_count
to wrap around up to many beacons too late causing
CTRL-EVENT-BEACON-LOSS as in.
wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ]
Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Michael Kerrisk suggested to replace numeric clock IDs with symbolic names.
Now the content of these files looks like this:
$ cat /proc/774/timens_offsets
monotonic 864000 0
boottime 1728000 0
For setting offsets, both representations of clocks (numeric and symbolic)
can be used.
As for compatibility, it is acceptable to change things as long as
userspace doesn't care. The format of timens_offsets files is very new and
there are no userspace tools yet which rely on this format.
But three projects crun, util-linux and criu rely on the interface of
setting time offsets and this is why it's required to continue supporting
the numeric clock IDs on write.
Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets")
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200411154031.642557-1-avagin@gmail.com
|
|
Although the vSGIs are not directly visible to the host, they still
get moved around by the CPU hotplug, for example. This results in
the kernel moaning on the console, such as:
genirq: irq_chip GICv4.1-sgi did not update eff. affinity mask of irq 38
Updating the effective affinity on set_affinity() fixes it.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When a vPE is made resident, the GIC starts parsing the virtual pending
table to deliver pending interrupts. This takes place asynchronously,
and can at times take a long while. Long enough that the vcpu enters
the guest and hits WFI before any interrupt has been signaled yet.
The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat.
In order to avoid the above, a (optional on GICv4, mandatory on v4.1)
feature allows the GIC to feedback to the hypervisor whether it is
done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit.
The hypervisor can then wait until the GIC is ready before actually
running the vPE.
Plug the detection code as well as polling on vPE schedule. While
at it, tidy-up the kernel message that displays the GICv4 optional
features.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf stat:
Jin Yao:
- Fix no metric header if --per-socket and --metric-only set
build system:
- Fix python building when built with clang, that was failing if the clang
version doesn't support -fno-semantic-interposition.
tools UAPI headers:
Arnaldo Carvalho de Melo:
- Update various copies of kernel headers, some ended up automatically
updating build-time generated tables to enable tools such as 'perf trace'
to decode syscalls and tracepoints arguments.
Now the tools/perf build is free of UAPI drift warnings.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The controller always supports link recovery for device in SS and SSP.
Remove the speed limit check. Also, when the device is in RESUME or
RESET state, it means the controller received the resume/reset request.
The driver must send the link recovery to acknowledge the request. They
are valid states for the driver to send link recovery.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Fixes: ee5cd41c9117 ("usb: dwc3: Update speed checks for SuperSpeedPlus")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
This patch adds support for r8a77961 (R-Car M3-W+).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
This patch adds support for r8a77961 (R-Car M3-W+).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
This patch adds support for r8a77961 (R-Car M3-W+).
To avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+
(R8A77961), this patch also updates the comment of
"renesas,xhci-r8a7796".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
The qcom-qusb2-phy.txt file was converted and renamed to yaml.
Update cross-reference accordingly.
Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Currently the calculation of max packet size limit for IN endpoints is
too restrictive. This prevents a matching of a capable hardware endpoint
during configuration. Below is the minimum recommended HW configuration
to support a particular endpoint setup from the databook:
For OUT endpoints, the databook recommended the minimum RxFIFO size to
be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) +
clock crossing margin (16 bytes).
For IN endpoints, the databook recommended the minimum TxFIFO size to be
at least 3x MaxPacketSize for endpoints that support burst. If the
endpoint doesn't support burst or when the device is operating in USB
2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended.
Base on these recommendations, we can calculate the MaxPacketSize limit
of each endpoint. This patch revises the IN endpoint MaxPacketSize limit
and also sets the MaxPacketSize limit for OUT endpoints.
Reference: Databook 3.30a section 3.2.2 and 3.2.3
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Change the macro name DWC3_GTXFIFOSIZ_TXFDEF to DWC3_GTXFIFOSIZ_TXFDEP
to match with the register name GTXFIFOSIZ.TXFDEP.
Fixes: 457e84b6624b ("usb: dwc3: gadget: dynamically re-size TxFifos")
Fixes: 0cab8d26d6e5 ("usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
When building with Clang + -Wtautological-pointer-compare:
drivers/usb/gadget/udc/bdc/bdc_ep.c:543:28: warning: comparison of
address of 'req->queue' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
~~~~~^~~~~ ~~~~
drivers/usb/gadget/udc/bdc/bdc_ep.c:543:51: warning: comparison of
address of 'req->usb_req' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
~~~~~^~~~~~~ ~~~~
2 warnings generated.
As it notes, these statements will always evaluate to false so remove
them.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Link: https://github.com/ClangBuiltLinux/linux/issues/749
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Add missing module firmware for turings.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4njTRpiNqOC54iRjpd=nu3pBG8i_fp8o_dp7AZE6hFWA@mail.gmail.com
|
|
ASB was failing to load on Turing GPUs when firmware is being loaded
from initramfs, leaving the GPU in an odd state and causing suspend/
resume to fail.
Add missing MODULE_FIRMWARE() lines for initramfs generators.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 5.6
|
|
syzbot writes:
> KASAN: use-after-free Read in dput (2)
>
> proc_fill_super: allocate dentry failed
> ==================================================================
> BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline]
> BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846
> Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426
>
> CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x188/0x20d lib/dump_stack.c:118
> print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
> __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
> kasan_report+0x33/0x50 mm/kasan/common.c:625
> fast_dput fs/dcache.c:727 [inline]
> dput+0x53e/0xdf0 fs/dcache.c:846
> proc_kill_sb+0x73/0xf0 fs/proc/root.c:195
> deactivate_locked_super+0x8c/0xf0 fs/super.c:335
> vfs_get_super+0x258/0x2d0 fs/super.c:1212
> vfs_get_tree+0x89/0x2f0 fs/super.c:1547
> do_new_mount fs/namespace.c:2813 [inline]
> do_mount+0x1306/0x1b30 fs/namespace.c:3138
> __do_sys_mount fs/namespace.c:3347 [inline]
> __se_sys_mount fs/namespace.c:3324 [inline]
> __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324
> do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
> RIP: 0033:0x45c889
> Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889
> RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000
> RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013
Looking at the code now that it the internal mount of proc is no
longer used it is possible to unmount proc. If proc is unmounted
the fields of the pid namespace that were used for filesystem
specific state are not reinitialized.
Which means that proc_self and proc_thread_self can be pointers to
already freed dentries.
The reported user after free appears to be from mounting and
unmounting proc followed by mounting proc again and using error
injection to cause the new root dentry allocation to fail. This in
turn results in proc_kill_sb running with proc_self and
proc_thread_self still retaining their values from the previous mount
of proc. Then calling dput on either proc_self of proc_thread_self
will result in double put. Which KASAN sees as a use after free.
Solve this by always reinitializing the filesystem state stored
in the struct pid_namespace, when proc is unmounted.
Reported-by: syzbot+72868dd424eb66c6b95f@syzkaller.appspotmail.com
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Fixes: 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.
Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.
Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix the following gcc warning:
fs/ext4/ext4_jbd2.c:341:30: warning: variable 'es' set but not used [-Wunused-but-set-variable]
struct ext4_super_block *es;
^~
Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200402034759.29957-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix the following gcc warning:
fs/ext4/super.c:599:27: warning: variable 'es' set but not used [-Wunused-but-set-variable]
struct ext4_super_block *es;
^~
Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200402033939.25303-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:
Inode 12, i_size is 147456, should be 163840. Fix? no
Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.
CC: stable@vger.kernel.org
Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The documentation comments for ext4_read_block_bitmap_nowait and
ext4_read_inode_bitmap describe them as returning NULL on error, but
they return an ERR_PTR on error; update the documentation to match.
The documentation comment for ext4_wait_block_bitmap describes it as
returning 1 on error, but it returns -errno on error; update the
documentation to match.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Ritesh Harani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/60a3f4996f4932c45515aaa6b75ca42f2a78ec9b.1585512514.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since commit a8ac900b8163 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.
However commit 85c8f176a611 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.
It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.
Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a611 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Found a read performance issue when linux kernel page size is 64KB.
If linux kernel page size is 64KB and mount options cache=strict &
vers=2.1+, it does not support cifs_readpages(). Instead, it is using
cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is
much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern
SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB
(for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to
determine whether server support readpages() and improve read performance
for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more
cleaner to initialize server->max_read to server->maxBuf.
The client is a linux box with linux kernel 4.2.8,
page size 64KB (CONFIG_ARM64_64K_PAGES=y),
cpu arm 1.7GHz, and use mount.cifs as smb client.
The server is another linux box with linux kernel 4.2.8,
share a file '10G.img' with size 10GB,
and use samba-4.7.12 as smb server.
The client mount a share from the server with different
cache options: cache=strict and cache=none,
mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy>
mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy>
The client download a 10GbE file from the server across 1GbE network,
dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240
dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240
Found that cache=strict (without patch) is slower read throughput and
smaller read IO size than cache=none.
cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB
cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB
cache=none: read throughput 109MB/s, read IO size is 1MB
Looks like if page size is 64KB,
cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops,
/* check if server can support readpages */
if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
inode->i_data.a_ops = &cifs_addr_ops;
maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(),
(SMB2_MAX_BUFFER_SIZE is 64KB)
SMB2_negotiate():
/* set it to the maximum buffer size value we can send with 1 credit */
server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
SMB2_MAX_BUFFER_SIZE);
CIFSSMBNegotiate():
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
Page size 64KB and cache=strict lead to read_pages() use cifs_readpage()
instead of cifs_readpages(), and then cifs_read() using maximum read IO
size 16KB, which is much slower than maximum read IO size 1MB.
(CIFSMaxBufSize is 16KB by default)
/* FIXME: set up handlers for larger reads and/or convert to async */
rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We already dump these keys for SMB3, lets also dump it for SMB2
sessions so that we can use the session key in wireshark to check and validate
that the signatures are correct.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
